Current physical and SDS extraction methods do not efficiently remove exosporium proteins from Bacillus anthracis spores

Role of novel polysaccharide layers in assembly of the exosporium, the outermost protein layer of the Bacillus anthracis spore

A fundamental question in cell biology is how cells assemble their outer layers. The bacterial endospore is a well-established model for cell layer assembly. However, the assembly of the exosporium, a complex protein shell comprising the outermost layer in the pathogen Bacillus anthracis, remains poorly understood. Exosporium assembly begins with the deposition of proteins at one side of the spore surface, followed by the progressive encirclement of the spore. We seek to resolve a major open question: the mechanism directing exosporium assembly to the spore, and then into a closed shell. We hypothesized that material directly underneath the exosporium (the interspace) directs exosporium assembly to the spore and drives encirclement. In support of this, we show that the interspace possesses at least two distinct layers of polysaccharide. Secondly, we show that putative polysaccharide biosynthetic genes are required for exosporium encirclement, suggesting a direct role for the interspace. These results not only significantly clarify the mechanism of assembly of the exosporium, an especially widespread bacterial outer layer, but also suggest a novel mechanism in which polysaccharide layers drive the assembly of a protein shell.

Optimization of Sporulation and Purification Methods for Sporicidal Efficacy Assessment on Bacillus Spores

Validating the efficacy of sporicidal agents is a critical step in current good manufacturing practices for disinfection requirements. A limitation is that the poor quality of spores can lead to false positive sporicidal results. The aim of this study was to explore optimal sporulation and purification methods in Bacillus spores. Spores of seven Bacillus strains were produced in five different sporulation media. After density centrifugation, spore yields were measured by phase-contrast microscopy and enumeration assays. Effects of purification methods including heat, sonication and lysozyme, and maturation on spore qualities were determined by sodium hypochlorite sporicidal assay. Difco Sporulation Media was identified as the preferred sporulation medium for four out of seven tested Bacillus strains. Sporulation rates in B. cereus, B. sphaericus, and B. thuringiensis were higher at 30°C than the rates at 37°C at a difference of 5%, 65%, and 20%, respectively. B. licheniformis favored Mn2+-amended 10% Columbia Broth at 37°C for sporulation with 40-72% higher sporulation rates than other media. The maximum sporulation rates of B. cereus and B. thuringiensis were observed on double-strength Schaeffer's-glucose broth. All studied purification methods improved the spore purity with strain variations. However, intense heat (80°C for 20 min) and lysozyme (100 μg/mL) treatment impaired the spore quality of specific Bacillus strains by sensitizing them against sodium hypochlorite. The length of maturation period had impact on the spore resistance, and the most optimal maturation periods ranged from 7 to 21 days in Bacillus strains. The results of this study will pave the way for further evaluation of sporicidal activity of disinfectants.

LysPBC2, a Novel Endolysin Harboring a Bacillus cereus Spore Binding Domain

To control the spore-forming human pathogen Bacillus cereus, we isolated and characterized a novel endolysin, LysPBC2, from a newly isolated B. cereus phage, PBC2. Compared to the narrow host range of phage PBC2, LysPBC2 showed very broad lytic activity against all Bacillus, Listeria, and Clostridium species tested. In addition to a catalytic domain and a cell wall binding domain, LysPBC2 has a spore binding domain (SBD) partially overlapping its catalytic domain, which specifically binds to B. cereus spores but not to vegetative cells of B. cereus Both immunogold electron microscopy and a binding assay indicated that the SBD binds the external region of the spore cortex layer. Several amino acid residues required for catalytic or spore binding activity of LysPBC2 were determined by mutagenesis studies. Interestingly, LysPBC2 derivatives with impaired spore binding activity showed an increased lytic activity against vegetative cells of B. cereus compared with that of wild-type LysPBC2. Further biochemical studies revealed that these LysPBC2 derivatives have lower thermal stability, suggesting a stabilizing role of SBD in LysPBC2 structure.IMPORTANCE Bacteriophages produce highly evolved lytic enzymes, called endolysins, to lyse peptidoglycan and release their progeny from bacterial cells. Due to their potent lytic activity and specificity, the use of endolysins has gained increasing attention as a natural alternative to antibiotics. Since most endolysins from Gram-positive-bacterium-infecting phages have a modular structure, understanding the function of each domain is crucial to make effective endolysin-based therapeutics. Here, we report the functional and biochemical characterization of a Bacillus cereus phage endolysin, LysPBC2, which has an unusual spore binding domain and a cell wall binding domain. A single point mutation in the spore binding domain greatly enhanced the lytic activity of endolysin at the cost of reduced thermostability. This work contributes to the understanding of the role of each domain in LysPBC2 and will provide insight for the rational design of efficient antimicrobials or diagnostic tools for controlling B. cereus.

Observations on research with spores of Bacillales and Clostridiales species

The purpose of this article is to highlight some areas of research with spores of bacteria of Firmicute species in which the methodology too commonly used is not optimal and generates misleading results. As a consequence, conclusions drawn from data obtained are often flawed or not appropriate. Topics covered in the article include the following: (i) the importance of using well-purified bacterial spores in studies on spore resistance, composition, killing, disinfection and germination; (ii) methods for obtaining good purification of spores of various species; (iii) appropriate experimental approaches to determine mechanisms of spore resistance and spore killing by a variety of agents, as well as known mechanisms of spore resistance and killing; (iv) common errors made in drawing conclusions about spore killing by various agents, including failure to neutralize chemical agents before plating for viable spore enumeration, and equating correlations between changes in spore properties accompanying spore killing with causation. It is hoped that a consideration of these topics will improve the quality of spore research going forward.

Assembly of the outermost spore layer: pieces of the puzzle are coming together

Certain endospore-forming soil dwelling bacteria are important human, animal or insect pathogens. These organisms produce spores containing an outer layer, the exosporium. The exosporium is the site of interactions between the spore and the soil environment and between the spore and the infected host during the initial stages of infection. The composition and assembly process of the exosporium are poorly understood. This is partly due to the extreme stability of the exosporium that has proven to be refractive to existing methods to deconstruct the intact structure into its component parts. Although more than 20 proteins have been identified as exosporium-associated, their abundance, relationship to other proteins and the processes by which they are assembled to create the exosporium are largely unknown. In this issue of Molecular Microbiology, Terry, Jiang, and colleagues in Per Bullough's laboratory show that the ExsY protein is a major structural protein of the exosporium basal layer of B. cereus family spores and that it can self-assemble into complex structures that possess many of the structural features characteristic of the exosporium basal layer. The authors refined a model for exosporium assembly. Their findings may have implications for exosporium formation in other spore forming bacteria, including Clostridium species.

The Exosporium Layer of Bacterial Spores: a Connection to the Environment and the Infected Host

Much of what we know regarding bacterial spore structure and function has been learned from studies of the genetically well-characterized bacterium Bacillus subtilis. Molecular aspects of spore structure, assembly, and function are well defined. However, certain bacteria produce spores with an outer spore layer, the exosporium, which is not present on B. subtilis spores. Our understanding of the composition and biological functions of the exosporium layer is much more limited than that of other aspects of the spore. Because the bacterial spore surface is important for the spore's interactions with the environment, as well as being the site of interaction of the spore with the host's innate immune system in the case of spore-forming bacterial pathogens, the exosporium is worthy of continued investigation. Recent exosporium studies have focused largely on members of the Bacillus cereus family, principally Bacillus anthracis and Bacillus cereus. Our understanding of the composition of the exosporium, the pathway of its assembly, and its role in spore biology is now coming into sharper focus. This review expands on a 2007 review of spore surface layers which provided an excellent conceptual framework of exosporium structure and function (A. O. Henriques and C. P. Moran, Jr., Annu Rev Microbiol 61:555-588, 2007, http://dx.doi.org/10.1146/annurev.micro.61.080706.093224). That review began a process of considering outer spore layers as an integrated, multilayered structure rather than simply regarding the outer spore components as independent parts.

Improved proteomic analysis following trichloroacetic acid extraction of Bacillus anthracis spore proteins

Proteomic analysis of bacterial samples provides valuable information about cellular responses and functions under different environmental pressures. Analysis of cellular proteins is dependent upon efficient extraction from bacterial samples, which can be challenging with increasing complexity and refractory characteristics. While no single method can recover 100% of the bacterial proteins, selected protocols can improve overall protein isolation, peptide recovery, or enrichment for certain classes of proteins. The method presented here is technically simple, does not require specialized equipment such as a mechanical disrupter, and is effective for protein extraction of the particularly challenging sample type of Bacillus anthracis Sterne spores. The ability of Trichloroacetic acid (TCA) extraction to isolate proteins from spores and enrich for spore-specific proteins was compared to the traditional mechanical disruption method of bead beating. TCA extraction improved the total average number of proteins identified within a sample as compared to bead beating (547 vs 495, respectively). Further, TCA extraction enriched for 270 spore proteins, including those typically identified by first isolating the spore coat and exosporium layers. Bead beating enriched for 156 spore proteins more typically identified from whole spore proteome analyses. The total average number of proteins identified was equal using TCA or bead beating for easily lysed samples, such as B. anthracis vegetative cells. As with all assays, supplemental methods such as implementation of an alternative preparation method may simplify sample preparation and provide additional insight to the protein biology of the organism being studied.

The spore-associated protein BclA1 affects the susceptibility of animals to colonization and infection by Clostridium difficile

The BclA protein is a major component of the outermost layer of spores of a number of bacterial species and Clostridium difficile carries three bclA genes. Using insertional mutagenesis each gene was characterized and spores devoid of these proteins had surface aberrations, reduced hydrophobicity and germinated faster than wild-type spores. Therefore the BclA proteins were likely major components of the spore surface and when absent impaired the protective shield effect of this outermost layer. Analysis of infection and colonization in mice and hamsters revealed that the 50% infectious dose (ID50 ) of spores was significantly higher (2-logs) in the bclA1(-) mutant compared to the isogenic wild-type control, but that levels of toxins (A and B) were indistinguishable from animals dosed with wild-type spores. bclA1(-) spores germinated faster than wild-type spores yet mice were less susceptible to infection suggesting that BclA1 must play a key role in the initial (i.e. pre-spore germination) stages of infection. We also show that the ID50 was higher in mice infected with R20291, a 'hypervirulent' 027 strain, that carries a truncated BclA1 protein.

Double-color fluorescence in situ hybridization (FISH) for the detection of Bacillus anthracis spores in environmental samples with a novel permeabilization protocol

For anti-bioterrorism measures against the use of Bacillus anthracis, a double-color fluorescence in situ hybridization (FISH) is proposed, for the rapid and specific detection of B. anthracis. The probes were designed based on the differences in 16S and 23S rRNA genes of B. cereus group. A new permeabilization protocol was developed to enhance the permeability of FISH probes into B. anthracis spores. The highest detection rate (90.8 ± 0.69) of B. anthracis spores by FISH was obtained with successive incubation steps with 50% ethanol at 80 °C, a mixture of SDS/DTT solution (10mg/ml SDS, 50mM DTT) at 65 °C and finally in a lysozyme solution (20mg/ml) at 37 °C for 30 min each. This protocol was evaluated for the detection of B. anthracis spores in soil and air samples after adding formalin-fixed spores at different densities. The results have proven the success of double-color FISH in detecting B. anthracis spores in air samples in the range of 10(3) spores/m(3) and above. Conversely, for detecting B. anthracis spores in a soil sample, the lowest detection limit was found to be 10(7) spores/g dry soils. These results confirm the applicability of the developed permeabilization protocol, combined with the double-color FISH technique in specific detection of B. anthracis in soil and air samples.

A genetic approach for the identification of exosporium assembly determinants of Bacillus anthracis

The exosporium is the outermost layer of spores of the zoonotic pathogen Bacillus anthracis. The composition of the exosporium and its functions are only partly understood. Because this outer spore layer is refractive to traditional biochemical analysis, a genetic approach is needed in order to define the proteins which comprise this important spore layer and its assembly pathway. We have created a novel genetic screening system for the identification and isolation of mutants with defects in exosporium assembly during B. anthracis spore maturation. The system is based on the targeting sequence of the BclA exosporium nap layer glycoprotein and a fluorescent reporter. By utilizing this screening system and gene inactivation with Tn916, several novel putative exosporium-associated determinants were identified. A sampling of the mutants obtained was further characterized, confirming their exosporium defect and validating the utility of this screen to identify novel spore determinants in the genome of this pathogen.

Assembly of the BclB glycoprotein into the exosporium and evidence for its role in the formation of the exosporium 'cap' structure in Bacillus anthracis

The outermost layer of the Bacillus anthracis spore consists of an exosporium comprised of an outer hair-like nap layer and an internal basal layer. A major component of the hair-like nap is the glycosylated collagen-like protein BclA. A second collagen-like protein, BclB, is also present in the exosporium. BclB possesses an N-terminal sequence that targets it to the exosporium and is similar in sequence to a cognate targeting region in BclA. BclB lacks, however, sequence similarity to the region of BclA thought to mediate attachment to the basal layer via covalent interactions with the basal layer protein BxpB. Here we demonstrate that BxpB is critical for correct localization of BclB during spore formation and that the N-terminal domains of the BclA and BclB proteins compete for BxpB-controlled assembly sites. We found that BclB is located principally in a region of the exosporium that excludes a short arc on one side of the exosporium (the so-called bottle-cap region). We also found that in bclB mutant spores, the distribution of exosporium proteins CotY and BxpB is altered, suggesting that BclB has roles in exosporium assembly. In bclB mutant spores, the distance between the exosporium and the coat, the interspace, is reduced.

Characterization of a spore-specific protein of the Bacillus cereus group

Bc1245 is a monocistronic chromosomal gene of Bacillus cereus ATCC 14579 encoding a putative protein of 143 amino acids identified in this study to have a spore-related function in B. cereus. Bc1245 is highly conserved in the genome of members of the B. cereus group, indicating an important function of the gene in this group of bacteria. Quantitative PCR revealed that bc1245 is transcribed late in sporulation (upon formation of phase-bright spores) and at the same time as the mother cell-specific transcription factor σ(K) . The σ(K) regulon includes structural components of the spore (such as coat proteins), and it is therefore plausible that bc1245 might encode a structural outer spore protein. This was confirmed by detection of BC1245 in exosporium extracts from B. cereus by immunoblotting against BC1245 antiserum.

Surface layers of Clostridium difficile endospores

Clostridium difficile is an important human pathogen and one where the primary cause of disease is due to the transmission of spores. We have investigated the proteins found in the outer coat layers of C. difficile spores of pathogenic strain 630 (CD630). Five coat proteins, CotA, CotB, CotCB, CotD, and CotE, were shown to be expressed on the outer coat layers of the spore. We demonstrate that purified spores carry catalase, peroxiredoxin, and chitinase activity and that this activity correlates with the predicted functions of three spore coat proteins identified here, CotCB, CotD, and CotE. CotCB and CotD are putative manganese catalases, and CotE is a novel bifunctional protein with peroxiredoxin activity at its amino terminus and chitinase activity at its carboxy terminus. These enzymes could play an important role in coat assembly by polymerizing protein monomers in the coat. CotE, in addition to a role in macromolecular degradation, could play an important role in inflammation, and this may be of direct relevance to the development of the gastrointestinal symptoms that accompany C. difficile infection. Although specific enzyme activity has not yet been assigned to the proteins identified here, this work provides the first detailed study of the C. difficile spore coat.

Localization and assembly of the novel exosporium protein BetA of Bacillus anthracis

The exosporium of Bacillus anthracis is comprised of two distinct layers: a basal layer and a hair-like nap that covers the basal layer. The hair-like nap contains the glycoproteins BclA and, most likely, BclB. BclA and BclB are directed to assemble into the exosporium by motifs in their N-terminal domains. Here, we identify a previously uncharacterized putative gene encoding this motif, which we have named betA (Bacillus exosporium-targeted protein of B. anthracis). Like bclA, betA encodes a putative collagenlike repeat region. betA is present in several genomes of exosporium-producing Bacillus species but, so far, not in any others. Using fluorescence microscopic localization of a BetA-enhanced green fluorescent protein (eGFP) fusion protein and immunofluorescence microscopy with anti-BetA antibodies, we showed that BetA resides in the exosporium basal layer, likely underneath BclA. BetA assembles at the spore surface at around hour 5 of sporulation and under the control of BxpB, similar to the control of deposition of BclA. We suggest a model in which BclA and BetA are incorporated into the exosporium by a mechanism that depends on their similar N termini. These data suggest that BetA is a member of a growing family of exosporium proteins that assemble under the control of targeting sequences in their N termini.