Automated methods for multiplexed pathogen detection

Rapid, Sensitive, and Selective Quantification of Bacillus cereus Spores Using xMAP Technology

Bacillus cereus is a spore-forming ubiquitous bacterium notable as a food poisoning agent. Detection of B. cereus spores using selective media is laborious and non-specific. Herein, the quantitative detection of B. cereus spores was investigated with commercial antibodies and published aptamer sequences. Several detection reagents were screened for affinity to Bacillus collagen-like protein A (BclA), an abundant exosporium glycoprotein. Sensitivity and selectivity toward B. cereus spores were tested using immunoassays and multi-analyte profiling (xMAP). A recombinant antibody developed in llama against BclA protein showed B. cereus spore selectivity and sensitivity between 10² and 10⁵ spores/mL using xMAP. DNA aptamer sequences demonstrated sensitivity from 10³ to 10⁷ spores/mL and no cross-reaction to B. megaterium and B. subtilis. Selectivity for B. cereus spores was also demonstrated in a mixture of several diverse microorganisms and within a food sample with no compromise of sensitivity. As proof of concept for multiplexed measurement of human pathogens, B. cereus and three other microorganisms, E. coli, P. aeruginosa, and S. cerevisiae, were simultaneously detected using xMAP. These data support the development of a rapid, sensitive, and selective system for quantitation of B. cereus spores and multiplexed monitoring of human pathogens in complex matrices.

Strategies for capturing Bacillus thuringiensis spores on surfaces of (001) GaAs-based biosensors

Bacillus thuringiensis (Bt) is used as a bioinsecticide since it effectively kills insect larvae. Bt is also genetically similar to Bacillus cereus (Bc), a well recognized foodborne human pathogen; they are both members of the Bacillus cereus group (BC group). Although approved Bt bioinsecticide products have been confirmed to be non-pathogenic to humans, close monitoring of Bt during dissemination is important for cost considerations and to limit impact on biodiversity towards nontarget organisms. As such, developing rapid, sensitive, and specific tools for quantitative detection of Bt spores during and following spray operations is highly desirable. The goals of this study were to investigate commercially available detection reagents for sensitivity and selectivity in detecting Bt spores, and then functionalize a surface of (001) GaAs used in photonic biosensing. To achieve these goals, we (1) screened commercial antibodies for their capacity to bind recombinant proteins from Bt spores, (2) screened antibodies and aptamers for their sensitivity and selectivity against Bt spores, and (3) tested the efficiency of selected antibodies and aptamers in capturing Bt spores on the surface of functionalized GaAs biochips. Seven genes encoding Bt spore proteins were cloned and expressed in Escherichia coli. The binding of each purified spore antigen was tested by commercially available polyclonal and monoclonal antibodies claimed to exclusively target spores. Of the seven targets, Bacillus collagen-like protein A, was the most abundant protein on Bt spores and demonstrated the strongest binding affinity to all test antibodies. The commercial antibodies (Abs) were also tested for specificity to BC Group versus non-BC Group spores. Three of six commercial antibodies showed selectivity to Bt spores, with recombinant Abs providing the most robust lower range of detection (10² to 6 × 10³ spores/mL). The sensitivity and selectivity of three published DNA aptamer sequences demonstrated a wide range of detection sensitivity for Bt spores. Two of the three test aptamers also showed reasonable selectivity towards Bt spores while the third demonstrated reactivity to non-BC Group B. megaterium and B. subtilis. Of the reagents tested, a thiolated aptamer and llama recombinant Ab showed highest Bt spore capture efficiency as measured by spore coverage of the GaAs surface. These results confirm that the selected aptamer and llama rAb can be considered strong candidates for the development of GaAs-based biosensing devices.

Rapid and Sensitive Pathogen Detection by DNA Amplification Using Janus Particle-Enabled Rotational Diffusometry

Rapid and sensitive detection of infectious bacteria is in all-time high demand to prevent the further spread of the infection and allow early medical intervention. In this study, we use rotational diffusometry (RD), a natural phenomenon characterized by Janus particles, to detect pathogens like Escherichia coli by performing amplification of specific genes. This biosensing method is used to measure the change in viscosity of the fluid in the presence and absence of DNA in the solution by capturing images of modified microbeads at 10 Hz by a CCD camera followed by cross-correlation algorithm analysis. Using rotational diffusometry, we have achieved E. coli detection with 50 pg/μL DNA with a measurement time of 30 s and a sample volume of 2 μL. This sensitivity was achieved with 30 thermal cycles for three different amplicons, viz., 84, 147, and 246 bp. Meanwhile, in the case of 10 and 20 thermal cycles, the detection sensitivity was achieved with 0.1 and 1 ng/μL DNA concentrations for a 246 bp amplicon. Compared with conventional PCR, this technique appears to improve the detection time, thereby reaching a turnaround time of less than 60 min. Other studies showed a successful identification of DNA amplification up to 10 thermal cycles with different sizes of amplicons. The effect of DNA concentration, amplicon size, and the number of thermal cycles on the detection of E. coli was examined in detail and represented in the form of three maps. These maps show the clear difference and the advantages of RD method in comparison with conventional PCR. This unconventional and rapid biosensing method can be used further for downstream application of nucleic acid amplification-based pathogen detection and early disease control.

A Portable Impedance Immunosensing System for Rapid Detection of Salmonella Typhimurium

SalmonellaTyphimurium is one of the most dangerous foodborne pathogens and poses a significant threat to human health. The objective of this study was to develop a portable impedance immunosensing system for rapid and sensitive detection of S. Typhimurium in poultry. The developed portable impedance immunosensing system consisted of a gold interdigitated array microelectrode (IDAM), a signal acquisitive interface and a laptop computer with LabVIEW software. The IDAM was first functionalized with 16-Mercaptohexadecanoic acid, and streptavidin was immobilized onto the electrode surface through covalent bonding. Then, biotin-labelled S. Typhimurium-antibody was immobilized onto the IDAM surface. Samples were dropped on the surface of the IDAM and the S. Typhimurium cells in the samples were captured by the antibody on the IDAM. This resulted in impedance changes that were measured and displayed with the LabVIEW software. An equivalent circuit of the immunosensor demonstrated that the largest change in impedance was due to the electron-transfer resistance. The equivalent circuit showed an increase of 35% for the electron-transfer resistance value compared to the negative control. The calibration result indicated that the portable impedance immunosensing system could be used to measure the standard impedance elements, and it had a maximum error of measurement of approximately 13%. For pure culture detection, the system had a linear relationship between the impedance change and the logarithmic value of S. Typhimurium cells ranging from 76 to 7.6 × 10⁶ CFU (colony-forming unit) (50 μL)⁻¹. The immunosensor also had a correlation coefficient of 0.98, and a high specificity for detection of S. Typhimurium cells with a limit of detection (LOD) of 10² CFU (50 μL)⁻¹. The detection time from the moment a sample was introduced to the display of the results was 1 h. To conclude, the portable impedance immunosensing system for detection of S. Typhimurium achieved an LOD that is comparable with commercial electrochemical impedance instruments. The developed impedance immunosensor has advantages in portability, low cost, rapid detection and label-free features showing a great potential for in-field detection of foodborne pathogens.

Detection of extremely low concentration waterborne pathogen using a multiplexing self-referencing SERS microfluidic biosensor

BACKGROUND

It is challenging to achieve ultrasensitive and selective detection of waterborne pathogens at extremely low levels (i.e., single cell/mL) using conventional methods. Even with molecular methods such as ELISA or PCR, multi-enrichment steps are needed which are labor and cost intensive. In this study, we incorporated nano-dielectrophoretic microfluidic device with Surface enhanced Raman scattering (SERS) technique to build a novel portable biosensor for easy detection and characterization of Escherichia coli O157:H7 at high sensitivity level (single cell/mL).

RESULTS

A multiplexing dual recognition SERS scheme was developed to achieve one-step target detection without the need to separate target-bound probes from unbound ones. With three different SERS-tagged molecular probes targeting different epitopes of the same pathogen being deployed simultaneously, detection of pathogen targets was achieved at single cell level with sub-species specificity that has not been reported before in single-step pathogen detection.

CONCLUSION

The self-referencing protocol implements with a Nano-dielectrophoretic microfluidic device potentially can become an easy-to-use, field-deployable spectroscopic sensor for onsite detection of pathogenic microorganisms.

CdS-modified porous foam nickel for label-free highly efficient detection of cancer cells

CdS-modified foam nickel (FN) was successfully constructed for the effective detection of cancer cells based on an electrochemiluminescence (ECL) technique and provides a new platform for the realization of an ECL sensor for cancer cells.

Microbial indicators, pathogens and methods for their monitoring in water environment

Water is critical for life, but many people do not have access to clean and safe drinking water and die because of waterborne diseases. The analysis of drinking water for the presence of indicator microorganisms is key to determining microbiological quality and public health safety. However, drinking water-related illness outbreaks are still occurring worldwide. Moreover, different indicator microorganisms are being used in different countries as a tool for the microbiological examination of drinking water. Therefore, it becomes very important to understand the potentials and limitations of indicator microorganisms before implementing the guidelines and regulations designed by various regulatory agencies. This review provides updated information on traditional and alternative indicator microorganisms with merits and demerits in view of their role in managing the waterborne health risks as well as conventional and molecular methods proposed for monitoring of indicator and pathogenic microorganisms in the water environment. Further, the World Health Organization (WHO) water safety plan is emphasized in order to develop the better approaches designed to meet the requirements of safe drinking water supply for all mankind, which is one of the major challenges of the 21st century.

Characterization, validation and application of a DNA microarray for the detection of mandatory and other waterborne pathogens

Culture methods for the detection of indicator bacteria are currently used for detection of waterborne bacteria. The need for an increased range of analyzed bacteria coupled with the obtainment of rapid and early results justify the development of a DNA microarray for the identification of waterborne pathogens. This DNA microarray has 16 implanted probes with a median size of 147 bases, targeting 12 different parameters, including all mandatory indicator microorganisms, such as Escherichia coli, Clostridium perfringens, Pseudomonas aeruginosa, Staphylococcus aureus, total and fecal coliforms and enterococci. The validation performed with DNA extracted from pure microbial cultures showed the suitability of the probes for detection of the target microorganism. To overcome the high dilution of water samples it was included either a prior culture step of bacterial contaminants retained after filtering 100 ml of water, or a 10-fold increase in the volume of filtered water, that resulted in the increase of the detected bacteria. The analysis of complex environmental water samples using culture methods and the DNA microarray revealed that the latter detected the same parameters plus other bacteria tested only in the DNA microarray. The results show that this DNA microarray may be a useful tool for water microbiological surveillance.

Simultaneous quantification of multiple food- and waterborne pathogens by use of microfluidic quantitative PCR

The direct quantification of multiple pathogens has been desired for diagnostic and public health purposes for a long time. In this study, we applied microfluidic quantitative PCR (qPCR) technology to the simultaneous detection and quantification of multiple food- and waterborne pathogens. In this system, multiple singleplex qPCR assays were run under identical detection conditions in nanoliter-volume chambers that are present in high densities on a chip. First, we developed 18 TaqMan qPCR assays that could be run in the same PCR conditions by using prevalidated TaqMan probes. Specific and sensitive quantification was achieved by using these qPCR assays. With the addition of two previously validated TaqMan qPCR assays, we used 20 qPCR assays targeting 10 enteric pathogens, a fecal indicator bacterium (general Escherichia coli), and a process control strain in the microfluidic qPCR system. We preamplified the template DNA to increase the sensitivity of the qPCR assays. Our results suggested that preamplification was effective for quantifying small amounts of the template DNA without any major impact on the sensitivity, efficiency, and quantitative performance of qPCR. This microfluidic qPCR system allowed us to detect and quantify multiple pathogens from fecal samples and environmental water samples spiked with pathogens at levels as low as 100 cells/liter. These results suggest that the routine monitoring of multiple pathogens in food and water samples is now technically feasible. This method may provide more reliable information for risk assessment than the current fecal contamination indicator approach.

Spinning magnetic trap for automated microfluidic assay systems

While sophisticated analyses have been performed using lab-on-chip devices, in most cases the sample preparation is still performed off chip. The global need for easy-to-use, disposable testing devices necessitates that sample processing is automated and that transport complexity between the processing and analytical components is minimal. We describe a complete sample manipulation unit for performing automated target capture, efficient mixing with reagents, and controlled target release in a microfluidic channel, using an array of spinning magnets. The "MagTrap" device consists of 6 pairs of magnets in a rotating wheel, situated immediately beneath the microchannel. Rotation of the wheel in the direction opposite to the continuous flow entraps and concentrates the bead-target complexes and separates them from the original sample matrix. As the wheel rotates and the active pair of magnets moves away from the microchannel, the beads are released and briefly flow downstream before being trapped and pulled upstream by the next pair of magnets. This dynamic and continuous movement of the beads ensures that the full surface area of each bead is exposed to reagents and prevents aggregation. The release of the target-bead complexes for further analysis is facilitated by reversing the rotational direction of the wheel to sweep the beads downstream. Sample processing with the MagTrap was demonstrated for the detection of E. coli in a range of concentrations (1 × 10(3), 1 × 10(4) and 1 × 10(6) cells ml(-1)). Results show that sample processing with the MagTrap outperformed the standard manual protocols, improving the detection capability while simultaneously reducing the processing time.

Abundance of Enterococcus species, Enterococcus faecalis and Enterococcus faecium, essential indicators of fecal pollution, in river water

Enterococci such as Enterococcus faecalis and E. faecium are considered as the most suitable indicators of fecal pollution in an aquatic environment, and new methods for Enterococcus determination have been developed, namely, membrane filtration (MF) using membrane-Enterococcus indoxyl-β-D-glucoside agar (mEI) and defined substrate technology (DST) using Enterolert®. This study used PCR analysis to identify E. faecalis and E. faecium among Enterococcus strains in river water isolated using both mEI plates and Enterolert® trays. There was a significantly high correlation between MF and DST in terms of enterococcal counts for river water samples. The combined percentages of E. faecalis and E. faecium with respect to the total number of all strains obtained using mEI plates and Enterolert® trays were approximately 30 % and >30 %, respectively. Other than E. faecalis and E. faecium, a large number of Enterococcus species were unspecified in the actual urban river samples. A comparison of the predominance of E. faecalis and E. faecium found that the abundance of a species depended on the sampling river and date. E. faecium is a non-predominant species in intestinal and fecal Enterococci, and it was one of the main Enterococcus species detected in surface water.

Specific peptides as alternative to antibody ligands for biomagnetic separation of Clostridium tyrobutyricum spores

Nowadays, the reference method for the detection of Clostridium tyrobutyricum in milk is the most-probable-number method, a very time-consuming and non-specific method. In this work, the suitability of the use of superparamagnetic beads coated with specific antibodies and peptides for bioseparation and concentration of spores of C. tyrobutyricum has been assessed. Peptide or antibody functionalized nanoparticles were able to specifically bind C. tyrobutyricum spores and concentrate them up to detectable levels. Moreover, several factors, such as particle size (200 nm and 1 μm), particle derivatization (aminated and carboxylated beads), coating method, and type of ligand have been studied in order to establish the most appropriate conditions for spore separation. Results show that concentration of spore is favored by a smaller bead size due to the wider surface of interaction in relation to particle volume. Antibody orientation, related to the binding method, is also critical in spore recovery. However, specific peptides seem to be a better ligand than antibodies, not only due to the higher recovery ratio of spores obtained but also due to the prolonged stability over time, allowing an optimal recovery of spores up to 3 weeks after bead coating. These results demonstrate that specific peptides bound to magnetic nanoparticles can be used instead of traditional antibodies to specifically bind C. tyrobutyricum spores being a potential basis for a rapid method to detect this bacterial target.

Underwater application of quantitative PCR on an ocean mooring

The Environmental Sample Processor (ESP) is a device that allows for the underwater, autonomous application of DNA and protein probe array technologies as a means to remotely identify and quantify, in situ, marine microorganisms and substances they produce. Here, we added functionality to the ESP through the development and incorporation of a module capable of solid-phase nucleic acid extraction and quantitative PCR (qPCR). Samples collected by the instrument were homogenized in a chaotropic buffer compatible with direct detection of ribosomal RNA (rRNA) and nucleic acid purification. From a single sample, both an rRNA community profile and select gene abundances were ascertained. To illustrate this functionality, we focused on bacterioplankton commonly found along the central coast of California and that are known to vary in accordance with different oceanic conditions. DNA probe arrays targeting rRNA revealed the presence of 16S rRNA indicative of marine crenarchaea, SAR11 and marine cyanobacteria; in parallel, qPCR was used to detect 16S rRNA genes from the former two groups and the large subunit RuBisCo gene (rbcL) from Synecchococcus. The PCR-enabled ESP was deployed on a coastal mooring in Monterey Bay for 28 days during the spring-summer upwelling season. The distributions of the targeted bacterioplankon groups were as expected, with the exception of an increase in abundance of marine crenarchaea in anomalous nitrate-rich, low-salinity waters. The unexpected co-occurrence demonstrated the utility of the ESP in detecting novel events relative to previously described distributions of particular bacterioplankton groups. The ESP can easily be configured to detect and enumerate genes and gene products from a wide range of organisms. This study demonstrated for the first time that gene abundances could be assessed autonomously, underwater in near real-time and referenced against prevailing chemical, physical and bulk biological conditions.

Pathogen detection using short-RNA deep sequencing subtraction and assembly

MOTIVATION

Early and accurate detection of human pathogen infection is critical for treatment and therapeutics. Here we describe pathogen identification using short RNA subtraction and assembly (SRSA), a detection method that overcomes the requirement of prior knowledge and culturing of pathogens, by using degraded small RNA and deep sequencing technology. We prove our approach's efficiency through identification of a combined viral and bacterial infection in human cells.

Development of a sensitive detection method for stressed E. coli O157:H7 in source and finished drinking water by culture-qPCR

A sensitive and specific method that also demonstrates viability is of interest for detection of E. coli O157:H7 in drinking water. A combination of culture and qPCR was investigated. Two triplex qPCRs, one from a commercial source and another designed for this study were optimized from 5 different assays to be run on a single qPCR plate. The qPCR assays were specific for 33 E. coli O157:H7 strains tested and detected 500 cells spiked in a background of 10(8) nontarget bacterial cells. The qPCR detection was combined with an enrichment process using Presence Absence (P/A) broth to detect chlorine and starvation stressed cells. qPCR analysis performed post-enrichment allowed the detection of 3-4 cells/L as indicated by a sharp increase in fluorescence (lowering of Ct values) from pre-enrichment levels, demonstrating a 5-6 log increase in the number of cells. When six vulnerable untreated surface water samples were examined, only one was positive for viable E. coli O157:H7 cells. These results suggest that the culture-PCR procedure can be used for rapid detection of E. coli O157:H7 in drinking water.

Improved bacteria detection by coupling magneto-immunocapture and amperometry at flow-channel microband electrodes

This paper describes the first immunosensing system reported for the detection of bacteria combining immunomagnetic capture and amperometric detection in a one-step sandwich format, and in a microfluidic environment. Detection is based on the electrochemical monitoring of the activity of horseradish peroxidase (HRP), an enzyme label, through its catalysis of hydrogen peroxide (H(2)O(2)) in the presence of the mediator hydroquinone (HQ). The enzymatic reaction takes place in an incubation micro-chamber where the magnetic particles (MPs) are confined, upstream from the working electrode. The enzyme product is then pumped along a microchannel, where it is amperometrically detected by a set of microelectrodes. This design avoids direct contact of the biocomponents with the electrode, which lowers the risk of electrode fouling. The whole assay can be completed in 1h. The experiments performed with Escherichia coli evidenced a linear response for concentrations ranging 10(2)-10(8) cell ml(-1), with a limit of detection of 55 cells ml(-1) in PBS, without pre-enrichment steps. Furthermore, 100 cells ml(-1) could be detected in milk, and with negligible interference by non-target bacteria such as Pseudomonas.

Recent advances in the development of nucleic acid diagnostics

Since the early 1970s, the use of nucleic acid sequences for specific diagnostic applications has followed a somewhat linear pattern of development. Early methods for restriction enzyme digestion, as well as reverse transcription, were followed in the late 1970s by Southern, northern and dot blotting, as well as DNA sequencing. In 1985, the description of PCR and the routine laboratory manipulation of sufficient quantities of DNA for diagnostics, resulted in the exponential growth of molecular biology. Subsequently, alternative DNA and RNA amplification protocols followed. The last 10 years have seen the second explosion in molecular biology with the development of real-time quantitative PCR and oligonucleotide microarrays. This advancement continues with the development of methods for 'direct' nucleic acid target detection from samples without in vitro amplification, and enhanced transduction elements for improved sensitivity of nucleic acid detection. In this article, we will describe the current state of the art in nucleic acid diagnostics, the use of nucleic acid-based diagnostics in clinical practice and the emerging technologies in the field. Finally, we will describe future trends and expected advances in the field.

Surface plasmon resonance detection using antibody-linked magnetic nanoparticles for analyte capture, purification, concentration, and signal amplification

Rapid, sensitive, and accurate detection of analytes present in low concentrations in complex matrixes is a critical challenge. One issue that affects many biosensor protocols is the number and nature of the interferences present in complex matrixes such as plasma, urine, stool, and environmental samples, resulting in loss of sensitivity and specificity. We have developed a method for rapid purification, concentration, and detection of target analytes from complex matrixes using antibody-coated superparamagnetic nanobeads (immunomagnetic beads, or IMBs). The surface plasmon resonance (SPR) detection signal from staphylococcal enterotoxin B (SEB) was dramatically increased when the IMBs were used as detection amplifiers. When SEB detection included a 10-fold concentration/purification IMB protocol, a substantial increase in detection sensitivity was observed. This procedure was used to successfully purify and concentrate SEB from serum and stool samples, then amplify the SPR detection signal. SEB at a concentration of 100 pg/mL was easily detected in both buffer and stool samples using this procedure. The IMB protocol also served to verify the analyte detection by using two different anti-SEB antibodies, mouse monoclonal antibodies attached to the magnetic nanobeads and rabbit polyclonal antibodies on the SPR sensor surface. Multiple detections of SEB in stool were performed using the same sensor surface by regenerating the sensor surfaces with a pH 2.2 buffer wash.

Molecular detection of pathogens in water--the pros and cons of molecular techniques

Pollution of water by sewage and run-off from farms produces a serious public health problem in many countries. Viruses, along with bacteria and protozoa in the intestine or in urine are shed and transported through the sewer system. Even in highly industrialized countries, pathogens, including viruses, are prevalent throughout the environment. Molecular methods are used to monitor viral, bacterial, and protozoan pathogens, and to track pathogen- and source-specific markers in the environment. Molecular techniques, specifically polymerase chain reaction-based methods, provide sensitive, rapid, and quantitative analytical tools with which to study such pathogens, including new or emerging strains. These techniques are used to evaluate the microbiological quality of food and water, and to assess the efficiency of virus removal in drinking and wastewater treatment plants. The range of methods available for the application of molecular techniques has increased, and the costs involved have fallen. These developments have allowed the potential standardization and automation of certain techniques. In some cases they facilitate the identification, genotyping, enumeration, viability assessment, and source-tracking of human and animal contamination. Additionally, recent improvements in detection technologies have allowed the simultaneous detection of multiple targets in a single assay. However, the molecular techniques available today and those under development require further refinement in order to be standardized and applicable to a diversity of matrices. Water disinfection treatments may have an effect on the viability of pathogens and the numbers obtained by molecular techniques may overestimate the quantification of infectious microorganisms. The pros and cons of molecular techniques for the detection and quantification of pathogens in water are discussed.

Bacterial capture by peptide-mimetic oligoacyllysine surfaces

Most procedures for detecting pathogens in liquid media require an initial concentration step. However, poor recovery efficiencies of conventional methods, such as filtration, often lead to low sensitivity. Here, we describe a strategy for concentrating bacteria using their binding affinity for an oligoacyllysine (OAK), a novel peptide-mimetic antimicrobial compound. We show that the resin-linked OAK (ROAK) efficiently captures a variety of pathogens in different media, upon brief incubation with ROAK beads or after continuous flow through a ROAK-packed column. Using Escherichia coli expressing green fluorescent protein, we show that binding occurs rapidly during incubation and persists after filtration as visualized by confocal microscopy. The high binding affinity of bacteria was confirmed by surface plasmon resonance technology using an OAK-linked chip. ROAK-bound bacteria remained viable and were readily identifiable by real-time PCR after ethanol elution. A single ROAK bead is estimated to capture about 3,000 bacterial cells in culture medium, in contaminated saline or tap water. ROAK beads can be regenerated for multiple uses after brief ethanol treatment. Collectively, the data support the notion that OAK-based coating of polymeric surfaces might represent a useful means for medium filtration as well as for concentration of bacteria.

Simultaneous detection of Acidovorax avenae subsp. citrulli and Didymella bryoniae in cucurbit seedlots using magnetic capture hybridization and real-time polymerase chain reaction

To improve the simultaneous detection of two pathogens in cucurbit seed, a combination of magnetic capture hybridization (MCH) and multiplex real-time polymerase chain reaction (PCR) was developed. Single-stranded DNA hybridization capture probes targeting DNA of Acidovorax avenae subsp. citrulli, causal agent of bacterial fruit blotch, and Didymella bryoniae, causal agent of gummy stem blight, were covalently attached to magnetic particles and used to selectively concentrate template DNA from cucurbit seed samples. Sequestered template DNAs were subsequently amplified by multiplex real-time PCR using pathogen-specific TaqMan PCR assays. The MCH multiplex real-time PCR assay displayed a detection threshold of A. avenae subsp. citrulli at 10 CFU/ml and D. bryoniae at 10(5) conidia/ml in mixtures of pure cultures of the two pathogens, which was 10-fold more sensitive than the direct real-time PCR assays for the two pathogens separately. Although the direct real-time PCR assay displayed a detection threshold for A. avenae subsp. citrulli DNA of 100 fg/microl in 25% (1/4 samples) of the samples assayed, MCH real-time PCR demonstrated 100% detection frequency (4/4 samples) at the same DNA concentration. MCH did not improve detection sensitivity for D. bryoniae relative to direct real-time PCR using conidial suspensions or seed washes from D. bryoniae-infested cucurbit seed. However, MCH real-time PCR facilitated detection of both target pathogens in watermelon and melon seed samples (n = 5,000 seeds/sample) in which 0.02% of the seed were infested with A. avenae subsp. citrulli and 0.02% were infested with D. bryoniae.

Renewable surface fluorescence sandwich immunoassay biosensor for rapid sensitive botulinum toxin detection in an automated fluidic format

A renewable surface biosensor for rapid detection of botulinum neurotoxin serotype A is described based on fluidic automation of a fluorescence sandwich immunoassay, using a recombinant protein fragment of the toxin heavy chain ( approximately 50 kDa) as a structurally valid simulant. Monoclonal antibodies AR4 and RAZ1 bind to separate non-overlapping epitopes of the full botulinum holotoxin ( approximately 150 kDa). Both of the targeted epitopes are located on the recombinant fragment. The AR4 antibody was covalently bound to Sepharose beads and used as the capture antibody. A rotating rod flow cell was used to capture these beads delivered as a suspension by a sequential injection flow system, creating a 3.6 microL column. After perfusing the bead column with sample and washing away the matrix, the column was perfused with Alexa 647 dye-labeled RAZ1 antibody as the reporter. Optical fibers coupled to the rotating rod flow cell at a 90 degrees angle to one another delivered excitation light from a HeNe laser (633 nm) using one fiber and collected fluorescent emission light for detection with the other. After each measurement, the used Sepharose beads are released and replaced with fresh beads. In a rapid screening approach to sample analysis, the toxin simulant was detected to concentrations of 10 pM in less than 20 minutes using this system.

Fecal source tracking, the indicator paradigm, and managing water quality

Fecal source tracking is used because standard methods of measuring fecal contamination in water by enumerating fecal indicator bacteria (FIB) do not identify the sources of the contamination. This paper presents a critical review of source tracking with emphasis on the extent to which methods have been tested (especially in comparison with other methods and/or with blind samples), when methods are applicable, their shortcomings, and their usefulness in predicting public health risk or pathogen occurrence. In addition, the paper discusses the broader question of whether fecal source tracking and fecal indicator monitoring is the best approach to regulate water quality and protect human health. Many fecal source-tracking methods have only been tested against sewage or fecal samples or isolates in laboratory studies (proof of concept testing) and/or applied in field studies where the "real" answer is not known, so their comparative performance and accuracy cannot be assessed. For source tracking to be quantitative, stability of ratios between host-specific markers in the environment must be established. In addition, research is needed on the correlation between host-specific markers and pathogens, and survival of markers after waste treatments. As a result of the exclusive emphasis on FIB in legislation, monitoring has concentrated on FIB and lost sight of pathogens. A more rational approach to regulating water quality would start with available epidemiological data to identify pathogens of concern in a particular water body, and then use targeted pathogen monitoring coupled with targeted fecal source tracking to control them. Baseline monitoring of indicators would become just one tool among many.

Detection of Escherichia coli O157, Salmonella enterica serovar Typhimurium, and staphylococcal enterotoxin B in a single sample using enzymatic bio-nanotransduction

Enzymatic bio-nanotransduction is a biological detection scheme based on the production of nucleic acid nano-signals (RNA) in response to specific biological recognition events. In this study, we applied an enzymatic bio-nanotransduction system to the detection of important food-related pathogens and a toxin. Escherichia coli O157:H7, Salmonella enterica serovar Typhimurium, and staphylococcal enterotoxin B (SEB) were chosen because of the implications of these targets to food safety. Primary antibodies to each of the targets were used to functionalize magnetic beads and produce biological recognition elements (antibodies) conjugated to nano-signal-producing DNA templates. Immunomagnetic capture that was followed by in vitro transcription of DNA templates bound to target molecules produced RNA nano-signals specific for every target in the sample. Discrimination of RNA nano-signals with a standard enzyme-linked oligonucleotide fluorescence assay provided a correlation between nano-signal profiles and target concentrations. The estimated limit of detection was 2.4 x 10(3) CFU/ml for E. coli O157:H7, 1.9 X 10(4) CFU/ml for S. enterica serovar Typhimurium, and 0.11 ng/ml for SEB with multianalyte detection in buffer. Low levels of one target were also detected in the presence of interference from high levels of the other targets. Finally, targets were detected in milk, and detection was improved for E. coli 0157 by heat treatment of the milk.

Virulence factor activity relationships: challenges and development approaches

Virulence factor activity relationships (VFAR) is a predictive approach proposed by the National Research Council's Committee on Drinking Water Contaminants (Washington, D.C.) to classify and rank waterborne pathogens. It is based on the presumption that health threats of waterborne pathogens can be predicted from descriptors at different levels of cellular organization. This paper summarizes challenges that need to be addressed while developing VFAR, with a focus on genomics, such as genomic variability among related pathogens and the need to incorporate genetic descriptors for persistence and host susceptibility. Three key components of VFAR development and validation are also presented, including (1) compilation of a comprehensive VFAR database, (2) development of predictive mathematical models relating descriptors to health effects and other microbial responses, and (3) high-throughput molecular monitoring of drinking water supplies and sources. Bayesian approach and on-chip polymerase chain reaction are discussed as examples of mathematical models and molecular monitoring.

Octaplex PCR and fluorescence-based capillary electrophoresis for identification of human diarrheagenic Escherichia coli and Shigella spp

A multiplex PCR assay, amplifying seven specific virulence genes and one internal control gene in a single reaction, was developed to identify the five main pathotypes of diarrheagenic Escherichia coli and Shigella spp. The virulence genes selected for each category were Stx1, Stx2, and eaeA for enterohemorrhagic E. coli (EHEC), eaeA for enteropathogenic E. coli (EPEC), STIb and LTI for enterotoxigenic E. coli (ETEC), ipaH for enteroinvasive E. coli (EIEC) and Shigella spp., and aggR for enteroaggregative E. coli (EAEC). Each forward primer was labelled with a fluorochrome and the PCR products were separated by multicolour capillary electrophoresis on an ABI PRISM310 Genetic Analyzer (Applied Biosystems). If present, several gene variants of each virulence gene were identified. The internal control gene rrs, encoding 16S rRNA, was amplified in all 110 clinical strains analyzed. Virulence genes were demonstrated in 103 (94%) of these strains. In the majority of the cases (98/103, 95%), classification obtained by the novel multiplex PCR assay was in agreement with that previously determined by phenotypic assays combined with other molecular genetic approaches. Numerous multiplex PCR assays have been published, but only a few of them detect all five E. coli pathotypes within a single reaction, and none of them has used multicolour capillary electrophoresis to separate the PCR products. The octaplex PCR assay followed by capillary electrophoresis presented in the present paper provides a simple, reliable, and rapid procedure that in a single reaction identifies the five main pathotypes of E. coli, and Shigella spp. This assay will replace the previous molecular genetic methods used in our laboratory and work as an important supplement to the more time-consuming phenotypic assays.

Preparation and evaluation of spore-specific affinity-augmented bio-imprinted beads

A novel, affinity-augmented, bacterial spore-imprinted, bead material was synthesized, based on a procedure developed for vegetative bacteria. The imprinted beads were intended as a front-end spore capture/concentration stage of an integrated biological detection system. Our approach involved embedding bead surfaces with Bacillus thuringiensis kurstaki (Bt) spores (as a surrogate for Bacillus anthracis) during synthesis. Subsequent steps involved lithographic deactivation using a perfluoroether; spore removal to create imprint sites; and coating imprints with the lectin, concanavalin A, to provide general affinity. The synthesis of the intended material with the desired imprints was verified by scanning electron and confocal laser-scanning microscopy. The material was evaluated using spore-binding assays with either Bt or Bacillus subtilis (Bs) spores. The binding assays indicated strong spore-binding capability and a robust imprinting effect that accounted for 25% additional binding over non-imprinted controls. The binding assay results also indicated that further refinement of the surface deactivation procedure would enhance the performance of the imprinted substrate.

Enzyme-amplified protein microarray and a fluidic renewable surface fluorescence immunoassay for botulinum neurotoxin detection using high-affinity recombinant antibodies

Two immunoassay platforms were developed for either the sensitive or rapid detection of botulinum neurotoxin A (BoNT/A), using high-affinity recombinant monoclonal antibodies against the receptor binding domain of the heavy chain of BoNT/A. These antibodies also bind the same epitopes of the receptor binding domain present on a nontoxic recombinant heavy chain fragment used for assay development and testing in the current study. An enzyme-linked immunosorbent assay (ELISA) microarray using tyramide amplification for localized labeling was developed for the specific and sensitive detection of BoNT. This assay has the sensitivity to detect BoNT in buffer and blood plasma samples down to 14fM (1.4 pg mL(-1)). Three capture antibodies and one antibody combination were compared in the development of this assay. Using a selected pair from the same set of recombinant monoclonal antibodies, a renewable surface microcolumn sensor was developed for the rapid detection of BoNT/A in an automated fluidic system. The ELISA microarray assay, because of its sensitivity, offers a screening test with detection limits comparable to the mouse bioassay, with results available in hours instead of days. The renewable surface assay is less sensitive but much faster, providing results in less than 10 min.

Detection of Clavibacter michiganensis subsp. michiganensis in tomato seeds using immunomagnetic separation

The use of pathogen-free plant material is the main strategy for controlling bacterial canker of tomato caused by Clavibacter michiganensis subsp. michiganensis. However, detection and isolation of this pathogen from seeds before field or greenhouse cultivation is difficult when the bacterium is at low concentration and associated microbiota are present. Immunomagnetic separation (IMS), based on the use of immunomagnetic beads (IMBs) coated with specific antibodies, was used to capture C. michiganensis subsp. michiganensis cells, allowing removal of non-target bacteria from samples before plating on non-selective medium. Different concentrations of IMBs and of two antisera were tested, showing that IMS with 10(6)IMBs/ml coated with a polyclonal antiserum at 1/3200 dilution recovered more than 50% of target cells from initial inocula of 10(3) to 10(0)CFU/ml. Threshold detection was lower than 10CFU/ml even in seed extracts containing seed debris and high populations of non-target bacteria. The IMS permitted C. michiganensis subsp. michiganensis isolation from naturally infected seeds with higher sensitivity and faster than direct isolation on the semiselective medium currently used and could become a simple viable system for routinely testing tomato seed lots in phytosanitary diagnostic laboratories.

Molecular techniques in wastewater: Understanding microbial communities, detecting pathogens, and real-time process control

Traditionally, the detection of pathogens in water, wastewater, and other environmental samples is restricted by the ability to culture such organisms from complex environmental samples. During the last decade the use of molecular methods have supplied the means for examining microbial diversity and detecting specific organisms without the need for cultivation. The application of molecular techniques to the study of natural and engineered environmental systems has increased our insight into the vast diversity and interaction of microorganisms present in complex environments. In this paper, we will review the current and emerging molecular approaches for characterizing microbial community composition and structure in wastewater processes. Recent studies show that advances in microarray assays are increasing our capability of detecting hundreds and even thousands of DNA sequences simultaneously and rapidly. With the current progress in microfluidics and optoelectronics, the ability to automate a detection/identification system is now being realized. The status of such a system for wastewater monitoring is discussed.