An eco-friendly near infrared fluorescence molecularly imprinted sensor based on zeolite imidazolate framework-8 for rapid determination of trace trypsin

An impedimetric sensor based on molecularly imprinted nanoparticles for the determination of trypsin in artificial matrices - towards point-of-care diagnostics

A high-performance impedimetric sensing platform was designed to detect proteins by employing molecularly imprinted polymeric nanoparticles (nanoMIPs) as selective receptors. This was achieved via the combination of the nanoMIPs with a self-assembled thioctic acid (SAM-TA) monolayer onto screen-printed gold electrodes, providing stable covalent attachment of the selective binder to the transducer. Taguchi design has been modelled to achieve the optimal level of sensor fabrication parameters and to maximise the immobilisation of nanoMIPs and their response (e.g. the response of imprinted polymers compared with the non-imprinted control). The developed sensor was tested towards a range of concentrations of trypsin dissolved in ammonium acetate (pH = 6) and showed promising applicability in artificial saliva, with a recovery percentage between 103 and 107%.

Novel dual-emission fluorescence imprinted sensor based on Mg, N-CDs and metal-organic frameworks for rapid and smart detection of 2, 4, 6-trinitrophenol

Rapid and real-time detection of 2, 4, 6-trinitrophenol (TNP) is of great importance for the living environment and human health. Herein, we constructed an innovative ratiometric fluorescence imprinted sensor with fast response and high selectivity based on magnesium and nitrogen co-doped carbon dots (Mg, N-CDs) and chromium telluride quantum dots (r-CdTe) self-assembled in zirconium-based metal organic frameworks (UiO-66) combined with imprinted polymers for the detection of TNP. In the protocol, the introduction of UiO-66 with large specific surface area and porosity using as carrier material significantly enhanced the mass transfer rate, which improved the sensitivity of the Mg, N-CDs/r-CdTe@UiO-66@MIP (LHU@MIP). And the Mg, N-CDs with high quantum yields and r-CdTe were selected as fluorescence emitting elements to yield fluorescence signal, achieving signal amplification. The dual-channel strategy enabled the sensor to not only display a fast fluorescence response, but also generate a dual-response signal under the action of internal filtering effect (IFE). Combining these advantages, the LHU@MIP had a wide linear range (1-100 μM), good detection sensitivity (0.56 μM), and a distinct color change (from blue to pink). Meanwhile, for accurate on-site analysis, we designed a portable smart sensing platform with a color recognizer application. The smartphone enabled visual sensing of TNP by capturing fluorescent images and converting them into digital values. More importantly, the platform was successfully utilized for the analysis of TNP in the simulated actual samples with considerable results. Therefore, the developed platform was characterized by low cost, portability, ideal specificity, and provided a strategy for on-site monitoring of TNP.

A Review of Sensing Applications of Molecularly Imprinted Fluorescent Carbon Dots for Food and Biological Sample Analysis

Molecularly imprinted fluorescent carbon dots (MI-FCDs) find numerous applications in analytical chemistry due to their outstanding photoluminescent properties and having specific pockets for the recognition of target molecules. Despite significant advances, practical applications of MI-FCDs-based fluorescent sensors are still in their initial stages. Therefore, the topical developments in the synthesis, working, and application of MI-FCDs for sensing various target species (e.g., pharmaceuticals, biomolecules, pesticides, food additives, and miscellaneous species) in food and biological media have been highlighted. Moreover, a careful evaluation has been made to select the best methods based on their performance in terms of analytical parameters. To expand the horizons of this field, important challenges and future directions for developing MI-FCDs for practical use are also presented. This review will highlight important aspects of MI-FCDs-based fluorescent sensors for their applicability in food science, material science, environmental science, nanoscience, and biotechnology.

Down/up-conversion dual-mode ratiometric fluorescence imprinted sensor embedded with metal-organic frameworks for dual-channel multi-emission multiplexed visual detection of thiamphenicol

The establishment of a fluorescence sensing system for sensitive and selective visual detection of trace antibiotics is of great significance to food safety and human health risk assessment. A simple and rapid one-pot strategy was developed successfully to synthesize a down/up-conversion dual-excitation multi-emission fluorescence imprinted sensor for dual-channel thiamphenicol (TAP) detection. In this strategy, the metal-organic frameworks were in situ incorporated into the fluorescence imprinted sensor, guiding the coordination induced emission of abiotic carbon dots and signal-amplification effect of fluorescence sensing. Under dual-excitation (370 nm and 780 nm), the fluorescence imprinted sensor exhibited a dual-channel fluorescence response toward TAP with two-part linear ranges of 5.0 nM-6.0 μM and 6.0 μM-26.0 μM. Significantly, the fluorescence color ranged from blue to purple to red can be observed with the naked eye. The results of the dual-channel TAP determination in actual samples by the fluorescence imprinted sensor indicated that the fluorescence imprinted sensor provided a sensitive, selective, and multiplexed visual detection of TAP in complex sample.

Ultra Narrow Dual-Band Perfect Absorber Based on a Dielectric-Dielectric-Metal Three-Layer Film Material

This paper proposes a perfect metamaterial absorber based on a dielectric-dielectric-metal structure, which realizes ultra-narrowband dual-band absorption in the near-infrared band. The maximum Q factor is 484. The physical mechanism that causes resonance is hybrid coupling between magnetic polaritons resonance and plasmon resonance. At the same time, the research results show that the intensity of magnetic polaritons resonance is much greater than the intensity of the plasmon resonance. By changing the structural parameters and the incident angle of the light source, it is proven that the absorber is tunable, and the working angle tolerance is 15°. In addition, the sensitivity and figure of merit when used as a refractive index sensor are also analyzed. This design provides a new idea for the design of high-Q optical devices, which can be applied to photon detection, spectral sensing, and other high-Q multispectral fields.