Dual-emission biomass carbon dots for near-infrared ratiometric fluorescence determination and imaging of ascorbic acid

Exploring the potential of eco-friendly carbon dots in monitoring and remediation of environmental pollutants

Photoluminescent carbon dots (CDs) have garnered significant interest owing to their distinctive optical and electronic properties. In contrast to semiconductor quantum dots, which incorporated toxic elements in their composition, CDs have emerged as a promising alternative, rendering them suitable for both environmental and biological applications. CDs exhibit astonishing features, including photoluminescence, charge transfer, quantum confinement effect, and biocompatibility. Recently, CDs derived from green sources have drawn a lot of attention due to their strong photostability, reduced toxicity, better biocompatibility, enhanced fluorescence, and simplicity. These attributes have shown great promise in the areas of LED technology, bioimaging, photocatalysis, drug delivery, biosensing, and antibacterial activity. In contrast, this review offers a comprehensive overview of various green sources utilized to produce CDs and methodologies, along with their merits and demerits, with a notable emphasis on physiochemical properties. Additionally, the paper provides insight into the bibliometric analysis and recent advancements of CDs in sensing, photocatalysis, and antibacterial activity. In this field, extensive research is underway, and a total of 7,438 articles have been identified. Among these, 4242 articles are dedicated to sensing applications, while 1518 and 1678 focus on adsorption and degradation. Carbon dots demonstrate exceptional sensing capabilities within the nanomolar range with a selectivity of up to 95% for pollutants. They exhibit excellent degradation efficiency exceeding 90% within 10-130 min and possess an adsorption capacity from 100 to 800 mg/g. These fascinating qualities render them suitable for diverse applications.

Sensitive detections for three kinds of vitamin B in aqueous solution and on test paper by fluorescent dual-emission carbon dots

Although a few of fluorescent probes based on carbon dots (CDs) for vitamin B (VB) determination have been emerged, none of them can realize the detection of different kinds of VB. In this paper, nitrogen, chlorine co-doped dual-emission CDs (N, Cl-CDs) with emissions at 404 nm and 595 nm have been easily synthesized. VB2, VB9 and VB12 can all induce obvious fluorescence turn-off response toward the N, Cl-CDs. Based on that, three types of VBs are quantitatively and sensitively evaluated in aqueous solution with wide concentration ranges of 14.9-135.0 μM, 34.7-89.8 μM and 29.8-79.8 μM, respectively. Importantly, visual semiquantitative detection of VBs on a test strip are also proposed. Moreover, the current N, Cl-CDs have been successfully applied to the detection of VBs in real samples. The N, Cl-CDs are sensitively multifunctional sensors for three kinds of VBs in aqueous solution and the visual semiquantitative detection by test paper assay is simple, portable and inexpensive.

A sensitive sensor based on carbon dots for the determination of Fe3+ and ascorbic acid in foods

To develop a feasible, sensitive, and essential sensor is important for the identification of Fe3+ ions and ascorbic acid (AA). Herein, highly fluorescent heteroatom co-doped carbon dots (N,S-CDs) with a quantum yield (QY) of 24.6% were synthesized, using hydrothermal treatment of L-cysteine (Cys) and 1-amino-2-naphthol-4-sulfonic acid (ANSA). The fluorescence emission of the as-prepared N,S-CDs was quenched strongly by Fe3+ ions, and this was further recovered by the reduction effect of AA on Fe3+. Based on this, continuous fluorescence sensing of Fe3+ and AA with an "on-off-on" style was developed. The detection of Fe3+ and AA were in relatively wider linear ranges of 5.00-105 μmol L-1 and 4.97-54.8 μmol L-1, with a detection limit of 0.10 μmol L-1 and 2.4 nmol L-1 (S/N = 3), respectively. Then, the N,S-CDs were successfully used to measure Fe3+ ions and AA in some daily food samples, and this method exhibited some advantages over most other reported techniques in the term of response speed, quantum yield, and detection limit.

Comprehensive advances in the synthesis, fluorescence mechanism and multifunctional applications of red-emitting carbon nanomaterials

Red emitting fluorescent carbon nanomaterials have drawn significant scientific interest in recent years due to their high quantum yield, water-dispersibility, photostability, biocompatibility, ease of surface functionalization, low cost and eco-friendliness. The red emissive characteristics of fluorescent carbon nanomaterials generally depend on the carbon source, reaction time, synthetic approach/methodology, surface functional groups, average size, and other reaction environments, which directly or indirectly help to achieve red emission. The importance of several factors to achieve red fluorescent carbon nanomaterials is highlighted in this review. Numerous plausible theories have been explained in detail to understand the origin of red fluorescence and tunable emission in these carbon-based nanostructures. The above advantages and fluorescence in the red region make them a potential candidate for multifunctional applications in various current fields. Therefore, this review focused on the recent advances in the synthesis approach, mechanism of fluorescence, and electronic and optical properties of red-emitting fluorescent carbon nanomaterials. This review also explains the several innovative applications of red-emitting fluorescent carbon nanomaterials such as biomedicine, light-emitting devices, sensing, photocatalysis, energy, anticounterfeiting, fluorescent silk, artificial photosynthesis, etc. It is hoped that by choosing appropriate methods, the present review can inspire and guide future research on the design of red emissive fluorescent carbon nanomaterials for potential advancements in multifunctional applications.

Progress in drug delivery and diagnostic applications of carbon dots: a systematic review

Carbon dots (CDs), which have particle size of less than 10 nm, are carbon-based nanomaterials that are used in a wide range of applications in the area of novel drug delivery in cancer, ocular diseases, infectious diseases, and brain disorders. CDs are biocompatible, eco-friendly, easy to synthesize, and less toxic with excellent chemical inertness, which makes them very good nanocarrier system to deliver multi-functional drugs effectively. A huge number of researchers worldwide are working on CDs-based drug delivery systems to evaluate their versatility and efficacy in the field of pharmaceuticals. As a result, there is a tremendous increase in our understanding of the physicochemical properties, diagnostic and drug delivery aspects of CDs, which consequently has led us to design and develop CDs-based theranostic system for the treatment of multiple disorders. In this review, we aim to summarize the advances in application of CDs as nanocarrier including gene delivery, vaccine delivery and antiviral delivery, that has been carried out in the last 5 years.

Beer-derived nitrogen, phosphorus co-doped carbon quantum dots: Highly selective on-off-on fluorescent probes for the detection of ascorbic acid in fruits

A rapid, facile and ultrasensitive fluorescence sensing system based on beer-derived nitrogen, phosphorus co-doped carbon quantum dots (N, P-CQDs) for the detection of ascorbic acid (AA) in fruits was proposed. N, P-CQDs were successfully synthesized by one-step hydrothermal method, which afforded a high quantum yield (21.7 %), and showed the fluorescence with a maximum emission wavelength of 450 nm at an excitation wavelength of 370 nm. Further, N, P-CQDs were employed as an efficient sensor for ultrasensitive Fe³⁺-detection at concentrations ranging from 1-20 µM and 100-300 µM, respectively. N, P-CQDs@Fe³⁺ showed a high sensitivity and selectivity for AA detection. A linear response range for AA was obtained from 1 to 200 µM with limit of detection of 0.84 µM was obtained for AA. The result of MTT test showed that N, P-CQDs exhibit low toxicity, providing fast, accurate and less toxic route for testing AA in the food analysis fields.

CeO2–Co3O4 nanocomposite with oxidase-like activity for colorimetric detection of ascorbic acid†

A CeO₂–Co₃O₄ nanocomposite (NC) was prepared and characterized by scanning electron microscopy, transmission electron microscopy, X-ray photoelectron spectroscopy and X-ray diffraction. The obtained CeO₂–Co₃O₄ NC displayed biomimicking oxidase-like activity, which can catalytically oxidize the 3, 3′, 5, 5′-tetramethylbenzidine (TMB) substrate from colorless to the blue oxidized TMB (ox-TMB) product with a characteristic absorption peak at 652 nm. When ascorbic acid (AA) was present, ox-TMB would be reduced, resulting in a lighter blue and lower absorbance. On the basis of these facts, a simple colorimetric method for detection of AA was established with a linear relationship ranging from 1.0 to 500 μM and a detection limit of 0.25 μM. When this method was used to detect AA in human serum and commercially available vitamin C tablet samples, a good recovery of 92.0% to 109.0% was obtained. Besides, the catalytic oxidation mechanism was investigated, and the possible catalytic mechanism of CeO₂–Co₃O₄ NC can be described as follows. TMB is adsorbed on the CeO₂–Co₃O₄ NC surface and provides lone-pair electrons to the CeO₂–Co₃O₄ NC, leading to an increase in electron density of the CeO₂–Co₃O₄ NC. An increased electron density can improve the electron transfer rate between TMB and the oxygen absorbed on its surface to generate O₂˙⁻ and ˙O₂, which further oxidize TMB.

A CeO₂–Co₃O₄ nanocomposite (NC) was prepared and characterized by scanning electron microscopy, transmission electron microscopy, X-ray photoelectron spectroscopy and X-ray diffraction.

A design of red emission CDs-based aptasensor for sensitive detection of insulin via fluorescence resonance energy transfer

We successfully designed an aptasensor based on the red emission carbon dots (R-CDs) and effectively detected insulin (INS) via fluorescence resonance energy transfer (FRET). In the process, the aptamer (apt) labeled with R-CDs (R-CDs@apt) was used as fluorescence donor and graphene oxide (GO) was used as fluorescence receptor. The successful detection due to the aptamer sequence has a certain affinity for Go and INS, while the affinity for INS is stronger than that of GO. When INS is not added to the detection system, the aptamer is adsorbed onto the surface of GO, shortening the distance between R-CDs@apt and GO, resulting in FRET and the quenching of fluorescence of R-CDs@apt. When INS was added to the detection system, the aptamer selectively bound INS and separated from the adsorption of GO, FRET gradually disappeared and the fluorescence of R-CDs@apt/GO/INS system was restored. By comparing the changes of fluorescence intensity before and after adding INS, the detection of INS was implemented. The aptasensor has a good linear curve with the detection limit of as low as 1.1 nM when the concentration of INS reached 1.3-150 nM. This method has excellent selectivity and anti-interference. Therefore, it is a potential method for detecting substances in biological fluids.

Carbon quantum dots with blue/near infrared emissions for ratiometric fluorescent lornoxicam sensing and bio-imaging

An economical and eco-friendly hydrothermal method for the preparation of nitrogen-doped carbon quantum dots (N-CQDs) was studied with rambutan peel and lysine. The morphology, structure, and optical properties of N-CQDs were characterized by transmission electron microscopy, Fourier transform infrared spectrometry, X-ray powder diffractometer, X-ray photoelectron spectrometry, and UV spectrophotometry. The synthesized N-CQDs have excellent characteristics such as strong fluorescence, good dispersion, high stability, and excellent water solubility. The absolute fluorescence quantum yield is 1.02%, the average particle size is 1.63 nm, and the maximum excitation wavelength is 340 nm. The maximum emission wavelengths are 430 nm and 800 nm. As a quencher, lornoxicam (LNX) was used to quench the fluorescence of N-CQDs with the mechanism of inner filter effect. The fluorescence ratio of N-CQDs (F₄₃₀/F₈₀₀) shows a good linear relationship to the concentration of LNX. The linear range and the detection limit of LNX are 0.01‒100 and 0.003 μmol/L, respectively. An effective ratiometric fluorescence probe for the detection of LNX was constructed. The method has the advantages of low detection limit, high sensitivity, wide linear range, and can be applied to the determination of LNX in real samples. Moreover, according to the excitation-dependent fluorescence behavior, dual-wavelength emission, and biocompatibility of N-CQDs, it has been applied to cell imaging.

Heavy metal ion detection using green precursor derived carbon dots

The discovery of carbon dots (CDs) for environmental remediation has gained awareness because of the diverse economically viable and environmental friendly green precursors generated from biowastes and biomass compared to the toxic inorganic quantum dots and CDs prepared from chemical precursors. This review presents the recent progress in green CDs, including their synthesis methods and sensing applications for the detection of heavy metal ions such as Iron (III), Mercury (II), Copper (II), Chromium (VI), Lead (II), Arsenic (III), Cobalt (II), Aluminum (III), Silver (I), and Gold (III) which are prominent environmental pollutants. The comparison based on selectivity, sensitivity, quantum yield, detection limit, linear concentration range, and sensing mechanisms are also reported. This review also covers the performance of doped green CDs using heteroatoms, toward the detection of heavy metal ions. Apart from the future perspectives, this review provides a general guide to use such environmental friendly CDs to detect harmful pollutants.

Advanced NIR ratiometric probes for intravital biomedical imaging

Near-infrared (NIR) fluorescence imaging technology (NIR-I region, 650-950 nm and NIR-II region, 1000-1700 nm), with deeper tissue penetration and less disturbance from auto-fluorescence than that in visible region (400-650 nm), is playing a more and more extensive role in the field of biomedical imaging. With the development of precise medicine, intelligent NIR fluorescent probes have been meticulously designed to provide more sensitive, specific and accurate feedback on detection. Especially, recently developed ratiometric fluorescent probes have been devoted to quantify physiological and pathological parameters with a combination of responsive fluorescence changes and self-calibration. Herein, we systemically introduced the construction strategies of NIR ratiometric fluorescent probes and their applications in biological imagingin vivo, such as molecular detection, pH and temperature measurement, drug delivery monitoring and treatment evaluation. We further summarized possible optimization on the design of ratiometric probes for quantitative analysis with NIR fluorescence, and prospected the broader optical applications of ratiometric probes in life science and clinical translation.

A Review of Off-On Fluorescent Nanoprobes: Mechanisms, Properties, and Applications

With the development of nanomaterials, fluorescent nanoprobes have attracted enormous attention in the fields of chemical sensing, optical materials, and biological detection. In this paper, the advantages of "off-on" fluorescent nanoprobes in disease detection, such as high sensitivity and short response time, are attentively highlighted. The characteristics, sensing mechanisms, and classifications of disease-related target substances, along with applications of these nanoprobes in cancer diagnosis and therapy are summarized systematically. In addition, the prospects of "off-on" fluorescent nanoprobe in disease detection are predicted. In this review, we presented information from all the papers published in the last 5 years discussing "off-on" fluorescent nanoprobes. This review was written in the hopes of being useful to researchers who are interested in further developing fluorescent nanoprobes. The characteristics of these nanoprobes are explained systematically, and data references and supports for biological analysis, clinical drug improvement, and disease detection have been provided appropriately.