Immobilization of catalase onto Eupergit C and its characterization

Catalase immobilization: Current knowledge, key insights, applications, and future prospects - A review

Catalase (CAT), a ubiquitous enzyme in all oxygen-exposed organisms, effectively decomposes hydrogen peroxide (H2O2), a harmful by-product, into water and oxygen, mitigating oxidative stress and cellular damage, safeguarding cellular organelles and tissues. Therefore, CAT plays a crucial role in maintaining cellular homeostasis and function. Owing to its pivotal role, CAT has garnered considerable interest. However, many challenges arise when used, especially in multiple practical processes. "Immobilization", a widely-used technique, can help improve enzyme properties. CAT immobilization offers numerous advantages, including enhanced stability, reusability, and facilitated downstream processing. This review presents a comprehensive overview of CAT immobilization. It starts with discussing various immobilization mechanisms, support materials, advantages, drawbacks, and factors influencing the performance of immobilized CAT. Moreover, the review explores the application of the immobilized CAT in various industries and its prospects, highlighting its essential role in diverse fields and stimulating further research and investigation. Furthermore, the review highlights some of the world's leading companies in the field of the CAT industry and their substantial potential for economic contribution. This review aims to serve as a discerning, source of information for researchers seeking a comprehensive cutting-edge overview of this rapidly evolving field and have been overwhelmed by the size of publications.

Enhanced Hydrogen Peroxide Decomposition in a Continuous-Flow Reactor over Immobilized Catalase with PAES-C

Due to the specificity, high efficiency, and gentleness of enzyme catalysis, the industrial utilization of enzymes has attracted more and more attention. Immobilized enzymes can be recovered/recycled easily compared to their free forms. The primary benefit of immobilization is protection of the enzymes from harsh environmental conditions (e.g., elevated temperatures, extreme pH values, etc.). In this paper, catalase was successfully immobilized in a poly(aryl ether sulfone) carrier (PAES-C) with tunable pore structure as well as carboxylic acid side chains. Moreover, immobilization factors like temperature, time, and free-enzyme dosage were optimized to maximize the value of the carrier and enzyme. Compared with free enzyme, the immobilized-enzyme exhibited higher enzymatic activity (188.75 U g-1, at 30 °C and pH 7) and better thermal stability (at 60 °C). The adsorption capacity of enzyme protein per unit mass carrier was 4.685 mg. Hydrogen peroxide decomposition carried out in a continuous-flow reactor was selected as a model reaction to investigate the performance of immobilized catalase. Immobilized-enzymes showed a higher conversion rate (90% at 8 mL/min, 1 h and 0.2 g) compared to intermittent operation. In addition, PAES-C has been synthesized using dichlorodiphenyl sulfone and the renewable resource bisphenolic acid, which meets the requirements of green chemistry. These results suggest that PAES-C as a carrier for immobilized catalase could improve the catalytic activity and stability of catalase, simplify the separation of enzymes, and exhibit good stability and reusability.

Designing negative feedback loops in enzymatic coacervate droplets

Membraneless organelles within the living cell use phase separation of biomolecules coupled with enzymatic reactions to regulate cellular processes. The diverse functions of these biomolecular condensates motivate the pursuit of simpler in vitro models that exhibit primitive forms of self-regulation based on internal feedback mechanisms. Here, we investigate one such model based on complex coacervation of the enzyme catalase with an oppositely charge polyelectrolyte DEAE-dextran to form pH-responsive catalytic droplets. Upon addition of hydrogen peroxide "fuel", enzyme activity localized within the droplets causes a rapid increase in the pH. Under appropriate conditions, this reaction-induced pH change triggers coacervate dissolution owing to its pH-responsive phase behavior. Notably, this destabilizing effect of the enzymatic reaction on phase separation depends on droplet size owing to the diffusive delivery and removal of reaction components. Reaction-diffusion models informed by the experimental data show that larger drops support larger changes in the local pH thereby enhancing their dissolution relative to smaller droplets. Together, these results provide a basis for achieving droplet size control based on negative feedback between pH-dependent phase separation and pH-changing enzymatic reactions.

Optimization of κ-Selenocarrageenase Production by Pseudoalteromonas sp. Xi13 and Its Immobilization

The bioenzymatic production of selenium oligosaccharides addresses the problems resulting from high molecular weight and poor water solubility of κ-selenocarrageenan, and lays foundation for its application as adjuvant drugs for cancer treatment and food additive. κ-selenocarrageenase extracted from Pseudoalteromonas sp. Xi13 can degrade κ-selenocarrageenan to selenium oligosaccharides. The maximum optimized κ-selenocarrageenase activity using Response Surface Methodology (RSM) was increased by 1.4 times, reaching 8.416 U/mL. To expand applications of the κ-selenocarrageenase in industry, the preparation conditions of it in either lyophilized or immobilized form were investigated. The activity recovery rate of the lyophilized enzyme was >70%, while that of the immobilized enzyme was 62.83%. However, the immobilized κ-selenocarrageenase exhibits good stability after being reused four times, with 58.28% of residual activity. The selenium content of κ-selenocarrageenan oligosaccharides degraded by the immobilized κ-selenocarrageenase was 47.06 µg/g, 8.3% higher than that degraded by the lyophilized enzyme. The results indicate that the immobilized κ-selenocarrageenase is suitable for industrial applications and has commercial potential.

One-step purification of a recombinant beta-galactosidase using magnetic cellulose as a support: Rapid immobilization and high thermal stability

For the first time, this work reported the one-step purification and targeted immobilization process of a β-galactosidase (Gal) with the Cellulose Binding Domain (CBD) tag, by binding it to different magnetic cellulose supports. The process efficiency after β-galactosidase-CBD immobilization on magnetic cellulose-based supports showed values of approximately 90% for all evaluated enzymatic loads. Compared with free Gal, derivatives showed affinity values between β-galactosidase and the substrate 1.2 × higher in the lactose hydrolysis of milk. β-Galactosidase-CBD's oriented immobilization process on supports increased the thermal stability of the immobilized enzyme by up to 7 × . After 15 cycles of reuse, both enzyme preparations showed a relative hydrolysis percentage of 50% of lactose in milk. The oriented immobilization process developed for purifying recombinant proteins containing the CBD tag enabled the execution of both steps simultaneously and quickly and the obtention of β-galactosidases with promising catalytic characteristics for application in the food and pharmaceutical industries.

Immobilization of Camel Liver Catalase on Nanosilver-Coated Cotton Fabric

Nanoparticles have the advantage of a superior surface area to volume ratio, and thus such materials are useful for enzyme immobilization. A silver nanoparticle coated cotton fabric (AgNp-CF) is used to immobilize camel liver catalase in the present work. The effect of loading levels of AgNp inside cotton fabrics on the immobilization of catalase was investigated. The results revealed that a 6 mL loading level of AgNp precursor (silver nitrate, 2 mM) at pH 8 showed the maximum immobilization efficiency (76%). The morphological properties of the cotton fabric (CF), AgNp-CF and AgNp-CF-catalase were characterized by SEM. The reusability of the immobilized enzyme was tested over ten reuses to show a 67% retained function of its initial activity. Compared with the soluble enzyme’s working pH (6.5), a rather broader working pH (6.5–7.0) was observed for the immobilized catalase. Additionally, the optimum working temperature increased from 30 for the soluble enzyme to 40 °C for the immobilized one, indicating thermal stability. The free and immobilized catalase enzyme’s Km values were 22.5 and 25 mM H2O2, respectively, reflecting the enzyme’s effective properties. The inhibitory effect of metal ions on the enzyme activity was higher toward soluble catalase than the immobilized catalase. This work has developed a method for immobilizing catalase to be useful for several applications.

Immobilization of Catalase on Chitosan/ZnO and Chitosan/ZnO/Fe2O3 Nanocomposites: A Comparative Study

The strong catalytic performance, eco-friendly reaction systems, and selectivity of enzyme-based biocatalysts are extremely interesting. Immobilization has been shown to be a good way to improve enzyme stability and recyclability. Chitosan-incorporated metal oxides, among other support matrices, are an intriguing class of support matrices for the immobilization of various enzymes. Herein, the cross-linked chitosan/zinc oxide nanocomposite (CS/ZnO) was synthesized and further improved by adding iron oxide (Fe2O3) nanoparticles. The final cross-linked CS/ZnO/Fe2O3 nanocomposite was used as an immobilized support for catalase and is characterized by SEM, EDS, and FTIR. The nanocomposite CS/ZnO/Fe2O3 enhanced the biocompatibility and immobilized system properties. CS/ZnO/Fe2O3 achieved a higher immobilization yield (84.32%) than CS/ZnO (37%). After 10 repeated cycles, the remaining immobilized catalase activity of CS/ZnO and CS/ZnO/Fe2O3 was 14% and 45%, respectively. After 60 days of storage at 4 °C, the remaining activity of immobilized enzyme onto CS/ZnO and CS/ZnO/Fe2O3 was found to be 32% and 47% of its initial activity. The optimum temperature was noticed to be broad at 25–30 °C for the immobilized enzyme and 25 °C for the free enzyme. Compared with the free enzyme optimum pH (7.0), the optimum pH for the immobilized enzyme was 7.5. The Km and Vmax values for the free and immobilized enzyme on CS/ZnO, and the immobilized enzyme on CS/ZnO/Fe2O3, were found to be 91.28, 225.17, and 221.59 mM, and 10.45, 15.87, and 19.92 µmole ml−1, respectively. Catalase immobilization on CS/ZnO and CS/ZnO/Fe2O3 offers better stability than free catalase due to the enzyme’s half-life. The half-life of immobilized catalase on CS/ZnO/Fe2O3 was between 31.5 and 693.2 min.

Grafted carrageenan: alginate gel beads for catalase enzyme covalent immobilization

A new matrix formulation was devised for catalase immobilization. Carrageenan-alginate beads different ratios were developed and soaked into different ratios of CaCl₂-KCl as a hardening solution. The best formulation for loading capacity was selected, treated with polyethylene imine followed by glutaraldehyde and further studied. The best concentration of catalase for immobilization was 300U/ml and the best loading time was 6 h. The catalytic properties increased after immobilization and the immobilized catalase achieved optimum activity at a temperature range of 30-50 °C that was compared to the optimum activity of free catalase which occurred at 40 °C. Higher catalytic activity of immobilized catalase occurred at alkaline pHs than the free one which achieved optimum catalytic activity at neutral pH. A comparison between the kinetic parameters of immobilized and free catalase showed variation. The K _M and Vmax of the immobilized catalase were 2.4 fold and six times higher than those of free catalase. The results of the study indicate that the formulated matrix can be used as a good matrix for catalase enzyme in various industrial applications.

Production of Propene from n-Butanol: A Three-Step Cascade Utilizing the Cytochrome P450 Fatty Acid Decarboxylase OleTJE

Propene is one of the most important starting materials in the chemical industry. Herein, we report an enzymatic cascade reaction for the biocatalytic production of propene starting from n-butanol, thus offering a biobased production from glucose. In order to create an efficient system, we faced the issue of an optimal cofactor supply for the fatty acid decarboxylase OleTJE , which is said to be driven by either NAD(P)H or H2 O2 . In the first system, we used an alcohol and aldehyde dehydrogenase coupled to OleTJE by the electron-transfer complex putidaredoxin reductase/putidaredoxin, allowing regeneration of the NAD+ cofactor. With the second system, we intended full oxidation of n-butanol to butyric acid, generating one equivalent of H2 O2 that can be used for the oxidative decarboxylation. As the optimal substrate is a long-chain fatty acid, we also tried to create an improved variant for the decarboxylation of butyric acid by using rational protein design. Within a mutational study with 57 designed mutants, we generated the mutant OleTV292I , which showed a 2.4-fold improvement in propene production in our H2 O2 -driven cascade system and reached total turnover numbers >1000.

Reactive Green 5-Decorated Polyacrylamide/Chitosan Cryogel: An Affinity Matrix for Catalase

Acrylamide/chitosan-based cryogel was fabricated, and a triazine dye, Reactive Green 5, was attached to the cryogel by nucleophilic substitution to build a dye affinity support for adsorption of catalase enzyme. Characterization of cryogel was performed using FTIR, SEM, EDX, BET, and swelling test. Synthesized cryogel beared pores with ~ 200 μm in size and the surface area of 11.8 m²/g. Maximum catalase adsorption was (17.6 ± 0.29 mg/g) measured at pH 4.0 and 25 °C. The adsorption sites on the cryogel were saturated at 0.75 mg/mL enzyme concentration. Increased ionic strength caused a decrease in adsorption capacity. Desorption of catalase from cryogel was enabled using 0.5 M NaSCN solution. Consecutive adsorption experiments were carried out fifteen times to evaluate the reusability of the cryogel. Thermal, storage, and operational stabilities of immobilized catalase were higher than the free one. The data produced implicate that catalase-adsorbed dye-affinity cryogel may be used for H₂O₂ detection or removal when necessary. Graphical Abstract.

Designing and investigation of photo-active gellan gum for the efficient immobilization of catalase by entrapment

A photo-active gellan gum (Gel) derivative was developed by amide bond combination with trans-4-[p-(amino)styryl]pyridine (SP). The SP-Gel was cross-linked by UV curing via the intermolecular 2π + 2π cycloaddition of the inserted SP-CH=CH- moieties. The chemical structure of the obtained photo-crosslinkable biopolymer was investigated before and after the UV curing and the progress of the performed 2π + 2π cycloaddition-based cross-linking was detected via UV-visible light spectra. SP-Gel was evaluated as a polymeric matrix for the immobilization of catalase via entrapment technique. The synthesized biopolymer was mixed with the catalase and molded in the form of membranes that were UV cured to encapsulate the enzyme. The membranes were able to entrap 0.75 mg/cm² with retained activity reached above 95%. The immobilized catalase displayed higher thermal stability and higher resistance toward the environmental pH disturbances compared to the free enzyme. Also, despite the observed lower catalase-H₂O₂ affinity upon the entrapment that was indicated from the performed kinetic studies, the reusability and storage stability experiments revealed the economic value of the entire process by preserving around 95% and 83% of the initial catalase activity after the fifth and tenth operation cycles, respectively.

Immobilization of Allantoinase for the Development of an Optical Biosensor of Oxidative Stress States

Allantoin, the natural end product of purine catabolism in mammals, is non-enzymatically produced from the scavenging of reactive oxygen species through the degradation of uric acid. Levels of allantoin in biological fluids are sensitively influenced by the presence of free radicals, making this molecule a candidate marker of acute oxidative stress in clinical analyses. With this aim, we exploited allantoinase—the enzyme responsible for allantoin hydrolization in plants and lower organisms—for the development of a biosensor exploiting a fast enzymatic-chemical assay for allantoin quantification. Recombinant allantoinase was entrapped in a wet nanoporous silica gel matrix and its structural properties, function, and stability were characterized through fluorescence spectroscopy and circular dichroism measurements, and compared to the soluble enzyme. Physical immobilization in silica gel minimally influences the structure and the catalytic efficiency of entrapped allantoinase, which can be reused several times and stored for several months with good activity retention. These results, together with the relative ease of the sol-gel preparation and handling, make the encapsulated allantoinase a good candidate for the development of an allantoin biosensor.

Role of Catalase in Oxidative Stress- and Age-Associated Degenerative Diseases

Reactive species produced in the cell during normal cellular metabolism can chemically react with cellular biomolecules such as nucleic acids, proteins, and lipids, thereby causing their oxidative modifications leading to alterations in their compositions and potential damage to their cellular activities. Fortunately, cells have evolved several antioxidant defense mechanisms (as metabolites, vitamins, and enzymes) to neutralize or mitigate the harmful effect of reactive species and/or their byproducts. Any perturbation in the balance in the level of antioxidants and the reactive species results in a physiological condition called “oxidative stress.” A catalase is one of the crucial antioxidant enzymes that mitigates oxidative stress to a considerable extent by destroying cellular hydrogen peroxide to produce water and oxygen. Deficiency or malfunction of catalase is postulated to be related to the pathogenesis of many age-associated degenerative diseases like diabetes mellitus, hypertension, anemia, vitiligo, Alzheimer's disease, Parkinson's disease, bipolar disorder, cancer, and schizophrenia. Therefore, efforts are being undertaken in many laboratories to explore its use as a potential drug for the treatment of such diseases. This paper describes the direct and indirect involvement of deficiency and/or modification of catalase in the pathogenesis of some important diseases such as diabetes mellitus, Alzheimer's disease, Parkinson's disease, vitiligo, and acatalasemia. Details on the efforts exploring the potential treatment of these diseases using a catalase as a protein therapeutic agent have also been described.

Catalase immobilization onto magnetic multi-walled carbon nanotubes: optimization of crucial parameters using response surface methodology

In this study catalase (CAT) immobilization onto magnetic multi-walled carbon nanotubes (mMWCNTs) was undertaken and response surface methodology (RSM) employed to determine the optimum immobilization conditions.

A chemiluminescence-based catalase assay using H2O2-sensitive CdTe quantum dots

A method is described for the chemiluminescence based determination of the activity of catalase (CAT) using H₂O₂-sensitive CdTe quantum dots (QDs). It is based on the finding that the chemiluminescence (CL) of the CdTe/H₂O₂ system is reduced due to the consumption of H₂O₂ by the catalytic action of CAT. The Michaelis constant is calculated to be 519 ± 27 mM, showing the potential of the method to accurately measure the K_m compared to the standard method. The method does not require QDs to be conjugated to biological/organic molecules and therefore is considered to be a rapid and convenient method for determination of CAT in real samples. At an incubation time of 2 s, the LOD was calculated to be 4.5 unit/mL, with a linear range from 6 to 400 unit/mL. The assay is sensitive, simple, and suitable for practical applications. Graphical abstract Schematic representation of chemiluminescence-based catalase U(CAT) assay using the CdSe QD/H₂O₂ system. The reduction of H₂O₂ is reflected by the chemiluminescence of the QDs. A mechanism is put forward based on the changes in chemiluminescence intensity of the QDs by the consumption of H₂O₂ due to the catalytic action of CAT.

Improvement of Aspergillus flavus saponin hydrolase thermal stability and productivity via immobilization on a novel carrier based on sugarcane bagasse

Soyasapogenol B (SB) is known to have many biological activities such as hepatoprotective, anti-inflammatory, anti-mutagenic, antiviral and anticancer activities. Enzymatic conversion of soyasaponins to SB was carried out using saponin hydrolase (SH) extracted from Aspergillus flavus. The partially purified enzyme was immobilized on different carriers by physical adsorption, covalent binding or entrapment. Among the investigated carriers, Eupergit C and sugarcane bagasse (SCB) activated by DIC and NHS were the most suitable two carriers for immobilization (the immobilized forms recovered 46.5 and 37.1% of the loaded enzyme activity, respectively). Under optimized immobilization conditions, immobilized SH on Eupergit C and on activated SBC recovered 87.7 and 83.3% of its original activity, respectively. Compared to free SH, immobilized SH on Eupergit C and on activated SCB showed higher optimum pH, activation energy, half-lives and lower deactivation constant rate. Also, their SB productivities were improved by 2.3- and 2.2-folds compared to free SH (87.7 and 83.3 vs. 37.5%, respectively). Hence, being SCB more sustainable and an inexpensive material, it can be considered a good alternative to Eupergit C as a support for SH immobilization. SH immobilization on industrially applicable and inexpensive carrier is necessary to improve SB yield and reduce its production cost. The chemical structure of SCB and the resulting cellulose derivatives were studied by ATR-IR spectroscopy. The thermal analysis technique was used to study the chemical treatment of SCB and coupling with the enzyme. This technique confirmed the removal of lignin and hemicellulose by chemical treatment of SCB.

Improved synthesis of isomaltooligosaccharides using immobilized α-glucosidase in organic-aqueous media

α-Glucosidase was immobilized onto an epoxy-activated resin (Eupergit C) to catalyze maltose into isomaltooligosaccharides (IMO), and then the effects of organic-aqueous media on the enzymatic properties of immobilized α-glucosidase were examined. An immobilization efficiency of 79.61% was obtained under the condition of pH 6.0, ionic strength of 2.0 M, and 30 mg of protein/g of resin. The butyl acetate-aqueous biphasic system was found to significantly improve the catalytic activity of the immobilized enzyme and the yield of IMO. The highest yield of IMO (50.83%, w/w) was obtained at pH 4.5 and 55 °C in a butyl acetate/buffer system (25:75, v/v). In addition, the immobilized enzyme particles were distributed into the organic phase after the completion of transglycosylation, which facilitates the separation and recycling use of the immobilized enzyme. Immobilized α-glucosidase retains a robust reusability in this continuous operation model. The present findings are of potential in improving the IMO manufacturing process.

Catalase-Laden Microdevices for Cell-Mediated Enzyme Delivery

Enzymes have been used to treat various human diseases and traumas. However, the therapeutic utility of free enzymes is impeded by their short circulation time, lack of targeting ability, immunogenicity, and inability to cross biological barriers. Cell-mediated drug delivery approach offers the unique capability to overcome these limitations, but the traditional cell-mediated enzyme delivery techniques suffer from drawbacks such as risk of intracellular degradation of and low loading capacity for the payload enzyme. This article presents the development of a novel cell-mediated enzyme delivery technique featuring the use of micrometer-sized disk-shaped particles termed microdevices. The microdevices are fabricated by layer-by-layer assembly and soft lithography with catalase being used as a model therapeutic enzyme. The amount of catalase in the microdevices can be controlled with the number of catalase layers. Catalase in the microdevices is catalytically active, and active catalase is slowly released from the microdevices. Moreover, cell-microdevice complexes are produced by attaching the catalase-laden microdevices to the external surface of both K562 cells and mouse embryonic stem cells. This technique is potentially applicable to other enzymes and cells and promises to be clinically useful.

Improving of catalase stability properties by encapsulation in alginate/Fe3O4 magnetic composite beads for enzymatic removal of H2O2

The aim of this study was enhancing of stability properties of catalase enzyme by encapsulation in alginate/nanomagnetic beads. Amounts of carrier (10-100 mg) and enzyme concentrations (0.25-1.5 mg/mL) were analyzed to optimize immobilization conditions. Also, the optimum temperature (25-50°C), optimum pH (3.0-8.0), kinetic parameters, thermal stability (20-70°C), pH stability (4.0-9.0) operational stability (0-390 min), and reusability were investigated for characterization of the immobilized catalase system. The optimum pH levels of both free and immobilized catalase were 7.0. At the thermal stability studies, the magnetic catalase beads protected 90% activity, while free catalase maintained only 10% activity at 70°C. The thermal profile of magnetic catalase beads was spread over a large area. Similarly, this system indicated the improving of the pH stability. The reusability, which is especially important for industrial applications, was also determined. Thus, the activity analysis was done 50 times in succession. Catalase encapsulated magnetic alginate beads protected 83% activity after 50 cycles.

Electrospun regenerated cellulose nanofibrous membranes surface-grafted with polymer chains/brushes via the atom transfer radical polymerization method for catalase immobilization

In this study, an electrospun regenerated cellulose (RC) nanofibrous membrane with fiber diameters of ∼200-400 nm was prepared first; subsequently, 2-hydroxyethyl methacrylate (HEMA), 2-dimethylaminoethyl methacrylate (DMAEMA), and acrylic acid (AA) were selected as the monomers for surface grafting of polymer chains/brushes via the atom transfer radical polymerization (ATRP) method. Thereafter, four nanofibrous membranes (i.e., RC, RC-poly(HEMA), RC-poly(DMAEMA), and RC-poly(AA)) were explored as innovative supports for immobilization of an enzyme of bovine liver catalase (CAT). The amount/capacity, activity, stability, and reusability of immobilized catalase were evaluated, and the kinetic parameters (Vmax and Km) for immobilized and free catalase were determined. The results indicated that the respective amounts/capacities of immobilized catalase on RC-poly(HEMA) and RC-poly(DMAEMA) nanofibrous membranes reached 78 ± 3.5 and 67 ± 2.7 mg g(-1), which were considerably higher than the previously reported values. Meanwhile, compared to that of free CAT (i.e., 18 days), the half-life periods of RC-CAT, RC-poly(HEMA)-CAT, RC-poly(DMAEMA)-CAT, and RC-poly(AA)-CAT were 49, 58, 56, and 60 days, respectively, indicating that the storage stability of immobilized catalase was also significantly improved. Furthermore, the immobilized catalase exhibited substantially higher resistance to temperature variation (tested from 5 to 70 °C) and lower degree of sensitivity to pH value (tested from 4.0 and 10.0) than the free catalase. In particular, according to the kinetic parameters of Vmax and Km, the nanofibrous membranes of RC-poly(HEMA) (i.e., 5102 μmol mg(-1) min(-1) and 44.89 mM) and RC-poly(DMAEMA) (i.e., 4651 μmol mg(-1) min(-1) and 46.98 mM) had the most satisfactory biocompatibility with immobilized catalase. It was therefore concluded that the electrospun RC nanofibrous membranes surface-grafted with 3-dimensional nanolayers of polymer chains/brushes would be suitable/ideal as efficient supports for high-density and reusable enzyme immobilization.

Activity of catalase adsorbed to carbon nanotubes: effects of carbon nanotube surface properties

Nanomaterials have been studied widely as the supporting materials for enzyme immobilization. However, the interactions between enzymes and carbon nanotubes (CNT) with different morphologies and surface functionalities may vary, hence influencing activities of the immobilized enzyme. To date how the adsorption mechanisms affect the activities of immobilized enzyme is not well understood. In this study the adsorption of catalase (CAT) on pristine single-walled carbon nanotubes (SWNT), oxidized single-walled carbon nanotubes (O-SWNT), and multi-walled carbon nanotubes (MWNT) was investigated. The adsorbed enzyme activities decreased in the order of O-SWNT>SWNT>MWNT. Fourier transforms infrared spectroscopy (FTIR) and circular dichrois (CD) analyses reveal more significant loss of α-helix and β-sheet of MWNT-adsorbed than SWNT-adsorbed CAT. The difference in enzyme activities between MWNT-adsorbed and SWNT-adsorbed CAT indicates that the curvature of surface plays an important role in the activity of immobilized enzyme. Interestingly, an increase of β-sheet content was observed for CAT adsorbed to O-SWNT. This is likely because as opposed to SWNT and MWNT, O-SWNT binds CAT largely via hydrogen bonding and such interaction allows the CAT molecule to maintain the rigidity of enzyme structure and thus the biological function.