Developing an ultrasonic-assisted d-µ-SPE method using amine-modified hierarchical lotus leaf-like mesoporous silica sorbent for the extraction and trace detection of lamotrigine and carbamazepine in biological samples

Thiol-yne click post-synthesis of phenylboronic acid-functionalized magnetic cyclodextrin microporous organic network for selective and efficient extraction of antiepileptic drugs

Owing to their incomplete digestion in the human body and inadequate removal by sewage treatment plants, antiepileptic drugs (AEDs) accumulate in water bodies, potentially affecting the exposed humans and aquatic organisms. Therefore, sensitive and reliable detection methods must be urgently developed for monitoring trace AEDs in environmental water samples. Herein, a novel phenylboronic acid-functionalized magnetic cyclodextrin microporous organic network (Fe3O4@CD-MON-PBA) was designed and synthesized via the thiol-yne click post-modification strategy for selective and efficient magnetic solid-phase extraction (MSPE) of trace AEDs from complex sample matrices through the specific B-N coordination, π-π, hydrogen bonding, electrostatic, and host-guest interactions. Fe3O4@CD-MON-PBA exhibited a large surface area (118.5 m2 g-1), rapid magnetic responsiveness (38.6 emu g-1, 15 s), good stability and reusability (at least 8 times), and abundant binding sites for AEDs. Under optimal extraction conditions, the proposed Fe3O4@CD-MON-PBA-MSPE-HPLC-UV method exhibited a wide linear range (0.5-1000 μg L-1), low limits of detection (0.1-0.5 μg L-1) and quantitation (0.3-2 μg L-1), good anti-interference ability, and large enrichment factors (92.2-104.3 to 92.3-98.0) for four typical AEDs. This work confirmed the feasibility of the thiol-yne click post-synthesis strategy for constructing novel and efficient multifunctional magnetic CD-MONs for sample pretreatment and elucidated the significance of B-N coordination between PBA and N-containing AEDs.

Preparation of a β-cyclodextrin grafted magnetic biochar for efficient extraction of four antiepileptic drugs in plasma samples

Simultaneous monitoring of plasma concentration levels of multiple antiepileptic drugs (AEDs) is essential for dose adjustment in comprehensive epilepsy treatment, necessitating a sensitive technique for accurate extraction and determination of AEDs. Herein, a magnetic solid-phase extraction (MSPE) technique on the basis of modified biochar (BC) is investigated to extract four AEDs from plasma, in conjunction with high performance liquid chromatography. BC derived from Zizyphus jujuba seed shells was activated by phosphoric acid (PBC) and magnetized via coprecipitation to produce MPBC. The MPBCCD obtained after modification with β-cyclodextrin (CD) was characterized and evaluated for adsorption. It exhibited fast adsorption kinetics based on second-order kinetics and satisfactory adsorption capacity for AEDs. Then it was employed as the MSPE adsorbent and the influencing parameters were optimized. The enrichment factor was 18.75. The validation analysis revealed a favorable linearity that ranged from 0.04 to 20 μg·mL-1 along with a low limit of detection of 6.85 to 10.19 ng·mL-1. The recovery of the AEDs ranged from 78.7 to 109.2 %, with relative standard deviations below 6.7 %. Using quantum chemistry theory calculations and experimental results analysis, the adsorption mechanism was investigated. It disclosed that the suggested strategy built upon MPBCCD was appropriate for the assessment of AEDs in plasma and expanded the usage of BC as the environmentally favorable matrix for the analysis of biological samples.

Selective extraction of apixaban from plasma by dispersive solid-phase microextraction using magnetic metal organic framework combined with molecularly imprinted polymer nanocomposite

This research aims to synthesize a specific and efficient sorbent to use in the extraction of apixaban from human plasma samples and its determination by high-performance liquid chromatography-tandem mass spectrometry. High specific surface area of metal-organic framework, magnetic property of iron oxide nanoparticles, selectively of molecular imprinted polymer toward the analyte, and the combination of dispersive solid-phase extraction method with a sensitive analysis system provided an efficient analytical method. In this study, first, a molecularly imprinted polymer combined with magnetic metal organic framework nanocomposite was prepared and then characterized using different techniques. Then the sorbent particles were used for selective extraction of the analyte from plasma samples. The efficiency of the method was improved by optimizing effective parameters. According to the validation results, wide linear range (1.02-200 ng mL-1 ), acceptable coefficient of determination (0.9938), low limit of detection (0.32 ng mL-1 ) and limit of quantification (1.02 ng mL-1 ), high extraction recovery (78%), and good precision (relative standard deviations ≤ 2.9% for intra- (n = 6) and interday (n = 6) precisions) were obtainable using the proposed method. These outcomes showed the high potential of the proposed method for screening apixaban in the human plasma samples.

Bifunctional Amine- and Thiol-Modified Ti3C2Tx MXene for Trace Detection of Heavy Metals

Surface functionalization of two-dimensional (2D) transition metal carbides, nitrides, and carbonitrides, also known as MXenes, is a powerful approach for modification of their physical and chemical properties for new applications. In this study, we demonstrate the synthesis of a bifunctional Ti₃C₂T_x MXene modified with amine and thiol groups through a facile condensation reaction. We successfully employed the resulting NH₂/SH-Ti₃C₂T_x MXene as a solid phase in the ultrasonic-assisted dispersive micro solid-phase extraction (d-μ-SPE) method for the analytical determination of heavy metals at trace levels in food and soil samples. The prepared NH₂/SH-Ti₃C₂T_x MXene showed remarkable performance in the ultrasonic-assisted d-μ-SPE method with limits of detection of 0.12 and 2.30 ng mL^-1, with linear dynamic ranges of 0.50-90 μg L^-1 and 10-120 μg L^-1 for cadmium (Cd²⁺) and lead (Pb²⁺) ions, respectively. Furthermore, the extraction efficiencies were greater than 97%, with a relative standard deviation of less than 3% for five separate batch experiments in the determination of 5.0 μg L^-1 of Cd²⁺ and Pb²⁺. This study shows that NH₂/SH-Ti₃C₂T_x can be used as a simple, rapid, reliable, selective, and sensitive material in the d-μ-SPE method for the trace determination of Cd²⁺ and Pb²⁺ in soil and agricultural products. This study demonstrates the utility of MXenes for analytical chemistry and suggests that further advances in methods for the functionalization of MXenes can open new applications for these already exciting materials.

Recent advances of ordered mesoporous silica materials for solid-phase extraction

This review mainly focuses on the development and application of ordered mesoporous silica materials for solid-phase extraction in recent years. It overviews not only bare mesoporous silica but also the functionalized mesoporous silica with organic groups, molecularly imprinted polymers, and magnetic materials. These mesoporous silica materials were used as the extraction adsorbents in cartridge solid-phase extraction, dispersive solid-phase extraction, magnetic solid-phase extraction, micro-solid-phase extraction and matrix solid phase dispersion. Coupled with atomic emission spectrometry, chromatography or other detection methods, these techniques efficiently extracted and sensitively determined various targets, such as metal ions, perfluorocarboxylic acids, pesticides, drugs, endocrine disruptors, phenols, flavanones, polycyclic aromatic hydrocarbons, parabens and so on. Based on unique advantages of mesoporous silica materials, the developed analytical method successfully analyzed different matrix samples, like environmental water samples, soil samples, food samples, biological samples and cosmetics. In addition, the prospects of these materials in solid-phase extraction are presented, which can offer an outlook for the further development and applications.

Extraction and Purification of Inulin from Jerusalem Artichoke with Response Surface Method and Ion Exchange Resins

Inulin is used as an important food ingredient, widely used for its fiber content. In this study the operational extraction variables to obtain higher yields of inulin from Jerusalem artichoke tubers, as well as the optimal conditions, were studied. Response surface methodology and Box-Behnken design were used for optimization of extraction steps. The optimal extraction conditions were as follows: extraction temperature 74 °C, extraction time 65 min, and ratio of liquid to solid 4 mL/g. Furthermore, series connection of ion-exchange resins were used to purify the extraction solution where the optimal resin combinations were D202 strongly alkaline anion resin, HD-8 strongly acidic cation resin, and D315 weakly alkaline resin while the decolorization rate and decreased salinity reached 99.76 and 93.68, respectively. Under these conditions, the yield of inulin was 85.4 ± 0.5%.

ZIF-8/nitrogen-doped reduced graphene oxide as thin film microextraction adsorbents for simultaneous determination of novel halogenated flame retardants in crayfish-aquaculture water systems

Novel halogenated flame retardants (HFRs) have attracted much attention due to their environmental hazard and adverse effects on human health. In this study, a sensitive and simultaneous method for the determination of six novel HFRs was developed, including tetrabromobisphenol A (TBBPA), tetrachlorobisphenolA, TBBPA bis(2-hydroxyethyl ether), TBBPA bis(allyl ether), TBBPA bis(2,3-dibromopropyl ether) and 2,4,6-tris(2,4,6-tribromophenoxy)-1,3,5-triazine. ZIF-8 modified nitrogen-doped reduced graphene oxide (ZIF-8@N-rGO) was synthesized and coated onto a syringe filter to prepare a thin film microextraction (TFME) device. The adsorption capacities of ZIF-8@N-rGO for novel HFRs ranged from 50.98 to 112.84 mg g^-1, exhibiting good extraction efficiency through a combination of π-π, hydrophobic, and hydrogen bonding interactions. The TFME device was coupled to a high-performance liquid chromatography-ultraviolet detection system to simultaneously determine target HFRs in crayfish-aquaculture water systems. Under the optimal extraction parameters, the linearities ranged from 0.1 to 100 ng mL^-1. The method detection limits ranged from 0.030 to 0.14 ng mL^-1 and relative recoveries ranged from 88.6 to 106.2%. We found that novel HFRs were detected in water and crayfish samples and were primarily distributed in the viscera and head shell of the crayfish. The bioconcentration factors ranged from 0.25 to 19.20 L kg^-1, indicating non-bioaccumulation in the crayfish. This study provides valuable technology and information for potential health risks of exposure to novel HFRs from consuming crayfish.

Chitosan biofilms: Insights for the selective electromembrane extraction of fluoroquinolones from biological samples

A selective electromembrane extraction procedure for the extraction of Enrofloxacin, Marbofloxacin and Flumequine, usually employed as antibiotic in veterinarian use, is proposed by using a chitosan biofilm, composed by 60% (w/w) chitosan and 40% (w/w) Aliquat®336, as active biopolymeric support. The interaction mechanism occurring between the target drugs and the biopolymer has been deeply studied using the Quantum Theory of Atoms in Molecules. The obtained results show the interaction between the extracted fluoroquinolones and the biomembrane is stabilized by two hydrogen bonds formed between both the carboxyl and keto groups of the drugs with both the amine and hydroxyl groups of glucosamine in the biopolymer. The energetic results agree with the high extraction efficiency obtained for Marbofloxacin, Enrofloxacin and Flumequine in terms of enrichment factors (83, 82 and 58, respectively) in presence of other fluoroquinolones. Under optimum conditions, the proposed electromembrane extraction method exhibits wide linear ranges of 4.2-200 μg L^-1, 5.6-200 μg L^-1 and 5.1-200 μg L^-1, respectively; low limits of detection close to 1.3 μg L^-1 and appropriate repeatability (relative standard deviation values 4-7%).