Gas flow-assisted dispersive liquid-phase microextraction to analyze parabens in personal hygiene products

Determination of remdesivir in human plasma using (deep eutectic solvent-ionic liquid) ferrofluid microextraction combined with liquid chromatography

A microextraction technique based on ferrofluids was developed for the preconcentration and quantification of Remdesivir in human plasma samples. This method utilized a new type of magnetic colloids created by combining silica-coated magnetic particles with modified ionic liquid and natural hydrophobic deep eutectic solvent as the carrier liquid. The efficiency of the sorption and desorption steps was optimized using a chemometrics approach. Under the optimized conditions, the calibration curve exhibited linearity in the concentration range of 0.5 to 500.0 μg L-1, with a limit of detection and quantification of 0.2 and 0.5 μg L-1, respectively. The method precision was evaluated by assessing intra- and interday precision at three different analyte concentrations, yielding values of 8.9% and 16.8%, respectively. Moreover, the method accuracy fell within the range of 90.9% to 107.5%. This proposed method offers a green and environmentally friendly sample preparation technique for conducting pharmacodynamic, pharmacokinetic, and therapeutic drug monitoring studies of Remdesivir in biological fluids. Importantly, this technique eliminates the need for external energy sources or the use of dispersive solvents, providing a more efficient and sustainable approach.

MIL-68 (Ga) for the extraction of derivatized and non-derivatized parabens from healthcare products

This study was the first-ever attempt to apply MIL-68 (Ga) in developing an analytical method. The method extracts and preconcentrates some parabens from mouthwash and hydrating gel samples. The variable extraction parameters were optimized, and the figures of merit were documented. Avogadro software was used besides discussing intermolecular interactions to clarify the absorption process. ComplexGAPI software was also exploited to assess the greenness of the method. After the derivatization of the parabens using acetic anhydride in the presence of sodium carbonate, sodium chloride was added to the solution and vortexed to dissolve. A few milligrams of MIL-68 (Ga) were added into the solution and vortexed. Centrifugation separated the analyte-loaded absorbent, which was treated with mL volume of methanol through vortexing for desorption aim. A few microliters of 1,2-dibromoethane were merged with the methanolic phase and injected into a sodium chloride solution. One microliter of the extracted phase was injected into a gas chromatograph equipped with a flame ionization detector. High enrichment factors (200-330), reasonable extraction recoveries (40-66%), wide linear ranges (265-30,000 µg L-1), and appreciable coefficients of determination (0.996-0.999) were documented. The applicability of dispersive solid phase extraction for extracting polar analytes, imposing no additional step for performing derivatization, the capability of MIL-68 (Ga) for the absorption of both derivatized and non-derivatized parabens, the use of only 10 mg absorbent, and one-pot synthesis besides no high temperature or long reaction time in the sorbent provision are the highlights of the method.

Strategies to improve the challenges of classic dispersive liquid-liquid microextraction for determination of the parabens in personal care products-One step closer to green analytical chemistry

Gas flow-assisted dispersive liquid-phase microextraction based on deep eutectic solvent was used to determine parabens in personal care products such as mouthwash, lidocaine gel, aloe vera gel, and skin tonic. A homemade extraction device was innovated, in which by passing the stream of gas bubbles through the deep eutectic solvent a thin layer of the extraction phase is coated on the surface of the bubbles. The extraction is finally achieved when the bubbles are going up through the sample. The single-factor experiments and response surface methodology were applied to optimize the independent variables. The linear range of the method was 0.5 to 1000 µg L^-1, the coefficient of determination for the goal analytes was higher than 0.9989, the instrumental limit of detections were in the range 0.2-0.3 μg L^-1, and the instrumental limit of quantifications were in the range 0.5-1.1 μg L^-1, the relative standard deviations were <5.2% for repeatability and <11.2% for intermediate precision, and the enrichment factors were 66 to 87 obtained under the optimized conditions. A spiking approach by means of standard material was used to estimate accuracy. The relative recoveries were in the range 95.8-105.2%. By using mentioned strategies, the organic waste and energy consumption reduced, toxic reagents replaced with safer ones, and operator safety enhanced. Accordingly, these benefits have been simultaneously attained and, the proposed method was one step closer to automation and sustainable analytical chemistry.