Fischer–Tropsch synthesis over cobalt catalysts supported on nanostructured alumina with various morphologies

Natural aluminosilicate nanotubes loaded with RuCo as nanoreactors for Fischer-Tropsch synthesis

Following nanoarchitectural approach, mesoporous halloysite nanotubes with internal surface composed of alumina were loaded with 5-6 nm RuCo nanoparticles by sequential loading/reduction procedure. Ruthenium nanoclusters were loaded inside clay tube by microwave-assisted method followed by cobalt ions electrostatic attraction to ruthenium during wetness impregnation step. Developed nanoreactors with bimetallic RuCo nanoparticles were investigated as catalysts for the Fischer-Tropsch process. The catalyst with 14.3 wt.% of Co and 0.15 wt.% of Ru showed high activity (СO conversion reached 24.6%), low selectivity to methane (11.9%), CO₂ (0.3%), selectivity to C₅₊ hydrocarbons of 79.1% and chain growth index (α) = 0.853. Proposed nanoreactors showed better selectivity to target products combined with high activity in comparison to the similar bimetallic systems supported on synthetic porous materials. It was shown that reducing agent (NaBH₄ or H₂) used to obtain Ru nanoclusters at first synthesis step played a very important role in the reducibility and selectivity of resulting RuCo catalysts.

Ultradeep hydrodesulfurization of fuel over superior NiMoS phases constructed by a novel Ni(MoS4)2(C13H30N)2 precursor

Ni(MoS₄)₂(C₁₃H₃₀N)₂ was synthesized and adopted for preparing a NiMoS/γ-Al₂O₃ hydrodesulfurization catalyst, and the as-prepared catalyst exhibits superior 4,6-dimethyldibenzothiophene hydrodesulfurization activity.

The effect of the nanofibrous Al2O3 aspect ratio on Fischer-Tropsch synthesis over cobalt catalysts

A series of nanofibrous alumina materials with diameters of 4-6 nm and with different aspect ratios ranging from 3 to 16 were prepared. Cobalt impregnated catalysts were prepared by means of incipient wetness impregnation on alumina nanofibers while the 'rearranged' catalysts were prepared by using ultrasonication assistance to mix the fibers with the Co₃O₄ nanoparticles. The effects of the alumina nanofiber aspect ratios on the Co catalyst structure and performance for Fischer-Tropsch synthesis were studied. The pore size of the two series of catalysts increased as the aspect ratio of the alumina nanofiber increased. For impregnated catalysts, large Co₃O₄ particles were formed on the external surface of the alumina support when the aspect ratio was 3 and 5, while the crystallite sizes of Co₃O₄ increased from 13.3 nm to 15.6 nm with the increase of the aspect ratio from 7 to 16. The four 'rearranged' catalysts possessed similar and homogeneously dispersed Co₃O₄ crystallites of 9.5 nm. As expected the reduction behavior of the two series of catalysts was primarily influenced by the Co₃O₄ crystallite size and structure. The FT data of the two series of catalysts indicate that dispersed Co catalysts on alumina nanofibers with large aspect ratios having large inter-crystallite pores significantly improve the catalyst activity and C₅₊ selectivity. The FT data of the 'rearranged' catalysts strongly demonstrated that the internal mass transfer of reactants and products increased with a decrease in inter-crystallite pore size, resulting in a decrease of C₅₊ selectivity and C₃ olefin/paraffin ratio, and an increase of CH₄ selectively, while the CO consumption rate was little altered. Furthermore, catalytic stability tests showed that the alumina nanofibers with larger aspect ratios inhibited Co migration and coalescence in the matrices of the nanofibrous alumina, and this significantly enhanced the stability of the catalyst. The Co_p/Al₂O₃-16 catalyst possessing uniformly distributed cobalt, improved reducibility and large pores is the preferred choice to generate high catalytic activity, stability and C₅₊ selectivity.