Cyclodextrin-starch hard gel as an efficient green sorbent for dispersive micro solid-phase extraction of eight polycyclic aromatic hydrocarbons from environmental water samples

Synthesis of green nanosorbent from bovine serum albumin and curcumin for magnetic solid phase extraction of pesticides from food samples

For the first time, a magnetic carbon nanocomposite was synthesized using one-step hydrothermal procedure, employing bovine serum albumin, curcumin, and ferric ammonium citrate. Additionally, the application of this novel composite as an adsorbent for magnetic dispersive solid phase extraction of fungicides and pesticides from water and food samples is a unique aspect of this study. Under optimum conditions (salt concentration: 5.0% w/v, pH: 7.0, desorption solvent: ethanol, sorbent amount: 20 mg, extraction time: 20 min, desorption time: 3 min, stirring rate: 500 rpm, sample volume: 30 mL, extraction temperature: room temperature, and desorption solvent volume: 150 μL) linearity (2.5 to 1400 ng mL-1), coefficients of determination (R2 ≥ 0.997), limits of detection (0.75 to 1.5 ng mL-1), and limits of quantification (2.5 to 5.0 ng mL-1) were achieved. The method validation results showed extraction recovery ranging from 71.2% to 93.4%, and preconcentration factors ranging from 142.5 to 186.1.

Thin-film solid-phase microextraction of pesticides from cereal samples using electrospun polyvinyl alcohol/modified chitosan/porous organic framework nanofibers

In this study, a coating of electrospun polyvinyl alcohol/modified chitosan/hydroxy-containing porous organic framework (PVA/MCS/HC-POF) was fabricated and applied as a novel sorbent for thin-film solid-phase microextraction of pesticides from cereal samples, followed by HPLC-UV. The successful fabrication of PVA/MCS/HC-POF was confirmed through characterization tests. The functional group of MCS and a large number of hydroxyl groups on the HC-POF structure contributed to the co-extraction of pesticides. Under the optimum conditions, the calibration plots were linear within the range of 5.0-800 ng mL-1 (r2 ≥ 0.978), and the limits of detection were obtained below 4.0 ng mL-1. The method's precision was investigated through intra-day, inter-day, and film-to-film RSD (%) measurements, all of which were less than 6.5 %, 8.2 %, and 10.0 %, respectively. Furthermore, satisfactory recoveries ranging from 63.3 % to 79.0 % were obtained. Accordingly, the proposed method can be considered a suitable alternative for measuring trace amounts of pesticides in cereal samples.

A magnetic solid phase extraction microfluidic chip coupled with gas chromatography-mass spectrometry for the determination of polycyclic aromatic hydrocarbons in aqueous samples

In this paper, we designed and manufactured a reliable magnetic solid phase extraction (MSPE) microfluidic chip for determination of polycyclic aromatic hydrocarbons (PAHs) in water combined with gas chromatography-mass spectrometry. Sample loading, washing and elution are implemented with microinjection pump and integrated on a single chip, which reduced manual operation. Magnets were used to fix octadecyl/phenyl bifunctional Fe3O4@SiO2 extractant to avoid the design of weir structure in extraction chamber. The whole microfluidic chip was simple and low cost. Based on the microfluidic chip extraction platform, the on-chip MSPE method for the determination of PAHs was optimized and established. The results showed that this method required only 2 mL of sample, 2 mg of extractant, and 50 μL of elution organic solvent for whole on-chip MSPE process, which was environmentally friendly and consistent with green chemistry. Method verification results were displayed which the linear range of five PAHs was between 1-100 ng/mL with good linearity (R2≥ 0.9985), and the detection limits (S/N = 3) were 0.08-0.26 ng/mL. The RSDs of intra-day precision (n=6) and inter-day precision (n=9) for PAHs were less than 6.1 % and 7.2 %, respectively. Enrichment factors were determined to be 31.3-37.7. The recoveries of river water, tap water, bottle water, waste water and urine at three spiked levels were in the range of 89.9% to 113.7% and the matrix effect values were between 83.8% to 109.6%. The extraction platform has the advantages of accurate analysis, simple design and cost-effective, which is conducive to the widespread use of microfluidic chips.

Green hydrophobic maltodextrin nanosponges for magnetic solid-phase extraction of hypothalamic peptides from plasma samples

In this work, for the first time, magnetic-phthalated maltodextrin nanosponges (M-PAMDNSs) were synthetized and introduced as efficient and green sorbents. The integration of phthaloyl groups as hydrophobic moieties into networks of maltodextrin nanosponges provided good enrichment for hypothalamic-related peptides (HRPs). The synthesized materials were characterized by 1H nuclear magnetic resonance spectroscopy, water contact angle, attenuated total reflection-Fourier transform infrared spectroscopy, dynamic light scattering, zeta potential, pH point of zero charge, acid-base titration, field-emission scanning electron microscopy, Brunauer-Emmett-Teller, and vibrating sample magnetometer. Under the optimized conditions (sorbent amount: 5.0 mg, desorption solvent volume and type: 300 µL of methanol: H2O: trifluoroacetic acid, extraction time: 15 min, and desorption time: 10 min), the developed magnetic solid-phase extraction (MSPE) method in combination with HPLC-UV was used as a novel and sensitive analytical method for the determination of HRPs in plasma samples. The proposed MSPE-HPLC-UV method provided good linearity (1.5-500 ng mL-1 R2 ≥ 0.9988), low limits of detection (0.1-0.2 ng mL-1) and quantification (0.4-0.8 ng mL-1), desirable precision (RSD ≤ 8.8%, n ₌ 5), satisfactory enrichment factor (EFs ≥ 66.0), and well relative recoveries (92.8-108.8%). Overall, the established method effectively expanded the analytical potential of MSPE approach for the quantification of HRPs in biological samples.

Application of polysaccharide biopolymers as natural adsorbent in sample preparation

Preparing samples for analyses is perhaps the most important part to analyses. The varied functional groups present on the surface of biopolymers bestow them appropriate adsorption properties. Properties like biocompatibility, biodegradability, presence of different surface functional group, high porosity, considerable absorption capacity for water, the potential for modification, etc. turn biopolymers to promising candidates for varied applications. In addition, one of the most important parts of determination of an analyte in a matrix is sample preparation step and the efficiency of this step in solid phase extraction methods is largely dependent on the type of adsorbent used. Due to the unique properties of biopolymers they are considered an appropriate choice for using as sorbent in sample preparation methods that use from a solid adsorbent. Many review articles have been published on the application of diverse adsorbents in sample preparation methods, however despite the numerous advantages of biopolymers mentioned; review articles in this field are very few. Thus, in this paper we review the reports in different areas of sample preparation that use polysaccharides-based biopolymers as sorbents for extraction and determination of diverse organic and inorganic analytes.