Silica nanoparticles immobilized benzoylthiourea ferrous complex as an efficient and reusable catalyst for one-pot synthesis of benzopyranopyrimidines

One-Pot Synthesis of Benzopyrano-Pyrimidine Derivatives Catalyzed by P-Toluene Sulphonic Acid and Their Nematicidal and Molecular Docking Study

A cost-effective and environmentally benign benzopyrano-pyrimidine derivative synthesis has been established with the condensation of different salicylaldehyde derivatives, piperidine/morpholine with malononitrile, in the presence of a catalyst containing p-toluene sulphonic acid (PTSA) at 80 °C temperature. This procedure offers a new and enriched approach for synthesizing benzopyrano-pyrimidine derivatives with high yields, a straightforward experimental method, and short reaction times. The synthesized compounds were investigated for their nematocidal activity, and the result shows that among the four compounds, compounds 4 and 5 showed strong nematocidal activity against egg hatching and J2s mortality. The nematocidal efficacy of the compounds might be due to the toxicity of chemicals which are soluble in ethanol. The nematocidal effectiveness was directly related to the concentration of ethanolic dilutions of the compounds, i.e., the maximum treatment concentration, the higher the nematocidal action, or the higher the mortality and egg hatching inhibition. In the present study, with support from docking analysis, the relation between chemical reactivity and nematocidal activity of compound 4 was inferred.

Ruthenium(II)-diphosphine complexes containing acylthiourea ligands are effective against lung and breast cancers

We have synthesized and characterized three new ruthenium(II) diphosphine complexes containing an acylthiourea ligand, with the general formula [Ru(DPEPhos)(O,S)(bipy)]PF₆, where DPEPhos = bis(2-(diphenylphosphino)phenyl)ether, bipy = 2,2'-bipyridine, and O,S = N,N-dimethyl-N'-(benzoyl)thiourea (1), N,N-dimethyl-N'-(furoyl)thiourea (2), and N,N-dimethyl-N'-(thiophenyl)thiourea (3), by several physicochemical techniques. We evaluated the ruthenium complexes for their cytotoxicity against two human cancer cell lines, A549 (lung) and MDA-MB-231 (breast), and two corresponding lines of non-cancer cells, MRC-5 (lung) and MCF-10A (breast). All the complexes are cytotoxic against the cancer cell lines; the IC₅₀ values lie in the micromolar range (0.07-0.70 μM). Ruthenium complex 1 is more selective (7 times more active) toward lung cancer cells (A549) than toward non-cancer cells (MRC-5) and is 160 times more cytotoxic than cisplatin against A549 cells. Investigations of the mechanism of action of complex 1 in A549 cells demonstrated that it inhibits colony formation and promotes cell cycle arrest in the G1 phase and apoptotic cell death. DNA binding studies revealed that complexes 1-3 interact with the biomolecule via minor grooves. These complexes also interact with human serum albumin (HSA) and have affinity for site I by hydrophobic forces. Therefore, this new class of ruthenium complexes can act as cytotoxic agents, mainly for lung cancer treatment.

Random and Positional Immobilization of Multi-enzyme Systems

In recent years, three key techniques including random co-immobilization, positional co-immobilization, and compartmentalization for multi-enzyme immobilization were extensively considered. Herein, we investigate random co-immobilization and positional co-immobilization techniques for multi-enzyme systems in detail. We describe randomly co-immobilized glucose oxidase (GOx) and horseradish peroxidase (HRP) on reduced graphene oxide (rGO) as the most used methods. Materials and methods are presented in terms of preparation of GO and rGO as well as enzyme immobilization procedure. Moreover, the principles of positional co-immobilization have been reviewed, and the relevant methods based on microfluidic systems and DNA structure considering HRP and GOx enzymes have been individually studied. It is believed that the benefits of using the methods associated with random and specifically positional immobilized multi-enzyme systems include not only enhanced cascade enzymatic activity via manipulated surface such as microfluidic systems (including porous materials) and DNA structure but also improved enzyme stability and ease of recovery for recycle.

An efficient CuO/rGO/TiO2 photocatalyst for the synthesis of benzopyranopyrimidine compounds under visible light irradiation

This study reports the synthesis of CuO/rGO/TiO2 in coupling reaction under visible light irradiation. Its photocatalytic performance was explored in a pseudo 4-component and a domino reaction for the synthesis of benzopyranopyrimidine compounds. It can be recovered and recycled for 5 runs.

Multicatalytic Hybrid Materials for Biocatalytic and Chemoenzymatic Cascades—Strategies for Multicatalyst (Enzyme) Co-Immobilization

During recent decades, the use of enzymes or chemoenzymatic cascades for organic chemistry has gained much importance in fundamental and industrial research. Moreover, several enzymatic and chemoenzymatic reactions have also served in green and sustainable manufacturing processes especially in fine chemicals, pharmaceutical, and flavor/fragrance industries. Unfortunately, only a few processes have been applied at industrial scale because of the low stabilities of enzymes along with the problematic processes of their recovery and reuse. Immobilization and co-immobilization offer an ideal solution to these problems. This review gives an overview of all the pathways for enzyme immobilization and their use in integrated enzymatic and chemoenzymatic processes in cascade or in a one-pot concomitant execution. We place emphasis on the factors that must be considered to understand the process of immobilization. A better understanding of this fundamental process is an essential tool not only in the choice of the best route of immobilization but also in the understanding of their catalytic activity.

Synthesis, Characterization, and Catalytic Properties of Magnetic Fe3O4@FU: A Heterogeneous Nanostructured Mesoporous Bio-Based Catalyst for the Synthesis of Imidazole Derivatives

In this protocol, Fucoidan (FU), a fucose-rich sulfated polysaccharide extracted from brown algae Fucus vesiculosus was used for in situ preparation of magnetic Fe₃O₄@FU. Nanoco magnetic properties of Fe₃O₄@FU were investigated by energy dispersive X-ray (EDX) spectroscopy, X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), Brunauer–Emmett–Teller (BET) adsorption method, and vibrating sample magnetometer (VSM). The catalytic activity of Fe₃O₄@FU was employed for the synthesis of tri- and tetra-substituted imidazoles through three- and four-component reactions respectively, between benzyl, aldehydes, NH₄OAc and benzyl, aldehydes, NH₄OAc, and amine under reflux in ethanol. It is worth nothing that excellent yields, short reaction times, chromatography-free purification, and environmental friendliness are highlighted features of this protocol.

Exploiting arginine distributions for the selective and efficient depletion of arginine-rich plasma proteins

The number and arrangement of arginine (Arg) residues in protein chains contribute greatly to the selective capturing of proteins on a designed adsorbent consisting of organic phosphate functionalized fibrous SiO2 microspheres, and the efficient depletion of high abundance Arg-rich protein species from human plasma is achieved.

A decennary update on applications of metal nanoparticles (MNPs) in the synthesis of nitrogen- and oxygen-containing heterocyclic scaffolds

Heterocycles have been found to be of much importance as several nitrogen- and oxygen-containing heterocycle compounds exist amongst the various USFDA-approved drugs. Because of the advancement of nanotechnology, nanocatalysis has found abundant applications in the synthesis of heterocyclic compounds. Numerous nanoparticles (NPs) have been utilized for several organic transformations, which led us to make dedicated efforts for the complete coverage of applications of metal nanoparticles (MNPs) in the synthesis of heterocyclic scaffolds reported from 2010 to 2019. Our emphasize during the coverage of catalyzed reactions of the various MNPs such as Ag, Au, Co, Cu, Fe, Ni, Pd, Pt, Rh, Ru, Si, Ti, and Zn has not only been on nanoparticles catalyzed synthetic transformations for the synthesis of heterocyclic scaffolds, but also provide an inherent framework for the reader to select a suitable catalytic system of interest for the synthesis of desired heterocyclic scaffold.

Rational surface silane modification for immobilizing glucose oxidase

Glucose oxidase (GOx) has many significant applications in biosensor and biocatalysis. In this study, we firstly quantitatively analyzed the binding efficiency of (3-aminopropyl) trimethoxysilane (APTES) modified onto the surface of GOx. It was found that the contents of the grafted silane did not significantly influence the relative activities and tertiary structures of all surface modified GOxs. Immobilization ratio and relative activity of all instances of APTES modified GOx increased, compared with those of native enzyme. However, good stability of immobilized GOx at extreme pH and high temperature could only be obtained when modified protein with low binding silane content. At pH 2.0, the immobilized GOx with low binding content showed a more than 600% activity, compared to the free enzyme. Therefore, rational surface modification would be beneficial to improving the activity and stability of immobilized enzyme as well as increasing loading amount.

A novel, facile, rapid, solvent free protocol for the one pot green synthesis of chromeno[2,3-d]pyrimidines using reusable nano ZnAl2O4– a NOSE approach and photophysical studies

The preparation of an eco-friendly, highly stable, reusable nano ZnAl₂O₄was used as an excellent catalyst for the pseudo four component synthesis of a library of fluorescent chromeno[2,3-d]pyrimidine derivatives.

Covalently anchored 2-amino ethyl-3-propyl imidazolium bromideon SBA-15 as a green, efficient and reusable Brønsted basic ionic liquid nanocatalyst for one-pot solvent-free synthesis of benzopyranopyrimidines under ultrasonic irradiation

Preparation of benzopyranopyrimidine derivatives under ultrasonic irradiation, catalyzed by SBA-IM-NH₂.

Inorganic materials as supports for covalent enzyme immobilization: methods and mechanisms

Several inorganic materials are potentially suitable for enzymatic covalent immobilization, by means of several different techniques. Such materials must meet stringent criteria to be suitable as solid matrices: complete insolubility in water, reasonable mechanical strength and chemical resistance under the operational conditions, the capability to form manageable particles with high surface area, reactivity towards derivatizing/functionalizing agents. Non-specific protein adsorption should be always considered when planning covalent immobilization on inorganic solids. A huge mass of experimental work has shown that silica, silicates, borosilicates and aluminosilicates, alumina, titania, and other oxides, are the materials of choice when attempting enzyme immobilizations on inorganic supports. More recently, some forms of elemental carbon, silicon, and certain metals have been also proposed for certain applications. With regard to the derivatization/functionalization techniques, the use of organosilanes through silanization is undoubtedly the most studied and the most applied, although inorganic bridge formation and acylation with selected acyl halides have been deeply studied. In the present article, the most common inorganic supports for covalent immobilization of the enzymes are reviewed, with particular focus on their advantages and disadvantages in terms of enzyme loadings, operational stability, undesired adsorption, and costs. Mechanisms and methods for covalent immobilization are also discussed, focusing on the most widespread activating approaches (such as glutaraldehyde, cyanogen bromide, divinylsulfone, carbodiimides, carbonyldiimidazole, sulfonyl chlorides, chlorocarbonates, N-hydroxysuccinimides).