Oxidation/elimination of heterocyclic sulfur compounds in a biphasic system with mesostructured FeOx/Ti-MCM-41 catalysts

Insights to the oxidative desulfurization process of fossil fuels over organic and inorganic heterogeneous catalysts: advantages and issues

Strict environmental laws have been put in place around the world to reduce the amount of sulfur in the fuel to reduce the emissions of harmful gases from fuel combustion and improve air quality. Therefore, extensive researches have been undertaken to devise effective processes or to improve the desulfurization processes. Among the desulfurization processes, the oxidative desulfurization (ODS) process is a promising method to achieve very low and near-zero sulfur content of the fuel. In this process, sulfur compounds are converted to the corresponding sulfone by a catalyst and in the presence of an oxidant. The obtained compounds by polar solvents or adsorbents are removed from the fuel. In recent decades, extensive studies have been carried out on the catalysts used in the oxidative desulfurization process. In this review, a comprehensive survey has been performed on heterogeneous catalysts used in the oxidative desulfurization process. According to the reported researches, the heterogeneous catalysts used can be divided into five groups: ionic liquids, carbon materials, polyoxometalates, transition metal oxides stabilized on porous solid substrates, and metal-organic frameworks. The proposed mechanisms with different catalysts have also been studied in this work.

Role of SiF groups in enhancing interfacial reaction of Fe-MCM-41 for pollutant removal with ozone

Heterogeneous catalytic ozonation had met the bottlenecks when treating low concentration but high toxic pollutants: (i) the low mass transfer efficiency of ozone and pollutants to hydrophilic catalyst; (ii) the negative impact of coexisted water matrixes. Herein, to enhance the mass transfer efficiency of reactants toward hydrophilic Fe-MCM-41 as well as enhance the interfacial reaction, the fluoride planting Fe-MCM-41 (F-Fe-MCM-41) was synthesized and employed as catalyst in catalytic ozonation for nitrobenzene (NB). Both NB and TOC removal were promoted in F-Fe-MCM-41/O₃ with 99.0 % NB removal in 60 min and 88.6 % TOC removal in 120 min, which were superior to the degradation efficiency by O₃ and Fe-MCM-41/O₃. FTIR, EPR, Mössbauer spectra, ²⁹Si NMR, ¹⁹F NMR et al verified that the replacement of non-reactive silanols (-Si-OH) of Fe-MCM-41 with SiF groups could enhance its hydrophobicity, Lewis acidity and mass transfer effect. Comparative characterizations, experiments and theoretical calculations verified that interfacial reaction played the major role over liquid phase reaction for NB degradation in F-Fe-MCM-41/O₃. Moreover, the strengthened interfacial reaction also reduced the OH scavenging effect of water matrix, such as humic acid and carbonate. The interfacial adjustment method proposed in this study provided a novel insight into catalyst design and water treatment process.

Study on thermal, mechanical and adsorption properties of amine-functionalized MCM-41/PMMA and MCM-41/PS nanocomposites prepared by ultrasonic irradiation

In this study, two common industrial polymers, poly(methyl methacrylate) (PMMA) and polystyrene (PS), were incorporated into amine-functionalized MCM-41 mesoporous silica as reinforcement agents via an ultrasonic assisted method as a facile, fast, eco-friendly, and versatile synthetic tool. Amino functionalization of MCM-41 were performed by 3-aminopropyl triethoxysilane as a coupling agent and it is denoted as APTS-MCM-41. The obtained nanocomposites (NCs), APTS-MCM-41/PMMA and APTS-MCM-41/PS, were characterized by Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), scanning and transmission electron microscopies (SEM and TEM), and thermogravimetric analysis (TGA). Their mechanical properties were also probed via stress-strain curves and improved tensile properties were observed in the NCs relative to the neat polymers. Additionally, APTS-MCM-41/PMMA exhibited better mechanical properties than APTS-MCM-41/PS. Sorption studies were carried out on the two NCs and the effect of different process parameters, namely, pH, contact time, and initial Cd(II) concentration investigated in batch mode. Pseudo-second order and intraparticle diffusion models explain the Cd(II) kinetics more effectively for APTS-MCM-41/PMMA and APTS-MCM-41/PS, respectively. The adsorption isotherm data fitted well to Langmuir isotherm for both NCs and the maximum monolayer adsorption capacities were found to be 24.75mg/g and 10.42mg/g for APTS-MCM-41/PMMA and APTS-MCM-41/PS, respectively. The results demonstrate that the NCs show potential for use in adsorption of heavy metal ion such as Cd(II) from aqueous media.