Highly-sensitive and reflective glucose sensor based on optical fiber surface plasmon resonance

An advanced optic-fiber differential sensing system enhanced by molecularly imprinted polymer for specific sodium benzoate detection

A molecularly imprinted polymer (MIP) based microfiber differential demodulation sensing system for sodium benzoate (SB) concentration detection is proposed. The specific binding of MIP on the surface of microfibers with SB can lead to changes in local refractive index (RI). RI change induces a drift in the interference wavelength, which can be monitored by the power difference between two fiber Bragg gratings (FBGs). The sensing system can detect SB in the concentration range of 0.1-50 μg/ml, and interference wavelength and FBG power difference sensitivities are 0.55 nm/(μg/ml) and 2.64 dB/(μg/ml) in the low concentration range of 0.1-1 μg/ml, respectively, with a limit of detection (LOD) of 0.1 μg/ml. This microfiber differential demodulation sensing system is not only simple to fabricate, but also simplifies the demodulation equipment to reduce the cost, which providing a simple, reliable and low-cost technique for the quantitative detection of SB concentration in beverages and flavoured foods.

Optical proximity sensors using multiple quantum well didoes

InGaN/GaN multiple quantum well (MQW) diodes perform multiple functions, such as optical emission, modulation and reception. In particular, the partially overlapping spectral region between the electroluminescence (EL) and responsivity spectra of each diode results in each diode being able to sense light from another diode of the same MQW structure. Here, we present a noncontact, optical proximity sensing system by integrating an MQW-based light transmitter and detector into a tiny GaN-on-sapphire chip. Changes in the external environment modulate the light emitted from the transmitter. Reflected light is received by the on-chip MQW detector, wherein the carried external modulation information is converted into electrical signals that can be extracted. The maximum detection proximity is approximately 17 mm, and the displacement detection accuracy is within 1 mm. Based on the detection of distance, we extend the application of the sensor to vibration and pressure detection. This monolithic integration design can replace external discrete light transmitter and detector systems to miniaturize reflective sensor architectures, enabling the development of novel optical sensors.

Enhanced Sensitivity in Optical Sensors through Self-Image Theory and Graphene Oxide Coating

This paper presents an approach to enhancing sensitivity in optical sensors by integrating self-image theory and graphene oxide coating. The sensor is specifically engineered to quantitatively assess glucose concentrations in aqueous solutions that simulate the spectrum of glucose levels typically encountered in human saliva. Prior to sensor fabrication, the theoretical self-image points were rigorously validated using Multiphysics COMSOL 6.0 software. Subsequently, the sensor was fabricated to a length corresponding to the second self-image point (29.12 mm) and coated with an 80 µm/mL graphene oxide film using the Layer-by-Layer technique. The sensor characterization in refractive index demonstrated a wavelength sensitivity of 200 ± 6 nm/RIU. Comparative evaluations of uncoated and graphene oxide-coated sensors applied to measure glucose in solutions ranging from 25 to 200 mg/dL showed an eightfold sensitivity improvement with one bilayer of Polyethyleneimine/graphene. The final graphene oxide-based sensor exhibited a sensitivity of 10.403 ± 0.004 pm/(mg/dL) and demonstrated stability with a low standard deviation of 0.46 pm/min and a maximum theoretical resolution of 1.90 mg/dL.

A Small Highly Sensitive Glucose Sensor Based on a Glucose Oxidase-Modified U-Shaped Microfiber

Diabetes patients need to monitor blood glucose all year round. In this article, a novel scheme is proposed for blood glucose detection. The proposed sensor is based on a U-shaped microfiber prepared using hydrogen-oxygen flame-heating technology, and then 3-aminopropyltriethoxysilane (APTES) and glucose oxidase (GOD) are successively coated on the surface of the U-shaped microfiber via a coating technique. The glucose reacts with the GOD of the sensor surface to produce gluconic acid, which changes the effective refractive index and then shifts the interference wavelength. The structure and morphology of the sensor were characterized via scanning electron microscope (SEM) and confocal laser microscopy (CLM). The experimental results show that the sensitivity of the sensor is as high as 5.73 nm/(mg/mL). Compared with the glucose sensor composed of the same material, the sensitivity of the sensor increased by 329%. The proposed sensor has a broad application prospect in blood glucose detection of diabetic patients due to the advantages of miniaturization, high sensitivity, and good stability.

Fabrication of a Novel Optical Glucose Biosensor Using Copper(II) Neocuproine as a Chromogenic Oxidant and Glucose Dehydrogenase-Immobilized Magnetite Nanoparticles

This study describes a novel optical glucose biosensor based on a colorimetric reaction between reduced nicotinamide adenine dinucleotide (NADH) and a copper(II) neocuproine complex ([Cu(Nc)2]2+) as a chromogenic oxidant. An enzymatic reaction takes place between glucose and glucose dehydrogenase (GDH)-chitosan (CS) immobilized on silanized magnetite nanoparticles (CS@SiO2@Fe3O4) in the presence of coenzyme NAD+. The oxidation of glucose to gluconolactone via the immobilized enzyme is coupled with the reduction of NAD+ to NADH at the same time. After the separation of GDH-immobilized SiO2@Fe3O4 with a magnet, the enzymatically produced NADH chemically reduces the chromogenic oxidant cupric neocuproine to the cuprous chelate. Thus, the glucose biosensor is fabricated based on the measurement of the absorbance of the formed yellow-orange complex ([Cu(Nc)2]+) at 450 nm. The obtained results show that the colorimetric biosensor has a wide linear response range for glucose, between 1.0 and 150.0 μM under optimized conditions. The limit of detection and limit of quantification were found to be 0.31 and 1.02 μM, respectively. The selectivity properties of the fabricated biosensor were tested with various interfering species. This biosensor was applied to various samples, and the obtained results suggest that the fabricated optical biosensor can be successfully used for the selective and sensitive determination of glucose in real samples.

Highly sensitive surface plasmon resonance sensor with surface modified MoSe2/ZnO composite film for non-enzymatic glucose detection

The rapid and accurate assessment of glucose concentration has been demonstrated to play a significant role in human health, such as the diagnosis and treatment of diabetes, pharmaceutical research and quality monitoring in the food industry, necessitating further development of the performance for glucose sensor especially at low concentrations. However, glucose oxidase-based sensors suffer from crucial restriction in bioactivity because of their poor environmental tolerance. Recently, catalytic nanomaterials with enzyme-mimicking activity, known as nanozymes, have gained considerable interest to overcome the drawback. In this scenario, we report an inspiring surface plasmon resonance (SPR) sensor for non-enzymatic glucose detection employing ZnO nanoparticles and MoSe2 nanosheets composite (MoSe2/ZnO) as sensing film, featuring desirable advantages of high sensitivity and selectivity, lab-free and low cost. The ZnO was used to specifically recognize and bind glucose, and further signal amplification was realized by incorporating of MoSe2 owing to its larger specific surface area and favorable bio-compatibility, as well as high electron mobility. These unique features of MoSe2/ZnO composite film result in an obvious improvement of sensitivity for glucose detection. Experimental results show that the measurement sensitivity of the proposed sensor could reach 72.17 nm/(mg/mL) and a detection limit of 4.16 μg/mL by appropriately optimizing the componential constitutions of MoSe2/ZnO composite. In addition, the favorable selectivity, repeatability and stability are demonstrated as well. This facile and cost-effective work provides a novel strategy for constructing high-performance SPR sensor for glucose detection and a prospective application in biomedicine and human health monitoring.

Graphene surface plasmon sensor for ultra-low-level SARS-CoV-2 detection

Precisely detecting the ultra-low-level severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) is crucial. The detection mechanism must be sensitive, low-cost, portable, fast, and easy to operate to tackle coronavirus disease 19 (COVID-19). This work proposes a sensor exploiting graphene surface plasmon resonance to detect SARS-CoV-2. The graphene layer functionalized with angiotensin-converting enzyme 2 (ACE2) antibodies will help efficient adsorption of the SARS-CoV-2. In addition to the graphene layer, ultra-thin layers of novel two-dimensional materials tungsten disulfide (WS2), potassium niobate (KNbO3), and black phosphorus (BP) or blue phosphorus (BlueP) used in the proposed sensor will increase the light absorption to detect an ultra-low SARS-CoV-2 concentration. The analysis presented in this work shows that the proposed sensor will detect SARS-CoV-2 as small as ∼1 fM. The proposed sensor also offers a minimum sensitivity of 201 degrees/RIU, a figure-of-merit of 140 RIU-1, and enhanced binding kinetics of the SARS-CoV-2 to the sensor surface.

Optical Glucose Sensors Based on Chitosan-Capped ZnS-Doped Mn Nanomaterials

The primary goal of glucose sensing at the point of care is to identify glucose concentrations within the diabetes range. However, lower glucose levels also pose a severe health risk. In this paper, we propose quick, simple, and reliable glucose sensors based on the absorption and photoluminescence spectra of chitosan-capped ZnS-doped Mn nanomaterials in the range of 0.125 to 0.636 mM glucose corresponding to 2.3 mg/dL to 11.4 mg/dL. The detection limit was 0.125 mM (or 2.3 mg/dL), much lower than the hypoglycemia level of 70 mg/dL (or 3.9 mM). Chitosan-capped ZnS-doped Mn nanomaterials retain their optical properties while improving sensor stability. This study reports for the first time how the sensors' efficacy was affected by chitosan content from 0.75 to 1.5 wt.%. The results showed that 1 %wt chitosan-capped ZnS-doped Mn is the most-sensitive, -selective, and -stable material. We also put the biosensor through its paces with glucose in phosphate-buffered saline. In the same range of 0.125 to 0.636 mM, the sensors-based chitosan-coated ZnS-doped Mn had a better sensitivity than the working water environment.

Cost-Effective Fiber Optic Solutions for Biosensing

In the last years, optical fiber sensors have proven to be a reliable and versatile biosensing tool. Optical fiber biosensors (OFBs) are analytical devices that use optical fibers as transducers, with the advantages of being easily coated and biofunctionalized, allowing the monitorization of all functionalization and detection in real-time, as well as being small in size and geometrically flexible, thus allowing device miniaturization and portability for point-of-care (POC) testing. Knowing the potential of such biosensing tools, this paper reviews the reported OFBs which are, at the moment, the most cost-effective. Different fiber configurations are highlighted, namely, end-face reflected, unclad, D- and U-shaped, tips, ball resonators, tapered, light-diffusing, and specialty fibers. Packaging techniques to enhance OFBs' application in the medical field, namely for implementing in subcutaneous, percutaneous, and endoscopic operations as well as in wearable structures, are presented and discussed. Interrogation approaches of OFBs using smartphones' hardware are a great way to obtain cost-effective sensing approaches. In this review paper, different architectures of such interrogation methods and their respective applications are presented. Finally, the application of OFBs in monitoring three crucial fields of human life and wellbeing are reported: detection of cancer biomarkers, detection of cardiovascular biomarkers, and environmental monitoring.

SPR-Based Sensor for the Early Detection or Monitoring of Kidney Problems

SPR-based technology has emerged as one of the most versatile optical tools for analyzing the binding mechanism of molecular interaction due to its inherent advantages in sensing applications, such as real-time, label-free, and high sensitivity characteristics. SPR is widely used in various fields, including healthcare, environmental management, and food-borne illness analysis. Meanwhile, kidney disease has grown to be one of the world's most serious public health problems in recent decades, resulting in physical degeneration and even death. As a result, several studies have published their findings regarding developing of reliable sensor technology based on the SPR phenomenon. However, an integrated and comprehensive discussion regarding the application of SPR-based sensors for detecting of kidney disease has not yet been found. Therefore, this review will discuss the recent advancements in the development of SPR-based sensors for monitoring kidney-related diseases. Numerous SPR configurations will be discussed, including Kretschmann, Otto, optical fiber-based SPR, and LSPR, which are all used to detect analytes associated with kidney disease, including urea, creatinine, glucose, uric acid, and dopamine. This review aims to show the broad application of SPR sensors which encouraged the development of SPR sensors for kidney problems monitoring.

A plug-and-play optical fiber SPR sensor for simultaneous measurement of glucose and cholesterol concentrations

A plug-and-play surface plasmon resonance (SPR) dual-parameter optical fiber biosensor is reported, in which Au film was firstly coated on the fiber surface for exciting SPR and the end half of the Au film was modified with Au nanoparticles to generate double SPR resonance valleys. For simultaneous detecting of glucose and cholesterol concentrations, modified P-mercaptophenylboronic acid (PMBA) and β-cyclodextrin (β-CD) were subsequently coated on the surface of sensor probe. Due to the cis-diol structure of glucose, it can interact with PMBA, leading to a red shift of one SPR resonant valley, whose maximum wavelength shift is 11.228 nm in the range of 0-1.7 mM glucose concentration. On the same time, the cholesterol molecules can realize the host-guest combination with β-CD, leading to a red shift of another SPR resonant valley, and the maximum wavelength shift is 18.893 nm in the cholesterol concentration range of 0-300 nM. The detection limits of the sensor to glucose and cholesterol are 0.00078 mM and 0.012 nM, respectively. The enhances the practical value of the dual-parameter sensor. Both theory and experiment results verify the feasibility of the "plug-and-play" sensor to measure the dual biomass of glucose and cholesterol with ultra-low detection limit and good selectivity. The proposed method provides a huge research value for the optical fiber sensor in multi-parameter measurement.

Dual-fiber optic bioprobe system for triglyceride detection using surface plasmon resonance sensing and lipase-immobilized magnetic bead hydrolysis

The rapid and accurate detection of triglyceride (TG) plays a valuable role in the prevention and control of dyslipidemia. In this paper, a novel method for TG detection using a dual-fiber optic bioprobe system, which can accurately detect different levels of TG concentration in serum, is proposed. The system employs disposable microprobe-type fiber optic surface plasmon resonance (SPR) biosensors for signal acquisition, providing high stability and portability while avoiding cross-contamination caused by repeated use. The proposed biosensor with a high sensitivity of 1.25 nm/(mg/mL) for TG detection in serum and a tiny diameter of 125 μm, was fabricated using a novel multimode fiber-single-mode fiber-reflector (MSR) structure, which has been scarcely ever reported to the best of our knowledge. In the process of TG detection, lipase-immobilized magnetic beads were introduced to specifically hydrolyze TG, and the relationship between the TG content and the SPR differential signal was obtained from dual-fiber optic bioprobe measurements of the TG sample before and after hydrolysis. The proposed method achieved TG detection in the concentration range of 0-8 mg/mL (including healthy and unhealthy levels of TG concentration in the human body). Additionally, the miniaturized fiber optic biosensors used in this work have the advantages of low sample consumption, high sensitivity, simple operation, label-free measurement, high selectivity, and low cost. This method provides a new pathway for rapid and reliable TG detection and has potential applications in medical research and clinical diagnosis.

A Highly Sensitive Electrochemical Glucose Sensor Based on Room Temperature Exfoliated Graphite-Derived Film Decorated with Dendritic Copper

An ultrasensitive enzyme-free glucose sensor was facilely prepared by electrodepositing three-dimensional dendritic Cu on a room temperature exfoliated graphite-derived film (RTEG-F). An excellent electrocatalytic performance was demonstrated for glucose by using Cu/RTEG-F as an electrode. In terms of the high conductivity of RTEG-F and the good catalytic activity of the dendritic Cu structures, the sensor demonstrates high sensitivities of 23.237 mA/mM/cm², R² = 0.990, and 10.098 mA/mM/cm², R² = 0.999, corresponding to the concentration of glucose ranging from 0.025 mM to 1.0 mM and 1.0 mM to 2.7 mM, respectively, and the detection limit is 0.68 μM. In addition, the Cu/RTEG-F electrode demonstrates excellent anti-interference to interfering species and a high stability. Our work provides a new idea for the preparation of high-performance electrochemical enzyme-free glucose sensor.

In Situ Temperature-Compensated DNA Hybridization Detection Using a Dual-Channel Optical Fiber Sensor

A multifunction, high-sensitivity, and temperature-compensated optical fiber DNA hybridization sensor combining surface plasmon resonance (SPR) and Mach-Zehnder interference (MZI) has been designed and implemented. We demonstrate, for the first time to our knowledge, the dual-parameter measurement of temperature and refractive index (RI) by simultaneously using SPR and MZI in a simple single-mode fiber (SMF)-no-core fiber (NCF)-SMF structure. The experimental results show RI sensitivities of 930 and 1899 nm/RIU and temperature sensitivities of 0.4 and -1.4 nm/°C for the MZI and SPR, respectively. We demonstrate a sensitivity matrix used to simultaneously detect both parameters, solving the problem of temperature interference of RI variation-based biosensors. In addition, the sensor can also distinguish biological binding events by detecting the localized RI changes at the fiber's surface. We realize label-free sensing of DNA hybridization detection by immobilizing probe DNA (pDNA) onto the fiber as the probe to capture complementary DNA (cDNA). The experimental results show that the sensor can qualitatively detect cDNA after temperature compensation, and the limit of detection (LOD) of the sensor reaches 80 nM. The proposed sensor has advantages of high sensitivity, real time, low cost, temperature compensation, and low detection limit and is suitable for in situ monitoring, high-precision sensing of DNA molecules, and other related fields, such as gene diagnosis, kinship judgment, environmental monitoring, and so on.

Detection of blood glucose with hemoglobin content using compact photonic crystal fiber

We have proposed Twin Elliptical Core Photonic Crystal Fiber (TEC-PCF) sensor for the detection of blood glucose level under the influence of hemoglobin components. The main featuring of the proposed biosensor is to detect the wide range of blood glucose content with enhanced sensitivity, by utilizing small length of the fiber. In order to achieve this, we have constructed asymmetric TEC-PCF where the elliptical core is filled by blood sample. The numerical sensing characteristics are evaluated using Finite Element Method (FEM). By varying hemoglobin concentrations as 120 g/L, 140 g/L and 160 g/L, we realize enhanced blood glucose sensing with detection range from 0 g/L to 100 g/L. The sensing performance of the proposed biosensor is studied through the coupling length and transmission power spectrum by calculation of effective index of the coupling mode. The obtained maximum wavelength sensitivity under the influence of 160 g/L hemoglobin content is 2.4 nm/(g/L) and 2.42 nm/(g/L) with fiber length of 0.245 mm and 0.215 mm for X and Y polarization, respectively. Further, limit of detection (LOD) is calculated under the influence of 160 g/L hemoglobin content is 0.375 mg/L and 0.372 mg/L for X and Y polarization, respectively. The proposed miniaturized sensing device can be integrated with microfluidic systems for the development of next-generation biosensor applications as point of-care and lab-on-a-chip.