A flexible Eu:Y2O3-polyvinyl alcohol photoluminescent film for sensitive and rapid detection of arsenic ions

Eco-corona-mediated transformation of nano-sized Y2O3 in simulated freshwater: A short-term study

The use of metal and metal oxide nanomaterials (NMs) is experiencing a significant surge in popularity due to their distinctive structures and properties, making them highly attractive for a wide range of applications. This increases the risks of their potential negative impact on organisms if dispersed into the environment. Information about their behavior and transformation upon environmental interactions in aquatic settings is limited. In this study, the influence of naturally excreted biomolecules from the zooplankton Daphnia magna on nanosized Y2O3 of different concentrations was systematically examined in synthetic freshwater in terms of adsorption and eco-corona formation, colloidal stability, transformation, dissolution, and ecotoxicity towards D. magna. The formation of an eco-corona on the surface of the Y2O3 NMs leads to improved colloidal stability and a reduced extent of dissolution. Exposure to the Y2O3 NMs lowered the survival probability of D. magna considerably. The ecotoxic potency was slightly reduced by the formation of the eco-corona, though shown to be particle concentration-specific. Overall, the results highlight the importance of systematic mechanistic and fundamental studies of factors that can affect the environmental fate and ecotoxic potency of NMs.

A Eu3+doped functional core-shell nanophosphor as fluorescent biosensor for highly selective and sensitive detection of dsDNA

Lanthanide-doped core-shell nanomaterials have illustrated budding potential as luminescent materials, but their biological applications have still been very limited due to their aqueous solubility and biocompatibility. Here, we report a simple and cost-effective approach to construct a water-stable chitosan-functionalized lanthanoid-based core shell (Ca-Eu:Y2O3@SiO2) nanophosphor. The as-synthesized Ca-Eu:Y2O3@SiO2-chitosan (CEY@SiO2-CH) nanophosphor has been characterized for its structural, morphological, and optical properties, by employing different analytical tools. This sensing platform is suitable for dsDNA probing by tracing the "turn on" fluorescence signal generated by CEY@SiO2-CH nanophosphor with the addition of dsDNA. The ratio of fluorescence intensity enhancement is proportional to the concentration of dsDNA in the range 0.1-90 nM, with the limit of detection at ⁓16.1 pM under optimal experimental conditions. The enhancement in fluorescence response of functionalized core-shell phosphor with dsDNA is due to the antenna effect. Additionally, response of probe has been studied for the real samples displaying percent recovery in between 101 and 105, maximum RSD% upto 5.23 (n = 3). This outcome can be applied to the selective sensing of dsDNA through optical response. These findings establish the CEY@SiO2-CH a simple, portable, and potential candidate as a sensor for rapid and analytical detection of dsDNA.

Multicolor tunable bright photoluminescence in Ca2+/Mg2+ modified Eu3+ doped ZnGa2O4 phosphors under UV excitation for solid state lighting applications

The Eu³⁺ doped and Mg²⁺/Ca²⁺ co-doped ZnGa₂O₄ phosphor samples were synthesized by solid-state reaction method and their structural and optical properties studied. The phase, crystallinity and particles size of the phosphor samples were studied by XRD and SEM measurements. EDS analyses were used to identify the elements present in the phosphor materials. The vibrational groups present in the phosphor samples were examined by Fourier transform infrared (FTIR) measurements. Pure ZnGa₂O₄ emits intense blue light under 260 nm excitation. However, Eu³⁺ doped and Mg²⁺/Ca²⁺ co-doped ZnGa₂O₄ phosphor samples exhibit intense red emission under 393 nm excitation. A bluish white color is observed in these samples under 290 nm excitation. The maximum PL emission intensity is found at 0.1 mol% Eu³⁺ doping concentration. For higher concentrations, concentration quenching was observed due to dipole-dipole interaction. The emission intensity is enhanced upto 1.20 and 2.91 times on co-doping of Mg²⁺ and Ca²⁺via induced crystal field due to charge imbalance. The emission intensity of the phosphor is found to enhance further on annealing the samples at 873 K. Under various excitation wavelengths, color tunability was seen from blue to bluish-white to red regions. The lifetime of the ⁵D₀ level of the Eu³⁺ ion improves via doping of Mg²⁺/Ca²⁺ ions and it increases appreciably on annealing. The temperature dependent photoluminescence study (TDPL) reveals a thermal quenching behavior of the sample with thermal stability ∼65% and activation energy ∼0.223 eV in the Eu³⁺/Ca²⁺ co-doped ZnGa₂O₄ phosphor sample.

Enhance photoluminescence properties of Ca-Eu:Y2O3@SiO2 core-shell nanomaterial for the advanced forensic and LEDs applications

The divalent (Ca²⁺)-doped Eu:Y₂O₃@SiO₂ core-shell luminescent nanophosphors have been synthesised by a cost-effective combustion technique. Various characterizations were carried out to confirm the successful formation of the core-shell structure. The TEM micrograph reveals the thickness of the SiO₂ coating over Ca-Eu:Y₂O₃ as ∼25 nm. The optimal value of silica coating over the phosphor has been obtained as 10 vol%(TEOS) of SiO₂, with this value increasing fluorescence intensity by 34 %. Phosphor exhibits CIE coordinates as x = 0.425, y = 0.569 and a CCT value as ∼2115 K with color purity and the respective CRI of 80 % and 98 %, respectively, which make the core-shell nanophosphor suitable for warm LEDs, and other optoelectronic applications. Further, the core-shell nanophosphor has been investigated for the visualisation of latent finger prints and as security ink. The findings point towards the prospective future application of nanophosphor materials for anti-counterfeiting purposes and latent finger prints for forensic purposes.

A review on multi-synergistic transition metal oxide systems towards arsenic treatment: Near molecular analysis of surface-complexation (synchrotron studies/modeling tools)

The science and interface chemistry between the arsenic (As) anions and the different adsorbent systems have been gaining interest in recent years in environmental remediation applications. Metal-oxides and the corresponding hybrid systems have shown promising performance as novel adsorbents in various treatment technologies. The abundance, surface chemistry, high surface area (active-centres), various synthesis and functionalization methodologies, and good recyclability make these metal oxide-based nanomaterials as potential remediating agents for As oxyanions. This work critically reviews eight different platforms focused on the arsenic contamination issue, where the first classification describes the origin of arsenic contamination and presents geographical and demo-graphical considerations. The following section briefs the state-of-the-art remediation techniques for arsenic treatment with a comparative evaluation. An emphasized discussion has been provided regarding the adsorption and classification of various metal oxide adsorbents. In the next classification, various multi-synergism abilities like Redox activity, Surface functional groups, Surface area/morphology, Heterogeneous catalysis, Reactive oxygen species, Photo-catalytic/electro-catalytic reactions, and Electrosorption are detailed. The classification of various characterization tools for accessing the arsenic remediation qualitatively and quantitatively are given in the fifth chapter. The first-of-its-kind dedicated analysis has been given on the surface complexation aspects of the arsenic speciation onto various metal adsorbent systems using synchrotron results, surface-complexation modeling, and molecular simulation (e.g., DFT) in the sixth chapter. The current sensing applications of these novel nano-material systems for arsenic determination using colorimetric and electrochemical-based analytical tools and a note about the economic parameters, i.e., regeneration aspects of various adsorbent systems/the sustainable applications of the treated sludge materials, are provided in the final sections. This work makes a critical analysis of 'Environmental Nanotechnology' towards 'Arsenic Treatment'.

Research Progress in Fluorescent Probes for Arsenic Species

Arsenic is a toxic non-metallic element that is widely found in nature. In addition, arsenic and arsenic compounds are included in the list of Group I carcinogens and toxic water pollutants. Therefore, rapid and efficient methods for detecting arsenic are necessary. In the past decade, a variety of small molecule fluorescent probes have been developed, which has been widely recognized for their rapidness, efficiency, convenience and sensitivity. With the development of new nanomaterials (AuNPs, CDs and QDs), organic molecules and biomolecules, the conventional detection of arsenic species based on fluorescence spectroscopy is gradually transforming from the laboratory to the portable kit. Therefore, in view of the current research status, this review introduces the research progress of both traditional and newly developed fluorescence spectrometry based on novel materials for arsenic detection, and discusses the potential of this technology in the rapid screening and field testing of water samples contaminated with arsenic. The review also discusses the problems that still exist in this field, as well as the expectations.

Tunable photoluminescence and energy transfer of Eu3+,Ho3+-doped Ca0.05Y1.93-xO2 nanophosphors for warm white LEDs applications

A series of Eu³⁺ ions doped Ca_0.05Y_1.93-xO₃:0.02Ho³⁺ (CYO:Ho³⁺,xEu³⁺) nanophosphors having multicolour tuneability have been synthesised by following a simplistic solution combustion approach. The synthesised samples have been characterised by employing X-ray diffraction (XRD), Transmission electron microscope (TEM), and Fourier transforms infrared spectroscopy (FTIR). The optical properties have been engrossed by UV–visible and photoluminescent excitation and emission spectra, and decay lifetimes measurements. The characteristic emission, which occurs due to the f-f transition of Ho³⁺ and Eu³⁺ has been observed in emission spectra with excitation of 448 nm. By adjusting the doping ratio of Ho³⁺/Eu³⁺, the as-synthesized nanophosphor accomplishes multicolour tunability from green-yellow to red. Emission spectra and decay lifetime curve recommend dipole–dipole interaction causes energy transfer from Ho³⁺ → Eu³⁺. The energy transfer process from Ho³⁺ to Eu³⁺ has been confirmed through electric dipole–dipole interaction with critical distance 15.146 Å. Moreover, temperature dependent emission spectra show the high thermal stability with an activation energy ⁓ 0.21 eV, with the quantum efficiency of 83.6%. CIE coordinate illustrates that the singly doped Ho³⁺ and Eu³⁺ lie in the green and red region, respectively, while the as-synthesized CYO:Ho³⁺,xEu³⁺shows tunability from green to red with low CCT and high colour purity values. Hence, the CYO:Ho³⁺,xEu³⁺nanophosphor may be a near-UV excited multicolour colour-tunable pertinent candidate with potential prospects for multicolour- display and near-ultraviolet lighting applications.