Slightly carbomethylated cotton supported TiO2 nanoparticles as self-cleaning fabrics

Antibacterial and UV Protection Properties of Modified Cotton Fabric Using a Curcumin/TiO2 Nanocomposite for Medical Textile Applications

Medical textiles are one of the most rapidly growing parts of the technical textiles sector in the textile industry. This work aims to investigate the medical applications of a curcumin/TiO2 nanocomposite fabricated on the surface of cotton fabric. The cotton fabric was pretreated with three crosslinking agents, namely citric acid, 3-Chloro-2-hydroxypropyl trimethyl ammonium chloride (Quat 188) and 3-glycidyloxypropyltrimethoxysilane (GPTMS), by applying the nanocomposite to the modified cotton fabric using the pad-dry-cure method. The chemistry and morphology of the modified fabrics were examined by Fourier transform infrared spectroscopy, energy-dispersive X-ray spectroscopy, and scanning electron microscopy. In addition, the chemical mechanism for the nanocomposite-modified fabric was reported. UV protection (UPF) and antibacterial properties against Gram-positive S. aureus and Gram-negative E. coli bacterial strains were investigated. The durability of the fabrics to 20 washing cycles was also examined. Results demonstrated that the nanocomposite-modified cotton fabric exhibited superior antibacterial activity against Gram-negative bacteria than Gram-positive bacteria and excellent UV protection properties. Moreover, a good durability was obtained, which was possibly due to the effect of the crosslinker used. Among the three pre-modifications of the cotton fabric, Quat 188 modified fabric revealed the highest antibacterial activity compared with citric acid or GPTMS modified fabrics. This outcome suggested that the curcumin/TiO2 nanocomposite Quat 188-modified cotton fabric could be used as a biomedical textile due to its antibacterial properties.

Which Are the Main Surface Disinfection Approaches at the Time of SARS-CoV-2?

Among many guidelines issued by the World Health Organization to prevent contagion from novel coronavirus (SARS-CoV-2), disinfection of animate and inanimate surfaces has emerged as a key issue. One effective approach to prevent its propagation can be achieved by disinfecting air, skin, or surfaces. A thorough and rational application of an Environmental Protection Agent for disinfection of surfaces, as well as a good personal hygiene, including cleaning hands with appropriate products (e.g., 60–90% alcohol-based product) should minimize transmission of viral respiratory pathogens such as SARS-CoV-2. Critical issues, associated with the potential health hazard of chemical disinfectants and the ineffective duration of most of the treatments, have fostered the introduction of innovative and alternative disinfection approaches. The present review aims to provide an outline of methods currently used for inanimate surface disinfection with a look to the future and a focus on the development of innovative and effective disinfection approaches (e.g., metal nanoparticles, photocatalysis, self-cleaning, and self-disinfection) with particular focus on SARS-CoV-2. The research reviews are, usually, focused on a specific category of disinfection methods, and therefore they are limited. On the contrary, a panoramic review with a wider focus, as the one here proposed, can be an added value for operators in the sector and generally for the scientific community.

A self-cleaning and photocatalytic cellulose-fiber- supported "Ag@AgCl@MOF- cloth'' membrane for complex wastewater remediation

Membrane technology is one of the most promising technologies for wastewater remedy. However, it remains challenging to prepare high-performance membrane matrix for complex pollutants, e.g. containing both oil and organic dye. In this work, we facilely fabricate a cellulose-fiber-supported MOF photocatalytic membrane, namely Ag@AgCl@MIL-100(Fe)/CCF, which was prepared via carboxymethylation of cotton fabric (CCF) as scaffold and in-situ synthesis of MOF derivative as photocatalyst. The carboxymethylation significantly improves the hydrophilicity of cotton fabric and the deposition amount of MIL-100(Fe). The high hydrophilicity of modified CCF and porous MIL-100(Fe) further enable the membrane with an efficient adsorption capacity of dyes and underwater oleophobicity against oils. The photocatalysts Ag@AgCl nanoparticles anchored onto MIL-100(Fe) promote the photocatalytic activity. As a result, the membrane shows simultaneous high removal efficiency towards dyes (97.3 %) and oils (99.64 %). Additionally, thanks to the good photocatalytic activity against organic pollutants, the membrane exhibits excellent self-cleaning and a long-term reuse capacity.

Heterogeneous in situ polymerization of polyaniline (PANI) nanofibers on cotton textiles: Improved electrical conductivity, electrical switching, and tuning properties

Electrically conductive cotton fabric was fabricated by in situ one pot oxidative polymerization of aniline. Using a simple heterogeneous polymerization method, polyaniline (PANI) nano fibers with an average fiber diameter of 40-75 nm were grafted in situ onto cotton fabric. The electrical conductivity of the PANI nanofiber grafted fabric was improved 10 fold compared to fabric grafted with PANI nanoclusters having an average cluster size of 145-315 nm. The surface morphology of the cotton fibers was characterized using SEM and AFM. Electrical conductivity of PANI nanofibers on the cotton textile was further improved from 76 kΏ/cm to 1 kΏ/cm by increasing the HCl concentration from 1 M to 3 M in the polymerization medium. PANI grafted cotton fabrics were analyzed using FTIR, and the data showed the presence of polyaniline functional groups on the treated fabric. Further evidence was present for the chemical interaction of PANI with cellulose. Dopant level and morphology dependent electron transition behavior of PANI nanostructures grafted on cotton fabric was further characterized using UV-vis spectroscopy. The electrical conductivity of the PANI nano fiber grafted cotton fabric can be tuned by immersing the fabric in pH 2 and pH 6 solutions for multiple cycles.

Structure and properties of silk fibroin grafted carboxylic cotton fabric via amide covalent modification

A novel eco-friendly production of silk fibroin-grafted carboxylic cotton fabrics without using any crosslinking agents was developed via the reaction of silk fibroin with oxidized cotton. The effect of reaction parameters on mechanical properties of oxidized fabrics and graft add-on of silk fibroin in grafted fabrics was examined. The results showed that appropriate oxidation time of HNO₃/H₃PO₄-NaNO₂ mixture and grafting time of fibroin were 45min and 2h respectively. FTIR analysis of grafted sample indicated that the CN amido bond was generated through the reaction between primary amines in silk fibroin and carboxyl groups in oxidized cotton, which was further confirmed by XPS spectra. The grafted fabrics were also evaluated for physical properties like tensile strength, wrinkle recovery angle, moisture regain and yellowness index. Cactus flavonoid coated on grafted fabric through treatment with flavonoid extract of cactus, such treated fabric exhibited a highly inhibitory effect against both Staphylococcus aureus and Escherichia coli bacteria.

Is nano ZrO2 a better photocatalyst than nano TiO2 for degradation of plastics?

The environmental accumulation of plastic is a huge problem due to its low degradability.