Eco-friendly magnetic Solid-Phase extraction and deep eutectic solvent for the separation and detection of parabens from the environmental water and urine samples

Profiling metabolites and exploring metabolism of parabens in human urine using non-target screening and molecular networking

Parabens are widely used as preservatives in food, pharmaceuticals, and cosmetics due to their excellent antimicrobial activities, cost-effectiveness, and stability. Previous studies have demonstrated their harmful potential and ubiquity in the environment and human tissues. This study revealed profiles of parabens and their metabolites in urine samples from a general population of different ages in China using non-target screening. Metabolism of parabens in human bodies was further explored through the identified metabolites in combination of molecular networking. A total of 34 paraben compounds were screened in the urine samples. In addition to 3 identified confidence level 1 (CL1) parent parabens, 3 CL2 compounds were also identified, namely 4-hydroxybenzoic acid, 3,4-dihydroxybenzoic acid, and ethylparaben sulfate. Furthermore, 6 CL3 compounds were tentatively identified, five of which were sulfonated and sulfated metabolites of parabens. The remaining 22 were CL4 features without certain chemical structures. Hazardousness assessment suggested toxic potential of the identified metabolites. Distribution of the parabens and metabolites in the urines showed age-dependent differences. Sulfonation and sulfation were potentially significant metabolic pathways of the parabens in human bodies. This study provides a new insight into understanding metabolism of parabens in human bodies and potential risks of human exposure to parabens.

Review of the Integrated Approaches for Monitoring and Treating Parabens in Water Matrices

Due to their antibacterial and antifungal properties, parabens are commonly used as biocides and preservatives in food, cosmetics, and pharmaceuticals. Parabens have been reported to exist in various water matrices at low concentrations, which renders the need for sample preparation before their quantification using analytical techniques. Thus, sample preparation methods such as solid-phase extraction (SPE), rotating-disk sorptive extraction (RDSE), and vortex-assisted dispersive liquid-liquid extraction (VA-DLLE) that are commonly used for parabens extraction and preconcentration have been discussed. As a result of sample preparation methods, analytical techniques now detect parabens at trace levels ranging from µg/L to ng/L. These compounds have been detected in water, air, soil, and human tissues. While the full impact of parabens on human health and ecosystems is still being debated in the scientific community, it is widely recognized that parabens can act as endocrine disruptors. Furthermore, some studies have suggested that parabens may have carcinogenic effects. The presence of parabens in the environment is primarily due to wastewater discharges, which result in widespread contamination and their concentrations increased during the COVID-19 pandemic waves. Neglecting the presence of parabens in water exposes humans to these compounds through contaminated food and drinking water. Although there are reviews that focus on the occurrence, fate, and behavior of parabens in the environment, they frequently overlook critical aspects such as removal methods, policy development, and regulatory frameworks. Addressing this gap, the effective treatment of parabens in water relies on combined approaches that address both cost and operational challenges. Membrane filtration methods, such as nanofiltration (NF) and reverse osmosis (RO), demonstrate high efficacy but are hindered by maintenance and energy costs due to extensive fouling. Innovations in anti-fouling and energy efficiency, coupled with pre-treatment methods like adsorption, help mitigate these costs and enhance scalability. Furthermore, combining adsorption with advanced oxidation processes (AOPs) or biological treatments significantly improves economic and energy efficiency. Integrating systems like O₃/UV with activated carbon, along with byproduct recovery strategies, further advances circular economy goals by minimizing waste and resource use. This review provides a thorough overview of paraben monitoring in wastewater, current treatment techniques, and the regulatory policies that govern their presence. Furthermore, it provides perspectives that are critical for future scientific investigations and shaping policies aimed at mitigating the risks of parabens in drinking water.

Effect of pH on UV/H2O2-mediated removal of single, mixed and halogenated parabens from water

Adjusting pH values in aqueous environments can significantly improve the efficiency by which parabens and halo-parabens are removed. In this study, 20 neutral and deprotonated species were selected as models to investigate their pH-dependent removal mechanisms and kinetics by a UV/H2O2 process using density functional theory (DFT). Compared to neutral species, deprotonated species exhibit higher reactivity to HO• due to their high electron cloud density. H atom abstraction (HAA) reactions on the substitution groups are the most favorable pathways for neutral species, while radical adduct formation (RAF) reactions are the most favorable for deprotonated species. Single electron transfer (SET) reactions can be neglected for neutral species, while these reactions become a viable route for deprotonated molecules. The total reaction rate constants range from 1.63 × 109 to 3.74 × 1010 M- 1 s- 1 at pH 7.0, confirming the experimental results. Neutral and weakly alkaline conditions are favorable for the degradation of MeP and halo-parabens in the UV/H2O2 process. The order of removal efficiency at optimum pH is dihalo-parabens > mono-halo-parabens ≈ F, F-MeP > MeP. Furthermore, the transformation products must undergo oxidative degradation due to their high toxicity. Our findings provide new insights into the removal of parabens and their halogenated derivatives from wastewater.

Magnetic solid phase extraction coupled to HPLC-UV for highly sensitive analysis of mono-hydroxy polycyclic aromatic hydrocarbons in urine

BACKGROUND

As a common pollutant, the carcinogenic properties of polycyclic aromatic hydrocarbons have garnered considerable attention. Trace metabolites of polycyclic aromatic hydrocarbons can be detected in urine as a non-invasively approach to monitor the exposure level. Nonetheless, the urine samples have the disadvantages of being large in volume and containing numerous impurities. Given the growing demand to study metabolites with low abundance and potential biomarkers, there is a pressing need for a preconcentration and high-throughput technique for effectively handling complex liquid samples.

RESULTS

Polystyrene-coated magnetic nanoparticles were used to establish a novel magnetic extraction method for monohydroxy polycyclic aromatic hydrocarbons in urine samples. Polystyrene magnetic nanoparticles are an ideal absorbent for solid-phase extraction. After the material was mixed with the sample and adsorbed the target analyte, the analytes on the material were eluted and quantified using high-performance liquid chromatography. Influencing factors were optimized, and the proposed method achieved desirable sensitivity in analyzing low-abundance metabolites in large volumes of complex urine samples. The recoveries of intra-day and inter-day were 78.0-118.0 % and 81.0 %-115.0 %, respectively. The intra-day and inter-day reproducibility were less than 4.5 % and 8.6 %, respectively. The limits of detection were in the range of 0.009-0.041 ng mL-1, and the limits of quantification were in the range of 0.030-0.135 ng mL-1.

SIGNIFICANCE AND NOVELTY

The application of reusable polystyrene-coated magnetic solid-phase nanoparticles as adsorbents makes the extraction of monohydroxy polycyclic aromatic hydrocarbons from urine samples economical and environmentally benign. The proposed method is simple, sensitive, and efficient compared to existing techniques. The nanoparticles are easy to prepare, showing potential for rapid screening of complex bulk bio-samples in batches with high efficiency and low budget.

A hydrophobic deep eutectic solvent-based vortex-assisted liquid-liquid microextraction applied for doping control of aromatase inhibitors from equine urine

Aromatase inhibitors (AIs) can indirectly cause increased testosterone in animals, which leads to the improvement of the athletic ability of horses. For the protection of horses and the consideration of fair competition, AIs were listed as prohibited drugs by the Federation Equestre Internationale (FEI). There were several disadvantages using traditional pretreatment methods before analyzing these drugs from biological samples. A rapid and green pretreatment method has been developed by utilizing the hydrophobic deep eutectic solvent (DES)-based vortex-assisted liquid-liquid microextraction (DES-VALLME) followed by ultra-high performance liquid chromatography tandem triple-quadrupole mass spectrometry (UHPLC-MS/MS) technique for the efficient extraction and sensitive detection of AIs in equine urine samples. The combination of menthol and 4-fluorophenol in a molar ratio 1:4 was chosen as the optimum composition of DES for extracting AIs. Under the optimum conditions, only 80 μL of DES, 1 mL equine urine and 2 min were expended. An external standard calibration method was utilized for determination, and a linear relationship was achieved with a concentration range of 0.02-4000 ng mL-1 (r2 ≥ 0.9983). The limits of detection of the method based on a signal-to-noise ratio of 3 were 0.01-4 ng mL-1. The accuracy recoveries ranged from 94.9% to 113.4% within the intra-day and inter-day relative standard deviations of less than 9.1%. Compared with traditional extraction methods, the DES-VALLME method had the advantages of rapidity, simplicity, efficiency, low toxicity, and low cost. This method has potential and possessed brilliant prospects for doping control.

Validation of a Novel RP-HPLC Technique for Simultaneous Estimation of Lignocaine Hydrochloride and Tibezonium Iodide: Greenness Estimation Using AGREE Penalties

Herein, we reported an HPLC method for the simultaneous determination of tibezonium iodide (TBN) and lignocaine hydrochloride (LGN). The method was developed according to the International Conference for Harmonization guidelines (ICH) Q2R1 using Agilent^® 1260 with a mobile phase consisting of acetonitrile and phosphate buffer (pH 4.5) in a volumetric ratio of 70:30 and flowing through a C₈ Agilent^® column at 1 mL/min. The results revealed that TBN and LGN peaks were isolated at 4.20 and 2.33 min, respectively, with a resolution of 2.59. The accuracy of TBN and LGN was calculated to be 100.01 ± 1.72% and 99.05 ± 0.65% at 100% concentration, respectively. Similarly, the respective precision was 100.03 ± 1.61% and 99.05 ± 0.48%. The repeatability for TBN and LGN was found to be 99.05 ± 0.48% and 99.19 ± 1.72%, respectively, indicating that the method was precise. The respective regression co-efficient (r²) for TBN and LGN was found to be 0.9995 and 0.9992. Moreover, the LOD and LOQ values for TBN were 0.012 and 0.037 µg/mL, respectively, while for LGN, they were 0.115 and 0.384 µg/mL, respectively. The calculated greenness of the method for ecological safety was found to be 0.83, depicting a green contour on the AGREE scale. No interfering peaks were found when the analyte was estimated in dosage form and in volunteers' saliva, depicting the specificity of the method. Conclusively, a robust, fast, accurate, precise and specific method was successfully validated to estimate TBN and LGN.

Room temperature fabrication of magnetic covalent organic frameworks for efficient enrichment of parabens in water

A novel 4 + 2 covalent magnetic organic framework (COF) with core-shell structure was synthesized for the first time with N, N, N', N'-Tetrakis (4-aminophenyl)-1, 4- benzenediamine (TPDA) and 2, 6-Pyridinedicarboxaldehyde (PCBA) at room temperature. The synthesized magnetic TPDA-PCBA-COF has a large specific surface area and superparamagnetism, which makes it an ideal sorbent for trace analytes enrichment. To this end, we combined it with magnetic solid phase extraction (MSPE) to enrich trace parabens in environmental water. The parameters affecting the enrichment efficiency of magnetic solid phase extraction, such as the amount of Fe₃O₄@TPDA-PCBA-COF, extraction time, pH of samples, salt concentration, desorption solvent volume and desorption time, were optimized. A simple method for extraction and determination of parabens in water samples by MSPE combined with high performance liquid chromatography (HPLC) was established under optimized conditions. The validation results revealed that the linear ranges were at 1.0-5.0 × 10² ng mL^-1 with R value between 0.9915 and 0.9999, the spiked recoveries were in the range of 82.8% to 99.9% and RSDs were lower than 10%. The method was further applied to the determination of parabens in water samples, with recoveries in the range of 82.2% to 110.0% and RSDs ≤ 7.7%. These results suggest that the magnetic TPDA-PCBA-COF could be used as a promising adsorbent for efficient extraction and quantitation of parabens in environmental water samples.

[Analysis of parabens in environmental water samples by covalent organic framework-based magnetic solid-phase extraction-high performance liquid chromatography]

Parabens are a class of antimicrobial preservatives that are widely used in cosmetics, pharmaceuticals, and food products because of their ease of production, antimicrobial effect, and low price. The widespread use of these parabens, poses potential risks to human health. Therefore, it is necessary to establish a simple and rapid method for the detection of parabens. The large number of substrate interferences in complex samples is an important factor affecting the sensitivity of analytical methods. Magnetic solid-phase extraction (MSPE) has received much attention because of its advantages of easy operation, short extraction time, small sample amount, low cost, and environmental friendliness. Covalent organic frameworks (COFs) with high crystallinity, high specific surface area, adjustable pore size, regular porosity, as well as high chemical and thermal stability are now widely used in separation and analysis. Therefore, a sample pretreatment method combining MSPE and COF for the analysis of parabens in complex matrices is very promising. A magnetic covalent organic framework, Fe₃O₄@TbBd, was successfully synthesized by the Schiff base reaction of 1,3,5-triformylbenzene (Tb) and benzidine (Bd) at room temperature using Fe₃O₄ nanoparticles as magnetic cores. Characterization by scanning electron microscopy (SEM), thermogravimetric analysis (TGA), X-ray diffraction (XRD), vibrating sample magnetometer (VSM) measurements, etc. revealed that the magnetic COF has high magnetic responsiveness, as well as good thermal and chemical stability, which make it an ideal adsorbent for the MSPE of parabens. Some factors related to the extraction efficiency, including the amount of adsorbent, extraction time, pH, desorption solvent, desorption time, and number of desorption were systematically investigated. A method involving MSPE and high performance liquid chromatography-ultraviolet detection (HPLC-UV) based on the Fe₃O₄@TbBd was developed for the determination of four parabens (ethylparaben, propylparaben, butylparaben, and benzylparaben) in environmental water samples. Under the optimal extraction conditions, the method showed good linearities. The limits of detection and limits of quantification were 0.2-0.4 μg/L and 0.7-1.4 μg/L for the four analytes, respectively. The recoveries at three spiked levels were in the range of 86.1%-110.8% with intra-day and inter-day RSDs of less than 5.5% and 4.9%, respectively. The method was successfully applied to the determination of parabens in East Lake water, Yangtze water, and domestic wastewater. Ethyl paraben and propyl paraben were detected in domestic wastewater at the levels of 1.8 μg/L and 0.4 μg/L, respectively. The recoveries of the parabens at different spiked levels ranged from 80.7% to 117.5%, with RSDs of 0.2%-8.8%. The method has good potential for the determination of parabens in environmental water samples because of its operational simplicity, short extraction time, high sensitivity, and environmental friendliness.