Effective sonocatalytic degradation of organic dyes by using Er3+:YAlO3/TiO2–SnO2 under ultrasonic irradiation

Recent Progress and Prospects in Catalytic Water Treatment

Presently, conventional technologies in water treatment are not efficient enough to completely mineralize refractory water contaminants. In this context, the implementation of catalytic processes could be an alternative. Despite the advantages provided in terms of kinetics of transformation, selectivity, and energy saving, numerous attempts have not yet led to implementation at an industrial scale. This review examines investigations at different scales for which controversies and limitations must be solved to bridge the gap between fundamentals and practical developments. Particular attention has been paid to the development of solar-driven catalytic technologies and some other emerging processes, such as microwave assisted catalysis, plasma-catalytic processes, or biocatalytic remediation, taking into account their specific advantages and the drawbacks. Challenges for which a better understanding related to the complexity of the systems and the coexistence of various solid-liquid-gas interfaces have been identified.

PMS activation using reduced graphene oxide under sonication: Efficient metal-free catalytic system for the degradation of rhodamine B, bisphenol A, and tetracycline

This study addresses the influence of ultrasound irradiation on the activation of peroxymonosulfate (PMS) using reduced graphene oxide (rGO) under metal-free conditions for the catalytic degradation of rhodamine B (RhB), bisphenol A (BPA) and tetracycline (TC). Our results revealed that the combination of PMS/rGO and ultrasonication enhanced significantly the degradation rate, reaching full degradation in relatively short times with total organic carbon (TOC) removal exceeding 85% of the investigated pollutants. In contrast, under these experimental conditions, rGO/ultrasound and PMS/ultrasound achieved less than 20% degradation of the same pollutants. Electron paramagnetic resonance (EPR) studies along with quenching experiments suggested that hydroxyl radicals (OH) are the dominant reactive species in the degradation process. Furthermore, inductively coupled plasma atomic emission spectroscopy (ICP-AES) and EPR data revealed the presence of trace manganese (Mn) in rGO. To elucidate the role of Mn on the degradation process, rGO was subjected to hot acid treatment for 48 h to remove trace Mn. While the chemical composition of rGO was not significantly altered by this chemical treatment, the degradation efficiency decreased upon Mn dissolution. The result suggests that trace metal in rGO might account for the efficiency of PMS activation. Finally, plausible degradation pathways were proposed based on LC-MS analysis of the reaction intermediates.

A review on heterogeneous sonocatalyst for treatment of organic pollutants in aqueous phase based on catalytic mechanism

Heterogeneous sonocatalysis, as an emerging advanced oxidation process (AOP), has shown immense potential in water treatment and been widely demonstrated to remove persistent organic compounds in the past decade. The present article aims to provide a comprehensive review on the development of a heterogeneous catalyst for enhancing the ultrasonic degradation rate of organic pollutants from a viewpoint of sonocatalytic mechanism. The rational design and fundamentals for preparing sonocatalysts are presented in the context of facilitating the heterogeneous nucleation and photo-thermal-catalytic effects as well as considering the mechanical stability and separation capacity of the heterogeneous catalyst. In addition, some new trends, ongoing challenges and possible methods to overcome these challenges are also highlighted and proposed.

Heterogeneous sonocatalytic degradation of anazolene sodium by synthesized dysprosium doped CdSe nanostructures

Undoped and Dy-doped CdSe nanoparticles are synthesized and then characterized by the SEM, XRD, FT-IR, XPS and BET methods, which verify successful preparation of the doped catalyst. The sonocatalytic degradation of anazolene sodium as a model azo dye is higher than sonolysis process and the 2% Dy-doped CdSe with band gap of 1.42eV exhibits the greatest sonocatalytic performance. The decolorization efficiency (DE%) of sonocatalysis with 2% Dy-doped CdSe, undoped CdSe and sonolysis after 90min of the process is 91.32%, 56.13% and 39.14%, respectively. In addition, the sonocatalytic degradation of anazolene sodium increases with enhancement of the dopant, catalyst dosage, ultrasonic power, dissolved gasses and decreasing of initial anazolene sodium concentration. Furthermore, with addition of chloroform, sulfate, chloride and ethanol as the radical scavengers, the DE% decreases indicating the controlling mechanism of free radicals for the dye degradation. Besides, the results reveal the appropriate reusability of the catalyst and various degradation by-products are identified using the GC-MS technique. Eventually, the empirical kinetic model is expanded by nonlinear regression analysis for prediction of pseudo first-order constants in various operational conditions.

Preparation of (5.0%)Er3+:Y3Al5O12/Pt-(TiO2-Ta2O5) nanocatalysts and application in sonocatalytic decomposition of ametryn in aqueous solution

(5.0%)Er³⁺:Y₃Al₅O₁₂/Pt-(TiO₂-Ta₂O₅) powder, as a high effective sonocatalyst, was prepared using sol-gel and calcination method. Then it was characterized by X-ray diffractometer (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and energy dispersive X-ray spectroscopy (EDX). In order to evaluate the sonocatalytic activity of the prepared (5.0%)Er³⁺:Y₃Al₅O₁₂/Pt-(TiO₂-Ta₂O₅) powder, the sonocatalytic decomposition of ametryn was studied. In addition, some influencing factors such as different Ti/Ta molar ratios on the sonocatalytic activity of the prepared (5.0%)Er³⁺:Y₃Al₅O₁₂/Pt-(TiO₂-Ta₂O₅) powder, catalyst added amount with ultrasonic irradiation time and used times on the sonocatalytic decomposition efficiency were examined by using ion chromatogram determination. The experimental results showed that the best sonocatalytic decomposition ratio of ametryn were 77.50% based on the N atom calculation and 95.00% based on the S atom calculation, respectively, when the conditions of 10.00mg/L initial concentration, 1.00g/L prepared (5.0%)Er³⁺:Y₃Al₅O₁₂/Pt-(TiO₂-Ta₂O₅) powder (Ti/Ta=1.00:0.25 heat-treated at 550°C for 3.0h) added amount, 150min ultrasonic irradiation (40kHz frequency and 300W output power), 100mL total volume and 25-28°C temperature were adopted. Therefore, the (5.0%)Er³⁺:Y₃Al₅O₁₂/Pt-(TiO₂-Ta₂O₅) composite nanoparticles could be considered as an effective sonocatalyst for decomposition of ametryn in aqueous solution.

Preparation of cube micrometer potassium niobate (KNbO3) by hydrothermal method and sonocatalytic degradation of organic dye

Cube micrometer potassium niobate (KNbO3) powder, as a high effective sonocatalyst, was prepared using hydrothermal method, and then, was characterized by X-ray diffractometer (XRD), scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDX). In order to evaluate the sonocatalytic activity of prepared KNbO3 powder, the sonocatalytic degradation of some organic dyes was studied. In addition, some influencing factors such as heat-treatment temperature and heat-treatment time on the sonocatalytic activity of prepared KNbO3 powder and catalyst added amount and ultrasonic irradiation time on the sonocatalytic degradation efficiency were examined by using UV-visible spectrophotometer and Total Organic Carbon (TOC) determination. The experimental results showed that the best sonocatalytic degradation ratio (69.23%) of organic dyes could be obtained when the conditions of 5.00 mg/L initial concentration, 1.00 g/L prepared KNbO3 powder (heat-treated at 400 °C for 60 min) added amount, 5.00 h ultrasonic irradiation (40 kHz frequency and 300 W output power), 100mL total volume and 25-28 °C temperature were adopted. Therefore, the micrometer KNbO3 powder could be considered as an effective sonocatalyst for treating non- or low-transparent organic wastewaters.

Development of an empirical kinetic model for sonocatalytic process using neodymium doped zinc oxide nanoparticles

The degradation of Acid Blue 92 (AB92) solution was investigated using a sonocatalytic process with pure and neodymium (Nd)-doped ZnO nanoparticles. The nanoparticles were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and X-ray photoelectron spectroscopy (XPS). The 1% Nd-doped ZnO nanoparticles demonstrated the highest sonocatalytic activity for the treatment of AB92 (10 mg/L) with a degradation efficiency (DE%) of 86.20% compared to pure ZnO (62.92%) and sonication (45.73%) after 150 min. The results reveal that the sonocatalytic degradation followed pseudo-first order kinetics. An empirical kinetic model was developed using nonlinear regression analysis to estimate the pseudo-first-order rate constant (kapp) as a function of the operational parameters, including the initial dye concentration (5-25 mg/L), doped-catalyst dosage (0.25-1 g/L), ultrasonic power (150-400 W), and dopant content (1-6% mol). The results from the kinetic model were consistent with the experimental results (R(2)=0.990). Moreover, DE% increases with addition of potassium periodate, peroxydisulfate, and hydrogen peroxide as radical enhancers by generating more free radicals. However, the addition of chloride, carbonate, sulfate, and t-butanol as radical scavengers declines DE%. Suitable reusability of the doped sonocatalyst was proven for several consecutive runs. Some of the produced intermediates were also detected by GC-MS analysis. The phytotoxicity test using Lemna minor (L. minor) plant confirmed the considerable toxicity removal of the AB92 solution after treatment process.

Sonocatalytic degradation of Acid Blue 92 using sonochemically prepared samarium doped zinc oxide nanostructures

Pure and Sm-doped ZnO nanoparticles were synthesized applying a simple sonochemical method. The nanocatalysts were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and X-ray photoelectron spectroscopy (XPS) techniques which confirmed the successful synthesis of the doped sonocatalyst. The sonocatalytic degradation of Acid Blue 92 (AB92), a model azo dye, was more than that with sonolysis alone. The 6% Sm-doped ZnO nanoparticles had a band gap of 2.8 eV and demonstrated the highest activity. The degradation efficiency (DE%) of sonolysis and sonocatalysis with undoped ZnO and 6% Sm-doped ZnO was 45.73%, 63.9%, and 90.10%, after 150 min of treatment, respectively. Sonocatalytic degradation of AB92 is enhanced with increasing the dopant amount and catalyst dosage and with decreasing the initial AB29 concentration. DE% declines with the addition of radical scavengers such as chloride, carbonate, sulfate, and tert-butanol. However, the addition of enhancers including potassium periodates, peroxydisulfate, and hydrogen peroxide improves DE% by producing more free radicals. The results show adequate reusability of the doped sonocatalyst. Degradation intermediates were recognized by gas chromatography-mass spectrometry (GC-MS). Using nonlinear regression analysis, an empirical kinetic model was developed to estimate the pseudo-first-order constants (kapp) as a function of the main operational parameters, including the initial dye concentration, sonocatalyst dosage, and ultrasonic power.

Ultrasonic-assisted degradation of phenazopyridine with a combination of Sm-doped ZnO nanoparticles and inorganic oxidants

Pure and samarium doped ZnO nanoparticles were synthesized by a sonochemical method and characterized by TEM, SEM, EDX, XRD, Pl, and DRS techniques. The average crystallite size of pure and Sm-doped ZnO nanoparticles was about 20 nm. The sonocatalytic activity of pure and Sm-doped ZnO nanoparticles was considered toward degradation of phenazopyridine as a model organic contaminant. The Sm-doped ZnO nanoparticles with Sm concentration of 0.4 mol% indicated a higher sonocatalytic activity (59%) than the pure ZnO (51%) and other Sm-doped ZnO nanoparticles. It was believed that Sm(3+) ion with optimal concentration (0.4 mol%) can act as superficial trapping for electrons in the conduction band of ZnO and delayed the recombination of charge carriers. The influence of the nature and concentration of various oxidants, including periodate, hydrogen peroxide, peroxymonosulfate, and peroxydisulfate on the sonocatalytic activity of Sm-doped ZnO nanoparticles was studied. The influence of the oxidants concentration (0.2-1.4 g L(-1)) on the degradation rate was established by the 3D response surface and the 2D contour plots. The results demonstrated that the utilizing of oxidants in combination with Sm-doped ZnO resulting in rapid removal of contaminant, which can be referable to a dual role of oxidants; (i) scavenging the generated electrons in the conduction band of ZnO and (ii) creating highly reactive radical species under ultrasonic irradiation. It was found that the Sm-doped ZnO and periodate combination is the most efficient catalytic system under ultrasonic irradiation.

Sonocatalytic performance of Er-doped ZnO for degradation of a textile dye

Pure and erbium (Er)-doped ZnO samples were synthesized through a sonochemical method and characterized using X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), UV-Vis spectroscopy, and X-ray photoelectron spectroscopy (XPS) analysis. The synthesized samples were used as a catalyst for the sonocatalytic decolorization of Reactive Orange 29 (RO29) as a model organic pollutant. The decolorization efficiency was 63%, 68%, 88%, and 75% for undoped, 2%, 4%, and 6% Er-doped ZnO, respectively. The effect of different experimental parameters including catalyst content, dye concentration and ultrasound power was investigated on the sonocatalytic decolorization of RO29. Among several radical scavengers (i.e. chloride, carbonate and sulfate anions and t-butanol), the chloride anion showed the most inhibitive effect on the sonocatalysis performance. Improvement of the sonocatalytic process by K2S2O8 and H2O2 enhancers was also studied. The reusability of the synthesized sonocatalyst was evaluated in several consecutive runs, and a decline of only 4% was observed in the process performance after five runs. The intermediates produced during the degradation of RO29 were identified by GC-MS analysis.

Ultrasonic-assisted sol-gel synthesis of samarium, cerium co-doped TiO2 nanoparticles with enhanced sonocatalytic efficiency

In this work, pure TiO2 and samarium, cerium mono-doped and co-doped TiO2 catalysts were synthesized by an ultrasonic-assisted sol-gel method and their sonocatalytic efficiency studied toward removal of Methyl Orange as a model organic pollutant from the textile industry. The relationship of structure and sonocatalytic performance of catalysts was established by using various techniques, such as XRD, TEM, SEM, EDX, DRS, and PL. A comparison on the removal efficiency of sonolysis alone and sonocatalytic processes was performed. The results showed that the samarium, cerium co-doped TiO2 catalyst with narrower band gap energy and smaller particle size leads to a rapid removal of pollutant. It was believed that Sm(3+) and Ce(4+) ions can serve as superficial trapping for electrons at conduction band of TiO2 and prolonged the lifetime of electron-hole pairs. Finally, the effect of synthesis and operational variables on the sonocatalytic activity of co-doped TiO2 catalyst was studied and optimized using response surface methodology as a statistical technique. The results showed that the maximum removal efficiency (96.33%) was achieved at the optimum conditions: samarium content of 0.6 wt%, cerium content of 0.82 wt%, initial pollutant concentration of 4.31 mg L(-1), catalyst dosage of 0.84 mg L(-1), ultrasonic irradiation power of 700 W, and irradiation time of 50 min.

Enhanced ferroelectric-nanocrystal-based hybrid photocatalysis by ultrasonic-wave-generated piezophototronic effect

An electric field built inside a crystal was proposed to enhance photoinduced carrier separation for improving photocatalytic property of semiconductor photocatalysts. However, a static built-in electric field can easily be saturated by the free carriers due to electrostatic screening, and the enhancement of photocatalysis, thus, is halted. To overcome this problem, here, we propose sonophotocatalysis based on a new hybrid photocatalyst, which combines ferroelectric nanocrystals (BaTiO3) and semiconductor nanoparticles (Ag2O) to form an Ag2O-BaTiO3 hybrid photocatalyst. Under periodic ultrasonic excitation, a spontaneous polarization potential of BaTiO3 nanocrystals in responding to ultrasonic wave can act as alternating built-in electric field to separate photoinduced carriers incessantly, which can significantly enhance the photocatalytic activity and cyclic performance of the Ag2O-BaTiO3 hybrid structure. The piezoelectric effect combined with photoelectric conversion realizes an ultrasonic-wave-driven piezophototronic process in the hybrid photocatalyst, which is the fundamental of sonophotocatalysis.

Sonocatalytic removal of an organic dye using TiO2/Montmorillonite nanocomposite

The sonocatalytic performance of the synthesized TiO2/Montmorillonite K10 (TiO2/MMT) nanocomposite was studied in removal of Basic Blue 3 (BB3) from water. The TiO2/MMT nanocomposite was prepared by hydrothermal method. Scanning electron microscope, X-ray diffraction and Fourier transform infrared were used to characterize the synthesized nanocomposite. The average size of TiO2 nanoparticles decreased from 60-80nm to 40-60nm through the immobilization of this semiconductor on the surface of MMT. The obtained results indicated that the sonocatalytic activity of TiO2/MMT nanocomposite was higher than that of pure TiO2 nanoparticles and MMT particles. Furthermore, the main influence factors on the sonocatalytic activity such as the BB3 concentration, pH of solution, TiO2/MMT dose, power of ultrasonic generator, and inorganic salts were studied. The intermediates of BB3 degradation during the sonocatalytic process in the presence of the TiO2/MMT nanocomposite have been monitored by gas chromatography-mass spectrometry.