A simple label-free photoelectrochemical aptasensor for ultrasensitive detection of thrombin

Highly efficient photoelectrochemical aptasensor based on CdS/CdTe QDs co-sensitized TiO2 nanoparticles designed for thrombin detection

A photoelectrochemical (PEC) sensor for the sensitive detection of thrombin (TB) was established. Co-sensitized combination of TiO2 nanoparticles combined with modified cadmium sulfide and cadmium telluride quantum dots (CdS/CdTe QDs) was utilized as a photoactive material. Successful growth of CdS/CdTe quantum dots on mesoporous TiO2 films occured by successive ion-layer adsorption and reaction. This interesting formation of co-sensitive structure is conducive to enhancing the photocurrent response by improving the use rate of light energy. Additionally, the step-level structure of CdS/CdTe QDs and TiO2 NPs shows a wide range of visible light absorption, facilitating the dissociation of excitons into free electrons and holes. Consequently, the photoelectric response of the PEC analysis platform is significantly enhanced. This constructed PEC aptasensor shows good detection of thrombin with a low detection limit (0.033 pM) and a wide linear range (0.0001-100 nM) in diluted actual human serum samples. In addition, this PEC aptasensor also has the characteristics of good stability and good reproducibility, which provides a novel insight for the quantitative measurement of other similar analytes.

Carbon dots doped with nitrogen as an ultrasensitive fluorescent probe for thrombin activity monitoring and inhibitor screening

A simple and sensitive fluorometric assay based on nitrogen-doped carbon dots (N-CDs) was developed for the determination of thrombin (TB) activity in human serum samples and living cells. The novel N-CDs were prepared by a facile one-pot hydrothermal method using 1,2-ethylenediamine and levodopa as precursors. Such N-CDs exhibited green fluorescence with excitation/emission peaks at 390/520 nm and a high fluorescence quantum yield of approximately 39.2%. H-D-Phenylalanyl-L-pipecolyl-Larginine-p-nitroaniline-dihydrochloride (S-2238) was hydrolyzed by TB to produce p-nitroaniline which was capable of quenching the fluorescence of N-CDs due to an inner filter effect. This assay was used to detect TB activity with a low detection limit of 11.3 fM. The proposed sensing method was then expanded to the TB inhibitor screening and exhibited excellent applicability. As a typical TB inhibitor, argatroban was determined in a concentration as low as 1.43 nM. The method has also been successfully employed for the determination of TB activity in living HeLa cells. This work showed significant potential for TB activity assay in clinical and biomedicine applications.

Recent Progresses in Development of Biosensors for Thrombin Detection

Thrombin is a serine protease with an essential role in homeostasis and blood coagulation. During vascular injuries, thrombin is generated from prothrombin, a plasma protein, to polymerize fibrinogen molecules into fibrin filaments. Moreover, thrombin is a potent stimulant for platelet activation, which causes blood clots to prevent bleeding. The rapid and sensitive detection of thrombin is important in biological analysis and clinical diagnosis. Hence, various biosensors for thrombin measurement have been developed. Biosensors are devices that produce a quantifiable signal from biological interactions in proportion to the concentration of a target analyte. An aptasensor is a biosensor in which a DNA or RNA aptamer has been used as a biological recognition element and can identify target molecules with a high degree of sensitivity and affinity. Designed biosensors could provide effective methods for the highly selective and specific detection of thrombin. This review has attempted to provide an update of the various biosensors proposed in the literature, which have been designed for thrombin detection. According to their various transducers, the constructions and compositions, the performance, benefits, and restrictions of each are summarized and compared.

Nanomaterial-Based Label-Free Electrochemical Aptasensors for the Detection of Thrombin

Thrombin plays a central role in hemostasis and its imbalances in coagulation can lead to various pathologies. It is of clinical significance to develop a fast and accurate method for the quantitative detection of thrombin. Electrochemical aptasensors have the capability of combining the specific selectivity from aptamers with the extraordinary sensitivity from electrochemical techniques and thus have attracted considerable attention for the trace-level detection of thrombin. Nanomaterials and nanostructures can further enhance the performance of thrombin aptasensors to achieve high sensitivity, selectivity, and antifouling functions. In highlighting these material merits and their impacts on sensor performance, this paper reviews the most recent advances in label-free electrochemical aptasensors for thrombin detection, with an emphasis on nanomaterials and nanostructures utilized in sensor design and fabrication. The performance, advantages, and limitations of those aptasensors are summarized and compared according to their material structures and compositions.

Photoelectrochemical aptasensing for thrombin based on exonuclease III-assisted recycling signal amplification and nanoceria enzymatic strategy

In the present work, a capture DNA (c-DNA) was immobilized on the TNA/g-C₃N₄ to develop a sensitive and selective TNA/g-C₃N₄/c-DNA photoelectrochemical aptasensor for determining thrombin. With the aid of the specific recognition of anti-thrombin aptamer towards thrombin, ingenious design of hairpin DNA, and exonuclease III-assisted recycling signal amplification, more nanoceria could be assembled on the TNA/g-C₃N₄/c-DNA to form TNA/g-C₃N₄/nanoceria in the presence of thrombin. Due to the oxidase-mimic catalytic efficiency of nanoceria and the oxygen consumption for glucose oxidation, the photoexcited electrons at the conduction band of g-C₃N₄ could be well transferred to that of TNA under visible light irradiation, resulting in the increase of the photocurrent of TNA/g-C₃N₄/nanoceria, and the increase value of photocurrent had a linear relationship with the concentration of thrombin under the optimal conditions. So, the constructed TNA/g-C₃N₄/c-DNA photoelectrochemical aptasensor exhibited a satisfactory quantitative range from 0.01 pM to 0.5 nM, low detection limit with 3.4 fM for thrombin determination, and was applied for the human serum analysis successfully with RSD of less than 4.8% and the recovery between 95% and 113%.

Proximity hybridization triggered hybridization chain reaction for label-free electrochemical homogeneous aptasensors

A label-free homogeneous electrochemical aptasensor was developed for detection of thrombin based on proximity hybridization triggered hybridization chain reaction induced G-quadruplex formation. Thrombin promoted the formation of a complex via the proximity hybridization of the aptamer DNA strands, which unfolded the molecular beacon, the stem part of molecular beacon as a primer to initiate the hybridization chain reaction process. Thus, with the electrochemical indicator hemin selectively intercalated into the multiple G-quadruplexes, a significant electrochemical signal drop is observed, which is dependent on the concentration of the target thrombin. Thus, using this"signal-off" mode, label-free homogeneous electrochemical strategy for sensitive thrombin assay with a detection limit of 44 fM is realized. Furthermore, this method also exhibits additional advantages of simplicity and low cost, since both expensive labeling and sophisticated probe immobilization processes are avoided. Its high sensitivity, acceptable accuracy, and satisfactory versatility of analytes led to various applications in bioanalysis.