Multi-wavelength calibration: Determination of trace toxic elements in medicine plants by ICP OES

Determination of trace elements and electrolyte levels in kidney tissue of simvastatin-treated septic rats

Trace elements are cofactors in various enzymes in the antioxidant defense and cell homeostasis required in the tissue during inflammation. In acute kidney injury induced by lipopolysaccharide (LPS), renal cells are affected by cytotoxicity. Renal evacuation and gastrointestinal absorption rates are important in regulating plasma levels of trace elements. Simvastatin is a widely used anti-lipidemic drug with known anti-inflammatory effects. This study aimed to examine the effect of simvastatin on trace elements and electrolyte levels in kidney tissue in rats with LPS-induced sepsis. Adult male Wistar albino rats were divided into four groups: control, LPS (20 mg/kg, i.p., single dose), simvastatin (20 mg/kg, o.p., 5 days), and LPS + Simvastatin (LPS + Sim). Sodium, potassium, calcium, magnesium, selenium, zinc, copper, and histological structural changes were examined in kidney tissue samples 4 h after LPS execution. The inductively coupled plasma optical emission spectroscopy technique (ICP-OES) was used to determine the tissue trace element levels. In rats with sepsis-induced LPS, selenium, calcium, sodium, and magnesium levels significantly decreased while copper, potassium, and zinc levels significantly increased compared to other experimental groups. In sepsis treated with the simvastatin (LPS + Simvastatin) group, trace elements and electrolyte levels are like the control groups, apart from selenium levels. Selenium levels were significantly decreased in the LPS + Simvastatin group compared to the controls. As a result of examining the kidney tissues under a light microscope, simvastatin improved tissue damage caused by LPS-induced acute kidney injury. LPS-induced renal injury and simvastatin caused significant changes in the oxidant/antioxidant system. In septic rats, simvastatin was shown to balance some trace element levels, and it may improve damage in the kidney tissue.

Impacts of long-term irrigation with coalmine effluent contaminated water on trace metal contamination of topsoil and potato tubers in Dinajpur area, Bangladesh

Rapid depletion of groundwater and climate change mediated shifting precipitation pattern is forcing farmers to look for alternative irrigation options like wastewater. However, routine irrigation with trace metal contaminated wastewaters could potentially pollute soil as well as cause health risks through the consumption of food products grown in contaminated soil. Thus, the present study aimed to investigate the trace metals build-up status in topsoil and potato (Solanum tuberosum L.) tubers upon continuous irrigation with coalmine effluent contaminated wastewater compared to irrigation with groundwater and surface water over three consecutive years. Soil pollution status and human health risk associated with consumption of potato tubers grown on wastewater-irrigated soil was also assessed in this study. Three separate experimental sites differing in irrigation source (groundwater, surface water, and coalmine wastewater) were selected near Barapukuria Coal Mining Company Limited located at Parbatipur upazilla of Dinajpur district, Bangladesh. Nine trace metals namely arsenic (As), cadmium (Cd), chromium (Cr), copper (Cu), iron (Fe), manganese (Mn), nickel (Ni), lead (Pb), and zinc (Zn) were estimated. Results showed significantly higher trace metal content in both soil and potato tubers due to wastewater irrigation. Wastewater suitability for irrigation regarding Cd, Cr, Cu, Fe, Ni and Pb were off the permissible level although the soil contamination with trace metals and their levels in potato tubers remained within the safety limit. Health risk assessment revealed that, consumption of potato tubers grown in wastewater-irrigated soil remained safe although health risk associated with Cr was almost at the border. The study exclusively highlighted the core massage that, trace metal contamination of both soil and potatoes cultivated in them was increasing alarmingly due to three years of wastewater-irrigation. Although the extent of contamination was below critical limit, it can potentially become hazardous in years to come unless wastewater-irrigation is checked. This study was successful to provide valuable insights regarding the potential environmental and human health threats that might arise due to unmindful irrigation of contaminated coalmine wastewater. Besides, this study should prove useful in strategizing safety measures for cropping under trace metal contaminated soils and for planning industrial effluent disposal to avoid agricultural soil contamination.

Toxic Elemental Impurities in Herbal Weight Loss Supplements; A Study Using ICP-OES Microwave-Assisted Digestion

The tendency of using weight loss herbal preparations is continuously increasing, especially for the widespread consumption of junk food that is characterized by high calories. Weight loss herbal preparations are considered a type of food supplement product, and, as such, the regulations governing their quality control might be minimal. These products could be locally formulated in any country or internationally imported. Being non-controlled products, the herbal weight-loss products may contain high levels of elemental impurities that might exceed the permissible ranges. Moreover, these products contribute to the total daily intake (TDI) of such elements, which might represent concerns about their potential toxicological danger. In this research, the elemental contents in such products were investigated. The inductively coupled plasma with optical emission spectrometer (ICP-OES) was used to determine the levels of 15 elemental contents, namely, Na, K, Ca, Mg, Al, Cu, Fe, Li, Mn, As, Co, Cr, Cd, Ni and Pb. The results showed that seven micro-elements, namely Cd, Co, Ni, Cr, Pb, Li and Cu, were either not detectable or at a concentration much lower than their tolerable limits. However, all studied macro-elements (Na, K, Ca and Mg), together with Fe, were found at considerable, yet safe levels. On the other hand, Mn, Al and As contents showed perturbing levels in some of the studied products. Finally, a conclusion was highlighted for the necessity for stricter surveillance of such herbal products.

Trace Element Levels in Nails of Residents of Addis Ababa Are Shaped by Social Factors and Geography

The Akaki catchment in Ethiopia is home to Addis Ababa and about five million people. Its watercourses receive a variety of wastes released by the residents and industries. River water is being used for irrigation, livestock watering, and other domestic purposes. This study tested the hypothesis that the river pollution would be reflected in higher levels of trace elements in the nails of residents living in Akaki-Kality Sub-City in the downstream, as compared to those living in Gullele Sub-City in the upstream of the Akaki catchment. Samples were taken and subsequently analysed for metals using inductively coupled plasma optical emission spectrometry (ICP-OES). The mean concentrations of Fe, Zn, Cu, Mn, Ni, Cr, Pb, and As in nails from Akaki-Kality were 488 ± 49, 106 ± 10, 5.2 ± 0.3, 13 ± 1.5, 11 ± 8, 2.2 ± 0.3, 0.09 ± 0.01, and 0.16 ± 0.01 μg/g, respectively. Likewise, the concentrations of Fe, Zn, Cu, Mn, Ni, Cr, Pb, and As in nails from Gullele were 1035 ± 135, 251 ± 10, 6.6 ± 0.4, 31 ± 3.7, 7.4 ± 1.7, 2.0 ± 0.3, 0.63 ± 0.01, and 0.25 ± 0.01 μg/g, respectively. Co and Cd were not detected. Contrary to the initial hypothesis, higher metal levels were found in nails of residents living in the upstream rather than the downstream area of the catchment. In particular, the concentrations of Fe (p = 0.000), Zn (p = 0.01), and Mn (p = 0.000) were significantly elevated in nails from Gullele and also high in comparison with internationally reported values. Besides, geography and social factors, especially education level, correlated to trace metals in nails. Most of the elements were significantly lower in the nails of individuals with a university degree compared to those who were illiterate or only completed primary school.

Evaluation of Trace Element and Heavy Metal Levels of Some Ethnobotanically Important Medicinal Plants Used as Remedies in Southern Turkey in Terms of Human Health Risk

Heavy metal accumulation in medicinal plants has increased dramatically in recent years due to agricultural and industrial activities leading to pollution of natural sources. This study is focused on the concentration of trace elements and heavy metals in aboveground parts of 33 medicinal plants from the Eastern Mediterranean of Turkey. Results showed that the Al concentrations varied between 4.368 and 1104.627, the B level varied between 47.850 and 271.479, Ca values ranged between 1971.213 and 22,642.895, Cd concentrations ranged between 0.011 and 0.651, Cr contents varied between 1.371 and 41.692, Cu values varied between 13.278 and 42.586, Fe concentrations varied between 20.705 and 1276.783, K levels ranged between 652.143 and 14,440.946, Mg concentrations varied from 336.871 to 1869.486, Mn contents varied between 46.383 and 849.492, Na concentrations varied between 167.144 and 3401.252, Ni values varied between 0.065 and 9.968, Pb levels ranged between 1.311 and 16.238, and Zn concentrations ranged between 67.250 and 281.954 mg kg^-1, respectively. Furthermore, Recommended Dietary Allowance (RDA) values for trace elements and estimated daily intake (EDI), target hazard quotient (THQ), and hazard index (HI) for heavy metals were calculated. The concentrations of heavy metals in some studied plants distributed in industrial and mining regions were found as slightly higher than the acceptable limits determined by WHO. Consequently, in order to prevent this heavy metal accumulation, when collecting medicinal aromatic plants, rural areas, close to clean rivers, or mountainous areas should be preferred, away from highway, mining, and industrial areas.

Multidimensional Scaling of the Mineral Nutrient Status and Health Risk Assessment of Commonly Consumed Fruity Vegetables Marketed in Kyrgyzstan

Intensive production of fruits and vegetables causes heavy metal accumulation. Consumption of this kind of foodstuff is a growing concern of the modern world with the additional distress of the supply of enough foodstuffs. To contribute to this global purpose, this research aimed to find out the mineral nutrient and heavy metal concentrations of commonly consumed fruity vegetables in Kyrgyzstan. Totally, ten different fruity type vegetables were collected from five different large bazaars of Kyrgyzstan. From these, 20 samples, including washed/unwashed rinds of vegetables, were quantified in terms of their B, Ca, Cd, Cr, Cu, Fe, K, Mg, Mn, Na, Ni, Pb, and Zn contents by using inductively coupled plasma-optical emission spectrometry (ICP-OES). The concentrations of the fruity vegetables were found in the following range: B (1.392-25.816), Ca (92.814-4095.466), Cd (0.007-0.086), Cr (0.009-0.919), Cu (0.351-8.351), Fe (4.429-126.873), K (920.124-10,135.995), Mg (61.973-879.085), Mn (1.113-78.938), Na (36.132-266.475), Ni (0.039-1.215), Pb (0.081-2.906), and Zn (1.653-87.107) (mg kg^-1). It was determined that red capia pepper was the vegetable having the highest daily nutritional value according to evaluation done in our study. Taking into account of the HI values, all of the vegetables analyzed were determined to be lower than the limit value of 1 that falls into acceptable limits in terms of being safe. Peppers demonstrated the highest variation in terms of the elemental content. The high Cr content rendered hot pepper risky for consumption by both genders regarding with CR, and in terms of CR, it has been observed that nickel contents being found in vegetables including tomatoes pose a moderate risk for consumption. Quite lower risk was detected in red/Brandy-wine tomatoes, eggplants, and cucumber for both genders. As most striking result in our study, the Brandy-wine type tomato was found to be healthiest (as well as safest) and nutritious vegetable looking from the viewpoint of consumption in Kyrgyzstan.

Simultaneous quantification of seven multi-class organic molecules by single-shot dilution differential pulse voltammetric calibration

The contamination of water sources by anthropogenic activities is a topic of growing interest in the scientific community. Therefore, robust analytical techniques for the determination and quantification of multiple substances are needed, which often require complex and time-consuming procedures. In this context, we describe a univariate calibration method to determine emerging multi-class contaminants in different water sources. The instrumental setup is composed of a lab-made glass electrochemical cell with three electrodes: Pt counter, Ag/AgCl reference, and BDD working electrodes. With this system, we were able to simultaneously quantify tert-butylhydroquinone, acetaminophen, estrone, sulfamethoxazole, enrofloxacin, caffeine, and ibuprofen by differential pulse voltammetry. Only two calibration solutions are required for the Single-shot Dilution Differential Pulse Voltammetric Calibration (SSD-DP-VC) method described here, which can significantly improve sample throughput. Two robust univariate calibration strategies were also applied and compared with SSD-DP-VC. The new method is simple, fast, and comparable with traditional calibration methods, showing similar precision and accuracy for all determinations evaluated.

Applied Analytical Methods for Detecting Heavy Metals in Medicinal Plants

For thousands of years, medicinal plants (MPs) have been one of the main sources of drugs worldwide. However, recently, heavy metal pollution has seriously affected the quality and safety of MPs. Consuming MPs polluted by heavy metals such as Pb, Hg, and Cu significantly threaten the health of consumers. To manage this situation, the levels of heavy metals in MPs must be controlled. In recent years, this field has attracted significant attention, but few researchers have systematically summarized various analytical methods. Therefore, it is necessary to investigate methods that can accurately and effectively detect the amount of heavy metals in MPs. Herein, some important analytical methods used to detect heavy metals in MPs and their applications have been introduced and summarized in detail. These include atomic absorption spectrometry, atomic fluorescence spectrometry, inductively coupled plasma mass spectrometry, inductively coupled plasma atomic emission spectrometry, X-ray fluorescence spectrometry, neutron activation analysis, and anodic stripping voltammetry. The characteristics of these methods were subsequently compared and analyzed. In addition, high-performance liquid chromatography, ultraviolet spectrophotometry, and disposable electrochemical sensors have also been used for heavy metal detection in MPs. To elucidate the systematic and comprehensive information, these methods have also been briefly introduced in this review.

Quality control of the traditional herbs and herbal products: a review

Background

Herbal medicinal material and product need is increasing, and with this increase in the need, it is very much an essential requirement to maintain the quality of them.

Main body

The quality of the herbals is altered by various physical, chemical, and geographical aspects which contribute to the quality of these materials. Apart from that, adulteration is also an increasing concern when it comes to herbal material quality. Various chemical and phytochemical test, analytical techniques, and hyphenated analytical techniques are used for determining the quality aspects of the herbal materials in the herbal pharmaceuticals.

Conclusion

These techniques can be used as quality control tool in assessing the quality of herbal materials and herbal pharmaceuticals.

Evaluating the applicability of multi-energy calibration as an alternative method for quantitative molecular spectroscopy analysis

Multi-Energy Calibration (MEC) was recently proposed as an innovative analytical method to be used in efficient and accurate quantitative analysis based on atomic spectroscopy. Here, the applicability of the MEC method for quantifying molecular species using UV-Vis and fluorescence measurements was evaluated for the first time. UV-Vis and fluorescence spectra of the analytical solutions of methylene blue and eosin-methylene blue in two different solvents (distilled-deionized water and methanol) were collected. MEC showed high precision and sensitivity for determining the analyte concentration, providing similar limit of detection and quantification when compared with conventional analytical methods, such as external standard calibration and standard additions. Therefore, the present study has shown that MEC can be successfully applied for quantifying molecular species in a simple and efficient way accounting UV-Vis and fluorescence spectroscopy.