Vanadium oxide supported on non-stoichiometric strontium hydroxyapatite catalysts for the oxidative dehydrogenation of n-octane

Design Strategies for Hydroxyapatite-Based Materials to Enhance Their Catalytic Performance and Applicability

Hydroxyapatite (HAP) is a green catalyst that has a wide range of applications in catalysis due to its high flexibility and multifunctionality. These properties allow HAP to accommodate a large number of catalyst modifications that can selectively improve the catalytic performance in target reactions. To date, many studies have been conducted to elucidate the effect of HAP modification on the catalytic activities for various reactions. However, systematic design strategies for HAP catalysts are not established yet due to an incomplete understanding of underlying structure-activity relationships. In this review, tuning methods of HAP for improving the catalytic performance are discussed: 1) ionic composition change, 2) morphology control, 3) incorporation of other metal species, and 4) catalytic support engineering. Detailed mechanisms and effects of structural modulations on the catalytic performances for attaining the design insights of HAP catalysts are investigated. In addition, computational studies to understand catalytic reactions on HAP materials are also introduced. Finally, important areas for future research are highlighted.

Dispersion and Stabilization of Supported Layered Double Hydroxide-Based Nanocomposites on V-Based Catalysts for Nonoxidative Dehydrogenation of Isobutane to Isobutene

Nonoxidative dehydrogenation of isobutane is one of the sustainable strategies for producing high value added isobutene. As alternatives for the commercial Pt- and Cr-based dehydrogenation catalysts, supported V-based catalysts are worthy of study. In this work, a series of VOx/mMgAlO-R catalysts (m = 10, 15, 20, 25 and 30) were designed and prepared by loading VOx on mMgAlO composite oxide supports derived from mesoporous Al2O3-supported layered double hydroxide (LDH) nanocomposites. The calcined and reduced catalysts were characterized by X-ray diffraction (XRD), Raman spectra, Ultraviolet-visible diffuse reflectance (UV-Vis) spectra, NH3 temperature-programmed desorption (NH3-TPD), Temperature-programmed reduction (H2-TPR), X-Ray photoelectron spectroscopy (XPS), thermogravimetric analysis (TG) and low temperature N2 adsorption–desorption isotherms. The as-synthesized VOx/20MgAlO-R with appropriate Mg addition exhibits superior activity (43–56% conversion and 77–81% selectivity), excellent stability and coking-resistance for the isobutane dehydrogenation. The structure–performance relationship reveals that the formation of VOx species confined in the reconstructed LDH interlayer and porous MgO facilitates dispersing and stabilizing the VOx species. The low polymerization degree and higher proportion of V4+ ion for VOx species, strong acidity of medium acid sites and low concentration of strong acid sites are responsible for the excellent anti-coking and catalytic performance. The strong VOx–support interaction is beneficial for enhancing the stability of the catalysts.

Life cycle sustainability assessment of optimized biodiesel production from used rice bran oil employing waste derived-hydroxyapatite supported vanadium catalyst

The present work encompasses the production of biodiesel from an inexpensive waste, viz., used rice bran oil (URBO) through concurrent esterification and transesterification reactions employing the prepared waste duck bone (WDB)-derived natural hydroxyapatite (NAHAp) supported vanadium impregnated solid catalyst (VNAHAp). The optimal VNAHAp catalyst possessed 92.23 m²/g surface area which was much superior to 61.46 m²/g of the V-catalyst (VCHAp) prepared using commercially available hydroxyapatite (CHAp). The optimal (Box-Behnken design) concurrent trans/esterification reaction conditions for biodiesel (FAME) production from URBO and methanol were 5 wt.% catalyst concentration, 8:1 methanol/URBO mole ratio, and 35 wt% NH₄VO₃ loaded VNAHAp (35VNAHAp) catalyst that resulted in 99.05% FAME yield deploying a low-energy infrared radiator assisted batch reactor (LIRABR) which ensured significantly high FAME yield at milder temperature (60°C) and in shorter reaction time (30 min) compared to a conventionally heated batch reactor. The product biodiesel and its blend with commercial diesel conformed to ASTM D7467-10 specifications. The life cycle assessment (LCA) of the entire process advocated superior sustainability of the biodiesel production using 35VNAHAp catalyst in the LIRABR compared to their conventional counterparts. Valorization of two potential wastes, viz., URBO and WDB, under milder process conditions involving LIRABR and 35VNAHAp resulted in lower environmental impacts, thus rendering a sustainable biodiesel production process towards a greener earth.

Non oxidative and oxidative dehydrogenation of n-octane using FePO4: effect of different FePO4 phases on the product selectivity

The activation of n-octane with O₂ has been investigated over different phases of FePO₄ which were formed under dehydrogenation and oxidative dehydrogenation (ODH) conditions.

Incorporation of vanadium into the framework of hydroxyapatites: importance of the vanadium content and pH conditions during the precipitation step

Even though vanadium-modified hydroxyapatite (V-HAp) samples are very promising systems for oxidative dehydrogenation of propane, the incorporation of vanadium into the hydroxyapatite framework was reported to be limited and to lead to over-stoichiometric compounds. Here, the synthesis of a Ca₁₀(PO₄)_6-x(VO₄)_x(OH)₂ stoichiometric solid solution using a co-precipitation method is monitored in the whole composition range (0 ≤ x ≤ 6) by controlling the pH of the precipitation medium, with continuous (the first series of samples) or periodic (the second series of samples) addition of NH₄OH during the precipitation step or during the maturation step, respectively. It is demonstrated that the changes in pH conditions result in materials of a substantial difference in terms of the final composition. From XRD patterns and Rietveld refinements, a solid solution V-HAp phase was found to be exclusively obtained for the first series of samples for x varying from 0 to 6. This also occurred in the second series of samples but only for x lower than 4. For 4 ≤ x ≤ 5.22, the materials were composed of a mixture of V-HAp and Ca₂V₂O₇, whereas for a x value of 6 only Ca₂V₂O₇ was formed. The predominance of polymeric V species in solution at a high vanadium concentration deduced from the diagram of speciation of vanadium accounts for the preferential formation of Ca₂V₂O₇ under these particular conditions. However, provided that a higher pH value was maintained, isolated VO₃(OH)^2- species are predominant, which accounts for the incorporation of isolated vanadates into the hydroxyapatite framework and for the well-controlled stoichiometry with Ca/(P + V) ratios found to be close to 1.67. Such a very good accommodation of vanadium in the hydroxyapatite framework is illustrated by the characterization of the local surrounding of phosphorus and vanadium species using ³¹P and ⁵¹V NMR, Raman and UV-vis spectroscopies.

Cobalt aminodiphosphine complexes as catalysts in the oxidation of n-octane

New cobalt “PNP” aminodiphosphine complexes have been prepared and characterised. They show good catalytic activity in the oxidation of n-octane to C8 oxygenates using tert-butyl hydroperoxide as an oxidant.