An experimental and modelling study of water vapour adsorption on SBA-15

Hierarchical Silica Composites for Enhanced Water Adsorption at Low Humidity

To combat water scarcity in remote areas around the world, adsorption-based atmospheric water harvesting (AWH) has been proposed as a technology that can be used alongside existing water production capabilities. However, commonly used adsorbents either have low water adsorption loadings or are difficult to regenerate. In this work, we developed two novel hierarchical silica-salt composites that both exhibit high water adsorption loadings under dry and humid conditions. The total water vapor loading, kinetics, and heats of water adsorption for both silica-salt composites were investigated. As hierarchical silicas have tunable pores and large pore volumes, these materials serve as effective host matrixes for the hygroscopic salt LiCl. Our results suggest that hierarchical pores play a significant role in water adsorption: micropores and some smaller mesopores act as "storage" sites for hygroscopic salt, whereas larger mesopores and macropores increase the accessibility of water vapor into the silica. Using this mix of pores, we achieved greater than 0.4 g H2O/g composite at 10% RH and 27 °C. Additionally, we found that the salt-impregnated silica and bare silica had the same heat of adsorption: 80-90 kJ/mol. The results suggest that the H-bond interactions are similar for both systems and that the primary mechanism at play here is water cluster adsorption/desorption. Despite the similar energies, the LiCl-containing materials exhibited considerably slower kinetics than bare silica materials. Of equal importance to the adsorption capacity and kinetics of these composites is their mechanical stability. To assess their mechanical stability, high-energy ball milling of silica was conducted to create more uniform particle sizes. However, reduced particle sizes came at a cost─the BET surface areas and pore volumes were drastically decreased after more than 1 h of ball milling. Findings from this study suggest that short-term ball milling may be a viable large-scale option to reduce particle size in silica materials without sacrificing significant performance.

Equilibrium and hysteresis formation of water vapor adsorption on microporous adsorbents: Effect of adsorbent properties and temperature

Water vapor has been one of the vital problems in purification of volatile organic compounds. In this study, the adsorption-desorption equilibrium of water vapor were conducted at 298, 308, 318, and 328 K on three adsorbents: hypercrosslinked polymeric adsorbents (HPA), activated carbon fiber (ACF) and granular activated carbon (GAC). The obtained isotherms were type V and the adsorption capacity at the same condition was: GAC>ACF>HPA. cluster formation induced micropore filling (CIMF) model was adopted to fit the adsorption isotherms and the fitting parameters showed that adsorption capacities of water vapor on micropores and functional groups had a negative logarithmic linear relationship with temperature. The existence of functional groups could weaken the negative influence of temperature on the water adsorption performance, while the influence of temperature had negligible relationship with microporous volume. The hysteresis loops at different temperatures on three adsorbents had similar shape, the size of which were also: GAC>ACF>HPA. They mainly occurred in micropore adsorption, but their size had positive relationships with both functional groups and microporous volume. The hysteresis became smaller along with the increase of temperature, closely related with the stability of water clusters. In conclusion, temperature, functional groups and porous structure played crucial roles for water vapor adsorption and the formation of hysteresis.Implications: Water vapor is one of the vital influence for VOCs recovery, so studying the adsorption mechanism of water vapor is important to weaken its negative effect. Adsorption capacities of water vapor on both micropores and functional groups had a negative logarithmic linear relationship with temperature. The existence of functional groups could weaken the negative influence of temperature on the water adsorption performance, while the influence of temperature had negligible relationship with microporous volume. The hysteresis loops on three adsorbents mainly occurred in micropore adsorption, but their size had positive relationships with both functional groups and microporous volume.

Impact of Geometrical Disorder on Phase Equilibria of Fluids and Solids Confined in Mesoporous Materials

Porous solids used in practical applications often possess structural disorder over broad length scales. This disorder strongly affects different properties of the substances confined in their pore spaces. Quantifying structural disorder and correlating it with the physical properties of confined matter is thus a necessary step toward the rational use of porous solids in practical applications and process optimization. The present work focuses on recent advances made in the understanding of correlations between the phase state and geometric disorder in nanoporous solids. We overview the recently developed statistical theory for phase transitions in a minimalistic model of disordered pore networks: linear chains of pores with statistical disorder. By correlating its predictions with various experimental observations, we show that this model gives notable insight into collective phenomena in phase-transition processes in disordered materials and is capable of explaining self-consistently the majority of the experimental results obtained for gas-liquid and solid-liquid equilibria in mesoporous solids. The potentials of the theory for improving the gas sorption and thermoporometry characterization of porous materials are discussed.