A rapid and sensitive stability-indicating green RP-HPTLC method for the quantitation of flibanserin compared to green NP-HPTLC method: Validation studies and greenness assessment

A Simple, Sensitive, and Greener HPLC-DAD Method for the Simultaneous Analysis of Two Novel Orexin Receptor Antagonists

The orexin receptor antagonist (ORA) is one of the new psychopharmacological agents used in the treatment of insomnia. There are currently no documented greener high-performance liquid chromatography-diode array detector (HPLC-DAD) methods for the analysis of ORA antagonists, lemborexant (LMB) and suvorexant (SUV) simultaneously. Therefore, in this study, a simple, sensitive, and greener HPLC-DAD method has been developed for the simultaneous quantitative analysis of LMB and SUV in bulk and laboratory-prepared mixture. The developed method was validated for numerous validation parameters and evaluated for greenness. The C18 Waters Spherisorb CN (4.6 × 250 mm2; 5 μm) column was used for the chromatographic separation. The mobile phase composition was ethanol: 10 mM KH2PO4 buffer in a ratio of (60:40 v/v). The DAD detection was performed at 253 nm using a Waters DAD detector. The greenness was evaluated using the analytical Eco-Scale (AES), ChlorTox, and analytical GREEnness (AGREE) techniques. The calibration curves showed excellent linearity for LMB and SUV between the concentration range of 125-5000 ng/mL and 250-10,000 ng/mL, respectively. In addition, the proposed HPLC-DAD method was accurate, precise, robust, highly sensitive, and greener. AES, ChlorTox, and AGREE scales were predicted by the HPLC-DAD method to be 91, 1.14 g, and 0.79, respectively, showing an excellent greenness profile. The greener HPLC-DAD method was successfully used to analyze both medicines quantitatively in bulk and laboratory-prepared synthetic mixtures. The findings of this study indicated that the proposed HPLC-DAD method may be consistently applied to evaluate LMB and SUV in bulk and dosage forms.

Comparing the Greenness and Validation Metrics of Traditional and Eco-Friendly Stability-Indicating HPTLC Methods for Ertugliflozin Determination

The literature does not provide any "high-performance thin-layer chromatographic (HPTLC)" techniques for the determination of a novel antidiabetic medicine, ertugliflozin (ERZ). Additionally, there are not many environmentally friendly analytical methods for ERZ measurement in the literature. A rapid, sensitive, and eco-friendly reversed-phase-HPTLC (RP-HPTLC) method was designed and validated in an attempt to analyze ERZ in marketed pharmaceutical tablets more precisely, accurately, and sustainably over the traditional normal-phase HPTLC (NP-HPTLC) method. The stationary phases used in the NP- and RP-HPTLC procedures were silica gel 60 NP-18F254S and 60 RP-18F254S plates, respectively. For NP-HPTLC, a chloroform/methanol (85:15 v/v) mobile phase was used. However, ethanol-water (80:20 v/v) was the preferred method for RP-HPTLC. Four distinct methodologies, including the National Environmental Method Index (NEMI), Analytical Eco-Scale (AES), ChlorTox, and Analytical GREEnness (AGREE) approaches, were used to evaluate the greenness of both procedures. For both approaches, ERZ detection was carried out at 199 nm. Using the NP- and RP-HPTLC techniques, the ERZ measurement was linear in the 50-600 and 25-1200 ng/band ranges. The RP-HPTLC method was found to be more robust, accurate, precise, linear, sensitive, and eco-friendly compared to the NP-HPTLC approach. The results of four greenness tools demonstrated that the RP strategy was greener than the NP strategy and all other reported HPLC techniques. The fact that both techniques can assess ERZ when its degradation products are present implies that they both have characteristics that point to stability-indicating features. 87.41 and 99.28%, respectively, were the assay results for ERZ in commercial tablets when utilizing the NP and RP procedures. Based on several validation and greenness metrics, it was determined that the RP-HPTLC approach was better than the NP-HPTLC method. As a result, it is possible to determine ERZ in pharmaceutical products using the RP-HPTLC approach.

Zirconium-based hydrophobic-MOFs as innovative electrode modifiers for flibanserin determination: Exploring the electrooxidation mechanism using a comprehensive spectroelectrochemical study

Three different types of Zr-based MOFs derived from benzene dicarboxylic acid (BDC) and naphthalene dicarboxylic acid as organic linkers (ZrBDC, 2,6-ZrNDC, and 1,4-ZrNDC) were synthesized. They were characterized using X-ray diffraction analysis (XRD), X-ray photoelectron spectroscopy (XPS), Fourier-transform IR spectroscopy (FT-IR), and Transmission electron microscopy (TEM). Their hydrophilic/hydrophobic nature was investigated via contact angle measurements; ZrBDC MOF was hydrophilic and the other two (ZrNDC) MOFs were hydrophobic. The three MOFs were combined with MWCNTs as electrode modifiers for the determination of a hydrophobic analyte, flibanserin (FLB), as a proof-of-concept analyte. Under the optimized experimental conditions, a significant enhancement in the oxidation peak current of FLB was observed when utilizing 2,6-ZrNDC and 1,4-ZrNDC, being the highest when using 1,4-ZrNDC. Furthermore, a thorough investigation of the complex oxidation pathway of FLB was performed by carrying out simultaneous spectroelectrochemical measurements. Based on the obtained results, it was verified that the piperazine moiety of FLB is the primary site for electrochemical oxidation. The fabricated sensor based on 1,4-ZrNDC/MW/CPE showed an oxidation peak of FLB at 0.8 V vs Ag/AgCl. Moreover, it showed excellent linearity for the determination of FLB in the range 0.05 to 0.80 μmol L-1 with a correlation coefficient (r) = 0.9973 and limit of detection of 3.0 nmol L-1. The applicability of the developed approach was demonstrated by determination of FLB in pharmaceutical tablets and human urine samples with acceptable repeatability (% RSD values were below 1.9% and 2.1%, respectively) and reasonable recovery values (ranged between 97 and 103% for pharmaceutical tablets and between 96 and 102% for human urine samples). The outcomes of the suggested methodology can be utilized for the determination of other hydrophobic compounds of pharmaceutical or biological interest with the aim of achieving low detection limits of these compounds in various matrices.

Eco-Friendly High-Performance Thin-Layer Chromatography Method for the Determination of Tenoxicam in Commercial Formulations

There is a dearth of information in the literature regarding environmentally benign high-performance thin-layer chromatography (HPTLC) methods to determine tenoxicam (TNX). Therefore, designing and validating an HPTLC method to detect TNX in commercial tablets and capsules was the goal of this investigation. The green mobile phase utilized was the combination of ethanol/water/ammonia solution (50:45:5 v/v/v). The TNX was quantified at a wavelength of 375 nm. The proposed method's greenness profile was established using the Analytical GREEnness (AGREE) approach. The proposed methodology for determining TNX was linear in the range of 25-1400 ng/band. The proposed methodology for measuring TNX was accurate (% recoveries = 98.24-101.48), precise (% RSD = 0.87-1.02), robust (% RSD = 0.87-0.94), sensitive (LOD = 0.98 ng/band and LOQ = 2.94 ng/band), and environmentally friendly. The AGREE scale for the present methodology was derived to be 0.75, indicating an outstanding greenness profile. TNX was found to be highly stable under acidic, base, and thermal stress conditions. However, it completely decomposed under oxidative stress conditions. Commercial tablets and capsules were found to have 98.46 and 101.24% TNX, respectively. This finding supports the validity of the current methodology for measuring TNX in commercial formulations. The outcomes of this work showed that the proposed eco-friendly HPTLC methodology can be used for the routine analysis of TNX in commercial formulations.

A Different Perspective on the Characterization of a New Degradation Product of Flibanserin With HPLC-DAD-ESI-IT-TOF-MSn and Its Pharmaceutical Formulation Analysis With Inter-Laboratory Comparison

BACKGROUND

Flibanserin (FLB) was first synthesized as an antidepressant drug; however, due to its enhancing effects on sexual activity, it was approved for treatment of hypoactive sexual desire disorder in women in 2015.

OBJECTIVE

The aim of this study was to develop a new and fully validated HPLC method for analysis of FLB in pharmaceutical formulations besides its degradation products, and identification of possible formation mechanisms by using HPLC-DAD-ESI-IT-TOF-MSn.

METHOD

The HPLC separation was achieved in a Supelco Ascentis® Express series phenyl hexyl column (100 × 4.6 mm, ID 2.7 µm). The mobile phase was acetonitrile-ammonium acetate solution (50:50, v/v, 10 mM, pH 5.4) mixture, which was pumped at the rate of 0.5 mL/min. Chromatography, detection, and structural identification was performed by using a LCMS-IT-TOF instrument (Shimadzu, Japan).

RESULTS

1-(2-(4-(3-hydroxy-5-(trifluoromethyl)phenyl)piperazine-1-yl)ethyl)-1,3-dihydro-2H-benzo[d]imidazol-2-one is proposed as a novel degradation product, with a mass of 407.1695 and a formula of C20H21F3N4O2 with a margin of error about 0.001 ppm. The developed method is applicable with 98% accuracy within the 2.5-50.0 µg/mL range. The LOD and LOQ were about 500 ng/mL and 1.50 µg/mL, respectively. The transferability and variation between laboratories were tested by inter-laboratory comparison and evaluated with one-way analysis of variance.

CONCLUSIONS

A novel FLB degradation product, which was produced under oxidative forced degradation conditions was observed and identified for the first time; in addition, the formation kinetics of the degradation product besides decomposition of FLB was studied. Furthermore, an inter-laboratory comparison was carried out, and application of the proposed method on a pseudo Addyi® (Sprout Pharmaceuticals, Inc.) sample was tested using both instrument configurations.

HIGHLIGHTS

A novel stability-indicating assay method was developed and fully validated according to the International Council on Harmonization (Q2) R1 for the analysis of FLB in the pharmaceutical preparations. A new degradation product was identified in the oxidative forced degradation condition and characterized using HPLC-DAD-ESI-IT-TOF-MS3. Moreover, the possible mechanism and the formation kinetic of the degradation product were revealed. In addition, the developed method was transferred to another LC-PDA instrument for inter-laboratory comparison. Finally, the current method was applied to a pseudo formulation of Addy in both instruments, and ANOVA was applied for evaluation.

Quantification of Pomalidomide Using Conventional and Eco-Friendly Stability-Indicating HPTLC Assays: A Contrast of Validation Parameters

High-performance thin-layer chromatographic (HPTLC) assays for pomalidomide (PMD) measurement are lacking in the published database. Furthermore, eco-friendly stability-indicating analytical assays for PMD measurement are also lacking in the published database. In order to detect PMD in commercial products more accurately and sustainably than the conventional normal-phase HPTLC (NP-HPTLC) assay, an effort was made to design and verify a sensitive and eco-friendly reversed-phase HPTLC (RP-HPTLC) assay. The silica gel 60 NP-18F254S and 60 RP-18F254S plates were used as the stationary phases for NP-HPTLC and RP-HPTLC methods, respectively. The solvent system for NP-HPTLC was chloroform-methanol (90:10 v/v). However, the solvent system for RP-HPTLC was ethanol-water (75:25 v/v). The greenness scores for both assays were measured by AGREE approach. PMD measurement was performed for both assays at 372 nm. In the 50-600 and 20-1000 ng/band ranges, the NP-HPTLC and RP-HPTLC methods were linear for PMD measurement. The RP-HPTLC assay was superior to the NP-HPTLC method for measuring PMD in terms of sensitivity, accuracy, precision, and robustness. The ability of both methods to identify PMD in the presence of its degradation products suggests that both methods have stability-indicating features. When employing the NP-HPTLC and RP-HPTLC assays, respectively, the assay for PMD in commercial capsules was 88.68 and 98.83%. The AGREE scores for NP-HPTLC and RP-HPTLC assays were calculated to be 0.44 and 0.82, respectively, suggesting an outstanding greenness characteristic of the RP-HPTLC method than the NP-HPTLC method. The RP-HPTLC method was found to be superior to the NP-HPTLC method based on these findings. Therefore, the RP-HPTLC method could be successfully applied for the determination of PMD in pharmaceutical products.

Environmentally friendly stability-indicating HPLC method for the determination of isotretinoin in commercial products and solubility samples

In this study, an environmentally friendly "high-performance liquid chromatography (HPLC)" assay to quantify isotretinoin (ITN) in commercial products and solubility samples is designed and verified. A Nucleodur reverse-phase C18 column was used as the stationary phase to identify ITN. The ecologically friendly mobile phase was composed of ethyl acetate and ethanol (50:50 v/v), and it was delivered at a flow rate of 1.0 mL/min. ITN was measured at 354 nm in wavelength. The current HPLC method had a determination coefficient of 0.9994 and was linear in the 0.2-80 μg/g range. The current protocol for ITN measurement was also rapid (retention time = 2.78 min), accurate (%recoveries = 98.60-101.52), precise (% uncertainties = 0.71-0.98), and sensitive. According to the AGREE methodology, the current procedure received an outstanding greenness profile with an AGREE score of 0.76. By determining ITN in commercial products and solubility samples, the applicability of the current approach was proven. ITN was discovered to be present in 98.43% and 100.84%, respectively, of commercial capsule brands A and B. The ITN's solubility in numerous eco-friendly solvents was successfully measured. Under different stress conditions, the current approach was able to distinguish between its degradation products, demonstrating its stability-indicating characteristics. These findings indicated that ITN in procured capsules and solubility samples might be regularly tested by the suggested approach.

A Rapid and Sensitive Stability-Indicating Eco-Friendly HPTLC Assay for Fluorescence Detection of Ergotamine

Eco-friendly liquid chromatographic methods for measuring ergotamine (EGT) are scant in the published database. Accordingly, the goal of the current study was to develop a high-performance thin-layer chromatography (HPTLC) method for fluorescence detection of EGT in commercially available tablets. This approach was based on the application of ethyl alcohol-water (80:20 v/v) as the eco-friendly eluent mixture. The fluorescence detection of EGT was carried out at 322 nm. The greenness score of the present approach was evaluated by "Analytical GREENness (AGREE)" technology. The present approach for measuring EGT in the 25-1000 ng band^-1 range was linear. The present assay for fluorescence detection of EGT was validated successfully by ICH guidelines for various parameters. The method was found to be rapid, sensitive, eco-friendly, and stability-indicating. The computed AGREE index for the current strategy was 0.84, displaying outstanding greenness features. The present methodology successfully separated the EGT degradation products under forced-degradation circumstances, exhibiting its stability-indicating qualities and selectivity. An amount of 99.33% of EGT was found in commercial formulations, indicating the validity of the current method for pharmaceutical analysis of EGT in commercial products. The results showed that EGT in commercial products might be regularly measured by the existing method.

Quality evaluation of different black rice varieties of northeastern region of India

INTRODUCTION

Black rice (Oryza sativa L.), which is rich in polyphenols and flavonoids, is indigenous to Northeast India, specifically Manipur, and traditionally consumed for its protective effects on human health. Due to its economic value, it is crucial to evaluate the quality of different black rice varieties to authenticate their therapeutic and nutritional properties.

OBJECTIVE

We aimed to evaluate the quality of pre- and post-marketed black rice samples by a validated high-performance thin layer chromatography method and determine variations of total phenolics and total flavonoids with antioxidant potential.

MATERIAL AND METHODS

The ferulic acid, gallic acid, quercetin, and caffeic acid contents of three black rice varieties-Poireiton, Amubi, and Sempak-along with two marketed samples of Amubi from Manipur, India, were quantified based on standards. Antioxidant potential was measured by the 2,2-diphenyl-1-picryl-hydrazyl hydrate free radical scavenging assay.

RESULTS

The highest and lowest relative biomarker contents were found in hydroalcoholic extracts of Amubi [caffeic acid (1.43% w/w), ferulic acid (1.15% w/w), quercetin (0.6% w/w), and gallic acid (0.39% w/w)] and the marketed sample Var. Amubi from Kakching District, respectively. Pearson's correlation coefficient of antioxidant potential with phenolic and flavonoid content showed a moderate to strong correlation for all samples.

CONCLUSION

This validated, rapid, accurate standardization method for black rice varieties will be beneficial for the quality evaluation of black rice and its derived products. It will also be helpful to authenticate the nutritional benefits for the consumers.

A Validated, Stability-Indicating, Eco-Friendly HPTLC Method for the Determination of Cinnarizine

The eco-friendly high-performance thin-layer chromatographic (HPTLC) approaches for measuring cinnarizine (CIN) are scant in reported databases. As a result, the current work has developed and validated an eco-friendly HPTLC technique for assessing CIN in commercial formulations. The proposed approach was based the use of ethyl alcohol-water (90:10 v/v) as the eco-friendly mobile phase. A wavelength of 197 nm was used to detect CIN. The greenness score of the current approach was measured using the Analytical GREENness (AGREE) approach. The current approach was linear for CIN measurement in 50–800 ng band−1 range. The current approach for CIN measurement was validated successfully using ICH guidelines and was found to be linear, accurate (% recovery = 99.07–101.29%), precise (% CV = 0.80–0.95%), robust, sensitive (LOD = 16.81 ng band−1 and LOQ = 50.43 ng band−1), specific, selective, stability-indicating, and eco-friendly. The AGREE score for the current approach was calculated to be 0.80, showing an excellent greenness characteristic of the present approach. Under forced degradation conditions, the current approach was successful in separating the CIN degradation product, demonstrating the stability-indicating qualities/selectivity of the present approach. The % assay of CIN in commercial tablet brands A and B was found to be 98.64 and 101.22%, respectively, suggesting the reliability of the present approach in the pharmaceutical analysis of CIN in commercial dosage forms. The obtained findings indicated that CIN in commercial formulations could be routinely determined using the current approach.

Greener Stability-Indicating HPLC Approach for the Determination of Curcumin in In-House Developed Nanoemulsion and Curcuma longa L. Extract

Despite the fact that several analytical methodologies have been reported for the determination of curcumin (CCM) in a wide range of sample matrices, the greener liquid chromatographic approaches to determine CCM are scarce in the literature. Therefore, this research is designed to develop and validate a greener stability-indicating “high-performance liquid chromatography (HPLC)” methodology to determine CCM in an in-house developed nanoemulsion, Curcuma longa L. extract, and commercial tablets. CCM was measured on a Nucleodur (150 mm × 4.6 mm) RP C18 column with 5 µm-sized particles. Ethanol and ethyl acetate (83:17 v/v) made up the greener eluent system, which was pumped at a flow speed of 1.0 mL/min. At a wavelength of 425 nm, CCM was detected. The greener HPLC methodology was linear in the 1–100 µg/mL range, with a determination coefficient of 0.9983. The greener HPLC methodology for CCM estimation was also rapid (Rt = 3.57 min), accurate (%recoveries = 98.90–101.85), precise (%CV = 0.90–1.11), and sensitive (LOD = 0.39 µg/mL and LOQ = 1.17 µg/mL). The AGREE approach predicted the AGREE score of 0.81 for the established HPLC technique, indicating an outstanding greenness profile. The utility of the greener HPLC methodology was demonstrated by determining CCM in the in-house developed nanoemulsion, Curcuma longa extract, and commercial tablets. The % amount of CCM in the in-house developed nanoemulsion, Curcuma longa extract, and commercial tablets was found to be 101.24%, 81.15%, and 78.41%, respectively. The greener HPLC methodology was able to detect its degradation product under various stress conditions, suggesting its stability-indication characteristics. These results suggested that CCM in developed nanoemulsion, plant extract samples, and commercial tablets may be routinely determined using the greener HPLC methodology.

Ecofriendly appraisal of stability-indicating high-performance chromatographic assay of canagliflozin and metformin with their toxic impurities; in silico toxicity prediction

Canagliflozin is an oral hypoglycemic drug recently formulated in combination with a biguanide, metformin hydrochloride, for improving its hypoglycemic action. Canagliflozin has one reported major degradation product, also metformin hydrochloride has one reported major degradation product, cyanoguanidine, and has a potential toxic impurity, melamine, that is reported to cause crystalluria that causes chronic kidney inflammation and nephrolithiasis leading to a renal failure. As per International Conference of Harmonization guidelines; a drug degradation product is classified as a type of drug impurities. Toxicity profiles of canagliflozin and metformin major degradation products were studied where in silico data disclosed toxicity too; the development of a specific chromatographic thin layer chromatographic assay was a must for quantification of such toxic related components along with the drugs in laboratory-prepared mixtures as a superior study. The proposed method was validated as per the International Conference of Harmonization and applied for the assay of Vokanamet tablets. The separation was achieved using acetone:ethyl acetate:acetic acid (8:2:0.2, by volume) as scanning eluted bands at 205 nm. For minimal environmental impact; greenness profile appraisal of the proposed assay was performed by three greenness assessment approaches; analytical Eco-Scale, Green Analytical Procedure Index, and Greenness metric approaches.

Simultaneous Detection of Chlorzoxazone and Paracetamol Using a Greener Reverse-Phase HPTLC-UV Method

In the literature, greener/eco-friendly analytical techniques for simultaneous estimation of chlorzoxazone (CZN) and paracetamol (PCT) are scarce. As a consequence, greener reverse-phase high-performance thin-layer chromatography with ultraviolet (HPTLC-UV) detection was developed and validated for simultaneous estimation of CZN and PCT in commercial capsules and tablets. The greenness of the proposed HPTLC-UV technique was assessed quantitatively by utilizing the “Analytical GREENness (AGREE)” methodology. For simultaneous estimation of CZN and PCT, the greener HPTLC-UV technique was linear in the 40–1600 ng band−1 and 30–1600 ng band−1 ranges, respectively. Furthermore, the suggested HPTLC-UV methodology proved sensitive, accurate, precise, and robust for simultaneous detection of CZN and PCT. The assay of CZN in marketed capsules and tablets was found to be 99.01 ± 1.53 and 100.87 ± 1.61%, respectively, using the suggested HPTLC-UV method. The assay of PCT in commercial capsules and tablets was found to be 98.31 ± 1.38 and 101.21 ± 1.67%, respectively. The AGREE index for the greener HPTLC-UV technique was found to be 0.79, suggesting an excellent greenness profile for the proposed HPTLC-UV technique. These results and data suggested the suitability of the greener HPTLC-UV methodology for simultaneous estimation of CZN and PCT in commercial formulations.

Comparison of Validation Parameters for the Determination of Vitamin D3 in Commercial Pharmaceutical Products Using Traditional and Greener HPTLC Methods

Several analytical methods are documented for the estimation of vitamin D3 (VD3) in pharmaceuticals, food supplements, nutritional supplements, and biological samples. However, greener analytical methods for VD3 analysis are scarce in the literature. As a consequence, attempts were made to design and validate a greener “high-performance thin-layer chromatography (HPTLC)” method for VD3 estimation in commercial pharmaceutical products, as compared to the traditional HPTLC method. The greenness indices of both approaches were predicted by utilizing the “Analytical GREENness (AGREE)” method. Both traditional and greener analytical methods were linear for VD3 estimation in the 50–600 ng band−1 and 25–1200 ng band−1 ranges, respectively. The greener HPTLC strategy outperformed the traditional HPTLC strategy for VD3 estimation in terms of sensitivity, accuracy, precision, and robustness. For VD3 estimation in commercial tablets A–D, the greener analytical strategy was better in terms of VD3 assay over the traditional analytical strategy. The AGREE index of the traditional and greener analytical strategies was estimated to be 0.47 and 0.87, respectively. The AGREE analytical outcomes suggested that the greener analytical strategy had a superior greener profile to the traditional analytical strategy. The greener HPTLC strategy was regarded as superior to the traditional HPTLC methodology based on a variety of validation factors and pharmaceutical assays.

Emphasis on the incorporation of Tropaeolin OO dye and silver nanoparticles for voltammetric estimation of flibanserin in bulk form, tablets and human plasma

A novel electrochemical sensor based on the electro-deposition of silver nanoparticles (AgNPs) on Tropaeolin OO (poly-TO) layers over pencil graphite electrode (PGE) surface was fabricated for the first time for voltammetric determination of flibanserin (FBS); a drug enhances female sexual performance. Further characterization studies using cyclic voltammetry (CV), square wave voltammetry (SWV), electrochemical impedance spectroscopy (EIS) and scanning electron microscopy (SEM) were conducted. The AgNPs synergistic effect on poly-TO layers facilitates the FBS electro-oxidation in phosphate buffer solution (pH 6.0) and its determination in bulk form, tablets and in human plasma. Following ICH guidelines, validation of the proposed SWV method for FBS analysis was successfully achieved using the fabricated sensor (AgNPs@poly-TO/PGE). Under the optimal instrumental and experimental conditions, the anodic oxidation peak current was directly proportional to FBS concentration in the range from 0.1 to 8.5 μmol L^-1 with low detection and quantitation limits (0.0286 and 0.0867 μmol L^-1, respectively). High sensitivity, selectivity as well as easiness of fabrication are the main advantages of the modified sensor.

Determination of Colchicine in Pharmaceutical Formulations, Traditional Extracts, and Ultrasonication-Based Extracts of Colchicum autumnale Pleniflorum (L.) Using Regular and Greener HPTLC Approaches: A Comparative Evaluation of Validation Parameters

In the literature, there is a scarcity of greener analytical approaches for colchicine (CLH) analysis. As a result, efforts were made in this study to develop and validate a greener reversed-phase high-performance thin-layer chromatography (HPTLC) technique for CLH analysis in traditional extracts (TE) and ultrasonication-based extracts (UBE) of commercial Unani formulations, commercial allopathic formulations, and Colchicum autumnale Pleniflorum (L.) obtained from Egypt and India. This new technique was compared to the regular normal-phase HPTLC method. The greenness profile of both methods was estimated using the Analytical GREENness (AGREE) approach. In the 100–600 and 25–1200 ng/band ranges, regular and greener HPTLC procedures were linear for CLH analysis, respectively. For CLH analysis, the greener HPTLC method was more sensitive, accurate, precise, and robust than the regular HPTLC method. For CLH analysis in TE and UBE of commercial Unani formulations, commercial allopathic formulations, and C. autumnale obtained from Egypt and India, the greener HPTLC method was superior in terms of CLH content compared to the regular HPTLC method. In addition, the UBE procedure was superior to the TE procedure for both methods. The AGREE scores for regular and greener reversed-phase HPTLC methods were found to be 0.46 and 0.75, respectively. The AGREE results showed excellent greener profile of the greener HPTLC method over the regular HPTLC technique. Based on several validation criteria and pharmaceutical assay findings, the greener HPTLC method is regarded as superior to the regular HPTLC approach.

Simultaneous Estimation of Rhein and Aloe-Emodin in Traditional and Ultrasound-Based Extracts of Rheum palmatum L. (Rhubarb) Using Sustainable Reverse-Phase and Conventional Normal-Phase HPTLC Methods

The greenness indices of literature analytical procedures for the simultaneous measurement of rhein and aloe-emodin have not been determined. As a consequence, the first goal of this study was to design and validate a sensitive and sustainable reverse-phase high-performance thin-layer chromatography (HPTLC) method for the simultaneous estimation of rhein and aloe-emodin in a traditional extract (TE) and ultrasound-based extract (UBE) of commercial Rhubarb and Rhubarb plant extracts in comparison to the conventional normal-phase HPTLC method. The second goal was to determine the greenness indices for both methods using the AGREE approach. For the sustainable reverse-phase HPTLC approach, the method was linear in the 50–1000 ng/spot range for rhein and 25–1000 ng/spot range for aloe-emodin. However, for the conventional normal-phase HPTLC approach, the method was linear in the 50–600 ng/spot range for rhein and 100–600 ng/spot range for aloe-emodin. The limit of detection (LOD) for rhein and aloe-emodin was 16.81 ng/spot and 8.49 ng/spot, respectively, using the sustainable analytical method. However, the LOD for rhein and aloe-emodin was 18.53 ng/spot and 39.42 ng/spot, respectively, using the conventional analytical method. For the simultaneous determination of rhein and aloe-emodin, the sustainable analytical method was more sensitive, accurate, precise, and robust than the conventional analytical method. The amount of rhein and aloe-emodin was higher in the UBE of commercial Rhubarb and Rhubarb plant extract over their TE. For the simultaneous quantification of rhein and aloe-emodin in the TE and UBE of marketed Rhubarb and Rhubarb plant extract, the sustainable analytical method was superior to the conventional analytical method. The AGREE index for the sustainable reverse-phase and conventional normal-phase HPTLC methods was determined to be 0.78 and 0.49, respectively, indicating an excellent greenness profile of the sustainable reverse-phase HPTLC method over the conventional normal-phase HPTLC approach. The sustainable analytical method was found to be superior to the conventional analytical method based on these results.

A Simple, Cost-Effective, and Green HPTLC Method for the Estimation of Ascorbic Acid in Solvent and Ultrasound-Assisted Extracts of Phyllanthus emblica, Capsicum annuum, and Psidium guajava

Greener analytical methodologies for the estimation of ascorbic acid (AA) are poorly reported in the literature. Furthermore, the green indexes of the literature’s analytical assays of AA estimation have not been assessed. As a consequence, the aim of this research is to invent and validate a simple, cost-effective, and green reverse-phase “high-performance thin-layer chromatography (HPTLC)” method for the estimating AA in the solvent extracts (SE) and ultrasound-assisted extracts (UAE) of Phyllanthus emblica, Psidium guajava, and Capsicum annuum. The greener mobile phase for AA estimation was a binary mixture of water and ethanol (70:30, v/v). At a wavelength of 265 nm, the detection of AA was carried out. The greener HPTLC technique was linear in the 25–1200 ng/band range. In addition, the method was simple, cost-effective, accurate, precise, robust, sensitive, and green. The amount of AA was highest in the SE and UAE of P. emblica compared to the SE and UAE of P. guajava and C. annuum. The amount of AA in the SE of P. emblica, P. guajava, and C. annuum was found to be 491.16, 168.91, and 144.30 mg/100 g, respectively. However, the amount of AA in the UAE of P. emblica, P. guajava, and C. annuum was found to be 673.02, 218.71, and 199.30 mg/100 g, respectively. Using the “analytical GREEnness (AGREE)” methodology, the greenness index for the developed method was calculated to be 0.88, showing that the developed method has an excellent green profile. When it came to extracting AA, the UAE method outperformed the SE method. These findings suggested that the developed method might be used to estimate the AA in a variety of vegetable crops, plant-based extracts, and commercial formulations. Furthermore, because of the use of greener solvent systems against the commonly utilized hazardous solvent systems for AA determination, this technique is also safe and sustainable.

A Green High-Performance Thin-Layer Chromatography Method for the Determination of Caffeine in Commercial Energy Drinks and Formulations

The literature on green analytical approaches for caffeine estimation is limited. As a consequence, this study aimed to establish a reverse-phase high-performance thin-layer chromatography (HPTLC) technique for caffeine estimation in a variety of commercial energy drinks (ED) and pharmaceutical formulations that is rapid, sensitive, and green. The combination of ethanol-water (55:45 v v−1) was used as a mobile phase. The detection of caffeine was carried out at 275 nm. The green reverse-phase HPTLC method was linear in the concentration range of 50−800 ng band−1. Furthermore, the developed method for caffeine estimation was simple, quick, economical, accurate, precise, robust, sensitive, and green. The amount of caffeine in different marketed ED (ED1−ED10) was recorded in the range of 21.02−37.52 mg 100 mL−1 using the developed HPTLC method. However, the amount of caffeine in different commercial formulations (F1−F3) was estimated as 10.63−20.30 mg 100 mL−1 using the same method. The “analytical GREEnness (AGREE)” scale for the developed analytical method was predicted to be 0.80, utilizing 12 distinct components of green analytical chemistry, indicating the HPTLC approach’s excellent greener profile. Overall, the developed method for estimating caffeine in marketed ED and dosage forms was found to be reliable.

Determination of Gefitinib Using Routine and Greener Stability-Indicating HPTLC Methods: A Comparative Evaluation of Validation Parameters

“High-performance thin-layer chromatography (HPTLC)” methods for gefitinib (GFT) estimation are scarce in the literature. In addition, greener analytical techniques for GFT estimation are also lacking in the literature. Accordingly, an attempt was undertaken to invent and validate a sensitive and greener normal-phase HPTLC method for GFT analysis in commercial tablets in comparison to the routine normal-phase HPTLC method. The greenness index for both methods was assessed using “Analytical GREENness (AGREE)” methodology. GFT detection was carried out using both methods at 332.0 nm. In the 30–700 ng/band and 20–1400 ng/band ranges, the routine and greener HPTLC assays were linear for GFT estimation. The greener HPTLC method was highly sensitive, more accurate, more precise, and more robust than the routine HPTLC assay for GFT estimation. Both methods were able to detect GFT in the presence of its degradation products, suggesting the stability-indicating property of both methods. The assay of GFT in commercial tablets was 92.45% and 99.74% using the routine and greener HPTLC assays, respectively. The AGREE index for routine and greener analytical assays was predicted to be 0.44 and 0.77, respectively, indicating the excellent greenness index of the greener HPTLC assay over the routine HPTLC assay. The greener HPTLC assay is considered superior to the routine HPTLC assay based on these results.

Development and validation of a novel evaporation setup-assisted TLC method with fluorescence detection for determination of flibanserin in pharmaceutical and biological samples

A specific and sensitive thin layer chromatographic method coupled with fluorescence detection for determination of flibanserin (FLN) that treats woman hypoactive sexual desire disorder was developed. The proposed method depends on the enhancement of FLN native fluorescence intensity via the exposure of the developed TLC plate to concentrated hydrochloric acid vapors. Herein, an evaporation setup needed for HCl vapors exposure step was designed for the first time to ensure a uniform distribution of the vapors throughout the developed bands on the plate. Chloroform: methanol (9.5: 0.5, v/v) was the optimum mobile phase that gave a compact band (R_f= 0.44 ± 0.02) using TLC aluminium plates precoated with silica gel G 60F₂₅₄ as a stationary phase. After exposure of the developed TLC plate to HCl vapors, the FLN bands emission intensities were measured after excitation at 275 nm. Conferring ICH guidelines, the linearity range was 20.0 - 1500.0 ng/band with a good linear relationship (r= 0.9998). Detection and quantitation limits were 5.12 and 15.50 ng/band, respectively. Also, the method was validated for accuracy, precision, robustness, specificity and selectivity. Statistical analysis verified the suitability of the proposed method for estimation of FLN in tablets and in human plasma with acceptable recoveries (98.07-101.45%).

Green NP-HPTLC and green RP-HPTLC methods for the determination of thymoquinone: A contrast of validation parameters and greenness assessment

INTRODUCTION

Thymoquinone (TQ) is a naturally derived bioactive compound with several therapeutic effects.

OBJECTIVE

The highly sensitive, rapid and green normal-phase (NP)/reversed-phase (RP) high-performance thin-layer chromatography (HPTLC) densitometry technique was developed for the determination of TQ in various plant extracts of different geographical regions, commercial capsules, creams and essential oils.

METHODOLOGY

The NP densitometry estimation of TQ was performed using a cyclohexane-ethyl acetate (90:10, v/v) green solvent system, while, the RP-densitometry estimation of TQ was performed using an ethanol-water (80:20, v/v) green solvent system. The estimation of TQ was conducted at 259 nm.

RESULTS

The NP and RP densitometry techniques were observed linear in the range of 25-1000 and 50-600 ng/band, respectively. All validation parameters such as accuracy, precision, robustness and sensitivity of NP/RP densitometry were observed within the limit of regulatory requirements and hence found to be suitable for the determination of TQ. The TQ contents were found to be highest in the Saudi Arabian extract followed by the Syrian extract, Indian extract, commercial capsules, commercial creams, Jordanian extract, Egyptian extract, Palestinian extract and commercial essential oils using NP densitometry. The TQ contents were found in same order using RP densitometry, but they were much lower than those recorded using NP densitometry. The Analytical GREEnness (AGREE) scores of NP and RP densitometry were found to be 0.82 and 0.84, respectively, suggesting an excellent greenness profile.

CONCLUSIONS

Based on these results, NP/RP densitometry was found to be suitable for the pharmaceutical assay of TQ.

A Greener Stability-Indicating High-Performance Thin-Layer Chromatography Approach for the Estimation of Topiramate

Despite various reported analytical methods for topiramate (TPM) analysis, greener analytical approaches are scarce in literature. As a consequence, the objective of the current research is to design a normal-phase stability-indicating high-performance thin-layer chromatography (SI-HPTLC) methodology for TPM analysis in marketed tablet dosage forms that is rapid, sensitive, and greener. TPM was derivatized densitometrically and analyzed at 423 nm in visible mode with anisaldehyde-sulfuric acid as the derivatizing agent. The greener SI-HPTLC technique was linear in the 30–1200 ng band⁻¹ range. In addition, the suggested SI-HPTLC methodology for TPM analysis was simple, rapid, cheaper, precise, robust, sensitive, and environmentally friendly. The greener SI-HPTLC method was able to detect TPM along with its degradation products under acid, base, and oxidative degradation conditions. However, no TPM degradation was recorded under thermal and photolytic stress conditions. TPM contents in commercial tablet dosage forms were recorded as 99.14%. Using 12 different principles of green analytical chemistry, the overall analytical GREEnness (AGREE) score for the greener SI-HPTLC method was calculated to be 0.76, confirming the proposed normal-phase SI-HPTLC method’s good greener nature. Overall, these results demonstrated that the suggested SI-HPTLC technique for TPM measurement in pharmaceutical products was reliable and selective.

Determination of Thymol in Commercial Formulation, Essential Oils, Traditional, and Ultrasound-Based Extracts of Thymus vulgaris and Origanum vulgare Using a Greener HPTLC Approach

In the literature, greener analytical approaches for determining thymol in its commercial formulations, plant-based phytopharmaceuticals, and biological fluids are scarce. As a result, the goal of this study is to develop and validate a normal-phase "high-performance thin-layer chromatography (HPTLC)" method for determining thymol in commercial formulations, essential oils, traditional extracts (TE), and ultrasound-based extracts (UBE) of Thymus vulgaris and Origanum vulgare obtained from various geographical regions. The greener mobile phase for thymol analysis was a binary combination of cyclohexane and ethyl acetate (85:15, v/v). The derivatized densitometric analysis of thymol was carried out under visible mode at 530 nm utilizing anisaldehyde-sulfuric acid as a derivatizing/visualizing agent. In the 10-2000 ng/band range, the greener normal-phase HPTLC method was linear. Furthermore, for thymol analysis, the proposed analytical approach was simple, quick, inexpensive, accurate, precise, robust, sensitive, and greener. The thymol contents in commercial formulation were computed as 7.61% w/w. In general, the thymol contents were maximum in essential oils of T. vulgaris and O. vulgare compared to the other sample matrices studied. The thymol contents of TE of T. vulgaris and O. vulgare of different geographical regions were significantly low compared to their UBE extract. Using 12 distinct components of green analytical chemistry, the overall "analytical GREEnness (AGREE)" scale for the proposed analytical approach was computed 0.79, showing the good greener nature of the proposed analytical approach. Overall, the greener normal-phase HPTLC technique was found to be reliable for determining thymol in commercial formulations and plant-based phytopharmaceuticals.

Simultaneous Determination of Caffeine and Paracetamol in Commercial Formulations Using Greener Normal-Phase and Reversed-Phase HPTLC Methods: A Contrast of Validation Parameters

There has been no assessment of the greenness of the described analytical techniques for the simultaneous determination (SMD) of caffeine and paracetamol. As a result, in comparison to the greener normal-phase high-performance thin-layer chromatography (HPTLC) technique, this research was conducted to develop a rapid, sensitive, and greener reversed-phase HPTLC approach for the SMD of caffeine and paracetamol in commercial formulations. The greenness of both techniques was calculated using the AGREE method. For the SMD of caffeine and paracetamol, the greener normal-phase and reversed-phase HPTLC methods were linear in the 50-500 ng/band and 25-800 ng/band ranges, respectively. For the SMD of caffeine and paracetamol, the greener reversed-phase HPTLC approach was more sensitive, accurate, precise, and robust than the greener normal-phase HPTLC technique. For the SMD of caffeine paracetamol in commercial PANEXT and SAFEXT tablets, the greener reversed-phase HPTLC technique was superior to the greener normal-phase HPTLC approach. The AGREE scores for the greener normal-phase and reversed-phase HPTLC approaches were estimated as 0.81 and 0.83, respectively, indicated excellent greenness profiles for both analytical approaches. The greener reversed-phase HPTLC approach is judged superior to the greener normal-phase HPTLC approach based on numerous validation parameters and pharmaceutical assays.

A Greener HPTLC Approach for the Determination of β-Carotene in Traditional and Ultrasound-Based Extracts of Different Fractions of Daucus carota (L.), Ipomea batatas (L.), and Commercial Formulation

Various analytical approaches for determining β-carotene in vegetable crops and commercial dosage forms have been documented. However, neither the qualitative nor quantitative environmental safety and greener aspects of the literature analytical methodologies of β-carotene analysis have been assessed. As a result, the goal of this research is to develop and validate a reversed-phase “high-performance thin-layer chromatography (HPTLC)” approach for determining β-carotene in traditional (TE) and ultrasound-assisted (UBE) extracts of different fractions of Daucus carota (L.), Ipomea batatas (L.), and commercial formulation. The greener mobile phase for β-carotene analysis was a ternary mixture of ethanol, cyclohexane, and ammonia (95:2.5:2.5, v v v−1). The detection of β-carotene was done at a wavelength of 459 nm. In the 25–1000 ng band−1 range, the greener reversed-phase HPTLC approach was linear. Other validation factors for β-carotene analysis, including as accuracy, precision, robustness, and sensitivity, were likewise dependable. The contents of β-carotene were found to be maximum in hexane: acetone (50:50%) fractions of TE and UBE of D. carota and I. batatas compared to their acetone and hexane fractions. The amount of β-carotene in hexane: acetone (50:50%) portions of TE of D. carota, I. batatas and commercial formulation A was estimated to be 10.32, 3.73, and 6.73 percent w w−1, respectively. However, the amount of β-carotene in hexane: acetone (50:50%) portions of UBE of D. carota, I. batatas and commercial formulation A was estimated to be 11.03, 4.43, and 6.89 percent w w−1, respectively. The greenness scale for the proposed HPTLC strategy was calculated as 0.81 using the “analytical GREEnness (AGREE)” method, indicating that the proposed HPTLC methodology has good greenness. The UBE approach for extracting β-carotene outperformed the TE procedure. These results indicated that the greener reversed-phase HPTLC approach can be utilized for the determination of β-carotene in different vegetable crops, plant-based phytopharmaceuticals, and commercial products. In addition, this approach is also safe and sustainable due to the utilization of a greener mobile phase compared to the toxic mobile phases utilized in literature analytical approaches of β-carotene estimation.

Rapid, Highly-Sensitive and Ecologically Greener Reversed-Phase/Normal-Phase HPTLC Technique with Univariate Calibration for the Determination of Trans-Resveratrol

The rapid, highly-sensitive and ecologically greener reversed-phase (RP)/normal-phase (NP) high-performance thin-layer chromatography (HPTLC) densitometric technique has been developed and validated for the determination of trans-resveratrol (TRV). The reversed-phase HPTLC-based analysis of TRV was performed using ethanol–water (65:35, v v−1) combination as the greener mobile phase, while, the normal-phase HPTLC-based estimation of TRV was performed using chloroform–methanol (85:15, v v−1) combination as the routine mobile phase. The TRV detection was carried out at 302 nm for RP/NP densitometric assay. The linearity was recorded as 10–1200 and 30–400 ng band−1 for RP and NP HPTLC techniques, respectively. The RP densitometric assay was observed as highly-sensitive, accurate, precise and robust for TRV detection in comparison with the NP densitometric assay. The contents of TRV in commercial formulation were recorded as 101.21% utilizing the RP densitometric assay, while, the contents of TRV in commercial formulation were found to be 91.64% utilizing the NP densitometric assay. The greener profile of RP/NP technique was obtained using the analytical GREEnness (AGREE) approach. The AGREE scales for RP and NP densitometric assays were estimated 0.75 and 0.48, respectively. The recorded AGREE scale for the RP densitometric assay indicated that this technique was highly green/the ecologically greener compared to the NP densitometric assay. After successful optimization of analytical conditions, validation parameters, AGREE scale and chromatography performance, the RP densitometric assay with univariate calibration was found to be better than the NP densitometric assay for the analysis of TRV.

Highly Sensitive and Ecologically Sustainable Reversed-Phase HPTLC Method for the Determination of Hydroquinone in Commercial Whitening Creams

Hydroquinone (HDQ) is a natural depigmenting agent, which is commonly used in skin-toning preparations. The safety and greenness of analytical methods of HDQ quantification were not considered in previous literature. Therefore, a highly sensitive and ecologically greener reversed-phase high-performance thin-layer chromatography (RP-HPTLC)-based assay was established for HDQ estimation in four different commercial whitening creams (CWCs). The binary ethanol–water (60:40, v·v−1) mixture was utilized as the green solvent system. The estimation of HDQ was carried out at 291 nm. The present RP-HPTLC-based assay was linear in the 20–2400 ng band−1 range. The present analytical method was highly sensitive based on the detection and quantification data. The other validation parameters, such as accuracy, precision, and robustness, were also suitable for the determination of HDQ. Maximum HDQ quantities were obtained in CWC A (1.23% w·w−1) followed by CWC C (0.81% w·w−1), CWC D (0.43% w·w−1), and CWC B (0.37% w·w−1). The analytical GREEnness (AGREE) score for the present analytical method was estimated as 0.91, indicating the excellent greener characteristics of the present RP-HPTLC assay. These results suggest that the present analytical method is highly sensitive and ecologically sustainable for the quantitation of HDQ in its commercial formulations.

A Sustainable Reversed-Phase HPTLC Method for the Quantitative Estimation of Hesperidin in Traditional and Ultrasound-Assisted Extracts of Different Varieties of Citrus Fruit Peels and Commercial Tablets

Hesperidin (HSP) is a bioactive flavanone glycoside, present abundantly in the variety of citrus fruits. The environmental safety and sustainability of the reported analytical assays of HSP analysis have not been considered in the literature. Hence, a sensitive and sustainable “reversed-phase high-performance thin-layer chromatography (RP-HPTLC)” method has been developed and validated for HSP analysis in traditional (TE) and ultrasound-based (UBE) extracts of four different varieties of citrus fruit peels and its commercial tablet dosage forms. The binary combination of green solvents such as ethanol-water (50:50, v v−1) was used as the mobile phase. The detection of HSP was performed at 287 nm. The sustainable RP-HPTLC method was linear in 20–2000 ng band−1 range. The studied validation parameters, including accuracy, precision, robustness, sensitivity were acceptable for HSP analysis. The content of HSP in TE of four different varieties of citrus fruits including grapefruit peels (Citrus paradisi), mosambi peels (Citrus limetta), lemon peels (Citrus lemon), and orange peels (Citrus sinensis) was detected as 8.26, 6.94, 5.90, and 6.81% w w−1, respectively. The content of HSP in TE of commercial formulations A and B was detected as 5.31 and 5.55% w w−1, respectively. However, the content of HSP in UBE of grapefruit peels, mosambi peels, lemon peels, and orange peels was detected as 11.41, 8.86, 7.98, and 8.64% w w−1, respectively. The content of HSP in UBE of commercial formulations A and B was detected as 6.72 and 6.92% w w−1, respectively. The greenness score of the sustainable RP-HPTLC method was predicted as 0.83 using analytical GREEnness (AGREE) metric approach, indicated the excellent greenness profile of the RP-HPTLC method. UBE procedure for HSP was superior over its TE procedure. These observations and results suggested that the present RP-HPTLC method can be successfully used for the quantitative estimation of HSP in the variety of citrus fruit peels and its commercial formulations. In addition, this method is simple, rapid, precise, accurate, and economical compared to the reported analytical methods of HSP analysis. It is also safe and sustainable method due to the use of ethanol-water solvents systems, as both the solvents are green solvents compared to the solvents used in reported analytical methods of HSP analysis.

Rapid, Sensitive, and Sustainable Reversed-Phase HPTLC Method in Comparison to the Normal-Phase HPTLC for the Determination of Pterostilbene in Capsule Dosage Form

The greenness evaluation of literature analytical methods for pterostilbene (PT) analysis was not performed. Accordingly, the rapid, sensitive, and green/sustainable reversed-phase high-performance thin-layer chromatography (RP-HPTLC) method was developed and compared to the normal-phase (NP)-HPTLC (NP-HPTLC) for the estimation of PT with a classical univariate calibration. The RP quantification of PT was performed using green solvent systems; however, the NP analysis of PT was performed using routine solvent systems. The PT was detected at 302 nm for both of the methods. The greenness scores for the current analytical assays were evaluated by the analytical GREEnness (AGREE) metric approach. The classical univariate calibration for RP and NP methods indicated the linearity range as 10–1600 and 30–400 ng band−1, respectively. The RP method was more reliable for PT analysis compared to the NP method. The PT contents in commercial capsule dosage form were found to be 100.84% using the RP method; however, the PT contents in commercial capsule dosage form were determined as 92.59% using the NP method. The AGREE scores for RP and NP methods were 0.78 and 0.46, respectively. The sustainable RP-HPTLC assay was able to detect PT in the presence of its degradation products, and hence it can be considered as a selective and stability-indicating method. Accordingly, the RP-HPTLC method with univariate calibration has been considered as a superior method over the NP-HPTLC method for PT analysis.

Simultaneous Estimation of Cinnamaldehyde and Eugenol in Essential Oils and Traditional and Ultrasound-Assisted Extracts of Different Species of Cinnamon Using a Sustainable/Green HPTLC Technique

A wide range of analytical techniques are reported for the determination of cinnamaldehyde (CCHO) and eugenol (EOH) in plant extracts and herbal formulations either alone or in combination. Nevertheless, sustainable/green analytical techniques for the estimation of CCHO and EOH either alone or in combination are scarce in the literature. Accordingly, the present research was carried out to establish a rapid, highly sensitive, and sustainable high-performance thin-layer chromatography (HPTLC) technique for the simultaneous estimation of CCHO and EOH in the traditional and ultrasound-assisted methanolic extracts of Cinnamomum zeylanicum,C. burmannii, and C. cassia and their essential oils. The simultaneous estimation of CCHO and EOH was performed through NP-18 silica gel 60 F254S HPTLC plates. The cyclohexane/ethyl acetate (90:10, v v^-1) solvent system was optimized as the mobile phase for the simultaneous estimation of CCHO and EOH. The greenness score of the HPTLC technique was predicted using AGREE software. The entire analysis was carried out at a detection wavelength of 296 nm for CCHO and EOH. The sustainable HPTLC technique was observed as linear in the range 10-2000 ng band^-1 for CCHO and EOH. The proposed technique was found to be highly sensitive, rapid, accurate, precise, and robust for the simultaneous estimation of CCHO and EOH. The content of CCHO in traditional methanolic extracts of C. zeylanicum,C. burmannii, and C. cassia was found to be 96.36, 118.49, and 114.18 mg g^-1, respectively. However, the content of CCHO in ultrasound-assisted methanolic extracts of C. zeylanicum,C. burmannii, and C. cassia was found to be 111.57, 134.39, and 129.07 mg g^-1, respectively. The content of CCHO in essential oils of C. zeylanicum,C. burmannii, and C. cassia was found to be 191.20, 214.24, and 202.09 mg g^-1, respectively. The content of EOH in traditional methanolic extracts of C. zeylanicum,C. burmannii, and C. cassia was found to be 73.38, 165.41, and 109.10 mg g^-1, respectively. However, the content of EOH in ultrasound-assisted methanolic extracts of C. zeylanicum,C. burmannii, and C. cassia was found to be 87.20, 218.09, and 121.85 mg g^-1, respectively. The content of EOH in essential oils of C. zeylanicum,C. burmannii, and C. cassia was found to be 61.26, 79.21, and 69.02 mg g^-1, respectively. The amounts of CCHO and EOH were found to be significantly higher in ultrasound-assisted extracts of all species compared to its traditional extraction and hence ultrasound extraction has been proposed as a superior technique for the extraction of CCHO and EOH. The AGREE analytical score of the present analytical technique was predicted as 0.75, suggesting excellent greenness profile of the proposed analytical technique. Based on all these observations and results, the proposed sustainable HPTLC technique can be successfully used for the simultaneous estimation of CCHO and EOH in different plant extracts and herbal products.