Biocatalytic capture of CO2 with carbonic anhydrase and its transformation to solid carbonate

Carbonic anhydrase-embedded ZIF-8 membrane reactor with improved the recycling and stability for efficient CO2 capture

Carbonic anhydrase (CA) enzyme-based absorption technology for CO2 capture has been intensively investigated. However, low solubility of CO2 and poor stability of CA severely limits its industrial utilization. Here, hydrolyzed polyacrylonitrile (PAN) membrane (HPAN) was first modified by polyethyleneimine (PEI) with a large number of amino groups, which has a strong affinity for CO2. Then, ZIF-8 was grown in situ on the surface of HPAN/PEI membrane by using the metal chelation of PEI and Zn2+. In this process, CA was embedded inside ZIF-8 by co-precipitation (CA@HPAN/PEI/ZIF-8). The resultant CA@HPAN/PEI/ZIF-8 exhibited high catalytic activity for CO2 capture compared with free CA, which was due to the synergistic enhancement of CO2 capture by PEI and ZIF-8 with high affinity to CO2 and enzymatic catalysis. The yield of CaCO3 by CA@HPAN/PEI/ZIF-8 in the process of one-time conversion of CO2 was 13.6-fold higher than free CA. Furthermore, the CA@HPAN/PEI/ZIF-8 showed better thermal stability, storage and reusability than free CA. Free CA retained only 18.3 % of its original activity after 18 days of storage, whereas CA@HPAN/PEI/ZIF-8 remained 48.7 % of its original activity. The total CaCO3 yield by CA@HPAN/PEI/ZIF-8 was 74.9-fold that of free CA after 8 consecutive rounds of CO2 conversion.

Analysis of the Current State of Research on Bio-Healing Concrete (Bioconcrete)

The relatively small tensile strength of concrete makes this material particularly vulnerable to cracking. However, the reality is that it is not always possible and practically useful to conduct studies on high-quality sealing cracks due to their inaccessibility or small opening width. Despite the fact that currently there are many technologies for creating self-healing cement composites, one of the most popular is the technology for creating a biologically active self-healing mechanism for concrete. It is based on the process of carbonate ion production by cellular respiration or urease enzymes by bacteria, which results in the precipitation of calcium carbonate in concrete. This technology is environmentally friendly and promising from a scientific and practical point of view. This research focuses on the technology of creating autonomous self-healing concrete using a biological crack-healing mechanism. The research methodology consisted of four main stages, including an analysis of the already conducted global studies, ecological and economic analysis, the prospects and advantages of further studies, as well as a discussion and the conclusions. A total of 257 works from about 10 global databases were analyzed. An overview of the physical, mechanical and operational properties of bioconcrete and their changes is presented, depending on the type of active bacteria and the method of their introduction into the concrete mixture. An analysis of the influence of the automatic addition of various types of bacteria on various properties of self-healing bioconcrete is carried out, and an assessment of the influence of the method of adding bacteria to concrete on the process of crack healing is also given. A comparative analysis of various techniques for creating self-healing bioconcrete was performed from the point of view of technical progress, scientific potential, the methods of application of this technology, and their resulting advantages, considered as the factor impacting on strength and life cycle. The main conditions for a quantitative assessment of the sustainability and the possibility of the industrial implementation of the technology of self-healing bioconcrete are identified and presented. Various techniques aimed at improving the recovery process of such materials are considered. An assessment of the influence of the strength of cement mortar after adding bacteria to it is also given. Images obtained using electron microscopy methods are analyzed in relation to the life cycle of bacteria in mineral deposits of microbiological origin. Current gaps and future research prospects are discussed.

Carbonic anhydrase-mimicking metal-organic frameworks built from amino acid and cadmium ions

Built from L-histidine amino acid ligand and cadmium ions, two new 3D chiral metal-organic frameworks, [α-Cd(HIS)] (1) and [β-Cd(HIS)] (2), which contain metal-histidine bonds mimicking the structure features of carbonic anhydrase, demonstrate interesting properties of catalyzing the hydrolysis of p-nitrophenylacetate (p-NPA) to para-nitrophenol (p-NP).

Graphene-based versus alumina supports on CO2 methanation using lanthanum-promoted nickel catalysts

The valorization of CO2 as a biofuel, transforming it through methanation as part of the power-to-gas (P2G) process, will allow the reduction of the net emissions of this gas to the atmosphere. Catalysts with 13 wt.% of nickel (Ni) loading incorporated into alumina and graphene derivatives were used, and the effect of the support on the activity was examined at temperatures between 498 and 773 K and 10 bar of pressure. Among the graphene-based catalysts (13Ni/AGO, 13Ni/BGO, 13Ni/rGO, 13Ni-Ol/GO, 13Ni/Ol-GO, and 13Ni/Ol-GO Met), the highest methane yield was found for 13Ni/rGO (78% at 810 K), being the only system comparable to the catalyst supported on alumina 13Ni/Al2O3 (89.5% at 745 K). The incorporation of 14 wt.% of lanthanum (La) into the most promising supports, rGO and alumina, led to nickel-support interactions that enhanced the catalytic activity of 13Ni/Al2O3 (89.5% at lower temperature, 727 K) but was not effective for 13Ni/rGO. The resistance against deactivation by H2S poisoning was also studied for these catalysts, and a fast deactivation was observed. In addition, activity recovery was impossible despite the regeneration treatment carried out over catalysts. The resistance against deactivation by H2S poisoning was also studied for these catalysts, observing that both suffered a rapid/immediate deactivation and which in addition/unfortunately was impossible to solve despite the regeneration treatment carried out over catalysts.

Impact of bacterial admixtures on the compressive and tensile strengths, permeability, and pore structure of ternary mortars: Comparative study of ureolytic and phototrophic bacteria

The addition of bacterial biomass to cementitious materials can improve strength and permeability properties by altering the pore structure. Photoautotrophic bacteria are understudied mortar bio-additives that do not produce unwanted by-products compared to commonly studied ureolytic species. This study directly compares the impact of the addition of heterotrophic Bacillus subtilis to photoautotrophic Synechocystis sp. PCC6803 on mortar properties and microstructure. Cellulose fibers were used as a bacteria carrier. A commercial concrete healing agent composed of dormant bacterial spores was also tested. Strength, water absorption tests, mercury intrusion porosimetry, differential scanning calorimetry, thermogravimetric analysis, and scanning electron microscopy were applied to experimental mortar properties. The photoautotrophic modifications had a stronger positive impact on mortar strength and permeability properties than sporulated heterotrophic modifications due to differences in surface properties and production of exopolysaccharides. The findings provide support for photoautotrophic species as additives for mortars to move away from ammonia-generating species.

Research status and development of microbial induced calcium carbonate mineralization technology

In nature, biomineralization is a common phenomenon, which can be further divided into authigenic and artificially induced mineralization. In recent years, artificially induced mineralization technology has been gradually extended to major engineering fields. Therefore, by elaborating the reaction mechanism and bacteria of mineralization process, and summarized various molecular dynamics equations involved in the mineralization process, including microbial and nutrient transport equations, microbial adsorption equations, growth equations, urea hydrolysis equations, and precipitation equations. Because of the environmental adaptation stage of microorganisms in sandy soil, their reaction rate in sandy soil environment is slower than that in solution environment, the influencing factors are more different, in general, including substrate concentration, temperature, pH, particle size and grouting method. Based on the characteristics of microbial mineralization such as strong cementation ability, fast, efficient, and easy to control, there are good prospects for application in sandy soil curing, building improvement, heavy metal fixation, oil reservoir dissection, and CO₂ capture. Finally, it is discussed and summarized the problems and future development directions on the road of commercialization of microbial induced calcium carbonate precipitation technology from laboratory to field application.

Advances in Enzyme Induced Carbonate Precipitation and Application to Soil Improvement: A Review

Climate change and global warming have prompted a notable shift towards sustainable geotechnics and construction materials within the geotechnical engineer’s community. Earthen construction materials, in particular, are considered sustainable due to their inherent characteristics of having low embodied and operational energies, fire resistance, and ease of recyclability. Despite these attributes, they have not been part of the mainstream construction due to their susceptibility to water-induced deterioration. Conventional soil improvement techniques are generally expensive, energy-intensive, and environmentally harmful. Recently, biostabilization has emerged as a sustainable alternative that can overcome some of the limitations of existing soil improvement methods. Enzyme-induced carbonate precipitation (EICP) is a particularly promising technique due to its ease of application and compatibility with different soil types. EICP exploits the urease enzyme as a catalyst to promote the hydrolysis of urea inside the pore water, which, in the presence of calcium ions, results in the precipitation of calcium carbonate. The purpose of this paper is to provide a state-of-the-art review of EICP stabilization, highlighting the potential application of this technique to field problems and identifying current research gaps. The paper discusses recent progress, focusing on the most important factors that govern the efficiency of the chemical reactions and the precipitation of a spatially homogenous carbonate phase. The paper also discusses other aspects of EICP stabilization, including the degree of ground improvement, the prediction of the pore structure of the treated soil by numerical simulations, and the remediation of potentially toxic EICP by-products.

A Review on the Performance Evaluation of Autonomous Self-Healing Bacterial Concrete: Mechanisms, Strength, Durability, and Microstructural Properties

The development of cracks, owing to a relatively lower tensile strength of concrete, diverse loading, and environmental factors driving the deterioration of structures, is an inescapable key concern for engineers. Reparation and maintenance operations are thus extremely important to prevent cracks from spreading and mitigating the lifetime of structures. However, ease of access to the cracked zone may be challenging, and it also needs funds and manual power. Hence, autonomous sealing of cracks employing microorganisms into the concrete sans manual intervention is a promising solution to the dilemma of the sustainable improvement of concrete. ‘Ureolytic bacteria’, key organism species in rumen-producing ‘urease’ enzymes such as Bacillus pasteurii or subtilis—when induced—are capable of producing calcium carbonate precipitations into the concrete. As their cell wall is anionic, CaCO3 accumulation on their surface is extensive, and the whole cell, therefore, becomes crystalline and ultimately plugs pores and cracks. This natural induction technique is an environmentally friendly method that researchers are studying intensively. This manuscript reviews the application process of bacterial healing to manufacture autonomous self-healing bacterial concrete. Additionally, it provides a brief review of diverse attributes of this novel concrete which demonstrate the variations with the auto-addition of different bacteria, along with an evaluation of crack healing as a result of the addition of these bacteria directly into concrete or after encapsulation in a protective shell. Comparative assessment techniques for autonomous, bio-based self-healing are also discussed, accompanied by progress, potential, modes of application of this technique, and its resultant benefits in the context of strength and durability. Imperatives for quantitative sustainability assessment and industrial adoption are identified, along with the sealing of artificially cracked cement mortar with sand as a filling material in given spaces, as well as urea and CaCl2 medium treatment with Bacillus pasteurii and Sporosarcina bacteria. The assessment of the impact on the compressive strength and rigidity of cement mortar cubes after the addition of bacteria into the mix is also considered. Scanning electron microscope (SEM) images on the function of bacteria in mineral precipitation that is microbiologically induced are also reviewed. Lastly, future research scope and present gaps are recognised and discussed.

New Biocalcifying Marine Bacterial Strains Isolated from Calcareous Deposits and Immediate Surroundings

Marine bacterial biomineralisation by CaCO3 precipitation provides natural limestone structures, like beachrocks and stromatolites. Calcareous deposits can also be abiotically formed in seawater at the surface of steel grids under cathodic polarisation. In this work, we showed that this mineral-rich alkaline environment harbours bacteria belonging to different genera able to induce CaCO3 precipitation. We previously isolated 14 biocalcifying marine bacteria from electrochemically formed calcareous deposits and their immediate environment. By microscopy and µ-Raman spectroscopy, these bacterial strains were shown to produce calcite-type CaCO3. Identification by 16S rDNA sequencing provided between 98.5 and 100% identity with genera Pseudoalteromonas, Pseudidiomarina, Epibacterium, Virgibacillus, Planococcus, and Bhargavaea. All 14 strains produced carbonic anhydrase, and six were urease positive. Both proteins are major enzymes involved in the biocalcification process. However, this does not preclude that one or more other metabolisms could also be involved in the process. In the presence of urea, Virgibacillus halodenitrificans CD6 exhibited the most efficient precipitation of CaCO3. However, the urease pathway has the disadvantage of producing ammonia, a toxic molecule. We showed herein that different marine bacteria could induce CaCO3 precipitation without urea. These bacteria could then be used for eco-friendly applications, e.g., the formation of bio-cements to strengthen dikes and delay coastal erosion.

Application of Bacillus mucilaginosus in the carbonation of steel slag

The stacking of steel slag has detrimental effects mainly for the waste of resources and the pollution of environment. In this study, a novel method based on microbially induced calcium precipitation (MICP) was proposed by utilizing a type of microorganism named Bacillus mucilaginosus, which could secrete carbonic anhydrase (CA) through the metabolism process, accelerating the hydration of carbon dioxide (CO₂) and thus facilitating the formation of carbonate ions (CO₃^2-). First, comparing the biologically deposited calcium carbonate with the chemically deposited one, it was found that the crystallinity and crystal size of the biological deposition was lower, leading to its cementitious properties. Under the condition of 1 wt. (weight) % dosage, the carbonation degree increased from 66.34 to 86.25% and the compressive strength improved greatly from 7.4 to 11.2 MPa as well. The weight gain rate of biologically carbonated specimens was also twice as much as the directly carbonated ones. This work strongly demonstrated that biological carbonation technology could not only improve the CO₂ sequestration potential of steel slag but also enhance the mechanical properties and durability of steel slag products. KEY POINTS: • Bacillus mucilaginosus could resuscitate and proliferate in the steel slag environment. • B. mucilaginosus secreted carbon anhydrase, which could accelerate the hydration of CO₂ and facilitate the precipitation of calcium carbonate. • Biologically carbonated steel slag had greater mechanical performance than directly carbonated one.

White Rann of Kachchh harbours distinct microbial diversity reflecting its unique biogeography

The understanding of sub-surface soil microbial diversity is limited at both saline and hypersaline ecosystems, even though salinity is found to affect the microbial community in aqueous and terrestrial environment. In this study, a phylo-taxonomy analysis as well as the functional characteristics of microbial community of flat salt basin of White Rann of Kachchh (WR), Gujarat, India was performed along the natural salinity gradient. The high throughput sequencing approach has revealed the numerical abundance of bacteria relative to the archaea. Salinity, TOC, EC and sulphate concentration might be the primary driver of the community distribution along the transect at WR. The much anticipated effect of salinity gradient on the microbial composition surprisingly turned out to be more speculative, with little variance in the community composition along the spatial distance of WR. The metabolic pathways involved in energy metabolism (like carbon, nitrogen, sulphur) along with environmental adaptive genes (like osmotic and oxidative stress response, heat and cold shock genes clusters) were abundantly annotated from shot-gun metagenomic study. The carbonic anhydrase harbouring bacteria Bacillus sp. DM4CA1 was isolated from WR, having a catalytic ability for converting the gaseous carbon dioxide in presence of calcium carbonate into calcite at 25 % higher rate as compared to non-harbouring strains. The enzyme has a role in multiple alternative pathways in microbial metabolism. With the array of results obtained, the study could become the new reference for understanding the diversity structure and functional characteristics of the microbial community of terrestrial saline environment.

Efficient Entrapment of Carbonic Anhydrase in Alginate Hydrogels Using Liposomes for Continuous-Flow Catalytic Reactions

A versatile approach to entrap relatively small enzymes in hydrogels allows their diverse biotechnological applications. In the present work, bovine carbonic anhydrase (BCA) was efficiently entrapped in calcium alginate beads with the help of liposomes. A mixture of sodium alginate (3 wt %) and carbonic anhydrase-liposome conjugates (BCALs) was dripped into a Tris-HCl buffer solution (pH = 7.5) containing 0.4 M CaCl2 to induce the gelation and curing of the dispersed alginate-rich droplets. The entrapment efficiency of BCALs, which was defined as the amount of catalysts entrapped in alginate beads relative to that initially charged, was 98.7 ± 0.2% as determined through quantifying BCALs in the filtrate being separated from the beads. When free BCA was employed, on the other hand, a significantly lower entrapment efficiency of 27.2 ± 4.1% was obtained because free BCA could pass through alginate matrices. Because the volume of a cured alginate bead (10 μL) entrapped with BCALs was about 2.5 times smaller than that of an original droplet, BCALs were densely present in the beads to give the concentrations of lipids and BCA of 4.6-8.3 mM and 1.1-1.8 mg/mL, respectively. Alginate beads entrapped with BCALs were used to catalyze the hydrolysis of 1.0 mM p-nitrophenyl acetate (p-NA) at pH = 7.5 using the wells of a microplate or 10 mL glass beakers as batch reactors. Furthermore, the beads were confined in a column for continuous-flow hydrolysis of 1.0 mM p-NA for 1 h at a mean residence time of 8.5 or 4.3 min. The results obtained demonstrate that the conjugation of BCA to liposomes gave an opportunity to achieve efficient and stable entrapment of BCA in alginate hydrogels for applying to catalytic reactions in bioreactors.

A review on steel slag valorisation via mineral carbonation

Alkaline slags, a waste product of steel industry, provide an opportunity for carbon sequestration and creation of value at the same time. This requires an understanding of the mechanisms of leaching and carbonation.

Pseudomonas aeruginosa β-carbonic anhydrase, psCA1, is required for calcium deposition and contributes to virulence

Calcification of soft tissue leads to serious diseases and has been associated with bacterial chronic infections. However, the origin and the molecular mechanisms of calcification remain unclear. Here we hypothesized that a human pathogen Pseudomonas aeruginosa deposits extracellular calcium, a process requiring carbonic anhydrases (CAs). Transmission electron microscopy confirmed the formation of 0.1-0.2 μm deposits by P. aeruginosa PAO1 growing at 5 mM CaCl₂, and X-ray elemental analysis confirmed they contain calcium. Quantitative analysis of deposited calcium showed that PAO1 deposits 0.35 and 0.75 mM calcium/mg protein when grown at 5 mM and 10 mM CaCl₂, correspondingly. Fluorescent microscopy indicated that deposition initiates at the cell surface. We have previously characterized three PAO1 β-class CAs: psCA1, psCA2, and psCA3 that hydrate CO₂ to HCO₃^-, among which psCA1 showed the highest catalytic activity (Lotlikar et. al. 2013). According to immunoblot and RT-qPCR, growth at elevated calcium levels increases the expression of psCA1. Analyses of the deletion mutants lacking one, two or all three psCA genes, determined that psCA1 plays a major role in calcium deposition and contributes to the pathogen's virulence. In-silico modeling of the PAO1 β-class CAs identified four amino acids that differ in psCA1 compared to psCA2, and psCA3 (T59, A61A, A101, and A108), and these differences may play a role in catalytic rate and thus calcium deposition. A series of inhibitors were tested against the recombinant psCA1, among which aminobenzene sulfonamide (ABS) and acetazolamide (AAZ), which inhibited psCA1 catalytic activity with K_Is of 19 nM and 37 nM, correspondingly. The addition of ABS and AAZ to growing PAO1 reduced calcium deposition by 41 and 78, respectively. Hence, for the first time, we showed that the β-CA psCA1 in P. aeruginosa contributes to virulence likely by enabling calcium salt deposition, which can be partially controlled by inhibiting its catalytic activity.

Alkaliphiles: The Emerging Biological Tools Enhancing Concrete Durability

Concrete is one of the most commonly used building materials ever used. Despite it is a very important and common construction material, concrete is very sensitive to crack formation and requires repair. A variety of chemical-based techniques and materials have been developed to repair concrete cracks. Although the use of these chemical-based repair systems are the best commercially available choices, there have also been concerns related to their use. These repair agents suffer from inefficiency and unsustainability. Most of the products are expensive and susceptible to degradation, exhibit poor bonding to the cracked concrete surfaces, and are characterized by different physical properties such as thermal expansion coefficients which are different to that of concrete. Moreover, many of these repair agents contain chemicals that pose environmental and health hazards. Thus, there has been interest in developing concrete crack repair agents that are efficient, long lasting, safe, and benign to the environment and exhibit physical properties which resemble that of the concrete. The search initiated by these desires brought the use of biomineralization processes as tools in mending concrete cracks. Among biomineralization processes, microbially initiated calcite precipitation has emerged as an interesting alternative to the existing chemical-based concrete crack repairing system. Indeed, results of several studies on the use of microbial-based concrete repair agents revealed the remarkable potential of this approach in the fight against concrete deterioration. In addition to repairing existing concrete cracks, microorganisms have also been considered to make protective surface coating (biodeposition) on concrete structures and in making self-healing concrete.Even though a wide variety of microorganisms can precipitate calcite, the nature of concrete determines their applicability. One of the important factors that determine the applicability of microbes in concrete is pH. Concrete is highly alkaline in nature, and hence the microbes envisioned for this application are alkaliphilic or alkali-tolerant. This work reviews the available information on applications of microbes in concrete: repairing existing cracks, biodeposition, and self-healing. Moreover, an effort is made to discuss biomineralization processes that are relevant to extend the durability of concrete structures. Graphical Abstract.

The Significant Roles of Mg/Ca Ratio, Cl− and SO42− in Carbonate Mineral Precipitation by the Halophile Staphylococcus epidermis Y2

Carbonate precipitation induced by microorganisms has become a hot topic in the field of carbonate sedimentology, although the effects of magnesium on biomineral formation have rarely been studied. In experiments described here, magnesium sulfate and magnesium chloride were used to investigate the significant role played by Mg2+ on carbonate precipitation. In this study, Staphylococcus epidermidis Y2 was isolated and identified by 16S ribosomal DNA (rDNA) homology comparison and ammonia, pH, carbonic anhydrase, carbonate, and bicarbonate ions were monitored during laboratory experiments. The mineral phase, morphology, and elemental composition of precipitates were analyzed by XRD and SEM-EDS. Ultrathin slices of bacteria were analyzed by HRTEM-SAED and STEM. The results show that this bacterium releases ammonia and carbonic anhydrase to increase pH, and raise supersaturation via the large number of carbonate and bicarbonate ions that are released through carbon dioxide hydration catalyzed by carbonic anhydrase. The crystal cell density of monohydrocalcite is lower in a magnesium chloride medium, compared to one of magnesium sulfate. Crystals grow in the mode of a spiral staircase in a magnesium sulfate medium, but in a concentric circular pattern in a magnesium chloride medium. There was no obvious intracellular biomineralization taking place. The results presented here contribute to our understanding of the mechanisms of biomineralization, and to the role of Mg2+ in crystal form.

Comparative study of carbonic anhydrase activity in waters among different geological eco-environments of Yangtze River basin and its ecological significance

This study provides the presence of carbonic anhydrase (CA) activity in waters of the Yangtze River basin, China, as well as the correlation of CA activity with HCO(3)(-) concentration and CO(2) sink flux. Different degrees of CA activity could be detected in almost all of the water samples from different geological eco-environments in all four seasons. The CA activity of water samples from karst areas was significantly higher than from non-karst areas (P<0.01), indicating that the geological type of river basin affected the CA activity of waters. Distinct seasonal changes in CA activity were found, and the variational trend differed among different sampling sites. Generally, CA activity in summer and autumn was higher than in spring (P<0.01) for karst areas. The correlation analysis showed that water CA activity was positively correlated with HCO(3)(-) [corrected] concentration (r=0.672, P<0.01), and that the annual average water CA activity was positively correlated with the CO(2) [corrected] sink flux (r=0.602, P=0.076) in karst areas. This suggests that CA in waters might have a promoting effect on carbon sinks for atmospheric CO(2) in karst river basins. In conditions of similar geological type, higher CA activity was generally detected in water samples taken from areas that exhibited better eco-environments, implying that the CA activity index of waters could be used as an indicator for monitoring ecological environments and protection of river basins. These findings suggest that the role of CA in waters in the karst carbon sink potential of river basins is worthy of further in-depth studies.

Immobilization of carbonic anhydrase on polyvinylidene fluoride membranes

In recent years, the application of carbonic anhydrase (CA) in CO₂ removal has attracted great interest. However, obtaining high enzyme recovery activity is difficult in existing immobilization techniques. In this work, water plasma-treated poly(vinylidene fluoride) (PVDF) membranes were modified via 3-aminopropyl triethoxy silane (KH550) or γ-(2, 3-epoxypropoxy) propyl trimethoxy silane (KH560), and then CA was attached. The immobilization process was optimized, and the catalytic properties of PVDF-attached CA were characterized. The maximum activity recovery of PVDF-KH550-CA was 60%, whereas that of PVDF-KH560-CA was 33%. The K_m values of PVDF-KH550-CA, PVDF-KH560-CA, and free enzyme were 9.97 ± 0.37, 12.5 ± 0.2, and 6.18 ± 0.23 mM, respectively, and their K_cat /K_m values were 206 ± 2, 117 ± 5, and 488 ± 4 M^-1 ·Sec^-1 . PVDF-attached CA shows excellent storage stability and reusability, and their half-life values were 82 and 78 days at 4 °C. At 25 °C, they were 50 and 37 days, respectively. PVDF-KH550-CA and PVDF-KH560-CA retained approximately 85% and 72% of the initial activity after undergoing 10 cycles. In the presence of them, the generation rates of CaCO₃ were 76% and 65% of the free CA system, which were 1.6 and 1.3 times that of the blank system, respectively. Its role in accelerating CO₂ sequestration holds great promise for its practical application.

Trends, application and future prospectives of microbial carbonic anhydrase mediated carbonation process for CCUS

Growing industrialization and the desire for a better economy in countries has accelerated the emission of greenhouse gases (GHGs), by more than the buffering capacity of the earth's atmosphere. Among the various GHGs, carbon dioxide occupies the first position in the anthroposphere and has detrimental effects on the ecosystem. For decarbonization, several non-biological methods of carbon capture, utilization and storage (CCUS) have been in use for the past few decades, but they are suffering from narrow applicability. Recently, CO₂ emission and its disposal related problems have encouraged the implementation of bioprocessing to achieve a zero waste economy for a sustainable environment. Microbial carbonic anhydrase (CA) catalyses reversible CO₂ hydration and forms metal carbonates that mimic the natural phenomenon of weathering/carbonation and is gaining merit for CCUS. Thus, the diversity and specificity of CAs from different micro-organisms could be explored for CCUS. In the literature, more than 50 different microbial CAs have been explored for mineral carbonation. Further, microbial CAs can be engineered for the mineral carbonation process to develop new technology. CA driven carbonation is encouraging due to its large storage capacity and favourable chemistry, allowing site-specific sequestration and reusable product formation for other industries. Moreover, carbonation based CCUS holds five-fold more sequestration capacity over the next 100 years. Thus, it is an eco-friendly, feasible, viable option and believed to be the impending technology for CCUS. Here, we attempt to examine the distribution of various types of microbial CAs with their potential applications and future direction for carbon capture. Although there are few key challenges in bio-based technology, they need to be addressed in order to commercialize the technology.

Microbial Carbonic Anhydrases in Biomimetic Carbon Sequestration for Mitigating Global Warming: Prospects and Perspectives

All the leading cities in the world are slowly becoming inhospitable for human life with global warming playing havoc with the living conditions. Biomineralization of carbon dioxide using carbonic anhydrase (CA) is one of the most economical methods for mitigating global warming. The burning of fossil fuels results in the emission of large quantities of flue gas. The temperature of flue gas is quite high. Alkaline conditions are necessary for CaCO3 precipitation in the mineralization process. In order to use CAs for biomimetic carbon sequestration, thermo-alkali-stable CAs are, therefore, essential. CAs must be stable in the presence of various flue gas contaminants too. The extreme environments on earth harbor a variety of polyextremophilic microbes that are rich sources of thermo-alkali-stable CAs. CAs are the fastest among the known enzymes, which are of six basic types with no apparent sequence homology, thus represent an elegant example of convergent evolution. The current review focuses on the utility of thermo-alkali-stable CAs in biomineralization based strategies. A variety of roles that CAs play in various living organisms, the use of CA inhibitors as drug targets and strategies for overproduction of CAs to meet the demand are also briefly discussed.

Suitability of the alkalistable carbonic anhydrase from a polyextremophilic bacterium Aeribacillus pallidus TSHB1 in biomimetic carbon sequestration

Carbonic anhydrase (CA) was produced from the polyextremophilic (halotolerant, moderately thermophilic and alkaliphilic) bacterium Aeribacillus pallidus TSHB1 isolated from water and sediment samples of Choti Anhoni hot spring of Pipariya, Madhya Pradesh (India), is being reported to be suitable for carbon sequestration. Growth and CA production were inhibited at higher CO2 concentration (5-10 %). Under optimized culture variables (tryptone 0.8 %, yeast extract 0.08 %, glucose 1 %, micronutrient solution 1 %, inoculums size 1.10 %, agitation 200 at pH 8, and temperature 55 °C), 3.7-fold higher CA production was attained than that under unoptimized conditions. The zymogram analysis of the partially purified CA revealed an activity band corresponding to 32 kDa. The enzyme is stable in the pH range between 8.0 and 11.0 with T 1/2 of 40, 15, and 8 min at 60, 70, and 80 °C, respectively. The CA of A. pallidus displayed a marked enhancement in the rate of CaCO3 precipitation from aqueous CO2. The CA-aided formation of CaCO3 was 42.5 mg mg(-1) protein. Scanning electron microscopy revealed the formation of rhomboid calcite crystals. This is the first report on the production and applicability of CA from the polyextremophilic A. pallidus in carbon sequestration.

Accelerating Mineral Carbonation Using Carbonic Anhydrase

Carbonic anhydrase (CA) enzymes have gained considerable attention for their potential use in carbon dioxide (CO2) capture technologies because they are able to catalyze rapidly the interconversion of aqueous CO2 and bicarbonate. However, there are challenges for widespread implementation including the need to develop mineralization process routes for permanent carbon storage. Mineral carbonation of highly reactive feedstocks may be limited by the supply rate of CO2. This rate limitation can be directly addressed by incorporating enzyme-catalyzed CO2 hydration. This study examined the effects of bovine carbonic anhydrase (BCA) and CO2-rich gas streams on the carbonation rate of brucite [Mg(OH)2], a highly reactive mineral. Alkaline brucite slurries were amended with BCA and supplied with 10% CO2 gas while aqueous chemistry and solids were monitored throughout the experiments (hours to days). In comparison to controls, brucite carbonation using BCA was accelerated by up to 240%. Nesquehonite [MgCO3·3H2O] precipitation limited the accumulation of hydrated CO2 species, apparently preventing BCA from catalyzing the dehydration reaction. Geochemical models reproduce observed reaction progress in all experiments, revealing a linear correlation between CO2 uptake and carbonation rate. Data demonstrates that carbonation in BCA-amended reactors remained limited by CO2 supply, implying further acceleration is possible.

Formations of calcium carbonate minerals by bacteria and its multiple applications

Biomineralization is a naturally occurring process in living organisms. In this review, we discuss microbially induced calcium carbonate precipitation (MICP) in detail. In the MICP process, urease plays a major role in urea hydrolysis by a wide variety of microorganisms capable of producing high levels of urease. We also elaborate on the different polymorphs and the role of calcium in the formation of calcite crystal structures using various calcium sources. Additionally, the environmental factors affecting the production of urease and carbonate precipitation are discussed. This MICP is a promising, eco-friendly alternative approach to conventional and current remediation technologies to solve environmental problems in multidisciplinary fields. Multiple applications of MICP such as removal of heavy metals and radionuclides, improve the quality of construction materials and sequestration of atmospheric CO₂ are discussed. In addition, we discuss other applications such as removal of calcium ions, PCBs and use of filler in rubber and plastics and fluorescent particles in stationary ink and stationary markers. MICP technology has become an efficient aspect of multidisciplinary fields. This report not only highlights the major strengths of MICP, but also discusses the limitations to application of this technology on a commercial scale.

Structural and biophysical characterization of the α-carbonic anhydrase from the gammaproteobacterium Thiomicrospira crunogena XCL-2: insights into engineering thermostable enzymes for CO2 sequestration

Biocatalytic CO2 sequestration to reduce greenhouse-gas emissions from industrial processes is an active area of research. Carbonic anhydrases (CAs) are attractive enzymes for this process. However, the most active CAs display limited thermal and pH stability, making them less than ideal. As a result, there is an ongoing effort to engineer and/or find a thermostable CA to fulfill these needs. Here, the kinetic and thermal characterization is presented of an α-CA recently discovered in the mesophilic hydrothermal vent-isolate extremophile Thiomicrospira crunogena XCL-2 (TcruCA), which has a significantly higher thermostability compared with human CA II (melting temperature of 71.9°C versus 59.5°C, respectively) but with a tenfold decrease in the catalytic efficiency. The X-ray crystallographic structure of the dimeric TcruCA shows that it has a highly conserved yet compact structure compared with other α-CAs. In addition, TcruCA contains an intramolecular disulfide bond that stabilizes the enzyme. These features are thought to contribute significantly to the thermostability and pH stability of the enzyme and may be exploited to engineer α-CAs for applications in industrial CO2 sequestration.

Tethering of nicotinamide adenine dinucleotide inside hollow nanofibers for high-yield synthesis of methanol from carbon dioxide catalyzed by coencapsulated multienzymes

Enzymatic conversion of carbon dioxide (CO2) to fuel or chemicals is appealing, but is limited by lack of efficient technology for regeneration and reuse of expensive cofactors. Here we show that cationic polyelectrolyte-doped hollow nanofibers, which can be fabricated via a facile coaxial electrospinning technology, provide an ideal scaffold for assembly of cofactor and multienzymes capable of synthesizing methanol from CO2 through a cascade multistep reaction involving cofactor regeneration. Cofactor and four enzymes including formate, formaldehyde, alcohol, and glutamate dehydrogenases were in situ coencapsulated inside the lumen of hollow nanofibers by involving them in the core-phase solution for coaxial electrospinning, in which cationic polyelectrolyte was predissolved. The polyelectrolyte penetrating across the shell of the hollow nanofibers enabled efficient tethering and retention of cofactor inside the lumen via ion-exchange interactions between oppositely charged polyelectrolytes and cofactor. With carbonic anhydrase assembled on the outer surface of the hollow nanofibers for accelerating hydration of CO2, these five-enzymes-cofactor catalyst system exhibited high activity for methanol synthesis. Compared with methanol yield of only 36.17% using free enzymes and cofactor, the hollow nanofiber-supported system afforded a high value up to 103.2%, the highest reported value so far. It was believed that the linear polyelectrolytes acted as spacers to enhance the shuttling of cofactor between enzymes that were coencapsulated within near vicinity, thus improving the efficiency of the system. The immobilized system showed good stability in reusing. About 80% of its original productivity was retained after 10 reusing cycles, with a cofactor-based cumulative methanol yield reached 940.5%.

One-pot enzymatic conversion of carbon dioxide and utilization for improved microbial growth

We developed a process for one-pot CO2 conversion and utilization based on simple conversion of CO2 to bicarbonate at ambient temperature with no energy input, by using the cross-linking-based composites of carboxylated polyaniline nanofibers (cPANFs) and carbonic anhydrase. Carbonic anhydrase was immobilized on cPANFs via the approach of magnetically separable enzyme precipitate coatings (Mag-EPC), which consists of covalent enzyme attachment, enzyme precipitation, and cross-linking with amine-functionalized magnetic nanoparticles. Mag-EPC showed a half-life of 236 days under shaking, even resistance to 70% ethanol sterilization, and recyclability via facile magnetic separation. For one-pot CO2 conversion and utilization, Mag-EPC was used to accelerate the growth of microalga by supplying bicarbonate from CO2, representing 1.8-fold increase of cell concentration when compared to the control sample. After two repeated uses via simple magnetic separation, the cell concentration with Mag-EPC was maintained as high as the first cycle. This one-pot CO2 conversion and utilization is an alternative as well as complementary process to adsorption-based CO2 capture and storage as an environmentally friendly approach, demanding no energy input based on the effective action of the stabilized enzyme system.

Effect of carbonic anhydrase on silicate weathering and carbonate formation at present day CO₂ concentrations compared to primordial values

It is widely recognized that carbonic anhydrase (CA) participates in silicate weathering and carbonate formation. Nevertheless, it is still not known if the magnitude of the effect produced by CA on surface rock evolution changes or not. In this work, CA gene expression from Bacillus mucilaginosus and the effects of recombination protein on wollastonite dissolution and carbonate formation under different conditions are explored. Real-time fluorescent quantitative PCR was used to explore the correlation between CA gene expression and sufficiency or deficiency in calcium and CO₂ concentration. The results show that the expression of CA genes is negatively correlated with both CO₂ concentration and ease of obtaining soluble calcium. A pure form of the protein of interest (CA) is obtained by cloning, heterologous expression, and purification. The results from tests of the recombination protein on wollastonite dissolution and carbonate formation at different levels of CO₂ concentration show that the magnitudes of the effects of CA and CO₂ concentration are negatively correlated. These results suggest that the effects of microbial CA in relation to silicate weathering and carbonate formation may have increased importance at the modern atmospheric CO₂ concentration compared to 3 billion years ago.

Comparison of alkaline industrial wastes for aqueous mineral carbon sequestration through a parallel reactivity study

Thirty-one alkaline industrial wastes from a wide range of industrial processes were acquired and screened for application in an aqueous carbon sequestration process. The wastes were evaluated for their potential to leach polyvalent cations and base species. Following mixing with a simple sodium bicarbonate solution, chemistries of the aqueous and solid phases were analyzed. Experimental results indicated that the most reactive materials were capable of sequestering between 77% and 93% of the available carbon under experimental conditions in four hours. These materials - cement kiln dust, spray dryer absorber ash, and circulating dry scrubber ash - are thus good candidates for detailed, process-oriented studies. Chemical equilibrium modeling indicated that amorphous calcium carbonate is likely responsible for the observed sequestration. High variability and low reactive fractions render many other materials less attractive for further pursuit without considering preprocessing or activation techniques.

Carbonic anhydrase mediated carbon dioxide sequestration: promises, challenges and future prospects

Anthropogenic activities have substantially increased the level of greenhouse gases (GHGs) in the atmosphere and are contributing significantly to the global warming. Carbon dioxide (CO2 ) is one of the major GHGs which plays a key role in the climate change. Various approaches and methodologies are under investigation to address CO2 capture and sequestration worldwide. Carbonic anhydrase (CA) mediated CO2 sequestration is one of the promising options. Therefore, the present review elaborates recent developments in CA, its immobilization and bioreactor methodologies towards CO2 sequestration using the CA enzyme. The promises and challenges associated with the efficient utilization of CA for CO2 sequestration and scale up from flask to lab-scale bioreactor are critically discussed. Finally, the current review also recommends the possible future needs and directions to utilize CA for CO2 sequestration.

Surface Display of Small Peptides on Escherichia coli for Enhanced Calcite Precipitation Rates

Mineralization has emerged as a promising strategy for long-term carbon sequestration. These processes involve carbon dioxide hydration followed by mineral precipitation. We have explored the production of whole-cell biocatalysts engineered with carbonic anhydrase (CA) activity to accelerate the CO₂ hydration reaction. In this study, short polypeptides were displayed on the surface of E. coli cells and whole-cell biocatalysts containing periplasmically expressed CAs in an attempt to enhance calcite mineral formation. It was found that cells coexpressing recombinant periplasmic CA and surface-displayed GPA peptide (PEVPEGAFDTAI) outperformed other peptide-expressing biocatalysts evaluated in terms of the amount of precipitate formed, as well as the overall formation rate of solids. Cells expressing the Cab CA isoform (BLR-pCab) and Cam isoform (BLR-pCam) with the surface-displayed GPA peptide exhibited 36 and 59% improvements in precipitation amounts, as well as 18 and 60% improvements in overall formation rates, respectively, over similar biocatalysts without GPA expression. The biocatalyst with the best performance was BLR-pCam/GPA, which generated 0.15 g of CaCO₃, while BLR cells generated only 0.08 g of CaCO₃ under the same small batch reaction conditions. The BLR-pCam/GPA cells also exhibited the fastest formation rates, achieving the maximum change in solution turbidity after only 2.2 min, as opposed to 6.3 min for BLR cells. These results demonstrate that synthetic biology approaches can be used to create novel biocatalysts with the ability to enhance both catalysis and precipitation activities.

A review of mineral carbonation technologies to sequester CO2

Mineral carbonation is a promising and at the same time challenging option for the sequestration of anthropogenic CO₂.