Kinetics and mechanism of lipase catalyzed monoacylglycerols synthesis

Application of Stemphylium lycopersici Extracts Immobilized on MCM-48type Mesoporous Materials as Biocatalysts for Monoacylglycerol Production

Monoacylglycerols are eco-friendly and inexpensive emulsifiers with a range of applications. The traditional synthetic route is not eco-friendly, while enzymatic catalysis offers milder reaction conditions and higher selectivity. However, its application still is limited due to the costs. In this context, endophytic fungi can be source to new biocatalysts with enhanced catalytic activity. Based on this perspective, the aim of this study was perform the synthesis of MAG's through transesterification reactions of solketal and different vinyl esters, using crude and immobilized lipolytic extracts from the endophytic fungi Stemphylium lycopersici, isolated from Humiria balsamifera. The reactions were conducted using 100 mg of biocatalyst, 1 mmol of substrates, 9 : 1 n-heptane/acetone, at 40 °C, 200 rpm for 96 h. In the reactions using the ILE and stearate, laureate and decanoate vinyl esters it was possible to obtain the correspondent products with conversion rates of 52-75 %. Also, according to the structure drivers used in MCM-48 synthesis, different morphologies and conversions rates were observed. Employing [C16MI] Cl, [C14MI] Cl and [C4MI] Cl, the 1-lauroyl- glycerol conversion was 36 %, 79 % and 44 %, respectively. This is the first work involving the immobilization of an endophytic fungi and its utilization as a biocatalyst in the production of MAG's.

Temperature-resistant and solvent-tolerant lipases as industrial biocatalysts: Biotechnological approaches and applications

The development of new biocatalytic systems to replace the chemical catalysts, with suitable characteristics in terms of efficiency, stability under high temperature reactions and in the presence of organic solvents, reusability, and eco-friendliness is considered a very important step to move towards the green processes. From this basis, the use of lipase as a catalyst is highly desired for many industrial applications because it offers the reactions in which could be used, stability in harsh conditions, reusability and a greener process. Therefore, the introduction of temperature-resistant and solvent-tolerant lipases have become essential and ideal for industrial applications. Temperature-resistant and solvent-tolerant lipases have been involved in many large-scale applications including biodiesel, detergent, food, pharmaceutical, organic synthesis, biosensing, pulp and paper, textile, animal feed, cosmetics, and leather industry. So, the present review provides a comprehensive overview of the industrial use of lipase. Moreover, special interest in biotechnological and biochemical techniques for enhancing temperature-resistance and solvent-tolerance of lipases to be suitable for the industrial uses.

Rhizopus oryzae Lipase, a Promising Industrial Enzyme: Biochemical Characteristics, Production and Biocatalytic Applications

Lipases are biocatalysts with a significant potential to enable a shift from current pollutant manufacturing processes to environmentally sustainable approaches. The main reason of this prospect is their catalytic versatility as they carry out several industrially relevant reactions as hydrolysis of fats in water/lipid interface and synthesis reactions in solvent-free or non-aqueous media such as transesterification, interesterification and esterification. Because of the outstanding traits of Rhizopus oryzae lipase (ROL), 1,3-specificity, high enantioselectivity and stability in organic media, its application in energy, food and pharmaceutical industrial sector has been widely studied. Significant advances have been made in the biochemical characterisation of ROL particularly in how its activity and stability are affected by the presence of its prosequence. In addition, native and heterologous production of ROL, the latter in cell factories like Escherichia coli, Saccharomyces cerevisiae and Komagataella phaffii (Pichia pastoris), have been thoroughly described. Therefore, in this review, we summarise the current knowledge about R. oryzae lipase (i) biochemical characteristics, (ii) production strategies and (iii) potential industrial applications.

Lipases of Endophytic Fungi Stemphylium lycopersici and Sordaria sp.: Application in the synthesis of solketal derived Monoacylglycerols

Monoacylglycerols (MAGs) are amphiphilic compounds with wide range of applications such as emulsifiers, solubility agents, and chiral building blocks. These compounds are currently produced by chemical approaches involving alkaline glycerolysis or esterification under high temperatures and pressure, resulting in low yields and with by-products. Lipase-catalyzed processes have been alternative tools to provide more ecological approaches since MAGs can be obtained under milder reaction conditions and with higher selectivity. However, just a few papers have been explored the potential of endophytic fungi as lipase sources. In this work we summarized the screening of lipolytic activity of endophytic fungus S. lycopersici and Sordaria spp isolated from vegetal species collected in Jurubatiba Sandbank National Park, RJ, Brazil, as well as its applications as biocatalysts on the lipase-catalyzed synthesis of solketal 1-MAG derivatives. As a result, the crude enzymatic extract of S. lycopersici showed 98 U/mL and 110 U/mL of hydrolytic activity after 72 h and 96 h, respectively, against 74 U/mL (96 h) and, 86 U/mL (120 h) expressed by enzymatic extract of Sordaria spp.. Concerning the esterification activity, both crude enzymatic extracts and lyophilized fungi showed about 80 % conversion into ethyl oleate, in 100 min. On solketal derived 1-MAG synthesis, S. lycopersici both lyophilized and immobilized in polyurethane (PU) forms showed more than 75 % of conversion in the presence and absence of organic solvents. On MAG recycle assays, the PU biocatalyst could be reused after five reaction cycles while for the ethyl oleate synthesis, PU biocatalyst could be reused after six reaction cycles. Both microorganisms, immobilized in polyurethane, were successfully applied as biocatalysts in esterification reactions for solketal 1-MAG derivative production, in a solvent-free media.

Sustainable Enzymatic Synthesis of a Solketal Ester—Process Optimization and Evaluation of Its Antimicrobial Activity

The present study aims the enzymatic synthesis of solketal palmitate by esterification between solketal and palmitic acid using heptane as solvent. Lipases from Thermomyces lanuginosus (TLL), Candida rugosa type VII (CRL), and Pseudomonas fluorescens (PFL) were immobilized via interfacial activation on rice husk silica functionalized with triethoxy(octyl)silane (Octyl–SiO2) and used as biocatalysts. A loading of 20–22 mg of lipase/g of support was immobilized independently of the studied enzyme. TLL–Octyl–SiO2 was the most active biocatalyst in oil hydrolysis (656.0 ± 23.9 U/g) and ester synthesis (productivity of 6.8 mmol/min.gbiocat), and it has been chosen for further ester synthesis optimization. The effect of some important parameters such as biocatalyst concentration, reaction temperature and acid:alcohol molar ratio on the reaction has been evaluated using a central composite rotatable design at fixed mechanical stirring (240 rpm) and reaction time (15 min). Subsequently, the effect of reactants concentration and molecular sieve concentration has also been examined. Under optimal conditions (56 °C, acid:alcohol molar ratio of 1:3 with a palmitic acid concentration of 1 M, and 20% wt. of TLL–Octyl–SiO2 per volume of reaction mixture), 83% acid conversion was obtained after 150 min of reaction. The biocatalyst retained 87% of its initial activity after seven successive reaction batches. The product was identified by nuclear magnetic resonance analysis. Antimicrobial activity studies showed that the synthesized ester demonstrated antifungal activity against Candida albicans and Candida parapsilosis, with minimum inhibitory concentration (MIC) between 200 and 400 µg/mL, and bacteriostatic/fungistatic action—minimum microbicial concentration (MMC) > 400 µg/mL.

Formulation and Structural Study of a Biocompatible Water-in-Oil Microemulsion as an Appropriate Enzyme Carrier: The Model Case of Horseradish Peroxidase

A novel biocompatible water-in-oil microemulsion was developed using nonionic surfactants and was investigated as a potential enzyme delivery system for pharmaceutical applications. The system was composed of isopropyl myristate/polysorbate 80 (Tween 80)/distilled monoglycerides/water/propylene glycol (PG), had a low total surfactant concentration (8.3% w/w), and was able to incorporate approximately 3% w/w aqueous phase containing horseradish peroxidase (HRP). Structural and activity aspects of the system were studied using a variety of techniques such as dynamic light scattering (DLS), electron paramagnetic resonance (EPR), and dynamic interfacial tension. The apparent hydrodynamic diameter of the empty droplets was calculated at about 37 nm. Different enzyme concentrations, ranging from 0.01 to 1.39 μM, were used for both DLS and EPR studies to effectively determine the localization of the macromolecule in the microemulsion. According to the results, for high enzyme concentrations, a participation of HRP in the surfactant monolayer of the microemulsion is evident. The number of reverse micelles in the microemulsion was defined by a theoretical model and was used to clarify how the enzyme concentration affects the number of empty and loaded reverse micelles. To assure that the system allows the enzyme to retain its catalytic activity, an oxidative reaction catalyzed by HRP was successfully carried out with the use of the model substrate 2,2'-azino-bis[3-ethylbenzothiazoline-6-sulfonic acid]. The influence of several parameters such as temperature, pH, and PG concentration was examined to optimize the reaction conditions, and a kinetic study was conducted revealing an ordered-Bi-Bi mechanism. Values of all kinetic parameters were determined. The release of the encapsulated enzyme was studied using an adequate receiver phase, revealing the effectiveness of the proposed microemulsion not only as a microreactor but also as a carrier for therapeutic biomolecules.

Nanoencapsulated Lecitase Ultra and Thermomyces lanuginosus Lipase, a Comparative Structural Study

Two commercially available and widely used enzymes, the parent Thermomyces lanuginosus lipase (TLL) and the shuffled phospholipase A1 Lecitase (Lecitase Ultra), were encapsulated in AOT/isooctane reverse micelles and evaluated regarding their structure and activity. Preparations were also tested as effective biocatalysts. Small-angle X-ray scattering (SAXS), electronic paramagnetic resonance (EPR), and fluorescence spectroscopy were the techniques applied to assess the effects of enzyme incorporation to a reverse micellar nanostructure. SAXS analysis showed that the radius of gyration (Rg) changed from 16 to 38 Å, as the water content (w0) increased. Elongated shapes were more commonly observed than spherical shapes after enzyme encapsulation. EPR studies indicated that enzymes do not participate in the interface, being located in the aqueous center. Fluorescence energy transfer showed that TLL is located in the water core, whereas Lecitase Ultra is closer to the interface. Enzymatic activity toward a standard esterification reaction endured after the enzyme was incorporated into the micelles. The activity of TLL for systems with w0 15 showed the highest conversion yield, 38% in 2 h, while the system with w0 10 showed the highest initial velocity, 0.43 μM/min. This last system had a Rg of 19.3 Å, similar to that of the TLL monomer. Lecitase Ultra showed the highest conversion yields in systems with w0 10, 55% in 2 h. However, the initial rate was much lower than that of TLL, suggesting less affinity for the substrates, which is expected since Lecitase Ultra is a phospholipase. In summary, we here used several spectroscopic and scattering techniques to reveal the shape and stability of TTL and Lecitase Ultra encapsulated systems, which allowed the selection of w0 values to provide optimized enzymatic activity.

Potential use of avocado oil on structured lipids MLM-type production catalysed by commercial immobilised lipases

Structured Lipids are generally constituents of functional foods. Growing demands for SL are based on a fuller understanding of nutritional requirements, lipid metabolism, and improved methods to produce them. Specifically, this work was aimed to add value to avocado oil by producing dietary triacylglycerols (TAG) containing medium-chain fatty acids (M) at positions sn-1,3 and long-chain fatty acids (L) at position sn-2. These MLM-type structured lipids (SL) were produced by interesterification of caprylic acid (CA) (C8:0) and avocado oil (content of C18:1). The regiospecific sn-1,3 commercial lipases Lipozyme RM IM and TL IM were used as biocatalysts to probe the potential of avocado oil to produce SL. Reactions were performed at 30–50°C for 24 h in solvent-free media with a substrate molar ratio of 1∶2 (TAG:CA) and 4–10% w/w enzyme content. The lowest incorporation of CA (1.1% mol) resulted from Lipozyme RM IM that was incubated at 50°C. The maximum incorporation of CA into sn-1,3 positions of TAG was 29.2% mol. This result was obtained at 30°C with 10% w/w Lipozyme TL IM, which is the highest values obtained in solvent-free medium until now for structured lipids of low-calories. This strategy opens a new market to added value products based on avocado oil.