Highly sensitive colorimetric paper-based analytical device for the determination of tetracycline using green fluorescent carbon nitride nanoparticles

Room temperature, ultrafast and one-step synthesis of highly fluorescent sulfur quantum dots probe and their logic gate operation

The direct and rapid conversion of abundant and cheap elemental sulfur into fluorescent sulfur quantum dots (SQDs) at room temperature is a critical and urgent challenge. Conventional synthesis methods require high temperatures, high pressures, or specific atmospheric conditions, making them complex and impractical for real applications. Herein, we propose a simple method for synthesizing SQDs simply by adding H2O2 to an elemental sulfur-ethylenediamine (S-EDA) solution at room temperature. Remarkably, within a mere 10 min, SQDs with a photoluminescence quantum yield of 23.6 % can be obtained without the need for additional steps. A comprehensive analysis of the mechanism has demonstrated that H2O2 is capable of converting Sx2- ions generated in the S-EDA solution into zero-valent sulfur atoms through oxidation. The obtained SQDs can be utilized as a fluorescent probe for detection of tetracycline (TC) and Ca2+ ions with the limit of detection (LOD) of 0.137 μM and 0.386 μM respectively. Moreover, we have developed a sensitive logic gate sensor based on SQDs, harnessing the activated cascade effect to create an intelligent probe for monitoring trace levels of TC and Ca2+ ions. This paper not only presents a viable approach for ultrafast and scalable synthesis of SQDs at room temperature, but also contributes to the efficient utilization of elemental sulfur resources.

A miniaturized biosensor for rapid detection of tetracycline based on a graphene field-effect transistor with an aptamer modified gate

Tetracycline is a broad-spectrum antibiotic for human, poultry and livestock that may cause health damage when enriched in humans. Therefore, it is essential to create a rapid tetracycline assay with high sensitivity, specificity and portability. In this study, a miniaturized tetracycline biosensor based on aptamer-modified graphene field-effect transistor (Apt-SGGT) was fabricated and two detection strategies using transfer characteristic curves and real-time channel current were established for different circumstances. The detection limits of the two strategies were 2.073 pM and 100 pM, respectively. The biosensor also demonstrated outstanding stability, anti-interference and specificity ability. Finally, the biosensor was employed to detect the content of tetracycline in Skim Milk with outstanding recovery rate. We believe that the miniaturized Apt-SGGT biosensor with appropriate detection strategies will provide an ideal portable sensing platform for many important analytes in food with superior selectivity and sensitivity.

Straightforward smartphone assay for quantifying tannic acid in beverages based on colour change of Eu3+/polyethyleneimine complex

Tannic acid (TA)-a natural product-is a polyphenol derivative that occurs in certain kinds of beverages. A large amount of TA could give rise to an unpleasant flavour and could negatively affect the human body by causing stomach irritation, abdominal pain, nausea, vomiting, and even death. Thus, the need exists for a simple TA detection procedure that meets specific criteria such as on-site analysis, portability, and affordability. Herein, we present a new TA assay, which is based on the fluorescent quenching effect of an efficient fluorophore, and which comprises a smartphone-integrated homemade reader system. The fluorescent polyethyleneimine-derivatised polymer (FP), a strong emitter at 510 nm, was synthesised with the aid of a facile sonication method. In the presence of Eu³⁺ ions, TA quenches the fluorescence of the FP via electrostatic interaction. A smartphone was used to capture an image of the FP undergoing fluorescence for conversion to RGB values. The blue channel was chosen for further analysis because it offered the highest R²-value compared to the red and green channels. We verified these results using a commercial spectrofluorometer and calculated the limit of detection of this assay as 87 nM and 20 nM for the homemade reader and spectrofluorometer, respectively. The detection range for TA with the proposed assay is 0.16-66.66 μM. The application of the proposed method to real beverage samples for TA detection demonstrates its analytical applicability.

Paper-based optical sensors paired with smartphones for biomedical analysis

The traditional analytical methods used for biomedical analysis are expensive and not easy to handle and require sophisticated instruments, thus their application is limited in resource-limited settings. Due to their portability, low cost, and ability to be applied to different analytical techniques, paper-based analytical devices are becoming valuable tools for biomedical analysis. The integration of smartphones into analytical devices has provided the ability to build portable, cost-effective, straightforward analytical devices for biomedical analysis and mobile health. The key aim of this review is to emphasize the recent applications of PADs combined with a smartphone for the optical analysis of biomedical species. We started this review by highlighting the type of papers and their modifications with different materials to prepare the PADs. After that, this review presents various detection methods including colorimetry, fluorescence, and luminescence where the smartphone is used for read-out. In the end, we provided the recent applications of the analysis of different biomedical compounds such as cancer and cardiovascular biomarkers, metal ions, glucose, viruses, etc. We believe that the present review will attract a wide scientific community in the areas of analytical chemistry, sensors, and clinical testing.

Paper-Based Molecular-Imprinting Technology and Its Application

Paper-based analytical devices (PADs) are highly effective tools due to their low cost, portability, low reagent accumulation, and ease of use. Molecularly imprinted polymers (MIP) are also extensively used as biomimetic receptors and specific adsorption materials for capturing target analytes in various complex matrices due to their excellent recognition ability and structural stability. The integration of MIP and PADs (MIP-PADs) realizes the rapid, convenient, and low-cost application of molecular-imprinting analysis technology. This review introduces the characteristics of MIP-PAD technology and discusses its application in the fields of on-site environmental analysis, food-safety monitoring, point-of-care detection, biomarker detection, and exposure assessment. The problems and future development of MIP-PAD technology in practical application are also prospected.

Eu doped Ti3C2 quantum dots to form a ratiometric fluorescence platform for visual and quantitative point-of-care testing of tetracycline derivatives

Antibiotic residues have become a public health issues, the fast detection of tetracycline (Tc) in the environment is urgently required. In this work, Ti₃C₂ quantum dots (Ti₃C₂ QDs) and Europium ions jointly constructed a ratiometric fluorescence (FL) platform for the detection of Tc, based on synergistic impact of the Foster Resonance Energy Transfer (FRET) from Ti₃C₂ QDs to Eu³⁺ ions and the Antenna Effect (AE) between Tc and Eu³⁺ ions. And we proposed a ratiometric FL platform for detecting Tc with good linear response range (100-1000 uM) and low detection limit (48.79 nM). Meanwhile, we applied this platform to detect a serious of β-diketone ligands of Eu³⁺ ions, demonstrating the platform's versatility for this category of chemical. Furthermore, based on the color changes of QDs@Eu³⁺ from blue to red at 365 nm ultraviolet light, an intelligent detection smart device was built for the visual semi-quantitative detection of Tc in actual samples. We proved the applicability of the device in complicated samples and the potential for rapid, sensitive, intuitive and point-of-care detection in the field of environment, food, pharmaceutical and agriculture.

Enhancement of the Detection Performance of Paper-Based Analytical Devices by Nanomaterials

Paper-based analytical devices (PADs), including lateral flow assays (LFAs), dipstick assays and microfluidic PADs (μPADs), have a great impact on the healthcare realm and environmental monitoring. This is especially evident in developing countries because PADs-based point-of-care testing (POCT) enables to rapidly determine various (bio)chemical analytes in a miniaturized, cost-effective and user-friendly manner. Low sensitivity and poor specificity are the main bottlenecks associated with PADs, which limit the entry of PADs into the real-life applications. The application of nanomaterials in PADs is showing great improvement in their detection performance in terms of sensitivity, selectivity and accuracy since the nanomaterials have unique physicochemical properties. In this review, the research progress on the nanomaterial-based PADs is summarized by highlighting representative recent publications. We mainly focus on the detection principles, the sensing mechanisms of how they work and applications in disease diagnosis, environmental monitoring and food safety management. In addition, the limitations and challenges associated with the development of nanomaterial-based PADs are discussed, and further directions in this research field are proposed.

Correction pen as a hydrophobic/lipophobic barrier plotter integrated with paper-based chips and a mini UV-torch to implement all-in-one device for determination of carbazochrome

The design of a cheap, simple, and handy sensing system for rapid quantitation of pharmaceuticals becomes mandatory to ease drug development procedures, quality control, health care, etc. This work describes a simple, innovative, and easily manufactured paper-based device using a correction pen as a plotter for hydrophobic/lipophobic barriers and graphene quantum dots for recognition and quantification of the hemostatic drug carbazochrome, via fluorescence turn-off mechanism mediated by the inner filter effect. A smartphone-based all-in-one device fitted with an inexpensive 365 nm flashlight as a UV light source and a free image processing software was developed for rapid and reliable interpretation of the fluorescence change from the paper-based device upon introduction of the drug. The simple and convenient steps permit the analysis of many samples in a very short time. The smartphone-based all-in-one device featured excellent sensitivity for carbazochrome with a limit of detection equals to 12 ng/detection zone and good %recovery (100.0 ± 0.4). The reliability of the device was ascertained by favorable statistical comparison with the analogous optimized conventional fluorimetry method and a reference HPLC method. The device has been successfully applied for versatile quantitation of carbazochrome in tablets and on manufacturing equipment surfaces with excellent recoveries. The device offers many green aspects that definitely assist the implementation of the sustainability concept to analytical laboratories. The cost-efficiency, reliability, and ease of fabrication as well as the greenness and user friendship qualify the device for wide application in low-income communities.

Simple fluorescence optosensing probe for spermine based on ciprofloxacin-Tb3+ complexation

We developed a facile detection method of spermine based on the fluorescence (FL) quenching of the ciprofloxacin-Tb3+ complex, which shows astrong green emission. Ciprofloxacin (CP) makes efficient bondings to Tb3+ ion as a linker molecule through carboxylic and ketone groups to form a kind of lanthanide coordination polymer. The addition of spermine that competes with Tb3+ ions for the interaction with CP due to its positive charge brings about weakened coordination linkage of CP and Tb3+. The probe exhibited high sensitivity, selectivity, and good linearity in the range of 2-180 μM with a low limit of detection of 0.17 μM. Moreover, we applied this method on the paper strip test (PST), along with the integration of a smartphone and Arduino-based device. The practical reliability of the developed probe was evaluated on human serum samples with acceptable analytical results.

Paper-based analytical device for high-throughput monitoring tetracycline residue in milk

A low-cost and portable paper-based analytical device has been developed for high throughput and on-site monitoring TC residue in milk through visualized colorimetric reaction. The filtration and concentration effect induced by the porous nature of paper contribute to strengthen the color intensity, leading to quantitative and sensitive detection of tetracycline reaching 1 ppm detection limit, with the linear range of 1-100 ppm both in water and milk samples. The applicability was demonstrated by detection of TC in 18 different types of real milk samples with good recovery ranging from 88% to 113%. Furthermore, the dynamic degradation behavior of tetracycline was monitored through the device. To the best of our knowledge, this is the first report of colorimetric detection of tetracycline in milk using the paper-based device. This simple, fast, cost-effective (~$0.50 per device) and equipment-free paper-based platform provides a promising tool for future application in food and environmental safety.

Selective optosensing of iron(III) ions in HeLa cells using NaYF4:Yb3+/Tm3+ upconversion nanoparticles coated with polyepinephrine

Novel polyepinephrine-modified NaYF₄:Yb,Tm upconversion luminescent nanoparticles (UCNP@PEP) were prepared via the self-polymerization of epinephrine on the surfaces of the UCNPs for selective sensing of Fe³⁺ inside a cell and for intracellular imaging. The proposed UCNP@PEP probe is a strong blue light emitter (λ_max = 474 nm) upon exposure to an excitation wavelength of 980 nm. The probe was used for detecting Fe³⁺ owing to the complexation reaction between UCNP@PEP and Fe³⁺, resulting in reduced upconversion luminescence (UCL) intensity. The proposed probe has a detection limit of 0.2 μM and a good linear range of 1-10 μM for sensing Fe³⁺ ions. Moreover, the UCNP@PEP probe displays high cell viability (90%) and is feasible for intracellular imaging. The ability of the probe to sense Fe³⁺ in a human serum sample was tested and shows promising output for diagnostic purposes. The prepared UCNP@PEP probe was characterized by using UV-visible (UV-Vis) absorption spectrometry, fluorescence (FL) spectrometry, field emission scanning electron microscopy (FE-SEM), X-ray photoelectron spectroscopy (XPS), and Fourier transform infrared spectroscopy (FT-IR).

Instrument-free and visual detection of organophosphorus pesticide using a smartphone by coupling aggregation-induced emission nanoparticle and two-dimension MnO2 nanoflake

Given the importance of food safety, it is highly desirable to develop a convenient, low-cost, and practical sensor for organophosphorus pesticides (OPs) detection. Here, a fluorescent paper analytical device (FPAD) based on aggregation-induced emission (AIE) nanoparticles (PTDNPs-0.10) and two-dimension MnO₂ nanoflakes (2D-MnNFs) was developed for instrument-free and naked-eye analysis of OPs. PTDNP-MnNFs composites were obtained through 2D-MnNFs and PTDNPs-0.10 by electrostatic interaction and the fluorescence emission of PTDNPs-0.10 was quenched through fluorescence resonance energy transfer (FRET). When acetylcholinesterase (AChE) was present, acetylthiocholine (ATCh) was catalytically hydrolyzed into thiocholine, which reduced MnO₂ of PTDNP-MnNFs into Mn²⁺, subsequently blocking the FRET and enhancing the fluorescence. Upon the addition of OP, AChE activity was depressed and thus the FRET between 2D-MnNFs and PTDNPs-0.10 was not affected, resulting in a slight change in fluorescence. On the basis of the variation in fluorescence intensity, highly sensitive detection of OP was readily achieved with a detection limit of 0.027 ng/mL; on the basis of the variation in brightness of FPAD, instrument-free and visual detection of OP was realized using a smartphone with a detection limit of 0.73 ng/mL. The application of FPAD has significantly simplified the detection procedure and decreased the test cost, supplying a new approach for on-site detection of OPs.