Dimethyl sulfoxide infiltrated photonic crystals for gas sensing

Advanced polymer grating fabrications: Surface-engineered structural colors for organic vapor sensing

The emerging field of structural coloration, using the intricate interactions between light and engineered micro/nanostructures, is increasingly recognized for its transformative potential in advanced sensing technologies, anti-counterfeiting measures, and intelligent displays. Especially the structural color generated by precise micro and nanostructures has a high sensitivity to external environmental changes and has great advantages for application in sensing. This study uses time-domain finite element modeling in tandem with comprehensive chromaticity analysis to investigates the progression of color transitions in polymer-based grating structures, with an emphasis on enhancing sensitivity to subtle chromatic variations. A polystyrene (PS) grating structure was fabricated by injection molding process to investigate the performance of organic vapor detection by grating structure on the experimental platform of gas detection. The investigative findings reveal that the grating depth significantly dictates the colorimetric response, overshadowing the influence of the duty cycle and spatial period. In acetone vapor atmosphere, the PS grating structure can achieve accurate color response as little as 1 min, and when the acetone structural color is fully reactive, the sensitivity can reach a maximum of Sg = 7.2 × 10-4 ppm-1, that demonstrated superior performance in detecting high concentrations of acetone vapor showcasing pronounced stability and consistent repeatability. These characteristics suggest its strong potential for deployment in reliable and robust sensing modalities.

Responsive photonic hydrogel for colorimetric detection of formaldehyde

Formaldehyde (FA) can damage DNA, cause liver and kidney dysfunction, and ultimately lead to malignant tumors. Therefore, it is essential to develop a method that can conveniently detect FA with high detection sensitivity. Here, a responsive photonic hydrogel was prepared by embedding three-dimensional photonic crystal (PC) into amino-functionalized hydrogel to construct a colorimetric sensing film for FA. The amino groups on the polymer chains of the photonic hydrogel reacts with FA to increase the crosslinking density of the hydrogel, resulting in its volume shrinkage and a decrease in microsphere spacing of the PC. That causes the reflectance spectra blue-shift of more than 160 nm and color change from red to cyan for the optimized photonic hydrogel, achieving the sensitive, selective and colorimetric detection of FA. The constructed photonic hydrogel shows good accuracy and reliability for practical determination of FA in air and aquatic products, providing a new strategy for designing other target analytes responsive photonic hydrogels.

Effect of Solvents on the Color Recovery Responses of Swollen Structural-Color Epoxy Films Based on Inverse Opal Photonic Crystals

Photonic crystal (PC) films have been widely applied in color displays and the anticounterfeiting field due to their facile fabrication process and easily tunable properties. However, the method for improving the reusability of the color-changed swollen PC films is still a challenge. In this paper, we report the color recovery behavior of epoxy resin inverse opal photonic crystal (EP-IOPC) films, which show different responses after being infiltrated with ethanol, acetone, and dimethyl sulfoxide (DMSO) based on the swelling and deswelling process. DMSO achieved the best effect on the color recovery of the swollen EP-IOPC films compared to ethanol and acetone, and the reflection spectrum blue-shifted in a small range and finally stabilized at a 60 nm deviation from the original spectrum after 10 times recovery. This strategy of color recovery not only solved the problem that the swollen EP-IOPC film's color changes to a certain extent but also showed promising potential in the color display and anticounterfeiting field.

Flory-Huggins VOC Photonics Sensor Made of Cellulose Derivatives

As a widespread air pollutant, volatile organic compounds (VOCs) are harmful to the human body's skin, nervous system, and respiratory system. Low-cost, extensive, and continuous detection of VOCs is of great significance to human health. We infiltrated and coated cellulose acetate on the inverse opal photonic crystal skeleton of methylcellulose-polyvinyl alcohol-graphene oxide to construct a degradable, high-toughness cellulose VOC sensor. Cellulose acetate enhances the response to VOCs and achieves a highly selective response to acetone vapor due to the smaller Flory-Huggins parameter with acetone. This work proposes a general, simple, easy-to-use, and highly selective photonic crystal VOC sensor development strategy. Calculated from the Flory-Huggins solution theory, a suitable polymer was selected to modify the inverse opal photonic crystal framework and achieve high selectivity detection.

Selectivity in trace gas sensing: recent developments, challenges, and future perspectives

Selectivity is one of the most crucial figures of merit in trace gas sensing, and thus a comprehensive assessment is necessary to have a clear picture of sensitivity, selectivity, and their interrelations in terms of quantitative and qualitative views.

Silver Enhances Hematite Nanoparticles Based Ethanol Sensor Response and Selectivity at Room Temperature

Gas sensors are fundamental for continuous online monitoring of volatile organic compounds. Gas sensors based on semiconductor materials have demonstrated to be highly competitive, but are generally made of expensive materials and operate at high temperatures, which are drawbacks of these technologies. Herein is described a novel ethanol sensor for room temperature (25 °C) measurements based on hematite (α‑Fe₂O₃)/silver nanoparticles. The AgNPs were shown to increase the oxide semiconductor charge carrier density, but especially to enhance the ethanol adsorption rate boosting the selectivity and sensitivity, thus allowing quantification of ethanol vapor in 2–35 mg L⁻¹ range with an excellent linear relationship. In addition, the α-Fe₂O₃/Ag 3.0 wt% nanocomposite is cheap, and easy to make and process, imparting high perspectives for real applications in breath analyzers and/or sensors in food and beverage industries. This work contributes to the advance of gas sensing at ambient temperature as a competitive alternative for quantification of conventional volatile organic compounds.