Low cost paper electrodes and the role of oxygen functionalities and edge-plane sites towards trolox sensing

Facile synthesis of tantalum decorated on iron selenide with nitrogen-doped graphene hybrid for the sensitive detection of trolox in berries: Density functional theory interpretation

This work presents a hydrothermal method followed by a sonochemical treatment for synthesizing tantalum decorated on iron selenide (Ta/FeSe2) integrated with nitrogen-doped graphene (NGR) as a susceptible electrode material for detecting trolox (TRX) in berries samples. The surface morphology, structural characterizations, and electrochemical performances of the synthesized Ta/FeSe2/NGR composite were analyzed via spectrophotometric and voltammetry techniques. The GCE modified with Ta/FeSe2/NGR demonstrated an impressive linear range of 0.1 to 580.3 μM for TRX detection. Additionally, it achieved a remarkable limit of detection (LOD) of 0.059 μM, and it shows a high sensitivity of 2.266 μA μМ-1 cm-2. Here, we used density functional theory (DFT) to investigate the structures of TRX and TRX quinone and the locations of energy levels and electron transfer sites. The developed sensor exhibits significant selectivity, satisfactory cyclic and storage stability, and notable reproducibility. Moreover, the practicality of TRX was assessed in different types of berries, yielding satisfactory recoveries.

Development and Evaluation of a Noninvasive Microfluidic-Based Paper Analytical Device for Leptospirosis Diagnosis

Leptospirosis is a re-emerging infectious disease that presents a diagnostic enigma for clinicians with frequent misdiagnosis due to lack of rapid and accurate diagnostic tests, as the current methods are encumbered by inherent limitations. The development of a diagnostic sensor with a sample-in-result-out capability is pivotal for prompt diagnosis. Herein, we developed a microfluidic paper-based analytical device (spin-μPAD) featuring a sample-in-result-out fashion for the detection of Leptospira specific urinary biomarker, sph2 sphingomyelinase, crucial for noninvasive point-of-care testing. Fabrication of paper devices involved precise photolithography techniques, ensuring a high degree of reproducibility and replicability. By optimizing the device's configuration and protein components, a remarkable sensitivity and specificity was achieved for detecting leptospiral sph2 in urine, even at low concentrations down to 1.5 fg/mL, with an assay time of 15 min. Further, the spin-μPAD was validated with 20 clinical samples, suspected of leptospirosis including other febrile illnesses, and compared with gold standard microscopic agglutination test, culture, Lepto IgM ELISA, darkfield microscopy, and Leptocheck WB spot test. In contrast to commercial diagnostic tools, the spin-μPAD was noninvasive, rapid, easy to use, specific, sensitive, and cost-effective. The results highlight the potential of this innovative spin-μPAD for an efficient and dependable approach to noninvasive leptospirosis diagnosis, addressing critical needs in the realms of public health and clinical settings.

Disposable paper electrodes for detection of changes in dopamine concentrations in rat brain homogenates

Dopamine, the main catecholamine neurotransmitter plays an important role in renal, cardiovascular, central nervous systems, and pathophysiological processes. The abnormal dopamine levels can result in neurological disorders such as Parkinson's, Alzheimer's, schizophrenia, acute anxiety, neuroblastoma and also contribute to cognitive dysfunctions. Given the widespread importance of dopamine concentration levels, it is imperative to develop sensors that are able to monitor dopamine. Herein, we have developed pre-anodized disposable paper electrode modified with 1-pyrenebutyric acid, for the selective and sensitive determination of dopamine. The sensor was characterized with Fourier transform infrared spectroscopy, Energy dispersive X-ray spectroscopy, X-ray photoelectron spectroscopy, and electrochemical techniques for addressing the robust formation and electrochemical activity. The modified electrode exhibited excellent electrocatalytic activity towards dopamine without the common interference from ascorbic acid. The calibration plot for the dopamine sensor resulted linear range from 0.003 μM to 0.5 μM with a detection limit of 0.11 nM. The sensor's potential utility was tested by monitoring dopamine concentration changes in rat brain homogenates when subjected to neurotoxicity. The developed sensor was validated with gold-standard UV-Vis spectroscopy studies and computational studies were performed to understand the interaction between 1-pyrenebutyric acid and dopamine.

Polytyrosine-Coated Paper Electrode for Sensitive and Selective Sensing of NADH

Reduced nicotinamide adenine dinucleotide (NADH)-detecting electrochemical sensors are attractive in monitoring and diagnosing various physiological disorders of NADH abnormalities. The NADH detection methods using conventional electrodes are challenging due to slow electron transfer and fouling effect. Interestingly, paper-based flexible and disposable electrodes (PE) are superior for sensing biomolecules through simple detection procedures with excellent sensitivity and selectivity. Herein, to construct a conducting polypeptide-modified paper electrode, initially, polytyrosine (PTyr) is synthesized from l-tyrosine N-carboxy anhydride through ring-opening polymerization, and PTyr is drop-coated on the PE. The PTyr-modified paper electrode (PMPE) demonstrated excellent electrochemical properties and facilitated the electrooxidation of NADH at a lower potential of 576 mV. The PMPE displayed a linear detection between 25 and 145 μM of NADH concentration, with a lower detection limit of 0.340 μM. Under ideal circumstances, the sensor developed displayed an excellent NADH detection capability without interference with the most common electroactive species, ascorbic acid. The PMPE facilitates good electrocatalytic activity toward NADH, which can also be employed as a substrate material for biofuel cells.

Paper-based electrodes as a tool for detecting ligninolytic enzymatic activities

Lignin is the most important natural source of aromatic compounds. The valorisation of lignin into aromatics requires fractionation steps that can be catalysed by ligninolytic enzymes. However, one of the main limitations of biological lignin fractionation is the low efficiency of biocatalysts; it is therefore crucial to enhance or to identify new ligninolytic enzymes. Currently, the screening of ligninolytic activities on lignin polymers represents a technological bottenleck and hinders the characterization and the discovery of efficient ligninolytic biocatalysts. An efficient and fast method for the measurement of such enzymatic activities is therefore required. In this work, we present a new electrochemical tool based on lignin-coated paper electrodes for the detection and the characterization of ligninolytic activity. The suitability of this method is demonstrated using a catalase-peroxidase isolated from Thermobacillus xylanilyticus.

Foldable RF Energy Harvesting System Based on Vertically Layered Metal Electrodes within a Single Sheet of Paper

Radio frequency energy harvesting (RFEH) systems have emerged as a critical component for powering devices and replacing traditional batteries, with paper being one of the most promising substrates for use in flexible RFEH systems. However, previous paper-based electronics with optimized porosity, surface roughness, and hygroscopicity still face limitations in terms of the development of integrated foldable RFEH systems within a single sheet of paper. In the present study, a novel wax-printing control and water-based solution process are used to realize an integrated foldable RFEH system within a single sheet of paper. The proposed paper-based device includes vertically layered foldable metal electrodes, a via-hole, and stable conductive patterns with a sheet resistance of less than 1 Ω sq^-1 . The proposed RFEH system exhibits an RF/DC conversion efficiency of 60% and an operating voltage of 2.1 V in 100 s at a distance of 50 mm and a transmitted power of 50 mW. The integrated RFEH system also demonstrates stable foldability, with RFEH performance maintained up to a folding angle of 150°. The single-sheet paper-based RFEH system thus has the potential for use in practical applications associated with the remote powering of wearable and Internet-of-Things devices and in paper electronics.

Plant-Based Structures as an Opportunity to Engineer Optical Functions in Next-Generation Light Management

This review addresses the reconstruction of structural plant components (cellulose, lignin, and hemicelluloses) into materials displaying advanced optical properties. The strategies to isolate the main building blocks are discussed, and the effects of fibrillation, fibril alignment, densification, self-assembly, surface-patterning, and compositing are presented considering their role in engineering optical performance. Then, key elements that enable lignocellulosic to be translated into materials that present optical functionality, such as transparency, haze, reflectance, UV-blocking, luminescence, and structural colors, are described. Mapping the optical landscape that is accessible from lignocellulosics is shown as an essential step toward their utilization in smart devices. Advanced materials built from sustainable resources, including those obtained from industrial or agricultural side streams, demonstrate enormous promise in optoelectronics due to their potentially lower cost, while meeting or even exceeding current demands in performance. The requirements are summarized for the production and application of plant-based optically functional materials in different smart material applications and the review is concluded with a perspective about this active field of knowledge.

Paper-based field-effect transistor sensors

The present scenario in the world largely demands affordable, fast, recyclable, and flexible electronic devices for bio sensing. Varieties of paper-based devices such as microfluidics paper electrodes, paper diodes, and paper-based transistors etc. have been developed and validated. Most of the fabrication techniques published so far have focused on economic, environment-friendly straightforward methods to develop paper-based field-effect transistors (PFET) sensors, additionally, explored their applications. The synthetic-free, mechanically flexible, biocompatible, and signal amplification capability render PFET based sensors for wearable device makers. Modified organic/inorganic PFETs identify target analytes based on the electrical signal and endow them as perfect transducers. In the field of PFET bio sensing technology, numerous challenges are needed to be discussed to proceed forward in biomedical and other analytical applications. Realizing biologically or chemically modified PFET having an exceptional signal to noise ratio, specificity, with rapid detection ability is challenging. This review recapitulates the fabrication techniques, performances of various PFET sensors, and summarizes the report by concluding remarks including the limitations of the existing PFET based sensors and the future holds in regards to the sustainable nature of PFET.