Immobilization in alginate as a technique for the preservation of Bacillus thuringiensis var. israelensis for long-term preservation

Microencapsulation of an indigenous isolate of Bacillus thuringiensis by spray drying

In this study, microencapsulation by spray drying was performed to protect spores and crystals of an indigenous isolate of Bacillus thuringiensis Se13 from environmental stress. The effects of wall material, inlet temperature, and outlet temperature on microencapsulation of Bt-Se13 were investigated using Taguchi's orthogonal array. The most suitable wall material determined as maltodextrin DE10. The optimum inlet and outlet temperatures of spray drier were determined as 160 °C and 70 °C, respectively. The number of viable spores, mean particle size, wetting time, percentage of suspensibility and moisture content of the product produced under optimum conditions were determined as 8.1 × 10¹¹ cfu g^-1, 13.462 µm, 25.22 s, 77.66% and 7.29%, respectively. As a result of efficiency studies on Spodoptera exigua in the laboratory conditions, the LC₅₀ was determined as 1.6 × 10⁴ cfu mL^-1. Microencapsulated Bt-Se13 based bio-pesticide may be registered for the control of S. exigua and can be tested against other lepidopterans which share the same environment.

A new formulation of Bacillus thuringiensis: UV protection and sustained release mosquito larvae studies

Persistence of Bacillus thuringiensis is an important factor in determining the success of this product as a pest control agent. In this report we present the development of a highly active mosquitocidal formulation with high resistance to UV. LLP29-M19 strain of Bt, selected by repeated exposure to UV was found to be highly resistant to UV. The product was optimized and the methods used were statistically analyzed. Using single-factor experiments it was determined that the optimal concentration of sodium alginate, CaCl₂ and hollow glass beads in the formulation were 1.0%, 2.0% and 3.5%, respectively. Plackett-Burman design was used to screen the interaction of the three factors, CaCl₂, sodium alginate and hollow glass beads in the sustained-release formulation. The best combined concentration and mutual effects of the three factors were optimized by response surface methodology. The results showed that the most favorable composition was sodium alginate 0.78%, CaCl₂ 4.52%, hollow glass bead 3.12%, bacterial powder 3.0%, melanin 0.015%, sodium benzoate 0.2%, and mouse feed 0.5%, resulting in the immobilization time of 4.5 h, at which time the corrected sustained-release virulence rose 2391.67 fold, which was 6.07-fold higher than the basic formulation and deviated only 5.0% from the value predicted by RSM.

Preparation and evaluation of Bacillus megaterium-alginate microcapsules for control of rice sheath blight disease

Bacillus megaterium encapsulated in calcium alginate microcapsules was prepared and tested for its efficacy against sheath blight disease of rice. In laboratory conditions, the aqueous suspension (1:100, v/v in potato dextrose agar) of the bacterial microcapsules (10(10) spores/ml) inhibited mycelial growth of Rhizoctonia solani (>99 %) after the microcapsules were produced and stored for 12 months at room temperature (28 ± 2 °C). The survival of the bacterium in the microcapsules in response to ultraviolet (u.v.) irradiation and high temperature was investigated. The survivability of the bacterium in the encapsulated form was greater than that of the fresh cells when it was subjected to u.v. (20-W General electric u.v. lamp from a 25 cm distance for 48 h) and a high temperature treatment (80 °C for 48 h). Cells of the bacterium were detected by scanning electron microscope on both the leaf sheath and the leaf blade (in pot tests in a greenhouse) after spraying encapsulated product. The number of bacteria on the surface of both rice tissues (5 Log. number/g of plant) after spraying with encapsulated product was not significantly different from that after spraying with fresh cells onto the rice seedlings. Spraying the encapsulated B. megaterium on rice plants in the greenhouse was as effective as spraying a chemical fungicide for suppressing rice sheath blight disease.

Storage and persistence of a candidate fungal biopesticide for use against adult malaria vectors

Background

New products aimed at augmenting or replacing chemical insecticides must have operational profiles that include both high efficacy in reducing vector numbers and/or blocking parasite transmission and be long lasting following application. Research aimed at developing fungal spores as a biopesticide for vector control have shown considerable potential yet have not been directly assessed for their viability after long-term storage or following application in the field.

Methods

Spores from a single production run of the entomopathogenic fungi Beauveria bassiana were dried and then stored under refrigeration at 7°C. After 585 days these spores were sub-sampled and placed at either 22°C, 26°C or 32°C still sealed in packaging (closed storage) or in open beakers and exposed to the 80% relative humidity of the incubator they were kept in. Samples were subsequently taken from these treatments over a further 165 days to assess viability. Spores from the same production run were also used to test their persistence following application to three different substrates, clay, cement and wood, using a hand held sprayer. The experiments were conducted at two different institutes with one using adult female Anopheles stephensi and the other adult female Anopheles gambiae. Mosquitoes were exposed to the treated substrates for one hour before being removed and their survival monitored for the next 14 days. Assays were performed at monthly intervals over a maximum seven months.

Results

Spore storage under refrigeration resulted in no loss of spore viability over more than two years. Spore viability of those samples kept under open and closed storage was highly dependent on the incubation temperature with higher temperatures decreasing viability more rapidly than cooler temperatures. Mosquito survival following exposure was dependent on substrate type. Spore persistence on the clay substrate was greatest achieving 80% population reduction for four months against An. stephensi and for at least five months against Anopheles gambiae. Cement and wood substrates had more variable mortality with the highest spore persistence being two to three months for the two substrates respectively.

Conclusions

Spore shelf-life under refrigeration surpassed the standard two year shelf-life expected of a mosquito control product. Removal to a variety of temperatures under either closed or open storage indicated that samples sent out from refrigeration should be deployed rapidly in control operations to avoid loss of viability. Spore persistence following application onto clay surfaces was comparable to a number of chemical insecticides in common use. Persistence on cement and wood was shorter but in one assay still comparable to some organophosphate and pyrethroid insecticides. Optimized formulations could be expected to improve spore persistence still further.