Synthesis of two-dimensional nanosheet like samarium molybdate with abundant active sites: real-time carbendazimin analysis in environmental samples

Cobalt molybdate hollow spheres decorated graphitic carbon nitride sheets for electrochemical sensing of dimetridazole

In the present work, a cobalt molybdate (CoMoO4) hollow spheres-incorporated graphitic carbon nitride (g-CN) composite is prepared for the electrochemical detection of dimetridazole (DZ). The synergistic effect between the hollow-structured CoMoO4 and g-CN nanosheets facilitates the transportation of electrons through kinetic barriers, thereby providing a high electrical conductivity with increased electroactive sites. The proposed CoMoO4@g-CN-modified electrode displayed a wide linear range (0.001-492.77 μM) and a lower detection limit (LOD: 0.4 nM) for the determination of DZ through the amperometry (i-t) method. In addition, the CoMoO4@g-CN-modified electrode achieved good operational stability, anti-interfering ability (five-fold excess amount of co-interfering compounds) and reproducibility. These results demonstrate the increased electrocatalytic activity of CoMoO4@g-CN modified glassy carbon electrode (GCE) towards the detection of DZ in food samples with satisfactory recovery ranges.

Electroanalytical overview: the sensing of carbendazim

Carbendazim is a broad-spectrum systemic fungicide that is used to control various fungal diseases in agriculture, horticulture, and forestry. Carbendazim is also used in post-harvest applications to prevent fungal growth on fruits and vegetables during storage and transportation. Carbendazim is regulated in many countries and banned in others, thus, there is a need for the sensing of carbendazim to ensure that high levels are avoided which can result in potential health risks. One approach is the use of electroanalytical sensors which present a rapid, but highly selective and sensitive output, whilst being economical and providing portable sensing platforms to support on-site analysis. In this minireview, we report on the electroanalytical sensing of carbendazim overviewing recent advances, helping to elucidate the electrochemical mechanism and provide conclusions and future perspectives of this field.

Emerging carbonate anion intercalated- ZnCr-layered double hydroxide/vanadium carbide nanocomposite: Sustainable design strategies based on disposal electrochemical sensor for diethofencarb fungicide monitoring

Diethofencarb (DFC) is widely used in agriculture to fight against plant fungal attacks and enhance food crop production. On the other hand, the National food safety standard has set the overall maximum residual limit (MRL) of DFC to be 1 mg/kg. Hence it becomes essential to limit their usage, and it is vital to quantify the amount of DFC present in real-life samples to safeguard the health and environmental well-being. Here, we introduce a simple hydrothermal procedure for preparing vanadium carbide (VC) anchored by ZnCr-LDH. The sustainably designed electrochemical sensor for the detection of DFC portrayed high electro-active surface area, conductivity, rapid-electron transport ratio, and high ion diffusion parameters. The obtained structural and morphological information confirms the enriched electrochemical activity of the ZnCr-LDH/VC/SPCE towards DFC. The ZnCr-LDH/VC/SPCE electrode has displayed exceptional characteristics with DPV resulting in a vast linear response (0.01-228 μM), and lower LOD (2 nM) with high sensitivity. Real-sample analysis was carried out to demonstrate the specificity of the electrode with an acceptable recovery in both water (±98.75-99.70%) and tomato (±98.00-99.75%) samples.

Simple pyrolysis of graphene-wrapped PtNi nanoparticles supported on hierarchically N-doped porous carbon for sensitive detection of carbendazim

A novel electrochemical sensor was established based on graphene-wrapped PtNi nanoparticles supported on three-dimensional (3D) N-doped porous carbon (G-PtNi/3D-NPC) for the highly sensitive and selective detection of carbendazim (CBZ). In this sensing system, the encapsulation of PtNi nanoparticles (NPs) by graphene can effectively prevent the aggregation tendency and enhance the structural stability. The hierarchically porous nanostructures have a large specific surface area to expose a large number of active sites and the resulting enhanced electrical conductivity ultimate improves the electrocatalytic activity towards CBZ. Under the optimal conditions, the prepared sensor showed excellent electrochemical responses for the determination of CBZ with a linear range of 0.5-30 μM and lower limit of detection (LOD) of 0.04 μM (S/N = 3). It also shows excellent anti-interference ability at a working potential of 0.74 V. The feasibility of the senor is demonstrated for its practical assays in diluted peach and vegetable samples with acceptable recovery (95.8-97.3 %, peach; 97.2-97.6 %, vegetable) and a relative standard deviation (RSD) below 2.3%.

In Situ Synthesis of a Bismuth Vanadate/Molybdenum Disulfide Composite: An Electrochemical Tool for 3-Nitro-l-Tyrosine Analysis

The quantification of 3-nitro-l-tyrosine (NO₂-Tyr), an in vivo biomarker of nitrosative stress, is indispensable for the clinical intervention of various inflammatory disorders caused by nitrosative stress. By integrating the unique features of BiVO₄ and MoS₂ with matching bandgap energies, electrode materials with amplified response signals can be developed. In this regard, we introduce a hydrothermally synthesized bismuth vanadate sheathed molybdenum disulfide (MoS₂@BiVO₄) heterojunction as a highly sensitive electrode material for the determination of NO₂-Tyr. Excellent electrochemical behavior perceived for the MoS₂@BiVO₄ augments the performance of the sensor and allows the measurement of NO₂-Tyr in biological media without any time-consuming pretreatments. The synergistic interactions between BiVO₄ and MoS₂ heterojunctions contribute to low resistance charge transfer (R_ct = 159.13 Ω·cm²), a reduction potential E_pc = -0.58 V (vs Ag/AgCl), and a good response range (0.001-526.3 μM) with a lower limit of detection (0.94 nM) toward the detection of NO₂-Tyr. An improved active surface area, reduced charge recombination, and high analyte adsorption contribute to the high loading of the biomarker for improved selectivity (in the presence of 10 interfering compounds), operational stability (1000 s), and reproducibility (six various modified electrodes). The proposed sensor was successfully utilized for the real-time determination of NO₂-Tyr in water, urine, and saliva samples with good recovery values (±98.94-99.98%), ascertaining the reliability of the method. It is noteworthy that the electrochemical activity remains unaffected by other redox interferons, thus leading to targeted sensing applications.

3D-flower-like porous neodymium molybdate nanostructure for trace level detection of organophosphorus pesticide in food samples

Herein we report (i) designing of porous 3D flower-like neodymium molybdate nanosheets (pf-NdM NSs) and (ii) attaining reasonable selectivity towards methyl parathion (MP, organophosphate pesticide) in the presence of structurally comparable interferents. Herein the pf-NdM NSs as a catalyst for electrochemical detection of MP in food samples is reported for the first time. Because of porous morphology, and high surface area, the proposed catalyst offers a high electrocatalytic activity toward MP reduction. As a result, a low detection limit (5.7 nM), wide linear range (0.5 - 300 μM), and good sensitivity (1.88 µA µM^-1 cm^-2), with decent selectivity were achieved. Further, the real sample analysis in tomato juice, and paddy grains, yielded good recovery results, demonstrating the practicability of the proposed sensor. Overall, our study presents a method for designing a novel-nanostructured material for trace-level detection of pesticides that is simple to fabricate, and also delivers a good performance.

Electrochemical Behavior of Three-Dimensional Cobalt Manganate with Flowerlike Structures for Effective Roxarsone Sensing

Rational design and construction of the finest electrocatalytic materials are important for improving the performance of electrochemical sensors. Spinel bioxides based on cobalt manganate (CoMn₂O₄) are of particular importance for electrochemical sensors due to their excellent catalytic performance. In this study, three-dimensional CoMn₂O₄ with the petal-free, flowerlike structure is synthesized by facile hydrothermal and calcination methods for the electrochemical sensing of roxarsone (RXS). The effect of calcination temperature on the characteristics of CoMn₂O₄ was thoroughly studied by in-depth electron microscopic, spectroscopic, and analytical methods. Compared to previous reports, CoMn₂O₄-modified screen-printed carbon electrodes display superior performance for the RXS detection, including a wide linear range (0.01-0.84 μM; 0.84-1130 μM), a low limit of detection (0.002 μM), and a high sensitivity (33.13 μA μM^-1 cm^-2). The remarkable electrocatalytic performance can be attributed to its excellent physical properties, such as good conductivity, hybrid architectures, high specific surface area, and rapid electron transportation. More significantly, the proposed electrochemical sensor presents excellent selectivity, good stability, and high reproducibility. Besides, the detection of RXS in river water samples using the CoMn₂O₄-based electrochemical sensor shows satisfactory recovery values in the range of 98.00-99.80%. This work opens a new strategy to design an electrocatalyst with the hybrid architecture for high-performance electrochemical sensing.

Hierarchical nanoarchitecture of zirconium phosphate/graphene oxide: Robust electrochemical platform for detection of fenitrothion

We report the rational design of nanocomposite with zirconium phosphate encapsulated on graphene oxide (ZrP/GO) for the highly sensitive and selective analysis of fenitrothion (FT). The characteristics of ZrP/GO nanocomposite are systematically analyzed by various in-depth electron microscopic, spectroscopic and analytical techniques. The ZrP/GO nanocomposite modified electrodes show better electrochemical response towards FT than other electrodes. The improved electrochemical activity of nanocomposite is attributed to large surface area, high conductivity, numerous active surface sites, GO nanosheets served as the conductivity matrix while preventing ZrP from agglomeration and the synergistic effect of ZrP and GO. Benefitting from the unique features, our fabricated sensor exhibits the superior performance in terms of wide working range (0.008-26 μM), appropriate peak potential (-0.61 V), low limit of detection (0.001 µM), high sensitivity (6 µA µM^-1 cm^-2) with the regression coefficient of 0.999. Additionally, the electrochemical sensor also displays good selectivity, excellent stability (99.6%), reproducibility (4.9%) and reusability (6.1%). The practical applicability of ZrP/GO sensor is shown by performing the detection of FT in water samples. These results clearly suggest that the ZrP/GO nanocomposite is an efficient electrode material for the future real-time environmental monitoring of FT.

Construction of strontium phosphate/graphitic-carbon nitride: A flexible and disposable strip for acetaminophen detection

A facile technique has been used to synthesize the strontium phosphate interlinked with graphitic carbon nitride nanosheets (SrP/g-CN NSs) nanocomposite for highly selective detection of acetaminophen (AP). The formation of SrP/g-CN NSs nanocomposite is evidenced by several spectroscopic and analytical methods. It was demonstrated that the SrP/g-CN NSs modified screen-printed carbon electrode (SPCE) exhibits excellent catalytic performance with low peak potential towards AP detection than those of pristine SrP-, g-CN NSs-, and bare- SPCEs. The outstanding electrochemical performance can be attributed to the robust synergistic effect between SrP and g-CN NSs. Likewise, g-CN NSs possess a porous multilayer network, which provides a large surface area, fast charge transferability, electrical conductivity, and numerous active sites. Under the optimal conditions, the fabricated sensor could detect AP with a linear relationship range from 0.01 to 370 µM, and the detection limit is calculated to be as low as 2.0 nM. The proposed sensor is successfully used to determine AP in water samples with satisfactory results.