Multi-responsive luminescent sensors of two water-stable polynuclear Cd organic frameworks: Synthesis, structures and sensing of tetracycline, Cr2O72− and Fe3+ ions in water

A Zn-coordination polymer for the quantitative and selective colorimetric detection of residual tetracycline in aqueous solution and urine

A one-step solvothermal synthesis provides a functional crystalline one-dimensional Zn-coordination polymer (Zn-CP) with excellent stability in aqueous solution over a wide range of temperature and pH. Zn-CP is a rapid, highly sensitive and selective sensor for detecting tetracycline (TC). Quantitative TC detection is based on the ratio of fluorescence intensities I₅₃₀/I₄₂₀, with a limit of detection (LOD) of 5.51 nM in aqueous solution and 47.17 nM in human urine. The characteristics of colorimetric TC sensing by Zn-CP are highly favorable for application because the color of Zn-CP changes in the visible part of the spectrum from blue-purple to yellow-green upon addition of TC. Conversion of these colors into an RGB signal is simply achieved with an app for the smart phone and provides LODs of 8.04 nM and 0.13 μM TC in water and urine, respectively. Our suggested sensing mechanisms assume that the fluorescence intensity of Zn-CP@TC at 530 nm is enhanced by energy transfer of Zn-CP to TC, while the fluorescence of Zn-CP at 420 nm is quenched by photoinduced electron transfer (PET) from TC to the organic ligand in Zn-CP. These fluorescence properties make Zn-CP a convenient, low-cost, rapid and green detection device for monitoring TC under physiological conditions and in aqueous media.

Multiplex Detection of Antibiotic Residues in Milk: Application of MCR-ALS on Excitation-Emission Matrix Fluorescence (EEMF) Data Sets

The presence of antibiotics and their metabolites in milk and dairy products is a serious concern because of their harmful effects on human health. In the current study, a novel synergistic bimetallic nanocluster with gold and silver as an emission fluorescence probe was investigated for the simultaneous determination of tetracycline (TC), ampicillin (AMP), and sulfacetamide (SAC) antibiotics in the milk samples using excitation-emission matrix fluorescence (EEMF) spectroscopy. The multivariate curve resolution-alternating least squares (MCR-ALS) method was implemented to analyze augmented EEMF data sets to quantify the multicomponent systems in the presence of interferences with considerable spectral overlap. A pseudo-univariate calibration curve of the resolved emission spectra intensity against the concentration of the mentioned antibiotics was linear in the range of 5-5000 ng mL^-1 for AMP and 50-5000 ng mL^-1 for TC and SAC. The calculated values of the limit of detection ranged between 1.4 and 14.6 ng mL^-1 with a relative standard deviation (RSD) of less than 4.9%. The obtained results show that the EEMF/MCR-ALS methodology using an emission fluorescence probe is a powerful tool for the simultaneous quantification of TC, AMP, and SAC in complex matrices with highly overlapped spectra.

Mitochondria-targeted acridine-based dual-channel fluorescence chemosensor for detection of Sn4+ and Cr2O72- ions in water and its application in discriminative detection of cancer cells

The goal of the present work was to fabricate a new low-cost, easy-to-prepare, dual-channel fluorescence chemosensor comprised of acridine-diphenylacetyl moieties (NDA) to enable remarkable Sn⁴⁺ detection in water and biological medium. The resulting NDA-Sn⁴⁺ complex was utilized for the distinguished identification of Cr₂O₇^2- ions from other anions and biomolecules. These investigations involve the absorption, fluorescence, and electrochemical methods for the detection of Sn⁴⁺ and Cr₂O₇^2- ions in pure water. The mechanism for NDA-mediated Sn⁴⁺ detection was experimentally determined by FT-IR, NMR titrations, mass (ESI) analyses, and DFT calculations. The obtained results indicate that the NDA chemosensor possessed excellent performance characteristics including good water solubility and compatibility, quick response time (less than 10 s), high sensitivity (Sn⁴⁺ = 0.268 μM and Cr₂O₇^2- = 0.160 μM), and selectivity against coexisting metals, anions, amino acids, and peptides. The chemosensor NDA induced negligible toxicity in live cells and was successfully utilized as a biomarker for the tracking of Sn⁴⁺ in human normal and cancer cells. More importantly, NDA demonstrates distinguished recognition of Sn⁴⁺ in human cancer cells rather than in normal live cells. Additionally, NDA was shown to act as a mitochondria-targeted probe in FaDu cells.

High efficiency photocatalytic degradation of Ambroxol over Mn doped TiO2: Experimental designs, identification of transformation products, mineralization and mechanism

Ambroxol (AMB) is a drug commonly used for chronic bronchitis prevention. Once released in surface water, this recalcitrant chemical becomes a hazardous pollutant. Here, we investigated the ability of 1% Mn-doped TiO₂ (Mn-TiO₂) to mineralize AMB by photocatalysis. We studied the morphology, and the physical and electrochemical properties of Mn-TiO₂ using X-ray diffraction, Scanning electron microscopy, Transmission electron microscopy, X-ray fluorescence, BET method, UV-visible, and electrochemical study and optimized the AMB degrading experimental conditions through response surface methodology (RSM). Mn-TiO₂ at the dose of 0.625 g·L^-1 allowed the complete photodegradation of AMB (30 ppm) at pH 7 under UVA light irradiation for 30 min while total mineralization in CO₂ (>96%) was achieved after 24 h of irradiation. Mn-TiO₂ was 1.6-time more efficient than TiO₂ Degussa P25. Product studies were also carried out by liquid chromatography coupled to electrospray high resolution mass spectrometry. Twenty-one photodegradation products were detected and identified. In addition, ionic chromatography analyses revealed the release of Br^-, NH₄⁺, and NO₃^- at respectively 97, 63 and 35% of the total Br, and N initially present in AMB. Finally, the reusability of the photocatalyst was also tested. After four cycles, the almost complete photodegradation of AMB was achieved showing that Mn-TiO₂ was highly stable. This work brings new physical characteristics on Mn-TiO₂ photocatalyst. Moreover, it is the first study investigating the photocatalytic degradation of recalcitrant AMB drug.

Structural Design of Low Toxicity Metal-Organic Frameworks for Multifunction Detection of Organic and Inorganic Contaminants from Water

Metal-organic frameworks (MOFs)-based sensors for monitoring toxic substances in wastewater have attracted great attention due to the efficient and reliable performance. Here, we has synthesized two novel zinc-based MOFs [Zn(ttb)₂(H₂O)₂]_n (Zn1-ttb) and {[Zn(ttb)₂]·0.5CH₃CN}_n (Zn2-ttb) through changing the polarity of reaction solvents and finally obtained target 2D MOF material [Zn(ttb)(bdc)_0.5]_n(Zn3-ttb-bdc) by successfully introducing an ancillary ligand H₂bdc (Httb = 1-(triazo-1-ly)-4-(tetrazol-5-ylmethyl)benzene, H₂bdc = 1,4-benzenedicarboxylic acid). As-prepared Zn3-ttb-bdc exhibits high water and chemical stability as well as excellent fluorescence property. Due to the -COOH binding sites from H₂bdc, Zn3-ttb-bdc shows high sensitivity and a rapid luminescent response to a representative organic micropollutant trinitrophenol (TNP) and inorganic pollutants (Fe³⁺ and Cr₂O₇^2-) in wastewater. The mechanisms of multifunctional detection abilities of Zn3-ttb-bdc toward different types of pollutants are further studied. This work presents the structural design in preparing MOF materials for multifunctional detection performance, thus opening new perspectives for emerging MOF-based sensors as environmental monitors.