Hybrid monolith assisted magnetic ion-imprinted polymer extraction coupled with ICP-MS for determination of trace Au(III) in environmental and mineral samples

Bifunctional magnetic nanoparticles with ion imprinting for improving the flow through determination of ultratraces of Cd(II) using magnetic preconcentration

A novel bifunctional magnetic sorbent with mercapto and amino groups and ion imprinting (MBII) was synthesized using a one-step aqueous sol-gel process for preconcentration and determination of Cd(II) ions. MBII was employed as a microcolumn (MC) filler in a flow-through system coupled to GFAAS. The magnetic properties of the solid allowed microcolumn magnetic solid-phase extraction (MCMSPE) to be performed by simply including a single circular magnet around the MC. This assembly enabled complete attachment of the solid to the MC wall leaving a central void to facilitate higher sample flow rates without blockage or material loss. For comparison, a bifunctional magnetic solid without imprinting (MBNI) was also synthesized and evaluated. Both MBII and MBNI were characterized by FTIR, SEM, EDX, BET and magnetization measurements. The results showed the preservation of the magnetic core, its superparamagnetism and the functional groups in the solid. Batch studies revealed a maximum adsorption capacity for both materials at pH around 6 with equilibrium reached within 5 minutes. The advantages were reflected in the maximum adsorption capacity of MBII, which was found to be 2.5 times greater than that of MBNI. Both adsorbents were compared as MC fillers for dynamic preconcentration in MCMSPE systems. Under optimized conditions, MBNI showed a PCF of 125 and MBII of 250. The higher selectivity of MBII was corroborated by interfering ion studies. The analytical performance parameters for the proposed method using MBII as an adsorbent showed a detection limit of 0.05 ng L-1, a linear range of 2.0-80 ng L-1, an RSD% of 2.2 (n = 7; 20 ng L-1) and a lifetime of more than 300 preconcentration-elution cycles without loss of sensitivity or need for refilling. The method was successfully applied to the determination of trace Cd(II) in osmosis, lake and tap water with recoveries ranging from 98 to 105%. Comparison of these results with those of similar reported methods showed a considerable improvement primarily attributed to the combined effect of MBII's higher retention capacity and its magnetic properties that allowed higher sample flow rates and, thus, enhanced figures of merit.

[Magnetic ion imprinting techniques for the separation and analysis of elemental speciation]

Metal and metalloid elements have various possible isotopic compositions and oxidation states and often form coordination or covalent compounds with inorganic and organic small molecules or biological macromolecules, resulting in complex elemental speciation. Different species of the same element often have different properties, which dictate their behavior. Thus, elemental speciation analysis is vital for comprehensively and accurately assessing an element's environmental and biological effects and the corresponding risks. Because elemental speciation determines the behavior of an element in different environmental and biological processes, the analysis of elemental species has, in recent years, been important in various subjects, including analytical chemistry, environmental chemistry, geochemistry, ecology, agronomy, and biomedicine. The complexity of environmental and biological sample matrices, as well as the multiformity, low levels, and lability of chemical forms pose severe challenges in elemental speciation analysis. Therefore, the highly selective identification and efficient separation of native species is necessary for conducting the identification, quantification, ecotoxicity evaluation, and physiological function study of elemental speciation. Sample pretreatment by solid-phase extraction is an effective solution to the aforementioned problems, but the existing methods do not meet the requirements of current research. The transition of the target species from pre-processing to the detection device includes both on- and off-line arrangements. Compared with the on-line approach, the off-line approach requires more manual participation, increasing the analysis workload. However, the off-line approach can improve the analysis efficiency through high-throughput pretreatment when large batches of samples are encountered, meaning the off-line approach is still an effective model. Ion imprinting technology has been developed based on existing molecular imprinting technology, with four main steps present in the synthesis of ion imprinted polymers. First, ion imprinting technology uses metal ions as templates. Then, these templates are combined with the functional monomers through coordination, electrostatic or hydrogen bonding. The functional monomers simultaneously surround and fix the templates, after which the cross-linkers and functional monomers polymerize to prepare ion-imprinted polymers with a specific structure and composition. Finally, the imprinted holes are created in the polymers by eluting the template ions. Therefore, the template molecules, functional monomers, and cross-linkers are three precursors necessary for synthesizing ion-imprinted polymers. These polymers can specifically bind to the imprinted metal ions with accuracy, sensitivity, and reliability. In recent years, they have been widely used in separating, enriching, analyzing, and detecting elemental species. During solid-phase extraction, the non-magnetic adsorbent materials dispersed in the sample solution need to be separated by centrifugation or filtration, which is time-consuming and laborious. Because an external magnetic field can be used for rapid magnetic solid-phase extraction, it has become a potential method for separating and enriching elemental species. This review systematically summarizes the latest progress in ion-imprinting technology, including its principle and the preparation methods of ion-imprinted polymers. The challenges faced by ion imprinting technology are analyzed in the context of the development of ion-imprinting magnetic solid-phase extraction in elemental speciation analysis. Finally, the direction of future development and the strategies of ion imprinting technology in elemental speciation analysis are proposed. It is important to exploit novel organic-inorganic hybrid polymerization-based multifunctional ion-imprinted magnetic nanocomposites for the magnetic solid-phase extraction and separation of elemental species. By establishing the pretreatment protocols with high recognition selectivity, strong separation ability, large adsorption capacity, and good speciation stability, we expect to achieve the research objectives of simultaneously separating and enriching the multiple-species of typical metal/metalloid elements in environmental and biological samples.

Influence of Synthesis Parameters and Polymerization Methods on the Selective and Adsorptive Performance of Bio-Inspired Ion Imprinted Polymers

Ion-imprinted polymers (IIPs) have been widely used in different fields of Analytical Sciences due to their intrinsic selective properties. However, the success of chemical imprinting in terms of selectivity, as well as the stability, specific surface area, and absence of swelling effect depends on fully understanding the preparation process. Therefore, the proposal of this review is to describe the influence of relevant parameters on the production processes of ion-imprinted polymers, including the nature (organic, inorganic, or hybrid materials), structure, properties of the salt (source of the metal ion), ligand, crosslinking agent, porogenic solvent, and initiator. Additionally, different polymerization methods are discussed, the classification of IIPs as well as the applications of these adsorbent materials in the last years (2017–2022).

Applied Analytical Methods for Detecting Heavy Metals in Medicinal Plants

For thousands of years, medicinal plants (MPs) have been one of the main sources of drugs worldwide. However, recently, heavy metal pollution has seriously affected the quality and safety of MPs. Consuming MPs polluted by heavy metals such as Pb, Hg, and Cu significantly threaten the health of consumers. To manage this situation, the levels of heavy metals in MPs must be controlled. In recent years, this field has attracted significant attention, but few researchers have systematically summarized various analytical methods. Therefore, it is necessary to investigate methods that can accurately and effectively detect the amount of heavy metals in MPs. Herein, some important analytical methods used to detect heavy metals in MPs and their applications have been introduced and summarized in detail. These include atomic absorption spectrometry, atomic fluorescence spectrometry, inductively coupled plasma mass spectrometry, inductively coupled plasma atomic emission spectrometry, X-ray fluorescence spectrometry, neutron activation analysis, and anodic stripping voltammetry. The characteristics of these methods were subsequently compared and analyzed. In addition, high-performance liquid chromatography, ultraviolet spectrophotometry, and disposable electrochemical sensors have also been used for heavy metal detection in MPs. To elucidate the systematic and comprehensive information, these methods have also been briefly introduced in this review.