A microscope configuration for nanometer 3-D movement monitoring accuracy

Spatially Multiplexed Speckle on 1D Sensors for High-Speed 2D Sensing Applications

Speckle pattern-based remote vibration monitoring has recently become increasingly valuable in industrial, commercial, and medical applications. The dynamic and random nature of speckle patterns offers practical applications for imaging and measurement systems. The speckle pattern is an interference pattern generated by light scattered from a rough surface onto a remote plane. It is typically sensed using area scan cameras (2D), which are limited to framerates of 2-4 kHz and can only capture a small region of interest (ROI). In this work, we propose a technique that enables the capture of synthetic 2D speckle patterns using a 1D high-acquisition-rate sensor and a diffractive optical element (DOE) to produce image replicas. The multiple replicas are scanned by the 1D sensor simultaneously at different spatial positions. This method provides an ability to sense remote vibrations in all directions, contrary to the case with a simple 1D sensing system.

All Optical Speckle Contrast-Based Vibration Sensor for Photoacoustic Signal Detection

Remote detection of photoacoustic signals is a well desired ability, enabling to perform advanced imaging in scenarios where contact is not possible. Various unique solutions have been suggested, including a camera-based speckle contrast photoacoustic detection. In this manuscript, a significant upgrade to the camera-based speckle contrast approach is presented and experimentally demonstrated. This solution is based on all-optical vibration sensing setup. The technique is based on spectral estimation of speckle pattern contrast and relies on several pre-developed works. First, it relies on the suggested application of speckle contrast to vibration sensing, and then on the realization of intensity pattern spectral manipulation, using a shearing interferometer. The method is evaluated and compared to traditional contrast estimation, and demonstrated in several applications in various vibration frequency band such as photoacoustic signal analysis and phonocardiographic heart sounds. The method is also applicable to measuring contrast changes due to a general speckle changing behavior, rather than surface vibration alone.

Single wavelength measurements of absorption coefficients based on iso-pathlength point

In optical sensing, to reveal the chemical composition of tissues, the main challenge is isolating absorption from scattering. Most techniques use multiple wavelengths, which adds an error due to the optical pathlength differences. We suggest using a unique measurement angle for cylindrical tissues, the iso-pathlength (IPL) point, which depends on tissue geometry only (specifically the effective radius). We present a method for absorption assessment from a single wavelength at multiple measurement angles. The IPL point presented similar optical pathlengths for different tissues, both in simulation and experiments, hence it is optimal. Finally, in vivo measurements validated our proposed method.

Non-contact photoacoustic imaging using laser speckle contrast analysis

A novel method for non-contact and continuous detection of photoacoustic signals is presented and experimentally demonstrated. The approach is based on analysis of the contrast of time-varying speckle patterns, and suggests a more robust alternative in respect to interferometric and refractometric available solutions.

Pathogen Detection Using Frequency Domain Fluorescent Lifetime Measurements

OBJECTIVE

Inflammation of the meninges is a source of severe morbidity and therefore is an important health concerns worldwide. The conventional clinical microbiology approaches used today to identify pathogens suffer from several drawbacks and frequently provide false results. This research describes a fast method to detect the presence of pathogens using the frequency domain (FD) fluorescence lifetime (FLT) imaging microscopy (FLIM) system.

METHODS

The study included 43 individuals divided into 4 groups: 9 diagnosed with different types of bacteria; 16 diagnosed with different types of viruses; 5 healthy samples served as a control; and 12 samples were negative to any pathogen, although presenting related symptoms. All samples contained leukocytes that were extracted from the cerebrospinal fluid (CSF) and were subjected to nuclear staining by 4', 6-diamidino-2-phenylindole (DAPI) and FLT analyses based on phase and amplitude crossing point (CRPO).

RESULTS

Using notched boxplots, we found differences in 95% probability between the first three groups through different notch ranges (NR). Pathogen samples presented a longer median FLT (3.28 ns with NR of 3.24-3.32 ns in bacteria and 3.18 ns with NR of 3.16-3.21 ns in viruses) compared to the control median FLT (2.65 ns with NR of 2.63-2.67 ns). Furthermore, we found that the undetected forth group was divided into two types: a relatively normal median FLT (2.72 ns with NR of 2.68-2.76 ns) and a prolonged FLT (3.22 ns with NR of 3.17-3.27 ns).

CONCLUSION

FLT measurements can differentiate between control and pathogen by the CRPO method.

SIGNIFICANCE

The FD-FLIM system can provide a high throughput diagnostic technique that does not require a physician.

Non-labeled lensless micro-endoscopic approach for cellular imaging through highly scattering media

We describe an imaging approach based on an optical setup made up of a miniature, lensless, minimally invasive endoscope scanning a sample and matching post processing techniques that enable enhanced imaging capabilities. The two main scopes of this article are that this approach enables imaging beyond highly scattering medium and increases the resolution and signal to noise levels reaching single cell imaging. Our approach has more advantages over ordinary endoscope setups and other imaging techniques. It is not mechanically limited by a lens, the stable but flexible fiber can acquire images over long time periods (unlike current imaging methods such as OCT etc.), and the imaging can be obtained at a certain working distance above the surface, without interference to the imaged object. Fast overlapping scans enlarge the region of interest, enhance signal to noise levels and can also accommodate post-processing, super-resolution algorithms. Here we present that due to the setup properties, the overlapping scans also lead to dramatic enhancement of non-scattered signal to scattered noise. This enables imaging through highly scattering medium. We discuss results obtained from in vitro investigation of weak signals of ARPE cells, rat retina, and scattered signals from polydimethylsiloxane (PDMS) microchannels filled with hemoglobin and covered by intralipids consequently mimicking blood capillaries and the epidermis of human skin. The development of minimally invasive procedures and methodologies for imaging through scattering medium such as tissues can vastly enhance biomedical diagnostic capabilities for imaging internal organs. We thereby propose that our method may be used for such tasks in vivo.

Optical-tweezing-based linear-optics nanoscopy

Previous works reported that linear optics could be used to observe sub-wavelength features with a conventional optical microscope. Yet, the ability to reach a sub-200 nm resolution with a visible light remains limited. We present a novel widely-applicable method, where particle trapping is employed to overcome this limit. The combination of the light scattered by the sample and by the trapped particles encodes super-resolution information, which we decode by post image processing, with the trapped particle locations predetermined. As the first proof of concept our method successfully resolved sample characteristic features down to 100 nm. Improved performance is achieved with the fluorescence of the trapped particles employed. Further improvement may be attained with trapped particles of a smaller size.

"Beating speckles" via electrically-induced vibrations of Au nanorods embedded in sol-gel

Generation of macroscopic phenomena through manipulating nano-scale properties of materials is among the most fundamental goals of nanotechnology research. We demonstrate cooperative “speckle beats” induced through electric-field modulation of gold (Au) nanorods embedded in a transparent sol-gel host. Specifically, we show that placing the Au nanorod/sol-gel matrix in an alternating current (AC) field gives rise to dramatic modulation of incident light scattered from the material. The speckle light patterns take form of “beats”, for which the amplitude and frequency are directly correlated with the voltage and frequency, respectively, of the applied AC field. The data indicate that the speckle beats arise from localized vibrations of the gel-embedded Au nanorods, induced through the interactions between the AC field and the electrostatically-charged nanorods. This phenomenon opens the way for new means of investigating nanoparticles in constrained environments. Applications in electro-optical devices, such as optical modulators, movable lenses, and others are also envisaged.

Use of PC mouse components for continuous measuring of human heartbeat

A new technology for remote measuring of vibration sources was recently developed for industrial, medical, and security-related applications [Int. Appl. Patent No: PCT/IL2008/001008]. It requires relatively expensive equipment, such as high-speed complementary metal oxide semiconductor (CMOS) sensors and customized optics. In this paper, we demonstrate how the usage of a simple personal computer (PC) mouse as an optical system composed of a low-power laser and a CMOS circuitry on the same integrated circuit package, can be used to monitor heartbeat from the wrist. The method is based on modifying the mouse optical system in such a way that it will recognize temporal change in skin's vibration profile, generated due to the heart pulses, as mouse movement. The tests that were carried out show a very good correlation between the heartbeat rate measured from human skin and the reference values taken manually.

Toward fast malaria detection by secondary speckle sensing microscopy

Diagnosis of malaria must be rapid, accurate, simple to use, portable and low cost, as suggested by the World Health Organization (WHO). Despite recent efforts, the gold standard remains the light microscopy of a stained blood film. This method can detect low parasitemia and identify different species of Plasmodium. However, it is time consuming, it requires well trained microscopist and good instrumentation to minimize misinterpretation, thus the costs are considerable. Moreover, the equipment cannot be easily transported and installed. In this paper we propose a new technique named "secondary speckle sensing microscopy" (S(3)M) based upon extraction of correlation based statistics of speckle patterns generated while illuminating red blood cells with a laser and inspecting them under a microscope. Then, using fuzzy logic ruling and principle component analysis, good quality of separation between healthy and infected red blood cells was demonstrated in preliminary experiments. The proposed technique can be used for automated high rate detection of malaria infected red blood cells.