In-situ decomposed nanofluids dispersive liquid-phase microextraction for detection of seven triazole fungicidets in fruit juices and tea drinks

Lignin-based emulsive liquid-liquid microextraction for detecting triazole fungicides in water, juice, vinegar, and alcoholic beverages via UHPLC-MS/MS

A universal, green, and rapid lignin-based emulsive liquid-liquid microextraction (ELLME) method was established to detect nine triazole fungicides in water, juice, vinegar, and alcoholic beverages via UHPLC-MS/MS. By employing an environmentally friendly emulsifier (lignin), the proposed ELLME was compatible with more extractants, and not restricted to fatty acids. Due to the high amphiphilic properties and three-dimensional structure of lignin, the emulsion was quickly formed through several aspirate-dispense cycles of the green extractant (guaiacol) and lignin solution. And a micropipette was used for rapid microextraction. The limit of detection was 0.0002-0.0057 μg L-1. The extraction recoveries and relative standard deviation were 81.7%-102.0% and 0.9%-7.1%, respectively. Finally, three green metric tools were used to verify the greenness of the whole procedure. The proposed lignin-based ELLME successfully emulsified green solvents, indicating that emerging solvents may be excellent alternatives as extractants in ELLME for pesticide residue analysis in food samples.

Triazoles in the environment: An update on sample pretreatment and analysis methods

Triazoles, due to their high bactericidal performance, have been widely used in the agricultural, clinical, and chemical industry. However, triazoles have been proven to cause endocrine-toxic and organ impairment in humans as a potentially toxic substance. Besides, because of the improper use and difficulty of degradation, triazoles pesticide residues left in the environment could pose a threat to the environment. Therefore, the rapid, reliable, accurate, and high-sensitivity triazoles analysis methods are significantly essential to effectively monitor their presence in various samples and safeguard human health. This review aims to summarize and update the progress of the pretreatment and analytical methods of triazole fungicides in environmental samples from 2012 to 2024. Common pretreatment methods used to extract and purify targets include simple steps (e.g., protein precipitation and coated blade spray), liquid-liquid extraction, solid-phase extraction, and various microextraction methods such as liquid-phase microextraction and solid-phase microextraction, among others. Detection methods mainly include liquid chromatography-mass spectrometry, gas chromatography-mass spectrometry, supercritical fluid chromatography, sensing methods, and capillary electrophoresis. In addition, we elaborate and compare the advantages and disadvantages of different pretreatment and analytical methods, and their development prospects are discussed.

Ultrasound assisted upper critical solution temperature type switchable deep eutectic solvent based liquid-liquid microextraction for the determination of triazole in water

BACKGROUND

The use of pesticides to protect crops has long been an important measure to provide healthy and safe agricultural products, but excess pesticides flow into fields and rivers, causing environmental pollution. Earlier methods utilizing organic solvent liquid-liquid microextraction for pesticide residue detection were not environmentally friendly. Therefore, it is significant to find a greener and more convenient detection method to determine pesticide residues.

RESULTS

A new method was established to detect three triazole fungicides (TFs), including myclobutanil, epoxiconazole and tebuconazole, in environmental water samples. And the determination was conducted using a high-performance liquid chromatography with the ultraviolet detector (HPLC-UV). The switchable deep eutectic solvent (SDES) can be reversibly switched between hydrophilic and hydrophobic states through temperature modulation. Additionally, the method exhibited excellent linearity for all target analytes within the concentration range of 10-2000 μg L-1, with satisfactory R2 values (≥0.9975). The limits of detection (LODs) ranged from 2.3 to 2.6 μg L-1, and the limits of quantification (LOQs) ranged from 7.8 to 8.7 μg L-1. The accuracy of the method was assessed through intra-day and inter-day precision tests, yielding relative standard deviations (RSDs) in the ranges of 2.8%-6.7% and 2.2%-7.5%, respectively. Density functional theory (DFT) results indicated that hydrogen bonding is a significant factor affecting the binding of DES with triazoles. Three different green assessment tools were used to prove that the SDES-HLLME method had good greenness and broad applicability.

SIGNIFICANCE

This is a homogeneous liquid-liquid microextraction (HLLME) method based on the upper critical solution temperature (UCST) type switchable deep eutectic solvent program, which can complete the extraction within a few minutes without dispersant. In terms of pesticide detection, the analytical method is simple and more conducive to environmental protection.

Easy and fast synthesis of MnCo-LDH yolk-shell spheres porous composites applied electrospinning nanofibers highly effective for extracting triazole fungicides

Today, the wide utilization of triazole fungicides due to environmental damage and its side effects has raised global concern. Thus, in this investigation, polyacrylonitrile/MnCo-layered double hydroxides nanofiber was synthesized and applied as an effective and novel adsorbent at thin-film solid-phase micro-extraction technique for the quick and concurrent extraction of five triazole fungicides in fruit and vegetable samples before quantitative analysis by high-performance liquid chromatography-ultraviolet. The incorporation of MnCo-layered double hydroxides with porous structure and abundant functional groups in a polymer medium improves the extraction efficiency of nanofibers owing to hydrogen bonding and π-π interactions formed between analytes and synthesized nano-adsorbent. Various important elements that affect the extraction efficiency of the intended analytes were optimized using a time-variable approach. Under the optimum conditions, the limit of detection and quantification range from 0.1 to 0.15 and 0.3-0.5 ng mL-1, respectively.

Quick synthesis of CoFe-PBA@GO with electrochemical method as a novel, sensitive, and degradable nanocomposite applied in nanofibers for triazole extraction before HPLC-UV analysis

Today, the wide use of triazole fungicides due to environmental damage and its side effects has raised global concern. Hence, in this research, poly-vinyl alcohol/polyacrylic-acid/CoFe-PBA@GO electrospun nanofiber was synthesized and applied as effective, degradable, and novel adsorbent at pipette-tip microextraction (PT-μSPE) method for the rapid and concurrent extraction of five of triazole fungicides in fruit and vegetable samples prior to quantitative analysis by high-performance liquid chromatography-ultraviolet. The incorporation of CoFe-PBA@GO with superporous structure and abundant functional groups in a polymer medium improves the extraction efficiency of nanofibers due to hydrogen bonding and π-π interactions formed between analytes and synthesized nano-adsorbent. Various important elements that affect the extraction yield of the target analytes were optimized utilizing a time-variable approach. Under the optimum conditions, dynamic range was attained in the range of 0.3-900.0 ng/mL with correlation coefficients ≥ 0.999. The identification limit of the PT-μSPE-HPLC-UV method ranged from 0.1 to 0.3 ng/mL.

The relative dominance of surface oxygen content over pore properties in controlling adsorption and retrograde behavior of gaseous toluene over microporous carbon

The adsorption potential of activated carbon (AC) derived from macadamia nut shells (product code of Procarb-900: namely, AC-P) has been investigated using gaseous toluene as the target pollutant. The powder AC-P with high-microporosity (96%) and oxygen content (5.62%) exhibited very high adsorption capacity (214 mg·g-1) and partition coefficient (PC: 25 mol·kg-1·Pa-1) against 100 ppm (10 Pa) toluene at 99% breakthrough levels (1 atm dry N2). The factors governing toluene adsorption were explored with respect to the key variables such as surface functional groups, pore size distribution, sorbent bed mass (50, 100, and 150 mg), and particle size (i.e., 0.212-0.6 mm (powder AC: PAC)) vs. 0.6-2.36 mm (granular AC: GAC)). Accordingly, the adsorption process was physical, mainly due to the non-polar interactions (i.e., π-π interactions) between the adsorbent and adsorbate molecules. The high affinity of AC-P at low breakthrough levels was obtained through a combination of smaller particle size (PAC) and larger adsorbent mass (i.e., 150 mg) with the appearance of a very pronounced retrograde phenomenon (e.g., at < 1% breakthrough level). As such, toluene adsorption appeared to be affected more sensitively by particle size and adsorbent mass (especially at low breakthrough levels) than by high microporosity. Most importantly, the oxygen content of AC emerges as one of the key factors governing the maximum capacity, as the changes in pore volume are not crucial to explain the observed adsorption patterns of toluene.

Deep eutectic solvents in sample preparation and determination methods of pesticides: Recent advances and future prospects

This review summarizes recent advances of deep eutectic solvents (DESs) in sample preparation and determination methods of pesticides in food, environmental, and biological matrices since 2019. Emphasis is placed on new DES categories and emerging microextraction techniques. The former incorporate hydrophobic deep eutectic solvents, magnetic deep eutectic solvents, and responsive switchable deep eutectic solvents, while the latter mainly include dispersive liquid-liquid microextraction, liquid-liquid microextraction based on in-situ formation/decomposition of DESs, single drop microextraction, hollow fiber-liquid phase microextraction, and solid-phase microextraction. The principles, applications, advantages, and limitations of these microextraction techniques are presented. Besides, the use of DESs in chromatographic separation, electrochemical biosensors, fluorescent sensors, and surface-enhanced Raman spectroscopy are discussed. This review is expected to provide a valuable reference for extracting and detecting pesticides or other hazardous contaminants in the future.

Fabrication of β-cyclodextrin-polyacrylamide/covalent organic framework hydrogel at room temperature for the efficient removal of triazole fungicides from environmental water

Triazole is frequently-used fungicide, which can leach into surface water through farmland and cause serious environmental pollution. Continuous exposure to triazole fungicides may cause harm to human health. Herein, β-cyclodextrin-polyacrylamide/covalent organic framework (β-CD-PAAM/TFPB-BD) hydrogel was fabricated at room temperature and used for the efficient removal of triazole fungicides. It displayed a short adsorption equilibrium time (50 min) and a total qe of 79.92 mg g-1. The adsorption process for triazole fungicides on β-CD-PAAM/TFPB-BD hydrogel conforms to the pseudo-second-order kinetic model and Freundlich model. The prepared hydrogel was recyclable and resistant to salt, high temperature, acid, and alkali. The reusability of fabricated sorbent can be achieved (i.e., five extraction cycles) for removal of target fungicides. Moreover, the β-CD-PAAM/TFPB-BD hydrogel was successfully applied to remove triazole fungicides in environmental water with removal efficiency ranging from 79.4% to 99.0%.

pH-responsive switchable deep eutectic solvents to mediate pretreatment method for trace analysis of triazole fungicides in peel wastes

The existing QuEChERS-combined analytical pretreatment methods are limited by large reagent consumption, high environmental burden, and mediocre effects. To provide an efficient and green pretreatment method, this study developed pH-responsive switchable deep eutectic solvents (SDESs) to extract triazole fungicides (TFs) from fruit peel wastes, which could enhance the preconcentration effect of target compounds in food waste samples with complex matrices. The mechanisms of pH-induced phase transition and hydrophobicity-hydrophilicity conversion of pH-responsive SDESs were investigated by pH phase diagrams and chemical characterization techniques, respectively. We validated the established method by high-performance liquid chromatography-diode array detector (HPLC-DAD), and lower LOD (0.089-0.351 ng mL^-1), LOQ (0.297-1.172 ng mL^-1), RSD (≤8.8 %) and satisfactory recoveries (90.6 %-110.9 %) and preconcentration factors (389-512) were obtained in rotting grape peel, watermelon peel, and orange peel samples. Our findings highlight the potential of pH-responsive SDESs in the extraction and analysis of various natural food products.

Combination of switchable hydrophilic solvent liquid-liquid microextraction with QuEChERS for trace determination of triazole fungicide pesticides by GC-MS

This work first proposed a novel green and efficient method based on Quick, Easy, Cheap, Efficient, Rugged, and Safe pretreatment (QuEChERS) combined with switchable hydrophilic solvent homogeneous liquid-liquid microextraction (SHS-HLLME) for trace determination of triazole fungicides (TFs) in agricultural products such as vegetables and fruits by gas chromatography-mass spectrometry (GC-MS). N,N-Dimethyl benzylamine was used for the synthesis of SHS. Box-Behnken design was applied for the optimization of extraction conditions and a mathematical model was obtained. Ultimately, 0.50 mL SHS, 1.0 mL 10 mol L^-1 sodium hydroxide, and 45 s ultrasonic time were determined as optimal conditions for the SHS-HLLME method. The limit of detection and limit of quantification determined using the optimal method (SHS-HLLME/GC-MS) were 0.13-0.27 ng mL^-1 and 0.43-0.90 ng mL^-1, respectively. In addition, the SHS-HLLME method under optimal conditions was combined with the traditional QuEChERS method to realize the advancement of the SHS-HLLME method from simple to complex matrix analysis, and the QuEChERS-SHS-HLLME method was successfully applied to the analysis of TFs in cucumbers, tomatoes, watermelon and grapes in agricultural products. Matrix-matched calibration standards were used to improve the accuracy of TFs in spiked cucumber samples to obtain recovery results close to 100%. It was shown that the new method is green and rapid, enabling fast and inexpensive sample pretreatment with up to 100-fold enrichment factor and low detection limit compared with the original QuEChERS method.

Magnetic covalent organic frameworks for rapid solid-phase extraction of phthalate esters and bisphenol A in beverage samples

Phthalate esters (PAEs) and bisphenol A (BPA) are endocrine-disrupting chemicals (EDCs), which are widely used in the production of food plastic packaging and easily migrate to food. Continuous exposure to EDCs may cause harm to human health. Herein, magnetic covalent organic framework TFP-NDA/Fe₃O₄ was synthesized by magnetizing covalent organic framework TFP-NDA through a facile coprecipitation method, and used as an adsorbent for rapid solid-phase extraction of PAEs (diethyl phthalate (DEP), diisobutyl phthalate (DIBP) and dibutyl phthalate (DBP)) and BPA. The extraction equilibrium can be reached within 12 min. By combination with a gas chromatography-flame ionization detector, the limits of detection were 0.7-2.3 μg L^-1 and the linear ranges were 10-500 μg L^-1 for diethyl phthalate (DEP) and 10-1000 μg L^-1 for diisobutyl phthalate (DIBP), dibutyl phthalate (DBP) and BPA with R² > 0.9916. In beverage samples (plastic bottled drinking water, juice and carbonated drink), the developed method was successfully applied to extract and quantify PAEs and BPA with recoveries ranging from 81.7% to 114.2%.

Ultrasound-assisted switchable hydrophilic solvent-based homogeneous liquid-liquid microextraction for the determination of triazole fungicides in environmental water by GC-MS

A new method was developed for the determination of three triazole fungicides in environmental water samples by gas chromatography-mass spectrometry (GC-MS) based on ultrasonic assisted switchable hydrophilic solvent homogeneous liquid-liquid microextraction. As a switchable hydrophilic solvent, N,N-dimethylcyclohexylamine (DMCHA) does not require a dispersant or centrifugation. Ultrasound assistance is helpful to speed up the extraction of target compounds and can reduce the pretreatment time. The entire pretreatment process of this method only takes 5 minutes. Using the Box-Behnken design as the means of optimization, optimal extraction conditions were obtained through a mathematical model. Good linearity was obtained in the range of 5-500 μg L^-1, and the correlation coefficient of target compounds was greater than 0.999. The matrix spiked recoveries were between 81.3% and 111.1% and the detection limit was between 0.46 and 0.99 μg L^-1. Intraday relative standard deviation (n = 3) was 13.0-13.9% at 100 μg L^-1. Finally, it was concluded that the method is a rapid, efficient and simple method for the analysis of triazole fungicides in water.