Use of fibrous TiO2@graphitic carbon nitride nanocomposites in dispersive micro-solid phase extraction for arsenic species before inductively coupled plasma mass spectrometry determination

Arsenic speciation by using emerging sample preparation techniques: a review

Arsenic is a hazardous element that causes environmental pollution. Due to its toxicological effects, it is crucial to quantify and minimize the hazardous impact on the ecology. Despite the significant advances in analytical techniques, sample preparation is still crucial for determining target analytes in complex matrices. Several factors affect the direct analysis, such as trace-level analysis, advanced regulatory requirements, complexity of sample matrices, and incompatible with analytical instrumentation. Along with the development in the sample preparation process, microextraction methods play an essential role in the sample preparation process. Microextraction techniques (METs) are the newest green approach that replaces traditional sample preparation and preconcentration methods. METs have minimized the limitation of conventional sample preparation methods while keeping all their benefits. METs improve extraction efficacy, are fast, automated, use less amount of solvents, and are suitable for the environment. Microextraction techniques with less solvent consumption, such as solid phase microextraction (SPME) solvent-free methods, and liquid phase microextraction (LPME), are widely used in modern analytical procedures. SPME development focuses on synthesizing new sorbents and applying online sample preparation, whereas LPME research investigates the utilization of new solvents.

Design and development of second-generation fabric phase sorptive extraction membranes: Proof-of-concept for the extraction of organophosphorus pesticides from apple juice prior to GC-MS analysis

In this work, different sol-gel sorbent-coated second-generation fabric phase sorptive extraction (FPSE) membranes were synthesized using titania-based sol-gel precursors. The proposed membranes were tested for their efficiency to extract eleven selected organophosphorus pesticides (OPPs) from apple juice samples. Among the examined materials, sol-gel C₁₈ coated titania-based FPSE membranes showed the highest extraction efficiency. These membranes were used for the optimization and validation of an FPSE method prior to analysis by gas chromatography-mass spectrometry. The detection limits for OPPs ranged between 0.03 and 0.08 ng mL^-1. Moreover, the relative standard deviation was < 8.2% and 8.4% for intra-day and inter-day studies, respectively. The relative recoveries were 91-110% (intra-day study) and 90-106% (inter-day study) for all the target analytes, demonstrating good overall method accuracy. Moreover, the novel membranes were reusable at least 5 times. The titania-based membranes were compared to the conventional silica-based membranes and their utilization resulted in higher extraction recoveries.

Determination and speciation of trace inorganic arsenic species in water samples by using metal organic framework mixed-matrix membrane and EDXRF spectrometry

A facile method to selectively determine trace As(V) species in the existence of As(III) one in water samples was developed, which was based on the batch adsorption process by using a miniaturized MIL-101(Fe) mixed-matrix membrane (MOF-MMM) followed by a direct determination through energy dispersive X-ray fluorescence (EDXRF) spectrometry. The quantitative adsorption of As(V) was achieved at pH (3-6) from 30 mL sample in 120 min of equilibrium time by employing the membrane with a monolayer adsorption capacity of Q_o = 1.953 mg g^-1. The direct determination of As(V) adsorbed on the membrane by EDXRF spectroscopy provided a method, not only easy-to-use and operable without elution stage, but also cost effective due to low gas consumption during the analysis. With a limit of detection of 0.094 μg L^-1, analytical performance of the method, which was evaluated on fortified real water samples with three levels of As(V) (5, 10 and 50 μg L^-1), demonstrated good recoveries in the range of 98(±3)-105(±10)%. Furthermore, the speciation of As(III) and As(V) in the fortified real samples containing other ionic species was also successfully achieved by described approach with characteristics of simple, cheap, viable and reproducible.

A new method for highly efficient separation and determination of arsenic species in natural water using silica modified with polyamines

A simple and highly efficient method for the determination of highly toxic arsenic species using non-covalently aminated silica is proposed. The polyamines including poly(hexamethyleneguanidine), poly(4,9-dioxadodecane-1,12-guanidine), hexadimethrine, and poly(diallyldimethylammonium) were tested as silica modifiers. The prepared adsorbents allow effective preconcentration of anionic species of arsenic from aqueous solutions. It was found that As(V) can be quantitatively extracted from solutions at pH 4.5-7.0 by the anion exchange mechanism in less than 5 min, while neutral at this pH As(III) was not adsorbed at these conditions. A reaction with 2,3-dimercapto-1-propanesulphonic acid, which resulted in the formation of the negatively charged complex of As(III) with adsorbents was used for its quantitative extraction from solutions with a pH of 3.5-6.5. A system of two cartridges filled with poly(diallyldimethylammonium) modified silica and the on-line reaction of As(III) with 2,3-dimercapto-1-propanesulphonic acid proceeding between the cartridges was used for separate preconcentration and determination of As(V) and As(III) at pH 5. The proposed method was used for four-year monitoring of natural water pollution by arsenic in the area of residence of the indigenous peoples of Tyva Republic (Russia).

Magnetic dispersive micro-solid phase extraction coupled with dispersive liquid-liquid microextraction followed by graphite furnace atomic absorption spectrometry for quantification of Se(IV) and Se(VI) in food samples

In this work, magnetic dispersive micro-solid phase extraction (MDMSPE) coupled with dispersive liquid-liquid microextraction (DLLME) was developed for Se(IV) and Se(VI) followed by graphite furnace atomic absorption spectrometry. MDMSPE involved the use of magnetic ZnFe₂O₄ nanotubes for adsorbing Se(VI). The sorbent was isolated from aqueous phase by using an external magnetic field instead of tedious centrifugation or filtration. In the following step, Se(IV) in the upper aqueous phase of MDMSPE was enriched by DLLME. Samples were prepared with artificial gastric juice to avoid the inter-conversion of target species. The main factors affecting the determination of the analytes were studied in detail. the detection limits of this method were 1.0 and 1.3 pg mL^-1 for Se(IV) and Se(VI) with relative standard deviations of 4.6% and 5.1% (c = 1.0 ng mL^-1, n = 9), respectively. An enrichment factor of 200 was obtained. This method was used for the detection of Se(IV) and Se(VI) in food samples without any pre-oxidation or pre-reduction operation. A certified reference material of milk powder was analysed by this method, and the determined values were in good agreement with the certified values. Recoveries of spike experiments were in the range of 91.0-107%.

Amine functionalized polyacrylonitrile fibers for the selective preconcentration of trace metals prior to their on-line determination by ICP-MS

Amine functionalized polyacrylonitrile fibers (PANFs) were prepared and applied for the simultaneous separation and preconcentration of V(v), As(iii), Sn(iv), Sb(iii) and Bi(ii) from environmental water samples in this paper. The functional PANFs were first prepared by nucleophilic substitution reaction between hydroxylamine hydrochloride and polyacrylonitrile fibers, and then the reactant obtained in the first step was subjected to a ring opening reaction with epichlorohydrin, followed by modification with triethylenetetramine (TETA). The structure of the final polymer fibers was analyzed by Fourier transform infrared spectroscopy (FT-IR), and the morphology was characterized by scanning electron microscopy (SEM). A home-made solid phase extraction (SPE) pretreatment column was filled with PANFs, and then online connected with inductively coupled plasma mass spectrometry (ICP-MS) for quantitative determination of metal ions. Under the optimized experimental conditions, the target metal ions were eluted rapidly and quantitatively using 0.3 mol L-1 HNO3 solution. Only with 30 mL sample solution, high enrichment factors of 120 were obtained for V(v), As(iii), Sn(iv) and Sb(iii), and 115 for Bi(ii), respectively. The detection limits achieved were low: 1.2, 0.9, 1.7, 1.5 and 2.3 ng L-1 for V(v), As(iii), Sn(iv), Sb(iii) and Bi(ii), respectively, and the relative standard deviations (RSDs) were below 3.0%. The advanced fiber materials prepared in this work have the advantages of low cost, environmental friendliness and high adsorption efficiency, and the on-line preconcentration method has greatly improved the analysis efficiency. Finally, the feasibility and accuracy of the method were validated by successfully analyzing Certified Reference Materials (CRMs) as well as lake, river and sea water samples.