First stable (Z)-configuration of cyanostilbene derivative: An effective “turn-on“ fluorescent sensor for lysine in aqueous media

The Synergistic Mechanisms of AIE, ESIPT and ICT in the α-cyanostilbene-based Derivative: A Red-fluorescence Probe With a Large Stokes' Shift for Copper (II) Ion Determination and Reversible Response to Amine/acid Vapor

Herein, α-cyanostilbene-based luminogen with an electron donor-π-electron acceptor (D-π-A) architecture was formylated into the salicylaldehyde-analogue luminogen, followed by the Schiff base reaction with phenylamine, a red-emitting luminogen was elaborately designed and successfully synthesized in a high yield of 89%. Its well-defined structure was confirmed by FT-IR, MALDI-TOF-MS, HR-MS and 1H/13C NMR technologies. Based on the synergistic mechanisms of aggregation-induced emission (AIE), excited-state intramolecular proton transfer (ESIPT) and intramolecular charge transfer (ICT), it enjoyed a red-fluorescence emission at 627 nm in THF/water mixtures (fw = 95%) and was used as a probe. Moreover, the TLC-based test strips loaded with the probe not only exhibited the reversible fluorescence response to amine/acid vapor but also showed sensitive and selective fluorescence response towards Cu2+. Furthermore, the fluorescence titration experiment between the probe and Cu2+ in THF/water mixtures (fw = 95%, pH = 7.4) revealed that the detection limit was 1.18 × 10-7 M and the binding constant was 1.59 × 105. Job's plot experiment and HR-MS analysis revealed the 2:1 binding stoichiometry of the probe with Cu2+. The method enabled real-time assessment for Cu2+ in real water samples. This study could offer insightful opinions on the development of long-wavelength emissive luminogens based on α-cyanostilbene.

Near-infrared fluorescent probe with large Stokes shift for specific detection of lysine

A new near-infrared (NIR) fluorescent probe CL based on coumarin- dicyanoisophorone was synthesized. Addition of Lys to probe CL solution in DMF/H2O (9:1, v/v) medium resulted in noticeable enhancement in the intensity of the fluorescence emission at 702 nm, accompanying distinct color change from yellow to pink. While addition of other amino acids and biothiols (Gly, Hcy, GSH, Glu, Val, Tyr, Arg, Trp, Lys, His, Leu, Phe, Asp and Met) did not bring about substantial changes in both fluorescence emission and color. The detection limit was calculated to be 0.51 μM. Job's plot test revealed that probe CL and Lys formed a complex of 1:1 stoichiometry. Probe CL showed high stability and could be used to recognize Lys in a wide pH range of 4.0-10.0. The sensing mechanism was proposed and verified by 1H NMR spectral measurement. The dual-modal fluorescence turn-on and colorimetric NIR probe with an extremely large Stokes shift of 280 nm may be utilized for highly specific and practical sensing of Lys.

A color-change fluorescence sensor for oleanolic acid based on chiral camphanic decorated bis-cyanostilbene

Although various fluorescent sensors for biomolecules had been extensively reported, the effective fluorescent sensor was seldom reported for detecting oleanolic acid up to now. This work reports the first color-change fluorescence sensor for oleanolic acid based on a bridging bis-cyanostilbene derivative with chiral camphanic groups (C-BCS). C-BCS possessed the chartreuse fluorescence in aqueous media, which transferred to strong blue fluorescence in the presence of oleanolic acid. This sensing ability of C-BCS for oleanolic acid exhibited the high selectivity among all kinds of biomolecules and ions. The good linearity between the fluorescence intensity and concentration of oleanolic acid was acquired in the range of 0.2 × 10^-6 to 8.0 × 10^-6 M with the detecting limitation of 0.0582 μM. The 1:1 binding process was clarified as oleanolic acid located in the opening cavity composed of two bridging cyanostilbene units and two chiral camphanic groups based on multiple hydrogen bonds and hydrophobic interaction. The detecting ability of C-BCS was applied on sensing oleanolic acid in thin-layer chromatography analysis, imprinting experiment, tap water, and tea samples, suggesting the effective on-site sensing abilities of C-BCS for oleanolic acid in real samples and daily life.

Ligand as Buffer for Improving Chemical Stability of Coordination Polymers

Chemical stability is one of the key concerns in coordination polymers (CPs). However, technologies to protect CPs against acidic or alkaline aqueous environments have yet to be implemented. Herein we demonstrate an approach for improving the pH stability by utilizing the ligand salt as buffering site to modify the unsaturated coordination sites of CPs. For the selective one-dimensional CP Eu-d-DBTA (d-H₂DBTA = d-O,O'-dibenzoyltartaric acid) with a pH stability range of 6-8, the introduction of the ligand salt Na-d-DBTA extends the pH stability interval from 3 to 11. Crystallographic structure data reveal the formation of a Eu/Na-d-DBTA dynamic structure with Na-d-DBTA buffer sites on the Eu-O cluster of the Eu-d-DBTA skeleton. Benefiting from the dynamic single-crystal-to-single-crystal transformation, the buffer sites protect the skeleton from the impact of the acidic or alkaline aqueous environment. In addition, Eu/Na-d-DBTA produces stable photoluminescence properties and selective responses toward l-tryptophan (l-Trp) and further toward l-lysine (l-Lys) over the whole buffer capacity range of 3-11. Noticeably, other Ln/Na-d-DBTA CPs and star metal-organic frameworks also exhibit pH stability improvement when the ligand-as-buffer technology is used, which is significant for developing advanced inorganic-organic hybrid materials with superior functionality.

An effective long-wavelength fluorescent sensor for Cu2+ based on dibenzylidenehydrazine-bridged biphenylacrylonitrile

Although numerous fluorescence sensors for Cu²⁺ have been presented, a long-wavelength sensor in aqueous media has rarely been reported as expected due to practical application requirements. In this work, a novel AIE molecule (DHBB) containing two biphenylacrylonitrile units bridged by dibenzylidenehydrazine was prepared. It possessed the merits of long-wavelength emission, good emission in aqueous media, and multiple functional groups for binding Cu²⁺. It exhibited good sensing selectivity for Cu²⁺ among all kinds of tested metal ions. The detection limit was as low as 1.08 × 10^-7 M. The sensing mechanism was clarified as 1:1 stoichiometric ratio based on the binding cooperation of O and N functional groups of DHBB. The selective sensing ability for Cu²⁺ remained stable at pH = 5-9 and was influenced little by other metal ions. The Cu²⁺ sensing ability of DHBB was applied in real samples with 96% recovery rate. The bio-imaging experiment of living cells suggested that DHBB possessed not only good bio-imaging performance but also sensing ability for Cu²⁺ in living environments. This work suggested the good application prospect of DHBB to sense Cu²⁺ in real samples and living environment.

A New Pyrroloquinoline-Derivative-Based Fluorescent Probe for the Selective Detection and Cell Imaging of Lysine

In this paper, a new pyrroloquinoline-derivative-based fluorescent probe, PQP-1, was prepared for the selective detection of Lys in living cells and natural mineral water for drinking. PQP-1 exhibited high selectivity, low limit of detection, and a wide pH range. PQP-1 could be successfully applied for imaging Lys in living cells and in natural mineral water for drinking. We expect that PQP-1 will expand the detection reaction mechanism and the practical biological applications of Lys.

An effective dual sensor for Cu2+ and Zn2+ with long-wavelength fluorescence in aqueous media based on biphenylacrylonitrile Schiff-base

Although some sensors for Cu²⁺ and Zn²⁺ had been reported, the sensor with long-wavelength emission in aqueous media for in-situ detecting Cu²⁺ and Zn²⁺ was always expected. Herein, a biphenylacrylonitrile Schiff-base (OPBS) with large aromatic conjugated system was designed and synthesized in yield of 82%. OPBS possessed excellent long-wavelength fluorescence at 550-750 nm in aqueous media, which selectively response to sense Cu²⁺ with quenched fluorescence and Zn²⁺ with chromotropic fluorescence from red to yellow. The detection of Cu²⁺ and Zn²⁺ were realized without mutual interference in their coexistence system by means of the assistance of ATP. The detection limits were 2.3 × 10^-7 M for Cu²⁺ and 1.8 × 10^-6 M for Zn²⁺, respectively. The sensing mechanism was elucidated by binding MS spectra, fluorescence Job's plot and ¹H NMR spectra. Moreover, OPBS exhibited good bioimaging performance and the in-situ sensing abilities for Cu²⁺ and Zn²⁺ in living cells, suggesting the application potential for detecting Cu²⁺ and Zn²⁺ in both vitro assay and vivo environment.

Facile and Sensitive Detection of Nitrogen-Containing Organic Bases with Near Infrared C-Dots Derived Assays

In this article, we have designed both colorimetric (including solution and test paper type) and spectral sensors (including UV-vis and PL type) for the quick and sensitive detection of general nitrogen-containing organic bases (NCOBs); the limit of detection could reach as low as 0.50 nM. NCOBs included 11 examples, covering aliphatic and aromatic amines, five- and six-membered heterocyclics, fused-ring heterocyclics, amino acids, and antibiotics. Furthermore, the assays demonstrated high reliability in sensing NCOBs and excellent ability to distinguish NCOBs from oxygen and sulfur containing organics. The assays developed could find important applications for the detection of NCOBs in the fields of biomedicine, chemistry, and agriculture.