Oxidation of styrene and of some derivatives with H2O2 catalyzed by novel imidazolium-containing manganese porphyrins: A mechanistic and thermodynamic interpretation

Photocatalytic Oxygenation of Heterostilbenes—Batch versus Microflow Reactor

On the basis of earlier results with furan and thiophene derivatives of benzobicyclo[3.2.1]octadiene, photocatalytic oxygenation of novel furo- and thieno heterostilbenes with water-soluble manganese(III) porphyrins offered suitable possibilities to study their reactivities and reaction pathways depending on the heteroatom and the catalyst charge. The experiments were carried out in two reactors types (batch and microflow) to investigate the geometric effects. NMR spectroscopy, GC, and UPLC/MS analyses were applied for identification and quantification of the products. As our results indicated, the 2-thienyl and the common p-tolyl groups in the starting compounds remained intact due to their stronger aromaticity. Hence, the thieno derivative underwent oxygenation only at the open-chain part of the molecule, and the rates of its reactions were much lower than those of the furyl analogue. The less stable furan ring was easily oxygenated, its products with highest ratios were 2-furanon derivatives. Epoxide formation occurred at the open-chain parts of both substrates preferably by the anionic catalyst. Nevertheless, the conversion rates of the substrates were higher with the cationic porphyrin, according to electrophilic attacks by photogenerated Mn(V)=O species. Additionally, the reactions were significantly faster in microflow reactors due to the more favorable circumstances of mass transfer, diffusion, and light penetration.

Rhodamine B oxidation promoted by P450-bioinspired Jacobsen catalysts/cellulose systems

P450-bioinspired Jacobsen/Cell(NEt2) catalysts have been applied in RhB dye oxidation, which is used illegally in food industries of some countries.

Second-Generation Manganese(III) Porphyrins Bearing 3,5-Dichloropyridyl Units: Innovative Homogeneous and Heterogeneous Catalysts for the Epoxidation of Alkenes

The synthesis, characterisation and homogeneous catalytic oxidation results of two manganese(III) porphyrins of the so-called second-generation of metalloporphyrin catalysts, containing one or four 3,5-dichloropyridyl substituents at the meso positions are reported for the first time. The catalytic efficiency of these novel manganese(III) porphyrins was evaluated in the oxidation of cyclooctene and styrene using aqueous hydrogen peroxide as the oxidant, under homogeneous conditions. High conversions were obtained in the presence of both catalysts, obtaining the corresponding epoxide as the major product. The asymmetric metalloporphyrin, chloro[5,10,15-tris(2,6-dichlorophenyl)-20-(3,5-dichloropyridin-4-yl)porphyrinate]manganese(III), CAT-4, evidences a similar activity to that obtained with the well-known and highly efficient second-generation metalloporphyrin catalyst, chloro[5,10,15,20-tetrakis(2,6-dichlorophenyl)porphyrinate]manganese(III), CAT-2. CAT-4 was covalently attached onto Merrifield resin and 3-bromopropylsilica supports. The solid materials obtained were characterized by several techniques including diffuse reflectance, UV—VIS spectrophotometry, SEM and XPS. The catalytic results for the oxidation of cyclooctene and styrene using the immobilized catalysts are also presented. The Merrifield-supported catalyst showed to be very efficient, leading to five catalytic cycles in the oxidation of cyclooctene, using tert-butyl hydroperoxide as the oxidant.

Nitrobenzene method: A keystone in meso-substituted halogenated porphyrin synthesis and applications

This review article briefly describes the available synthetic approaches for meso-arylporphyrins giving particular emphasis for one-pot nitrobenzene and nitrobenzene/NaY methods regarding the synthesis of meso-halogenated arylporphyrins. The review also describes the relevant applications of these halogenated porphyrins and their metalloporphyrin counterparts, prepared via nitrobenzene method, as photosensitizers for therapy (PDT and PDI), diagnostic (molecular contrast agents) and also for catalytic oxidation and CO2 cycloaddition reactions to epoxides.

Ultra-fast and selective oxidation of styrene to benzaldehyde catalyzed by a C-scorpionate Cu(ii) complex

Ultra-fast, selective and eco-friendly synthesis of benzaldehyde by oxidation of styrene catalyzed by a C-scorpionate Cu(ii) complex.

Galactodendritic porphyrinic conjugates as new biomimetic catalysts for oxidation reactions

This work employed [5,10,15,20-tetrakis(pentafluorophenyl)porphyrin] ([H2(TPPF20)], H2P1) as the platform to prepare a tetrasubstituted galactodendritic conjugate porphyrin (H2P3). After metalation with excess copper(II) acetate, H2P3 afforded a new solid porphyrin material, Cu4CuP3S. This work also assessed the ability of the copper(II) complex (CuP3) of H2P3 to coordinate with zinc(II) acetate, to yield the new material Zn4CuP3S. UV-visible, Fourier transform infrared, and electron paramagnetic resonance spectroscopies aided full characterization of the synthesized solids. (Z)-Cyclooctene epoxidation under heterogeneous conditions helped to evaluate the catalytic activity of Cu4CuP3S and Zn4CuP3S. The efficiency of Cu4CuP3S in the oxidation of another organic substrate, catechol, was also investigated. According to the results obtained in the heterogeneous process, Cu4CuP3S mimicked the activity of cytochrome P-450 and catecholase. In addition, Cu4CuP3S was reusable after recovery and reactivation. The data obtained herein were compared with the results achieved for the copper complex (CuP1) of [H2(TPPF20)] and for CuP3 under homogeneous conditions.

New approach for post-functionalization of meso-formylporphyrins

An approach for the transformation of formyl groups into areneimidazoles at a porphyrin substrate is developed, allowing straightforward design of new polytopic porphyrinoid compounds.

Catalytic antioxidant therapy by metallodrugs: lessons from metallocorroles

This article provides a perspective on the utility of metal-based catalytic antioxidants for disease prevention or treatment, with focus on their mode of action and its dependence (DCA) or independence (ICA) on the involvement of cofactors.

Charge-tagged ligands: useful tools for immobilising complexes and detecting reaction species during catalysis

A critical overview is presented on the use of charged tagged ligands (CTLs) as immobilising agents in organometallic catalysis and as probes for studying mechanisms through electrospray ionisation mass spectrometry (ESI-MS) based on the most recent literature.

In recent years, charge-tagged ligands (CTLs) have become valuable tools in organometallic catalysis. Insertion of an ionic side chain into the molecular skeleton of a known ligand has become a useful protocol for anchoring ligands, and consequently catalysts, in polar and ionic liquid phases. In addition, the insertion of a cationic moiety into a ligand is a powerful tool that can be used to detect reaction intermediates in organometallic catalysis through electrospray ionisation mass spectrometry (ESI-MS) experiments. The insertion of an ionic tag ensures the charge in the intermediates independently of the ESI-MS. For this reason, these ligands have been used as ionic probes in mechanistic studies for several catalytic reactions. Here, we summarise selected examples on the use of CTLs as immobilising agents in organometallic catalysis and as probes for studying mechanisms through ESI-MS.

Imidazole and imidazolium porphyrins: gas-phase chemistry of multicharged ions

Electrospray ionization mass spectrometry/mass spectrometry in the positive ion mode was used to investigate the gas-phase chemistry of multicharged ions from solutions of porphyrins with 1,3-dimethylimidazolium-2-yl (DMIM) and 1-methylimidazol-2-yl (MIm) meso-substituents. The studied compounds include two free bases and 12 complexes with transition metals (Cu(II), Zn(II), Mn(III), and Fe(III)). The observed multicharged ions are either preformed or formed during the electrospraying process by reduction or protonation and comprise closed-shell and hypervalent mono-radical and bi-radical ions. The observed extensive and abundant fragmentation of the DMIM and MIm meso-substituents is a characteristic feature of these porphyrins. Fragments with the same mass values can be lost from the meso-substituents either as charged or neutral species and from closed-shell and hypervalent radical ions. Reduction processes are observed for both the free bases and the metallated DMIM porphyrins and occur predominantly by formation of hypervalent radicals that fragment, at low energy collisions, by loss of methyl radicals with formation of the corresponding MIm functionalities. These findings confirm that, when using electrospray ionization, reduction is an important characteristic of cationic meso-substituted tetrapyrrolic macrocycles, always occurring when delocalization of the formed hypervalent radicals is possible. For the Fe(III) and Mn(III) complexes, reduction of the metal centers is also observed as the predominant fragmentation of the corresponding reduced ions through losses of charged fragments testifies. The fragmentation of the closed-shell ions formed by protonation of the MIm porphyrins mirrors the fragmentation of the closed-shell ions of their DMIM counterparts.

Cobalt(iii) sepulchrate complexes: application as sustainable oxidative catalysts

The application of cobalt sepulchrate (sep) complexes as active and robust homogeneous catalysts is reported here for the first time, as well as the crystal structure of the [Co(sep)]₂(SO₄)₃·10H₂O compound.

Mimicking P450 processes and the use of metalloporphyrins

Metalloporphyrins (MPs) are known to catalyze in vitro a broad range of cytochrome P450-mediated reactions occurring in vivo. Most of the biomimetic research using MPs in oxidative catalysis has been directed towards the oxidation of organic compounds presenting significant reactivity features in one functional group. Much less effort has been made to imitate the oxidation of more complex molecules, with a range of functionalities, such as drugs or other xenobiotics. By varying the structure of the porphyrin, the metal ion, the oxidant, and the reaction conditions, it is possible to modulate the regioselectivity of the oxidation reactions. Recently, and along with studies on the synthesis and reactivity of porphyrins, chlorins, and phthalocyanines, our group was able to develop an interesting line of research in the field of biomimetic oxidation of organic compounds using environmentally benign hydrogen peroxide as oxidant and Mn(III) or Fe(III) porphyrin complexes as catalysts. The more up to date results obtained in such work are reviewed here.

Chemical reactions catalyzed by metalloporphyrin-based metal-organic frameworks

The synthetic versatility and the potential application of metalloporphyrins (MP) in different fields have aroused researchers' interest in studying these complexes, in an attempt to mimic biological systems such as cytochrome P-450. Over the last 40 years, synthetic MPs have been mainly used as catalysts for homogeneous or heterogeneous chemical reactions. To employ them in heterogeneous catalysis, chemists have prepared new MP-based solids by immobilizing MP onto rigid inorganic supports, a strategy that affords hybrid inorganic-organic materials. More recently, materials obtained by supramolecular assembly processes and containing MPs as building blocks have been applied in a variety of areas, like gas storage, photonic devices, separation, molecular sensing, magnets, and heterogeneous catalysis, among others. These coordination polymers, known as metal-organic frameworks (MOFs), contain organic ligands or complexes connected by metal ions or clusters, which give rise to a 1-, 2- or 3-D network. These kinds of materials presents large surface areas, Brønsted or redox sites, and high porosity, all of which are desirable features in catalysts with potential use in heterogeneous phases. Building MOFs based on MP is a good way to obtain solid catalysts that offer the advantages of bioinspired systems and zeolitic materials. In this mini review, we will adopt a historical approach to present the most relevant MP-based MOFs applicable to catalytic reactions such as oxidation, reduction, insertion of functional groups, and exchange of organic functions.