Deep eutectic solvent (DES) based dispersive Liquid-Phase microextraction of Sunset yellow FCF in food and pharmaceutical products

Recent Advances in Dispersive Liquid-Liquid Microextraction for Pharmaceutical Analysis

Sample clean-up and pre-concentration are critical components of pharmaceutical analysis. The dispersive liquid-liquid microextraction (DLLME) technique is widely recognized as the most effective approach for enhancing overall detection sensitivity. While various DLLME modes have been advanced in pharmaceutical analysis, there need to be more discussions on pre-concentration techniques specifically developed for this field. This review presents a comprehensive overview of the different DLLME modes used in pharmaceutical analysis from 2017 to May 2023. The review covers the principles of DLLME, the factors affecting microextraction, the selected applications of different DLLME modes, and their advantages and disadvantages. Additionally, it focuses on multi-extraction strategies employed for pharmaceutical analysis.

dl-carnitine-based green hydrophobic deep eutectic solvent for the enrichment of bisphenol A in mineral water based on ultrasound-assisted liquid-phase microextraction

A powerful pretreatment technique, ultrasound-assisted dispersive liquid-phase microextraction (USA-DLPME) based on dl-Carnitine-based deep eutectic solvent (DES), has been developed to efficiently enrichment of bisphenol A from mineral water samples. The DES-based USA-DLPME technique demonstrated superior extraction efficiency for bisphenol A compared to established organic solvent-based liquid-liquid extraction techniques. The conditions for the extraction of bisphenol A were predicted using the response surface methodology. The effects of pH (A: 2-10), NaCl concentration (B: 0.2-1.0%w/v), DES volume (C: 30-150 μL), and sonication time (D: 1-5 min) were examined using an experimental design. The extraction recovery of Bisphenol A under optimum conditions was achieved at 99.897% (A = 8, B = 0.4%w/v, C = 120 μL, and D = 5 min). Under these conditions, a wide linear range of 1-600 ng mL-1, an enrichment factor of 81.52, a low detection limit of 0.26 ng mL-1 and a limit of quantification of 0.87 ng mL-1 were obtained. Lastly, the proposed technique was used to accurately and reliably identify bisphenol A in various mineral water samples, yielding relative recoveries in the 92-96% range with RSD≤3%. These findings imply that DESs can be widely and successfully used to extract chemicals from actual materials. DESs are a class of innovative green solvents with the potential to replace organic solvents.

Metal-organic framework functionalized with deep eutectic solvent for solid-phase extraction of Rhodamine 6G in water and cosmetic products

An NH2 -MIL-53(Al)-DES(ChCl-Urea) nanocomposite was synthesized for extraction and determination of Rhodamine (Rh) 6G from environmental and cosmetic samples. The deep eutectic solvent (DES) was prepared by mixing choline chloride and urea in a mole ratio of 1:2. NH2 -MIL-53(Al)-DES(ChCl-Urea) nanocomposite was synthesized using the impregnation method at a ratio of 60:40 (w/w). The optimum conditions were determined after NH2 -MIL-53(Al)-DES(ChCl-Urea) characterization was performed. The optimum conditions were determined as pH 8, adsorbent amount of 15 mg, total adsorption-desorption time of 6 min, and enrichment factor of 20. The recovery values of the solid-phase extraction method for water and cosmetic samples under optimum conditions were between 95% and 106%. NH2 -MIL-53(Al)-DES(ChCl-Urea) nanocomposite was an economically advantageous adsorbent because of its reusability of 15 times. All analyses were performed using the ultraviolet-visible spectrophotometer. The linear range, limit of detection, and limit of quantification of the method were 100-1000, 9.80, and 32.68 μg/L, respectively. The obtained results showed that the synthesized nanocomposite is a suitable adsorbent for the determination of Rh 6G in water and cosmetic samples. The real sample applications were verified with the high-performance liquid chromatography system.

Application of instantaneous nebulization dispersive liquid-phase microextraction combined with HPLC for the determination of chalcone and isoflavone in traditional Chinese medicines

A simple and rapid instantaneous nebulization dispersive liquid-phase microextraction method was developed, and combined with high-performance liquid chromatography for determination of the contents of seven analytes in traditional Chinese medicines. In this study, using the sprinkler device to achieve instantaneous synchronous dispersion and extraction, only one spray can rapidly achieve the concentration and enrichment of seven kinds of chalcone and isoflavones. The key factors affecting the extraction efficiency were optimized including the type and volume of extractant, the pH and salt concentration of the sample phase, and the number of dispersion. Under the optimal conditions, the enrichment factor of the target analytes ranged from 103.1 to 180.9, with good linearity and correlation coefficients above 0.9970. The limits of detection ranged from 0.02 to 0.15 ng/mL, with good accuracy (recoveries 91.1 to 108.9%) and precision (relative standard deviations 1.5-7.1%). This method has short extraction time (2 s), low organic solvent consumption and high enrichment effect, so it has a wide application prospects.

Deep eutectic solvents with low viscosity for automation of liquid-phase microextraction based on lab-in-syringe system: Separation of Sudan dyes

In the work limitations of deep eutectic solvents in the flow-based analysis are discussed. Deep eutectic solvents based on terpenes and fatty acids with low viscosity were studied as extraction solvents for liquid-liquid microextraction into a lab-in-syringe system for the first time. As a result an automated deep eutectic solvent-based microextraction approach was proposed. The procedure involved aspiration of deep eutectic solvent (based on terpene and fatty acid) and aqueous sample solution followed by phases mixing by a magnetic stirrer inside a syringe of flow system. After phase separation the extract phase was transferred from the syringe into a vial followed by analysis by a high-performance liquid chromatography with diode-array detection. The determination of Sudan I, Sudan II and Sudan III in chili-based sauces was considered as an analytical task. The mass-transfer intensification performed by the magnetic stirring inside the syringe allowed to perform fast (2 min) and efficient (extraction recoveries 87-95%) extraction. The limits of detection, calculated from a blank test based on 3σ, were from 0.003 to 0.005 mg kg^-1, RSD was <9%. The microextraction procedure did not involve the use of hazardous organic solvents, only 100 μL of natural deep eutectic solvent was required for dyes preconcentration.

Biomimetic Electrochemical Sensors Based on Core-Shell Imprinted Polymers for Targeted Sunset Yellow Estimation in Environmental Samples

Magnetic molecularly imprinted polymers (MMIPs) contain the predesigned specialized recognition capability that can be chosen to build credible functional materials, that are easy to handle and have a good degree of specificity. Hence, the given piece of work is intended to design a novel electrochemical sensor incorporating magnetite-based molecularly imprinted polymers. The building materials consisted of a cross-linker (EGDMA), reaction-initiator (AIBN), monomer (methylene succinic acid-MSA), and template molecule (Sunset Yellow-SY dye). MMIPs exhibited a diameter of 57 nm with an irregular shape due to the presence of cavities based on SEM analysis. XRD patterns exhibited crystallinity, as well as amorphous peaks that are attributed to polymeric and non-polymeric frameworks of MMIPs. The crystallite size of the MMIPs from XRD analysis was found to be 16.28 nm based on the Debye-Scherrer's equation. Meanwhile, the FTIR bands showed the synthesis of MMIPs using monomer and methylene succinic acid. The sorption data at the optimized operating conditions (pH 2, sorbent dosage 3 mg, time 18 min) showed the highest sorption capacity of 40 mg/g. The obtained data best fitted to the Langmuir sorption isotherm and followed the pseudo-second-order kinetics. The magneto-sensors were applied for ultrasensitive, rapid, and simple sensing of SY dye. The electrochemical experiments were run at the operating condition range of (scan rate 10-50 mV/s, tads 0-120 s, pH 5-9, potential range 1-1.5 V for CV and 1-1.3 V for SWAdASV). The linear range of detection was set to 1.51 × 10^-6 M to 1.51 × 10^-6 M posing LOD and LOQ values of 8.6242 × 10^-5 M and 0.0002874 M, respectively. The regression analysis value for the calibration was found to be 0.950. Additionally, high adsorption efficiency, selectivity, reusability, and strong structural stability of the magneto-sensors showed potential use for SY detection in real samples. These characteristics make MMIPs a viable electrochemical substrate for the detection of chemical contaminants in the environment and in health-related products.