Single drop microextraction coupled with liquid chromatography-tandem mass spectrometry (SDME-LC-MS/MS) for determination of ranitidine in water samples

High-throughput semi-automated emulsive liquid-liquid microextraction for detecting SDHI fungicides in water, juice, and alcoholic beverage samples via UHPLC-MS/MS

Herein, a High-Throughput Semi-automated Emulsive Liquid-Liquid Microextraction (HTSA-ELLME) method was developed to detect Succinate Dehydrogenase Inhibitor (SDHI) fungicides in food samples via UHPLC-MS/MS. The Oil-in-Water (O/W) emulsion comprising a hydrophobic extractant and water was dilutable with the aqueous sample solution. Upon injecting the primary emulsion into the sample solution, a secondary O/W emulsion was formed, allowing SDHI fungicides to be extracted. Subsequently, a NaCl-saturated solution was injected in the secondary O/W emulsion as a demulsifier to rapidly separate the extractant, eliminating the need for centrifugation. A 12-channel electronic micropipette was used to achieve a high-throughput semi-automation of the novel sample pretreatment. The linear range was 0.003-0.3 μg L-1 with R2 > 0.998. The limit of detection was 0.001 μg L-1. The HTSA-ELLME method successfully detected SDHI fungicides in water, juice, and alcoholic beverage samples, with recoveries and relative standard deviations of 82.6-106.9% and 0.8-5.8%, respectively. Unlike previously reported liquid-liquid microextraction approaches, the HTSA-ELLME method is the first to be both high-throughput and semi-automated and may aid in designing pesticide pretreatment processes in food samples.

Dual techniques for trace copper determination: DES/Dithizone based liquid phase microextraction-flame atomic absorption spectrophotometry and digital image based colorimetric probe

In this study, a sample preparation procedure was developed to preconcentrate copper ions from aqueous samples for determination by flame atomic absorption spectrometry (FAAS) and digital image based colorimetry (DIC) systems. This was achieved by complexing copper ions with dithizone (Cu-DZ) and extracting the complex from aqueous solution in a single step. For the DES/DZ-FAAS system, a low detection limit of 2.3 ng mL-1 was recorded over a broad and linear working range. For the DIC system, the linear relationship between the change in red color intensity of the red-green-blue (RGB) color scale and the concentration of copper in the Cu-DZ complex was utilized for the validation of the method. The DIC system also recorded a broad and linear working range with a satisfactory detection limit of 14.7 ng mL-1. Spike recovery experiments performed with eucalyptus tea extracts yielded high recovery results in the range of 91-107%.

GC Analysis of Metformin, Ranitidine and Famotidine from Pharmaceuticals and Human Serum

A method has been designed based on gas chromatography with flame ionization detection (FID) for the separation and analyses of ranitidine, famotidine and metformin after pre-column derivatization with trifluoroacetylacetone and ethyl chloroformate. DB-1 (30 m × 0.32 mm id) column with film thickness 0.25 μm was used for the separation at an initial temperature of column was 100°C for 2 min, and ramping at 20°C/min up to 250°C, with a hold time of 3 min. The rate of nitrogen flow was 2.5 mL/min and FID was used for detection. Complete separation was obtained between all the three drugs including excess of derivatization reagents. Linear calibration curves and detection limits were obtained in the ranges 0.1-30 μg/mL and 0.011-0.015 μg/mL. The procedure was repeatable in terms of peak heights/peak areas and retention time (n = 5) for derivatization, quantitation and separation with relative standard deviations (RSDs) within 2.0-3.0%. The approach was examined for the analyses of drug products and serum after the intake of the drugs by healthy volunteers, and recoveries were obtained within 95-98% with RSDs 2.4-3.1%.

Green Extraction Techniques as Advanced Sample Preparation Approaches in Biological, Food, and Environmental Matrices: A Review

Green extraction techniques (GreETs) emerged in the last decade as greener and sustainable alternatives to classical sample preparation procedures aiming to improve the selectivity and sensitivity of analytical methods, simultaneously reducing the deleterious side effects of classical extraction techniques (CETs) for both the operator and the environment. The implementation of improved processes that overcome the main constraints of classical methods in terms of efficiency and ability to minimize or eliminate the use and generation of harmful substances will promote more efficient use of energy and resources in close association with the principles supporting the concept of green chemistry. The current review aims to update the state of the art of some cutting-edge GreETs developed and implemented in recent years focusing on the improvement of the main analytical features, practical aspects, and relevant applications in the biological, food, and environmental fields. Approaches to improve and accelerate the extraction efficiency and to lower solvent consumption, including sorbent-based techniques, such as solid-phase microextraction (SPME) and fabric-phase sorbent extraction (FPSE), and solvent-based techniques (μQuEChERS; micro quick, easy, cheap, effective, rugged, and safe), ultrasound-assisted extraction (UAE), and microwave-assisted extraction (MAE), in addition to supercritical fluid extraction (SFE) and pressurized solvent extraction (PSE), are highlighted.

Single-drop microextraction technique for the determination of antibiotics in environmental water

Growing concerns related to antibiotic residues in environmental water have encouraged the development of rapid, sensitive, and accurate analytical methods. Single-drop microextraction has been recognized as an efficient approach for the isolation and preconcentration of several analytes from a complex sample matrix. Thus, single-drop microextraction techniques are cost-effective and less harmful to the environment, subscribing to green analytical chemistry principles. Herein, an overview and the current advances in single-drop microextraction for the determination of antibiotics in environmental water are presented were included. In particular, two main approaches used to perform single-drop microextraction (direct immersion-single-drop microextraction and headspace-single-drop microextraction) are reviewed. Furthermore, the impressive analytical features and future perspectives of single-drop microextraction are discussed in this review. This article is protected by copyright. All rights reserved.

Facile and highly efficient three-phase single drop microextraction in-line coupled with capillary electrophoresis

A high-performance version of in-line, three-phase direct immersion-single drop microextraction (DI-SDME) coupled with capillary electrophoresis (CE) was demonstrated using a commercial CE instrument, and all the major and minor details were described to provide an easy-to-follow and user-friendly protocol. The excellent sample cleanup and enrichment power of this method was demonstrated with nonsteroidal anti-inflammatory drugs (NSAIDs) in human urine. The only preparation of urine samples was the addition of HCl to acidify the urine sample to pH 2. The acidic NSAIDs in the acidified urine sample were extracted into a basic acceptor drop covered with a thin organic layer attached to the inlet tip of a capillary immersed in the sample. A simple but powerful DI-SDME-CE method could be carried out automatically without any modification of the existing CE instrument. For improved performance, sample agitation and heating were employed by installing a microstirrer and a thermostating jacket in the sample tray. With 10 min of DI-SDME at 35°C with stirring, NSAIDs such as ketoprofen, ibuprofen, and naproxen in urine were enriched 340-970-fold with intraday and interday RSDs of 0.8-2.4% and 1.1-3.6%, respectively. The LODs obtained with in-line coupled CE/UV were 10-50 nM (2-10 µg/L). The performance of DI-SDME-CE/UV was also demonstrated by determining the naproxen level in human urine collected 24 h after taking a single oral dose of the drug. The spike recovery of naproxen from a single-point standard addition to the urine sample was 80%. Our high-performance three-phase DI-SDME-CE method is quite promising for the analysis of ionizable trace analytes in a complex sample matrix.

Solution decomposition of deep eutectic solvents in pH-induced solidification of floating organic droplet homogeneous liquid-liquid microextraction for the extraction of pyrethroid pesticides from milk

In this study, a pH-induced solidification of floating organic droplet homogeneous liquid-liquid microextraction procedure using deep eutectic solvent decomposition was developed for the extraction of five pyrethroid insecticides from milk samples prior to their analysis by using a gas chromatography-flame ionization detector. To reach this goal, the sample was transferred into a glass test tube and its proteins were precipitated with trichloroacetic acid. After centrifugation, the supernatant phase was transferred into another test tube and a few microliters of menthol: p-aminophenol deep eutectic solvent were dissolved in the solution and shaken to obtain a homogeneous solution. Then a few microliters of ammonia solution were added to the solution and the mixture was sonicated to break down the homogeneous solution. By doing so, the deep eutectic solvent was decomposed and menthol was formed throughout the solution as tiny droplets. In the following, the tube was transferred into an ice bath to solidify the extraction solvent on the solution surface. The collected phase was removed and melted at room temperature and an aliquot of it was analyzed by using a determination system. The validation outcomes confirmed that the method provides high extraction recoveries (72-84%) and high enrichment factors (257-299) with acceptable repeatability (relative standard deviations ≤6.4%). Low limits of detection (1.1-2.4 ng mL^-1) and quantification (3.6-8.1 ng mL^-1) were obtained using this approach. Finally, several milk samples were analyzed and deltamethrin was successfully determined in some samples.

Recent applications of microextraction sample preparation techniques in biological samples analysis

Analysis of biological samples is affected by interfering substances with chemical properties similar to those of the target analytes, such as drugs. Biological samples such as whole blood, plasma, serum, urine and saliva must be properly processed for separation, purification, enrichment and chemical modification to meet the requirements of the analytical instruments. This causes the sample preparation stage to be of undeniable importance in the analysis of such samples through methods such as microextraction techniques. The scope of this review will cover a comprehensive summary of available literature data on microextraction techniques playing a key role for analytical purposes, methods of their implementation in common biological samples, and finally, the most recent examples of application of microextraction techniques in preconcentration of analytes from urine, blood and saliva samples. The objectives and merits of each microextration technique are carefully described in detail with respect to the nature of the biological samples. This review presents the most recent and innovative work published on microextraction application in common biological samples, mostly focused on original studies reported from 2017 to date. The main sections of this review comprise an introduction to the microextraction techniques supported by recent application studies involving quantitative and qualitative results and summaries of the most significant, recently published applications of microextracion methods in biological samples. This article considers recent applications of several microextraction techniques in the field of sample preparation for biological samples including urine, blood and saliva, with consideration for extraction techniques, sample preparation and instrumental detection systems.

Miniaturized analytical methods for determination of environmental contaminants of emerging concern - A review

The determination of contaminants of emerging concern (CECs) in environmental samples has become a challenging and critical issue. The present work focuses on miniaturized analytical strategies reported in the literature for the determination of CECs. The first part of the review provides brief overview of CECs whose monitoring in environmental samples is of particular significance, namely personal care products, pharmaceuticals, endocrine disruptors, UV-filters, newly registered pesticides, illicit drugs, disinfection by-products, surfactants, high technology rare earth elements, and engineered nanomaterials. Besides, an overview of downsized sample preparation approaches reported in the literature for the determination of CECs in environmental samples is provided. Particularly, analytical methodologies involving microextraction approaches used for the enrichment of CECs are discussed. Both solid phase- and liquid phase-based microextraction techniques are highlighted devoting special attention to recently reported approaches. Special emphasis is placed on newly developed materials used for extraction purposes in microextraction techniques. In addition, recent contributions involving miniaturized analytical flow techniques for the determination of CECs are discussed. Besides, the strengths, weaknesses, opportunities and threats of point of need and portable devices have been identified and critically compared with chromatographic methods coupled to mass chromatography. Finally, challenging aspects regarding miniaturized analytical methods for determination of CECs are critically discussed.

Derivatization and deep eutectic solvent-based air-assisted liquid-liquid microextraction of salbutamol in exhaled breath condensate samples followed by gas chromatography-mass spectrometry

A microwave-induced air-assisted liquid-liquid microextraction method has been proposed for the pretreatment/quantization of salbutamol in exhaled breath condensate (EBC) samples prior to gas chromatography-mass spectrometry. In this procedure, 1-fluoro-2,4-dinitrobenzene and N,N-diethylethanolammonium chloride: dichloroacetic acid: octanoic acid deep eutectic solvent were exploited as derivatization reagent and extraction solvent, respectively. A mixture of the sample solution and pyridine was transferred into a test tube. Then, a mixture of extraction solvent and derivatization agent was placed at the bottom of the tube. After performing the predetermined extraction cycles in the microextraction method, the mixture was exposed to microwave irradiations to enhance derivatization and extraction efficiencies. The obtained turbid solution was centrifuged and a portion of the sedimented phase was used for quantification of salbutamol. The validated method showed low limits of detection (0.074 and 0.370 μg/L in deionized water and EBC, respectively), quantification (0.246 in deionized water and 1.23 μg/L in EBC), and lower limit of quantification (0.123 and 0.615 μg/L in deionized water and EBC, respectively). The method had appropriate repeatability, accuracy, and stability (expressed as relative standard deviation less than 9%). The developed method was used in quantification of salbutamol in the real samples collected from donors receiving salbutamol spray.

On-Line Sorbentless Cryogenic Needle Trap and GC–FID Method for the Extraction and Analysis of Trace Volatile Organic Compounds from Soil Samples

In this study, an automated sorbentless cryogenic needle trap device (ASCNTD) coupled with a gas chromatograph (GC) was developed with the aim of sampling, pre-concentration and determination of volatile organic compounds (VOCs) from soil sample. This paper describes optimization of relevant parameters, performance evaluation and an illustrative application of ASCNTD. The ASCNTD system consists of a 5 cm stainless steel needle passed through a hollow ceramic rod which is coiled with resistive nichrome wire. The set is placed in a PVC (Polyvinyl chloride) chamber through which liquid nitrogen can flow. The headspace components are circulated with a pump to pass through the needle, and this results in freeze-trapping of the VOCs on the inner surface of the needle. When extraction is completed, the analytes trapped in the inner wall of the needle were thermally desorbed and swept by the carrier gas into the GC capillary column. The parameters being effective on the extraction processes, namely headspace flow rate, the temperature and time of extraction and desorption were optimized and evaluated. The developed technique was compared to the headspace solid-phase microextraction method for the analysis of soil samples containing BTEX (Benzene, Toluene, Ethylbenzene and Xylene). The relative standard deviation values are below 8% and detection limits as low as 1.2 ng g−1 were obtained for BTEX by ASCNTD.

Direct immersion single-drop microextraction of semi-volatile organic compounds in environmental samples: A review

Single-drop microextraction (SDME) techniques are efficient approaches to pretreatment of aqueous samples. The main advantage of SDME lies in the miniaturization of the solvent extraction process, minimizing the hazards associated with the use of toxic organic solvents. Thus, SDME techniques are cost-effective, and represent less harm to the environment, subscribing to green analytical chemistry principles. In practice, two main approaches can be used to perform SDME - direct immersion (DI)-SDME and headspace (HS)-SDME. Even though the DI-SDME has been shown to be quite effective for extraction and enrichment of various organic compounds, applications of DI-SDME are normally more suitable for moderately polar and non-polar semi-volatile organic compounds (SVOCs) using organic solvents which are immiscible with water. In this review, we present a historical overview and current advances in DI-SDME, including the common analytical tools which are usually coupled with DI-SDME. The review also focuses on applications concerning SVOCs in environmental samples. Currents trends in DI-SDME and possible future direction of the procedure are discussed.