Performance of Streptomyces rimosus biomass in biosorption of heavy metals from aqueous solutions

Comprehensive review on toxic heavy metals in the aquatic system: sources, identification, treatment strategies, and health risk assessment

Heavy metal pollution in water sources has become a major worldwide environmental issue, posing a threat to aquatic ecosystems and human health. The pollution of the aquatic environment is increasing as a result of industrialization, climate change, and urban development. The sources of heavy metal pollution in water include mining waste, leachates from landfills, municipal and industrial wastewater, urban runoff, and natural events such as volcanism, weathering, and rock abrasion. Heavy metal ions are toxic and potentially carcinogenic. They can also buildup in biological systems and cause bioaccumulation even at low levels of exposure, heavy metals can cause harm to organs such as the nervous system, liver and lungs, kidneys and stomach, skin, and reproductive systems. There were various approaches tried to purify water and maintain water quality. The main purpose of this article was to investigate the occurrence and fate of the dangerous contaminants (Heavy metal and metalloids) found in domestic and industrial effluents. This effluent mixes with other water streams and is used for agricultural activities and other domestic activities further complicating the issue. It also discussed conventional and non-conventional treatment methods for heavy metals from aquatic environments. Conclusively, a pollution assessment of heavy metals and a human health risk assessment of heavy metals in water resources have been explained. In addition, there have been efforts to focus on heavy metal sequestration from industrial waste streams and to create a scientific framework for reducing heavy metal discharges into the aquatic environment.

One-step synthesis of phytic acid-assisted hydrochar boost selective sorption and in situ passivation of lanthanum

The rare earth metal element lanthanum (La) possesses carcinogenic, genotoxic, and accumulative properties, necessitating urgent development of an efficient and cost-effective method to remove La. However, current sorbents still encounter challenges such as poor selectivity, low sorption capacity, and high production costs. This study therefore proposes a promising solution: the creation of phytic acid-assisted sludge hydrochars (P-SHCs) to eliminate La from water and soil environments. This method harnesses phytic acid's exceptional binding ability and the economical hydrothermal carbonization process. P-SHCs exhibit robust sorption affinity, fast sorption kinetics, and excellent sorption selectivity for La when compared with pristine hydrochars (SHCs). This advantage arises from the remarkable binding ability of phosphate functional groups (polyphosphates) on P-SHCs, forming P-O-La complexes. Moreover, P-SHCs demonstrate sustained sorption efficiency across at least five cycles, with a slight decrease attributed to the loss of phosphorus species and mass during recycling. Furthermore, P-SHCs demonstrated superior economic feasibility, with a higher estimated cost-benefit ratio than that of other sorbents. Our study further validates the exceptional passivation capability of P-SHCs, showcasing relative stabilization efficiency ranging from 37.6 % to 79.6 % for La contamination. Additionally, acting as soil passivation agents, P-SHCs foster the enrichment of specific soil microorganisms such as Actinobacteria and Proteobacteria, capable of solubilizing phosphorus and resisting heavy metals. These findings present novel ideas and technical support for employing P-SHCs in combatting environmental pollution stemming from rare earth metals.

Heavy metals/-metalloids (As) phytoremediation with Landoltia punctata and Lemna sp. (duckweeds): coupling with biorefinery prospects for sustainable phytotechnologies

Heavy metals/-metalloids can result in serious human health hazards. Phytoremediation is green bioresource technology for the remediation of heavy metals and arsenic (As). However, there exists a knowledge gap and systematic information on duckweed-based metal phytoremediation in an eco-sustainable way. Therefore, the present review offers a critical discussion on the effective use of duckweeds (genera Landoltia and Lemna)-based phytoremediation to decontaminate metallic contaminants from wastewater. Phytoextraction and rhizofiltration were the major mechanism in 'duckweed bioreactors' that can be dependent on physico-chemical factors and plant-microbe interactions. The biotechnological advances such as gene manipulations can accelerate the duckweed-based phytoremediation process. High starch and protein contents of the metal-loaded duckweed biomass facilitate their use as feedstock in biorefinery. Biorefinery prospects such as bioenergy production, value-added products, and biofertilizers can augment the circular economy approach. Coupling duckweed-based phytoremediation with biorefinery can help achieve Sustainable Development Goals (SDGs) and human well-being.

Single cell ICP-MS to evaluate the interaction behaviour for Cd, Ce and U with Streptomyces coelicolor spores

Streptomyces are important soil bacteria used for bioremediation of metal-contaminated soils, however, it is still unknown how metal-selective Streptomyces are and which mechanisms are involved during their capture. In this work, we exposed S. coelicolor spores to environmentally relevant concentrations (0.1, 1, 10, 100 μM) of Ce, U and Cd in solid medium for one week to investigate the uptake behaviour of hyphae in the newly formed spores. Additionally, metal adsorption onto the spores was explored by incubating inactive, ungerminated spores for one day in aqueous metal solution. The spore-washing treatment was key to distinguishing between strongly spore-associated (e.g. incorporation; Tris-EDTA buffer) and weakly spore-associated metals (Tris buffer alone minus Tris-EDTA). Single cell (sc) ICP-MS was used to quantify metal-associated content in individual spores. Our results revealed element-specific adsorption onto inactive spores showing that out of the total metal exposure, both strongly (Ce: 58%; U: 54%; Cd: 28%) and weakly (Ce: 12%; U: 1%; Cd: 18%) adsorbed metals occur. However, scICP-MS showed that from metal-amended solid medium, only Ce and U were strongly spore-associated (averages 0.040 and 0.062 fg spore-1 for 10 μM exposures, respectively) while Cd was below the limit of detection (< 0.006 fg spore-1). We propose that hyphae only metabolically interact with Ce in a controlled manner but uncontrolled with U, as 66-73% Ce and only 2-4% U were inherited from adsorbed content. We conclude that Streptomyces spore-metal interaction starts with a relevant adsorption step of Ce, U and Cd as presented for aqueous conditions. If spores start to germinate, hyphae are capable of effectively encapsulating Ce and U, but not Cd. This study brings light into the still unknown field of metal interactions with Streptomyces and applied understanding for more efficient and metal-specific use of Streptomyces in bioremediation of metal-polluted soils.

Upcycling Waste Streams from a Biorefinery Process-A Case Study on Cadmium and Lead Biosorption by Two Types of Biopolymer Post-Extraction Biomass

This study investigated the possibility of using the spent kind of biomass of Pseudomonas putida CA-3 and Zobelella denitrificans MW1 obtained after the pilot-scale production of polyhydroxyalkanoates (PHAs) as a biosorbent for the bioremediation of aqueous solutions containing toxic cadmium and lead ions. The material was characterized by means of scanning electron microscopy, Fourier-transformed infrared spectroscopy, nuclear magnetic resonance spectroscopy and amino acid profiling. To check the sorption capacity of spent biomass against Pb and Cd ions, equilibrium studies were performed. To learn about the nature of the sorption process, kinetic modelling was carried out and the obtained results showed that the adsorption process is best described by the pseudo-second-order kinetic model (PSO), which suggests that the sorption process is connected with the chemical bonding of the ions on the sorbent surface. Information provided by the amino acid profile made it possible to predict the adsorption mechanism and FTIR analysis proved the participation of different chemical groups in the removal process. According to the equilibrium studies, the best-fitted isotherm was the Freundlich model for all used materials and metal ions considering the correlation coefficient. Summarizing the results, the spent biomass after the PHA production is an effective biosorbent and can be reused for heavy metal bioremediation.

Potential and prospects of Actinobacteria in the bioremediation of environmental pollutants: Cellular mechanisms and genetic regulations

Increasing industrialization and anthropogenic activities have resulted in the release of a wide variety of pollutants into the environment including pesticides, polycyclic aromatic hydrocarbons (PAHs), and heavy metals. These pollutants pose a serious threat to human health as well as to the ecosystem. Thus, the removal of these compounds from the environment is highly important. Mitigation of the environmental pollution caused by these pollutants via bioremediation has become a promising approach nowadays. Actinobacteria are a group of eubacteria mostly known for their ability to produce secondary metabolites. The morphological features such as spore formation, filamentous growth, higher surface area to volume ratio, and cellular mechanisms like EPS secretion, and siderophore production in Actinobacteria render higher resistance and biodegradation ability. In addition, these bacteria possess several oxidoreductase systems (oxyR, catR, furA, etc.) which help in bioremediation. Actinobacteria genera including Arthrobacter, Rhodococcus, Streptomyces, Nocardia, Microbacterium, etc. have shown great potential for the bioremediation of various pollutants. In this review, the bioremediation ability of these bacteria has been discussed in detail. The utilization of various genera of Actinobacteria for the biodegradation of organic pollutants, including pesticides and PAHs, and inorganic pollutants like heavy metals has been described. In addition, the cellular mechanisms in these microbes which help to withstand oxidative stress have been discussed. Finally, this review explores the Actinobacteria mediated strategies and recent technologies such as the utilization of mixed cultures, cell immobilization, plant-microbe interaction, utilization of biosurfactants and nanoparticles, etc., to enhance the bioremediation of various environmental pollutants.

Microbiome enrichment from contaminated marine sediments unveils novel bacterial strains for petroleum hydrocarbon and heavy metal bioremediation

Petroleum hydrocarbons and heavy metals are some of the most widespread contaminants affecting marine ecosystems, urgently needing effective and sustainable remediation solutions. Microbial-based bioremediation is gaining increasing interest as an effective, economically and environmentally sustainable strategy. Here, we hypothesized that the heavily polluted coastal area facing the Sarno River mouth, which discharges >3 tons of polycyclic aromatic hydrocarbons (PAHs) and ∼15 tons of heavy metals (HMs) into the sea annually, hosts unique microbiomes including marine bacteria useful for PAHs and HMs bioremediation. We thus enriched the microbiome of marine sediments, contextually selecting for HM-resistant bacteria. The enriched mixed bacterial culture was subjected to whole-DNA sequencing, metagenome-assembled-genomes (MAGs) annotation, and further sub-culturing to obtain the major bacterial species as pure strains. We obtained two novel isolates corresponding to the two most abundant MAGs (Alcanivorax xenomutans strain-SRM1 and Halomonas alkaliantarctica strain-SRM2), and tested their ability to degrade PAHs and remove HMs. Both strains exhibited high PAHs degradation (60-100%) and HMs removal (21-100%) yield, and we described in detail >60 genes in their MAGs to unveil the possible genetic basis for such abilities. Most promising yields (∼100%) were obtained towards naphthalene, pyrene and lead. We propose these novel bacterial strains and related genetic repertoire to be further exploited for effective bioremediation of marine environments contaminated with both PAHs and HMs.

Characterization of soil microbial community activity and structure for reducing available Cd by rice straw biochar and Bacillus cereus RC-1

The combination of biochar and specific bacteria has been widely applied to remediate Cadmium-contaminated soil. But little is known about how such composites affect the dynamic distribution of metal fractions. This process is accompanied by the alternations of soil properties and microbial community structures. Composite of rice straw biochar and Bacillus cereus RC-1 were applied to investigate its impacts on Cd alleviation and soil microbial diversity and structure. The bacterial/biochar composite treatment decreased the fraction of HOAc-extractable Cd by 38.82%, and increased residual Cd by 23.95% compared to the untreated control. Moreover, compared with the untreated control, the composite treatment significantly increased the soil pH by about 1.5 units, and the activities of catalase, urease and invertase enzymes were increased by 42.39%, 30.50% and 31.20%, respectively. Composite treatment increased soil bacterial and fungal alpha diversity, the relative abundance of Bacillus, Streptomyces, Arthrobacter, and Aspergillus species were also increased. Mantel test and correlation analysis indicated that the effects associated with fungal communities in influencing soil properties were lower than that those of bacterial communities by different treatment. Aggregated boosted tree (ABT) models analysis showed that soil chemical proprieties (as determined by SOM, CEC, AN, etc.,) contributed over 50% of the changes in bacterial and fungal communities by the composite treatment. The co-occurrence network results showed that all treatments enhanced the correlation between OUT groups and improved the possible relationships in the bacterial and fungal communities, especially the interrelationships between bacteria and fungi after the Cd fractions stabilized. These findings provide a new insight to optimal strategies for the remediation of Cd-contaminated soil.

Advances in biological methods for the sequestration of heavy metals from water bodies: A review

Pollution is a major concern of the modern era as it affects all the principal aspects of the environment, especially the hydrosphere. Pollution with heavy metals has unequivocally threatened aquatic bodies and organisms as these metals are persistent, non-biodegradable, and toxic. Heavy metals tend to accumulate in the environment and eventually in humans, which makes their efficient removal a topic of paramount importance. Treatment of metal-contaminated water can be done both via chemical and biological methods. Where remediation through conventional methods is expensive and generates a large amount of sludge, biological methods are favoured over older and prevalent chemical purification processes because they are cheaper and environment friendly. The present review attempts to summarise effective methods for the remediation of water contaminated with heavy metals. We concluded that in biological techniques, bio-sorption is among the most employed and successful mechanisms because of its high efficacy and eco-friendly nature.

Screening of Spirulina strains for high copper adsorption capacity through Fourier transform infrared spectroscopy

Microalgae have emerged as promising biosorbents for the removal of toxic metals from industrial effluents due to the presence of various free functional groups. While the constitutes are distinct among different algal strains, it needs to screen the algae with high adsorption capacities for heavy metal ions by analyzing the algal components. In this study, a rapid and nondestructive Fourier transform infrared (FTIR) method combined PCA algorithm was used to discriminate algal strains according to their cellular components. With FTIR spectroscopy, we have found that the algal strains for high copper adsorption capacity (RH44, XS58, AH53, and RZ22) can be well differentiated from other strains via assessing the components involved in the biosorption of copper ions at the spectral window range of 1,200–900 cm⁻¹ mainly attributed to polysaccharides. Correspondingly, the copper removal efficiency by different Spirulina strains was also measured by biochemical assay and scanning electron microscopy (SEM) in order to confirm the screening result. Compared with the chemical measurement, the assessment based on spectral features appears fairly good in the evaluation and differentiation of copper adsorption capacity in various Spirulina strains. This study illustrates that FTIR spectroscopy may serve as a fast and effective tool to investigate the functional groups for copper ions binding in the Spirulina cell and it even offers a useful and accurate new approach to rapidly assess potential adsorbents for the high capacity of copper adsorption.

Preconcentrations of Zn(II) and Hg(II) in Environmental and Food Samples by SPE on B. licheniformis Loaded Amberlite XAD-4

In this work, the separations and preconcentrations of Zn(II) and Hg(II) ions on Bacillus lichenifoemis loaded onto Amberlite XAD-4 resin by solid-phase extraction has been performed. The biosorbent was characterized by using FT-IR, SEM, and EDX. pH, sample flow rate, eluent type and concentration, amount of B. licheniformis and XAD-4 resin, sample volume, and possible interfering ions effect were investigated in details as experimental variables in the SPE procedure. Limit of detection values for Zn(II) and Hg(II) were detected as 0.03 and 0.06 ng mL^-1, respectively. 0.2-15 ng mL^-1 linear range values were achieved for Zn(II) and Hg(II), respectively. Relative standard deviation values were found to be lower than 5%. For validation of the procedure, the certified standard reference materials (CWW-TM-D, EU-L-2, NCS ZC73O14, NCS ZC73350) were analyzed. The concentrations of Zn(II) and Hg(II) in water and food samples were measured by ICP-OES. Consequently, it can be inferred that the immobilized B. licheniformis microcolumn has ideal selectivity for Zn(II) and Hg(II) biosorption.

Industrial wastewater treatment: Current trends, bottlenecks, and best practices

Rapid urbanization and industrialization have inextricably linked to water consumption and wastewater generation. Mining resources from industrial wastewater has proved to be an excellent source of secondary raw materials i.e., proficient for providing economic and financial benefits, clean and sustainable resilient environment, and achieving sustainable development goals (SDGs). Treatment of industrial wastewater for reusable resources has become a tedious task for decision-makers due to several bottlenecks and barriers, such as inefficient treatment options, high-cost expenditure, poor infrastructure, lack of financial support, and technical know-how. Most of the existing methods are conventional and fails to provide an economic benefit to the industries and have certain disadvantages. Also, the untreated industrial wastewater is discharged into the open drains, lakes, and rivers that lead to environmental pollution and severe health hazards. This paper has consolidated information about the current trends, opportunities, bottlenecks, and best practices associated with wastewater treatment and scope for the advancement in the existing technologies. Along with the efficient resource recovery, the wastewater could be ideally explored in the development of value-added materials, energy, and product recovery. The concepts, such as the circular economy (CE), partitions-release-recover (PRR), and transforming wastewater into bio factory are anticipated to be more convenient options to tackle the industrial wastewater menace.

Cu transport and distribution in different cellular fractions of Klebsiella oxytoca strain CAV 1374

This study elucidated copper (Cu) transport and trafficking mechanisms at the cellular interface using the Cu-resistant strain Klebsiella oxytoca CAV 1374. The optimum conditions for biosorption were determined by investigating uptake rates due to initial pH, initial Cu concentrations, and maximum tolerated concentrations (MTC) of Cu. Cellular fraction analysis and depth-profiling XPS were used to comprehensively evaluate the spatial-temporal distribution of Cu on cellular interfaces during biosorption. Potential uptake mechanisms were then further examined by biosorption kinetics analyses, ion exchange experiments, FTIR analysis, and K⁺ channel blocking experiments. The results indicated that Cu was primarily absorbed by extracellular polymeric substances through chemical interactions and little Cu penetrated inside cells under low Cu stress conditions (≤20 mg/L). In contrast, an intracellular rate-controlling physical interaction was predominant under high Cu stress conditions (≥30 mg/L). Further, Cu²⁺ could be bound by functional groups, followed first by replacement of Ca²⁺ at the cell surface. Subsequently, some of the Cu²⁺ in cell walls was reduced to Cu⁺, and only Cu⁺ could then penetrate into cell membranes. These results indicate that strain Klebsiella oxytoca CAV 1374 is a suitable biosorbent agent for Cu removal and can provide critical insights into Cu-uptake mechanisms of microorganisms.

Biosorption of LMW PAHs on activated sludge aerobic granules under varying BOD loading rate conditions

Polycyclic aromatic hydrocarbons belong to the main priority substances for the aquatic environment. One of the emission sources of these compounds to environment is wastewater discharged from conventional wastewater treatment systems, which are not designed to cope with this type of pollution. Thus, due to the widely discussed properties of aerobic granular activated sludge in the literature - a conducted study has proven its ability to remove LMW PAHs (naphthalene (Nap), acenaphthylene (Acy), acenaphthene (Ace), fluorene (Flu), phenanthrene (Phe) and anthracene (Ant)) from wastewater by biosorption process at varying loadings of organic compounds expressed as BOD (kg/kg·d) on the activated sludge mass. The maximum biosorption of Nap was 605 µg/kg_d.m., Acy equals to 134 µg/kg_d.m., Ace equals to 355 µg/kg_d.m. Flu equals to 104 µg/kg_d.m. Phe equal to 204 µg/kg_d.m. and Ant equal to 173 µg/kg_d.m. The study showed that the BOD loading rate is one of the factors affecting the biosorption process of LMW PAHs. However, as the amount of adsorbed LMW PAHs increased, the condition of aerobic granular activated sludge deteriorated, which was evidenced by gradual increase in the values of technological parameters of activated sludge (SVI, HRT, SRT) and a smaller increase in activated sludge dry mass.

Restoration of heavy metal-contaminated soil and water through biosorbents: A review of current understanding and future challenges

Heavy metal pollution in soil and water is a potential threat to human health as it renders food quality substandard. Different biosorbents such as microbial and agricultural biomass have been exploited for heavy metal immobilization in soil and sorptive removal in waters. Biosorption is an effective and sustainable method for heavy metal removal in soil and water, but the inherent challenges are to find cheap, selective, robust, and cost-effective bioadsorbents. Microbial and agricultural biomass and their modified forms such as nanocomposites and carbonaceous materials (viz., biochar, nanobiochar, biocarbon), might be useful for sequestration of heavy metals in soil via adsorption, ion exchange, complexation, precipitation, and enzymatic transformation mechanisms. In this review, potential biosorbents and their metal removal capacity in soil and water are discussed. The microbial adsorbents and modified composites of agricultural biomasses show improved performance, stability, reusability, and effectively immobilize heavy metals from soil and water. In the future, researchers may consider the modified composites, encapsulated biosorbents for soil and water remediation.

Effects of magnetic biochar-microbe composite on Cd remediation and microbial responses in paddy soil

There is growing global interest in the bioremediation of cadmium (Cd) using combinations of biochar and microorganisms. However, the interactions among biochar, introduced and indigenous microorganisms remain unclear. Accordingly, a 90 day microcosm experiment was conducted to investigate this by adding Bacillus sp. K1 strain inoculated rice straw biochar (SBB) and magnetic straw biochar (MBB) into a Cd contaminated paddy soil from Hunan, China. All treatments were incubated aerobically (60% water holding capacity) or anaerobically for 90 d. During both soil incubations, Bacillus sp. K1 successfully colonized in soil with composites applications. Soil pH was significantly increased from acid to neutral, and available Cd decreased with the addition of both composites. The better remediation efficiency of MBB than SBB under anerobic conditions was attributed to the transformation of acetic acid-extractable Cd into the residual fraction, caused by Cd²⁺ bonding with crystal Fe₃O₄. The application of the two kinds of composites caused similar changes to both microbial communities. There was a slight decrease in indigenous microbial alpha diversity with the MBB aerobic application, while the total population number of bacteria was increased by 700%. Both the redundancy analysis and Mantel analyses indicated that pH and microbial biomass C contributed to the colonization of Bacillus sp. K1 with SBB under aerobic conditions, and with MBB under anerobic conditions, respectively. The research provides a new insight into interactive effects and investigates immobilization mechanisms involved of bacterial/biochar composites in anaerobic and aerobic soils.

Escherichia coli templated iron oxide biomineralization under oscillation

Motility is significant in organisms. Studying the influence of motility on biological processes provides a new angle in understanding the essence of life. Biomineralization is a representative process for organisms in forming functional materials. In the present study, we investigated the biomineralization of iron oxides templated by Escherichia coli (E. coli) cells under oscillation. The formation of iron oxide minerals with acicular and banded morphology was observed. The surface charge of E. coli cells contributed to the biomineralization process. The surface components of E. coli cells including lipids, carbohydrates and proteins also have roles in regulating the formation and morphology of iron oxide minerals. As-prepared mineralized iron oxide nanomaterials showed activity in photocatalytic degradation of methylene blue as well as in electrocatalytic hydrogen evolution reaction. This study is helpful not only in understanding motility in biological processes, but also in developing techniques for fabricating functional nanomaterials.

Novel application of isolated Micrococcus luteus and Bacillus pumilus for Li+ ion biosorption: a comparative study

In this study, Li⁺ biosorption profiles of Micrococcus luteus and Bacillus pumilus bacterial strains were investigated. Comparative surface characterization of the biomasses revealed that B. pumilus had a significantly greater surface negativity than the other, which had a direct positive effect on the ability to attract the Li⁺ ions. Biosorption experiments showed that B. pumilus cell had more efficient performance at all pH and initial Li⁺ concentration values in the ranges of 3.0-10.0 and 2.5-20.0 mg/L, respectively. The maximum adsorption capacities obtained at initial Li⁺ concentration of 20.0 mg/L and pH 9.0 were 1.160 mg Li⁺/g (167.1 µmol/g) and 2.280 mg Li⁺/g (328.5 µmol/g) for M. luteus and B. pumilus, respectively. For all the cases studied, the biosorption equilibrium was reached very quickly, suggesting that physical interaction dominated this process. Experimental data were found to be compatible with both Langmuir and Freundlich models under the studied experimental conditions. This study highlights the idea that B. pumilus bacterial strain will be a new and preferred biosorbent for Li⁺ ions by providing a low cost, rapid and quite efficient process.

Removal of heavy metals from industrial sludge with new plant-based washing agents

Washing is one of the techniques for permanent removal of heavy metals from industrial sludge, for which washing agents are a key influence factor. However, high-efficiency, eco-friendly, and inexpensive agents are still lacking. In this study, the solutions derived from the three plant materials including Fatsia japonica, Hovenia acerba and Pterocarya stenoptera were employed to remove Cd, Cu, Pb, and Ni from industrial sludge. The effects of washing solution concentration, pH, washing time and temperature on metal removal were investigated. The metal removal efficiencies were found to increase with increasing solution concentrations or washing temperatures, decline with increasing pH, and presented various trends with increasing washing time. Among the three agents that derived from H. acerba showed relatively high removal for Cu (75.81%), Pb (63.42%), Ni (27.52%), and Cd (56.99%). After washing, environmental risks of residual metals were markedly diminished in sludge, attributable to decrease in their exchangeable forms. Furthermore, the applications of the plant washing agents increased sludge organic carbon, alkali-hydrolysable nitrogen, available phosphorus, and available potassium. Fourier transform infrared spectroscopy analysis suggested that the hydroxyl, carboxyl, ether, and amide may be the main functional groups in the three plant materials binding the heavy metals. Overall, the agent derived from H. acerba appears to be a feasible washing material for heavy metals removal from sludge.

A comparative investigation of lithium(I) biosorption properties of Aspergillus versicolor and Kluyveromyces marxianus

In the current batch study, lithium(I) ion sorption behaviors of Aspergillus versicolor fungus and newly isolated Kluyveromyces marxianus yeast were investigated comparatively. Surface and structural characterization studies of the biosorbents carried out with Fourier transform infrared spectrometer (FTIR), scanning electron microscope (SEM), surface area and zeta potential analyses showed that isolated K. marxianus yeast from salty wastes has more preferable properties (i.e. higher porosity, surface area and negativity) for cation sorption. Biosorption studies also supported this estimation; higher lithium(I) sorption capacities were obtained with K. marxianus cells at all experimental conditions studied. Rapid sorption profiles of the sorbents demonstrated that physical interaction is the main mechanism in this system. The effects of pH and initial lithium(I) concentration on the lithium(I) sorption capacities of biosorbents were examined. The maximum adsorption capacities of 347.9 and 409.2 μmol lithium(I)/g biosorbent were obtained at an initial lithium(I) concentration of 20 mg/L at pH 9.0 using A. versicolor and K. marxianus, respectively. The equilibrium data fitted both Langmuir and Freundlich models in the concentration ranges studied. This study revealed that K. marxianus yeast can be used for effective, rapid and low cost capture process of lithium(I) ions from aqueous solutions.

Nickel ion removal from aqueous solutions through the adsorption process: a review

Recently, removal of nickel ions has been gaining a lot of attention because of the negative impact of nickel ions on the environment. The aim of this review paper is to organize the scattered available information on removal of nickel ions from aqueous solutions through the adsorption process. Survey on investigated materials suggests that composite- and polymer-based adsorbents have the most effective capability for nickel adsorption. The composite material class, i.e. CaCO3-maltose, followed by biopolymer-based material showed the highest Ni(II) adsorption capacity of 769.23 and 500 mg/g, respectively. The importance of treatment parameters (i.e. pH, temperature, contact time, and metal ion concentration) is discussed, together with their effect on the underlying physicochemical phenomena, giving particular attention to the adsorption/desorption mechanism. It was ascertained that adsorption of nickel ions is pH dependent and the optimal pH range for adsorption of Ni(II) ions was in range of 6–8. In general, nickel adsorption is an endothermic and spontaneous process that mainly occurs by forming a monolayer on the adsorbent (experimental data are often fitted by Langmuir isotherms and pseudo-second-order kinetics). Regeneration (i.e. desorption) is also reviewed, suggesting that acidic eluents (e.g. HCl and HNO3) allow, in most of the cases, an efficacious spent adsorbent recovery. The percentage use of desorption agents followed the order of acids (77%) > chelators (8.5%) > alkalis (8%) > salts (4.5%) > water (2%). Helpful information about adsorption and desorption of nickel ions from aqueous solutions is provided.

Modeling heavy metal removal by retention on Laurus nobilis leaves biomass: linear and nonlinear isotherms and design

Heavy metal industries pose a serious threat to the environment. Conventional methods used for heavy metal removal are generally not always low-cost and environmentally friendly. So, researchers focused to investigate alternative biosorbents for the uptake of heavy metal. In this study, Laurus nobilis leaves (LNL) were used as a biosorbent for the uptake of toxic metals such as Pb²⁺ and Cd²⁺ from aqueous solutions. Batch biosorption experiments under varied conditions, such as biosorbent dosage, solution pH, heavy metal concentration, biosorption time, ionic strength, humic acid effect and competitive metal ions (Cd(II), Pb(II), Cu(II) and Zn(II)) were performed. The biomass was characterized using FT-IR spectra and SEM images. The nonlinearized and linearized isotherm models were compared and discussed. A single-stage batch bioreactor system for each heavy metal based on the best fit nonlinear isotherm model also has been presented. The biosorption of Pb(II) on LNL fitted better in the Langmuir model and Cd(II) biosorption fitted better in the Freundlich model by nonlinearized equations. The LNL exhibited the maximum monolayer biosorption capacities (q_max) of 7.1 and 32.5 mg/g for cadmium and lead, respectively. LNL showed great potential especially in Pb(II) uptake. LNL may be promising for heavy metal removal from aqueous environment.

Removal and tolerance mechanism of Pb by a filamentous fungus: A case study

Currently, Pb pollution has become a severe environmental problem and filamentous fungi hold a promising potential for the treatment of Pb-containing wastewater. The present study showed that the strain Pleurotus ostreatus ISS-1 had a strong ability to tolerate Pb at high concentration and reached a removal rate of 53.7% in liquid media. Pb was removed by extracellular biosorption, intracellular bioaccumulation by mycelia, or precipitation with extracellular oxalic acids. On the cellular level, Pb was mainly distributed in the cell wall, followed by vacuoles and organelles. Fourier transform infrared spectroscopy (FTIR) analysis indicated that hydroxyl, amides, carboxyl, and sulfhydryl groups provided binding sites for Pb. Furthermore, Pb was found on the cell surface in the form of PbS and PbCO₃ through X-ray diffraction (XRD). Intracellular chelates such as thiol compounds and oxalic acid, as well as extracellular oxalic acid, might play an important role in the tolerance of Pb. In addition, isobaric tags for relative and absolute quantitation (iTRAQ) analysis showed that ATP-binding cassette (ABC) transporter, cytochrome P450, peroxisome, and the calcium signaling pathway might participate in both accumulation and detoxification of Pb. These results have successfully provided a basis for further developing Pb polluted water treatment technology by fungi.