Insight into the mechanism behind the activation phenomenon of lipase from Thermus thermophilus HB8 in polar organic solvents

Engineered Geobacillus lipolytic enzymes - Attractive polyesterases that degrade polycaprolactones and simultaneously produce esters

Plastic pollution is one of the biggest environmental problems plaguing the modern world. Polyester-based plastics contribute significantly to this ecological safety concern. In this study, lipolytic biocatalysts GD-95RM and GDEst-lip developed based on lipase/esterase produced by Geobacillus sp. 95 strain were applied for the degradation of polycaprolactone films (Mn 45.000 (PCL45000) and Mn 80.000 (PCL80000)). The degradation efficiency was significantly enhanced by the addition of short chain alcohols. Lipase GD-95RM (1 mg) can depolymerize 264.0 mg and 280.7 mg of PCL45000 and PCL80000, films respectively, in a 24 h period at 30 °C, while the fused enzyme GDEst-lip (1 mg) is capable of degrading 145.5 mg PCL45000 and 134.0 mg of PCL80000 films in 24 h. The addition of ethanol (25 %) improves the degradation efficiency ~2.5 fold in the case of GD-95RM. In the case of GDEst-lip, 50 % methanol was found to be the optimal alcohol solution and the degradation efficiency was increased by ~3.25 times. The addition of alcohols not only increased degradation speeds but also allowed for simultaneous synthesis of industrially valuable 6-hydroxyhexonic acid esters. The suggested system is an attractive approach for removing of plastic waste and supports the principles of bioeconomics.

Enzymatic Characterization of a Novel HSL Family IV Esterase EstD04 from Pseudomonas sp. D01 in Mealworm Gut Microbiota

Pseudomonas sp. D01, capable of growing in tributyrin medium, was isolated from the gut microbiota of yellow mealworm. By using in silico analyses, we discovered a hypothesized esterase encoding gene in the D01 bacterium, and its encoded protein, EstD04, was classified as a bacterial hormone-sensitive lipase (bHSL) of the type IV lipase family. The study revealed that the recombinant EstD04-His(6x) protein exhibited esterase activity and broad substrate specificity, as it was capable of hydrolyzing p-nitrophenyl derivatives with different acyl chain lengths. By using the most favorable substrate p-nitrophenyl butyrate (C₄), we defined the optimal temperature and pH value for EstD04 esterase activity as 40 °C and pH 8, respectively, with a catalytic efficiency (k_cat/K_m) of 6.17 × 10³ mM^-1 s^-1 at 40 °C. EstD04 demonstrated high stability between pH 8 and 10, and thus, it might be capably used as an alkaline esterase in industrial applications. The addition of Mg²⁺ and NH₄⁺, as well as DMSO, could stimulate EstD04 enzyme activity. Based on bioinformatic motif analyses and tertiary structural simulation, we determined EstD04 to be a typical bHSL protein with highly conserved motifs, including a triad catalytic center (Ser¹⁶⁰, Glu²⁵³, and His²⁸³), two cap regions, hinge sites, and an oxyanion hole, which are important for the type IV enzyme activity. Moreover, the sequence analysis suggested that the two unique discrete cap regions of EstD04 may contribute to its alkali mesophilic nature, allowing EstD04 to exhibit extremely distinct physiological properties from its evolutionarily closest esterase.

The Mobility of the Cap Domain Is Essential for the Substrate Promiscuity of a Family IV Esterase from Sorghum Rhizosphere Microbiome

Metagenomics offers the possibility to screen for versatile biocatalysts. In this study, the microbial community of the Sorghum bicolor rhizosphere was spiked with technical cashew nut shell liquid, and after incubation, the environmental DNA (eDNA) was extracted and subsequently used to build a metagenomic library. We report the biochemical features and crystal structure of a novel esterase from the family IV, EH₀, retrieved from an uncultured sphingomonad after a functional screen in tributyrin agar plates. EH₀ (optimum temperature [T_opt], 50°C; melting temperature [T_m], 55.7°C; optimum pH [pH_opt], 9.5) was stable in the presence of 10 to 20% (vol/vol) organic solvents and exhibited hydrolytic activity against p-nitrophenyl esters from acetate to palmitate, preferably butyrate (496 U mg^-1), and a large battery of 69 structurally different esters (up to 30.2 U mg^-1), including bis(2-hydroxyethyl)-terephthalate (0.16 ± 0.06 U mg^-1). This broad substrate specificity contrasts with the fact that EH₀ showed a long and narrow catalytic tunnel, whose access appears to be hindered by a tight folding of its cap domain. We propose that this cap domain is a highly flexible structure whose opening is mediated by unique structural elements, one of which is the presence of two contiguous proline residues likely acting as possible hinges, which together allow for the entrance of the substrates. Therefore, this work provides a new role for the cap domain, which until now was thought to be an immobile element that contained hydrophobic patches involved in substrate prerecognition and in turn substrate specificity within family IV esterases. IMPORTANCE A better understanding of structure-function relationships of enzymes allows revelation of key structural motifs or elements. Here, we studied the structural basis of the substrate promiscuity of EH₀, a family IV esterase, isolated from a sample of the Sorghum bicolor rhizosphere microbiome exposed to technical cashew nut shell liquid. The analysis of EH₀ revealed the potential of the sorghum rhizosphere microbiome as a source of enzymes with interesting properties, such as pH and solvent tolerance and remarkably broad substrate promiscuity. Its structure resembled those of homologous proteins from mesophilic Parvibaculum and Erythrobacter spp. and hyperthermophilic Pyrobaculum and Sulfolobus spp. and had a very narrow, single-entry access tunnel to the active site, with access controlled by a capping domain that includes a number of nonconserved proline residues. These structural markers, distinct from those of other substrate-promiscuous esterases, can help in tuning substrate profiles beyond tunnel and active site engineering.

Immobilized GDEst-95, GDEst-lip and GD-95RM lipolytic enzymes for continuous flow hydrolysis and transesterification reactions

In this study lipolytic biocatalysts GD-95RM, GDEst-95 and GDEst-lip were immobilized by encapsulation in calcium alginate beads_. All three immobilized biocatalysts demonstrated significantly increased thermal stability at 60-70 °C temperatures and the activity of GD-95RM lipase increased by 50% at 70-80 °C following the immobilization. Moreover, encapsulated GDEst-95 esterase retained higher than 50% lipolytic activity after 3 months of incubation with butanol (25%) and ethanol (50%); GDEst-lip enzyme possessed 50% activity after 2 months of treatment with ethanol (25%) and methanol (25%); and GD-95RM lipase displayed higher that 50% activity after two-week incubation with methanol (50%). All three immobilized enzymes displayed long-term storage capability (>50% activity) at least until 3 months at 4 °C. It was also detected that immobilized GD-95RM and GDEst-lip can perform flow hydrolysis of both avocado oil and p-NP dodecanoate in prototype packed-bed column reactor. The analysis of continuous transesterification of avocado or sunflower oil with ethanol or methanol as substrates confirmed that encapsulated GD-95RM and GDEst-lip enzymes is a useful approach to produce fatty acid alkyl esters.

Counterbalance of Stability and Activity Observed for Thermostable Transaminase from Thermobaculum terrenum in the Presence of Organic Solvents

Pyridoxal-5’-phosphate-dependent transaminases catalyze stereoselective amination of organic compounds and are highly important for industrial applications. Catalysis by transaminases often requires organic solvents to increase the solubility of reactants. However, natural transaminases are prone to inactivation in the presence of water-miscible organic solvents. Here, we present the solvent tolerant thermostable transaminase from Thermobaculum terrenum (TaTT) that catalyzes transamination between L-leucine and alpha-ketoglutarate with an optimum at 75 °C and increases the activity ~1.8-fold upon addition of 15% dimethyl sulfoxide or 15% methanol at high but suboptimal temperature, 50 °C. The enhancement of the activity correlates with a decrease in the thermal denaturation midpoint temperature. The blue-shift of tryptophan fluorescence suggested that solvent molecules penetrate the hydration shell of the enzyme. Analysis of hydrogen bonds in the TaTT dimer revealed a high number of salt bridges and surface hydrogen bonds formed by backbone atoms. The latter are sensitive to the presence of organic solvents; they rearrange, conferring the relaxation of some constraints inherent to a thermostable enzyme at low temperatures. Our data support the idea that the counterbalance of stability and activity is crucial for the catalysis under given conditions; the obtained results may be useful for fine-tuning biocatalyst efficiency.

Study on effects of co-solvents on the structure of DhaA by molecular dynamics simulation

With the increasing application of enzymes in various research fields, the choices of co-solvents in enzymatic preparations which directly related to the catalytic activity have been attracted attention. Thus, researching on the stabilization or destabilization behaviors of enzymes in different solvents is extremely essential. In this study, the structural changes of DhaA in two typical aprotic co-solvents (acetonitrile and tetrahydrofuran) were firstly investigated by molecular dynamics (MD) simulation. The simulation results revealed the strong van der Waals force between co-solvents and DhaA which could induce the structural change of enzyme. Interestingly, the differences of molecular size and the electrostatic force with enzyme of two co-solvents led to quite different influences on DhaA. As for acetonitrile, solvent molecules could penetrate into the catalytic site of DhaA which promoted by the electrostatic interaction. On the contrary, tetrahydrofuran molecules were mainly distributed around the catalytic site due to the relative weak electrostatic interaction and steric resistance effect. It can be concluded that different co-solvent can affect the key domains, substrate pathway and catalytic pocket of DhaA.Communicated by Ramaswamy H. Sarma.