Structural, magnetic and catalytic properties of perovskite-type mixed oxides LaMn1−yCoyO3 (y=0.0, 0.1, 0.3, 0.5, 0.7, 0.9, 1.0)

Development of Ni-doped A-site lanthanides-based perovskite-type oxide catalysts for CO2 methanation by auto-combustion method

Engineering the interfacial interaction between the active metal element and support material is a promising strategy for improving the performance of catalysts toward CO2 methanation. Herein, the Ni-doped rare-earth metal-based A-site substituted perovskite-type oxide catalysts (Ni/AMnO3; A = Sm, La, Nd, Ce, Pr) were synthesized by auto-combustion method, thoroughly characterized, and evaluated for CO2 methanation reaction. The XRD analysis confirmed the perovskite structure and the formation of nano-size particles with crystallite sizes ranging from 18 to 47 nm. The Ni/CeMnO3 catalyst exhibited a higher CO2 conversion rate of 6.6 × 10-5 molCO2 gcat -1 s-1 and high selectivity towards CH4 formation due to the surface composition of the active sites and capability to activate CO2 molecules under redox property adopted associative and dissociative mechanisms. The higher activity of the catalyst could be attributed to the strong metal-support interface, available active sites, surface basicity, and higher surface area. XRD analysis of spent catalysts showed enlarged crystallite size, indicating particle aggregation during the reaction; nevertheless, the cerium-containing catalyst displayed the least increase, demonstrating resilience, structural stability, and potential for CO2 methanation reaction.

Catalytic Oxidation of NO over LaCo1−xBxO3 (B = Mn, Ni) Perovskites for Nitric Acid Production

Nitric acid (HNO3) is an important building block in the chemical industry. Industrial production takes place via the Ostwald process, where oxidation of NO to NO2 is one of the three chemical steps. The reaction is carried out as a homogeneous gas phase reaction. Introducing a catalyst for this reaction can lead to significant process intensification. A series of LaCo1−xMnxO3 (x = 0, 0.25, 0.5 and 1) and LaCo1−yNiyO3 (y = 0, 0.25, 0.50, 0.75 and 1) were synthesized by a sol-gel method and characterized using N2 adsorption, ex situ XRD, in situ XRD, SEM and TPR. All samples had low surface areas; between 8 and 12 m2/g. The formation of perovskites was confirmed by XRD. The crystallite size decreased linearly with the degree of substitution of Mn/Ni for partially doped samples. NO oxidation activity was tested using a feed (10% NO and 6% O2) that partly simulated nitric acid plant conditions. Amongst the undoped perovskites, LaCoO3 had the highest activity; with a conversion level of 24.9% at 350 °C; followed by LaNiO3 and LaMnO3. Substitution of LaCoO3 with 25% mol % Ni or Mn was found to be the optimum degree of substitution leading to an enhanced NO oxidation activity. The results showed that perovskites are promising catalysts for NO oxidation at industrial conditions.