A new nano-composite potentiometric sensor containing an Hg2+-ion imprinted polymer for the trace determination of mercury ions in different matrices

Advancements in mercury detection using surface-enhanced Raman spectroscopy (SERS) and ion-imprinted polymers (IIPs): a review

Mercury (Hg) contamination remains a major environmental concern primarily due to its presence at trace levels, making monitoring the concentration of Hg challenging. Sensitivity and selectivity are significant challenges in the development of mercury sensors. Surface-enhanced Raman spectroscopy (SERS) and ion-imprinted polymers (IIPs) are two distinct analytical methods developed and employed for mercury detection. In this review, we provide an overview of the key aspects of SERS and IIP methodologies, focusing on the recent advances in sensitivity and selectivity for mercury detection. By examining the critical parameters and challenges commonly encountered in this area of research, as reported in the literature, we present a set of recommendations. These recommendations cover solid and colloidal SERS substrates, appropriate Raman reporter/probe molecules, and customization of IIPs for mercury sensing and removal. Furthermore, we provide a perspective on the potential integration of SERS with IIPs to achieve enhanced sensitivity and selectivity in mercury detection. Our aim is to foster the establishment of a SERS-IIP hybrid method as a robust analytical tool for mercury detection across diverse fields.

Novel Amperometric Mercury-Selective Sensor Based on Organic Chelator Ionophore

A novel amperometric sensor for the direct determination of toxic mercury ions, Hg²⁺, based on the organic chelator ionophore N, N di (2-hydroxy-5-[(4-nitrophenyl)diazenyl]benzaldehyde) benzene-1,2-diamine (NDBD), and multiwalled carbon nanotubes (MWCNT) immobilized on a glassy carbon electrode surface was developed. The parameters influencing sensor performance including the ionophore concentration, the applied potential, and electrolyte pH were optimized. The sensor response to Hg²⁺ was linear between 1-25 µM with a limit of detection of 60 nM. Interferences from other heavy metal ions were evaluated and the sensor showed excellent selectivity towards Hg²⁺. The method was successfully applied to the determination of mercury ions in milk and water samples.

A chemically modified solid-state sensor for magnesium(ii) ions and esomeprazole magnesium potentiometric assay

The use of electrochemical sensors offers a simple, affordable solution with great reliability. Magnesium is a mineral that the body requires to function properly. It encourages preserving a stable pulse, strong bones, and healthy blood pressure. Herein, a novel ion-selective electrode using esomeprazole magnesium trihydrate as an ion-association complex was developed for magnesium(ii) ion determination in mineral water, drug substances, and pharmaceutical formulations. The electrode response was optimized in terms of plasticizer type, ion exchanger concentration, and membrane composition. To find the best sensor combination, the initial optimization research was performed using eight different sensors. A membrane containing 20% esomeprazole magnesium trihydrate, 36% carbon, and 44% o-Nitrophenyl Octyl Ether (NPOE) as a plasticizer yielded the best potentiometric response. The developed sensor demonstrated a Nernstian response with a slope of 29.93 ± 0.1 mV per decade in the concentration range of 1.41 × 10^-5 mol L^-1 to 1 × 10^-2 mol L^-1. Within a pH range of 5-8, it had a low detection limit of 4.13 × 10^-6 mol L^-1. When compared to the official method, there are no statistically significant differences.

Nanomaterials-Based Ion-Imprinted Electrochemical Sensors for Heavy Metal Ions Detection: A Review

Heavy metal ions (HMIs) pose a serious threat to the environment and human body because they are toxic and non-biodegradable and widely exist in environmental ecosystems. It is necessary to develop a rapid, sensitive and convenient method for HMIs detection to provide a strong guarantee for ecology and human health. Ion-imprinted electrochemical sensors (IIECSs) based on nanomaterials have been regarded as an excellent technology because of the good selectivity, the advantages of fast detection speed, low cost, and portability. Electrode surfaces modified with nanomaterials can obtain excellent nano-effects, such as size effect, macroscopic quantum tunneling effect and surface effect, which greatly improve its surface area and conductivity, so as to improve the detection sensitivity and reduce the detection limit of the sensor. Hence, the present review focused on the fundamentals and the synthetic strategies of ion-imprinted polymers (IIPs) and IIECSs for HMIs detection, as well as the applications of various nanomaterials as modifiers and sensitizers in the construction of HMIIECSs and the influence on the sensing performance of the fabricated sensors. Finally, the potential challenges and outlook on the future development of the HMIIECSs technology were also highlighted. By means of the points presented in this review, we hope to provide some help in further developing the preparation methods of high-performance HMIIECSs and expanding their potential applications.

An advantageous application of molecularly imprinted polymers in food processing and quality control

In the global market era, food product control is very challenging. It is impossible to track and control all production and delivery chains not only for regular customers but also for the State Sanitary Inspections. Certified laboratories currently use accurate food safety and quality inspection methods. However, these methods are very laborious and costly. The present review highlights the need to develop fast, robust, and cost-effective analytical assays to determine food contamination. Application of the molecularly imprinted polymers (MIPs) as selective recognition units for chemosensors' fabrication was herein explored. MIPs enable fast and inexpensive electrochemical and optical transduction, significantly improving detectability, sensitivity, and selectivity. MIPs compromise durability of synthetic materials with a high affinity to target analytes and selectivity of molecular recognition. Imprinted molecular cavities, present in MIPs structure, are complementary to the target analyte molecules in terms of size, shape, and location of recognizing sites. They perfectly mimic natural molecular recognition. The present review article critically covers MIPs' applications in selective assays for a wide range of food products. Moreover, numerous potential applications of MIPs in the food industry, including sample pretreatment before analysis, removal of contaminants, or extraction of high-value ingredients, are discussed.

A Critical Review on the Use of Molecular Imprinting for Trace Heavy Metal and Micropollutant Detection

Molecular recognition has been described as the “ultimate” form of sensing and plays a fundamental role in biological processes. There is a move towards biomimetic recognition elements to overcome inherent problems of natural receptors such as limited stability, high-cost, and variation in response. In recent years, several alternatives have emerged which have found their first commercial applications. In this review, we focus on molecularly imprinted polymers (MIPs) since they present an attractive alternative due to recent breakthroughs in polymer science and nanotechnology. For example, innovative solid-phase synthesis methods can produce MIPs with sometimes greater affinities than natural receptors. Although industry and environmental agencies require sensors for continuous monitoring, the regulatory barrier for employing MIP-based sensors is still low for environmental applications. Despite this, there are currently no sensors in this area, which is likely due to low profitability and the need for new legislation to promote the development of MIP-based sensors for pollutant and heavy metal monitoring. The increased demand for point-of-use devices and home testing kits is driving an exponential growth in biosensor production, leading to an expected market value of over GPB 25 billion by 2023. A key requirement of point-of-use devices is portability, since the test must be conducted at “the time and place” to pinpoint sources of contamination in food and/or water samples. Therefore, this review will focus on MIP-based sensors for monitoring pollutants and heavy metals by critically evaluating relevant literature sources from 1993 to 2022.

Potential sensing of toxic chemical warfare agents (CWAs) by twisted nanographenes: A first principle approach

The toxic chemical warfare agents (CWAs) are extremely harmful to the living organisms. Their efficient detection and removal in a limited time span are essential for the human health and environmental security. Twisted nanographenes have great applications in the fields of energy storage and optoelectronics, but their use as sensors is rarely described. Therefore, we have explored the sensitivity and selectivity of twisted nanographene analogues (C₃₂H₁₆, C₆₄H₃₂) towards selected toxic CWAs, including phosgene, thiophosgene and formaldehyde. The interaction between CWAs and twisted nanographenes is mainly interpreted by considering the optimized geometries, adsorption energies, natural bond orbital (NBO), frontier molecular orbital (FMO), non-covalent interaction (NCI) and quantum theory of atoms in molecules (QTAIM) analyses. The structural geometries show that the central octagon of twisted nanographenes is the most favorable site of interaction. The interaction energies reveal the physisorption of selected CWAs on tNGs surface. The average energy gap change (%E_H-L^a) and % sensitivity are quantitatively determined to evaluate the sensing capability of the twisted nanographenes. Among the selected CWAs molecules, the sensitivity of tNG analogues (C₃₂H₁₆ and C₆₄H₃₂) is superior towards thiophosgene (ThP), which is revealed by the high interaction energies of -8.19 and - 12.17 kcal/mol, respectively. This theoretical study will help experimentalists to devise novel sensors based on twisted nanographenes for the detection of toxic CWAs which may also work efficiently under the humid conditions.

Detection and remediation of mercury contaminated environment by nanotechnology: Progress and challenges

Hg pollution is a global concern due to its high ecotoxicity and health risk to human beings. A comprehensive understanding of the fast-developed technology applied in determining and controlling Hg pollution is beneficial for risk assessment and field remediation. Herein, we mainly assembled the recent progress on Hg treatment in the environment by nanotechnology. The advantages and disadvantages of the conventional and nanotechnology-based methods commonly used in water-/soil-Hg remediation were compared and summarized. Specifically, green nanomaterials derived from plant tissues (e.g., nanocellulose) have prominent merits in remediation of Hg contaminated environments, including high efficiency in Hg removal, low cost, environment-friendly, and easily degradable. Based on the theories of Hg biogeochemistry and existed researches, four promising pathways are proposed, 1) developing surface-modified green nanocellulose with high selectivity and affinity towards Hg; 2) designing effective dispersants in preventing nanocellulose from agglomeration in soil; 3) mediating soil properties by adding green nanomaterials-based fertilizers; 4) improving plant-Hg-extract capacity with green nanomaterials addition. Briefly, more efficient and available approaches are still expected to be developed and implemented in the natural environment for Hg remediation.

Stable Pb(II) ion-selective electrodes with a low detection limit using silver nanoparticles/polyaniline as the solid contact

Solid contact-based ion-selective electrodes (SC-ISEs) based on silver nanoparticles/polyaniline (Ag@PANI) as the solid contact (SC) were successfully prepared. The Ag@PANI SC showed high capacitance and excellent electron transport performance. Owing to the synergetic effects of the Ag nanoparticles and PANI, a GC/Ag@PANI-II/Pb²⁺-ISE (where II refers to a Ag content of 0.01 wt% in the SC layer) showed a low Pb²⁺ detection limit (6.31 × 10^-10 M) with a slope of 29.1 ± 0.3 mV/dec, a fast response (< 5 s), and high stability. GC/Ag@PANI-II/Pb²⁺-ISE exhibited a Nernstian response for Pb²⁺ ions over a wide concentration range (10^-3 to 10^-9 M). After a 3-week operation, GC/Ag@PANI-II/Pb²⁺-ISE responded linearly to Pb²⁺ over the range of 10^-7-10^-3 M, demonstrating good long-term potential stability. Furthermore, the electrode showed excellent reproducibility and repeatability of the potential values and was successfully applied to detect the Pb²⁺ concentration in real samples with a recovery of 97 - 109%. Results suggest that Ag@PANI composites offer good transducer performance in trace ion detection sensors.

A Novel Reduced Graphene Oxide Modified Carbon Paste Electrode for Potentiometric Determination of Trihexyphenidyl Hydrochloride in Pharmaceutical and Biological Matrices

A novel promising carbon paste electrode with excellent potentiometric properties was prepared for the analysis of trihexyphenidyl hydrochloride (THP), the acetylcholine receptor and an anticholinergic drug in real samples. It contains 10.2% trihexyphenidy-tetraphenylborate ionic pair as the electroactive material, with the addition of 3.9% reduced graphene oxide and 0.3% of anionic additive into the paste, which consists of 45.0% dibutylphthalate as the solvent mediator and 40.6% graphite. Under the optimized experimental conditions, the electrode showed a Nernstian slope of 58.9 ± 0.2 mV/decade with a regression coefficient of 0.9992. It exhibited high selectivity and reproducibility as well as a fast and linear dynamic response range from 4.0 × 10⁻⁷ to 1.0 × 10⁻² M. The electrode remained usable for up to 19 days. Analytical applications showed excellent recoveries ranging from 96.8 to 101.7%, LOD was 2.5 × 10⁻⁷ M. The electrode was successfully used for THP analysis of pharmaceutical and biological samples.

Electrochemically triggered sensing and recovery of mercury over sodium alginate grafted polyaniline

An efficient potential triggering process has been established over chemically functionalized SA-g-PANI under optimum conditions to enable the sensing and extraction of residual mercury ions present in wastewater and soil samples.

Mercury speciation in edible seaweed by liquid chromatography - Inductively coupled plasma mass spectrometry after ionic imprinted polymer-solid phase extraction

In contrast to most of essential and heavy metals, mercury levels in seaweed are very low, and pre-concentration methods are required for an adequate total mercury determination and mercury speciation in this foodstuff. An ionic imprinted polymer-based solid phase extraction (on column) pre-concentration procedure has been optimized for mercury species enrichment before liquid chromatography hyphenated with inductively coupled plasma mass spectrometry determination. The polymer has been synthesized by the precipitation polymerization method and using a ternary pre-polymerization mixture containing the template (methylmercury), a non-vinylated monomer (phenobarbital), and a vinylated monomer (methacrylic acid). Factors affecting the adsorption/desorption of Hg species (extract pH, loading and elution flow rates, volume of eluent, etc.), and parameters such as breakthrough volume and reusability, were fully studied. Mercury species were first isolated from seaweed by ultrasound assisted extraction using a 0.1% (v/v) HCl, 0.12% (w/v) l-cysteine, 0.1% (v/v) mercaptoethanol solution. Under optimized conditions, the limits of detection were 0.007 and 0.02 μg kg^-1 dw for methylmercury and Hg(II), respectively. The pre-concentration factor (volume of 10 mL of seaweed extract) was 50. Repeatability and reproducibility of the method were satisfactory with relative standard deviations lower than 16%. The proposed methodology was finally applied for the selective pre-concentration and determination of methylmercury and Hg (II) in a BCR-463 certified reference material and in several edible seaweeds.

High Performance Zinc Oxide Nanorod-Doped Ion Imprinted Polypyrrole for the Selective Electrosensing of Mercury II Ions

A biomimetic, ion-imprinted polymer (IIP) was prepared by electropolymerization of pyrrole at the surface of gold electrodes decorated with vertically grown ZnO nanorods. The vertical growth of the nanorods was achieved via an ultrathin aryl monolayer grafted by reduction of diazonium salt precursor. Pyrrole was polymerized in the presence of L-cysteine as chelating agent and Hg2+ (template). Hg2+-imprinted polypyrrole (PPy) was also prepared on a bare gold electrode in order to compare the two methods of sensor design (Au-ZnO-IIP vs. Au-IIP). Non-imprinted PPy was prepared in the same conditions but in the absence of any Hg2+ template. The strategy combining diazonium salt modification and ZnO nanorod decoration of gold electrodes permitted us to increase considerably the specific surface area and thus improve the sensor performance. The limit of detection (LOD) of the designed sensor was ~1 pM, the lowest value ever reported in the literature for gold electrode sensors. The dissociation constants between PPy and Hg2+ were estimated at [Kd1 = (7.89 ± 3.63) mM and Kd2 = (38.10 ± 9.22) pM]. The sensitivity of the designed sensor was found to be 0.692 ± 0.034 μA.pM-1. The Au-ZnO-IIP was found to be highly selective towards Hg2+ compared to cadmium, lead and copper ions. This sensor design strategy could open up new horizons in monitoring toxic heavy metal ions in water and therefore contribute to enhancing environmental quality.

The Use of Aptamers and Molecularly Imprinted Polymers in Biosensors for Environmental Monitoring: A Tale of Two Receptors

Effective molecular recognition remains a major challenge in the development of robust receptors for biosensing applications. Over the last three decades, aptamers and molecularly imprinted polymers (MIPs) have emerged as the receptors of choice for use in biosensors as viable alternatives to natural antibodies, due to their superior stability, comparable binding performance, and lower costs. Although both of these technologies have been developed in parallel, they both suffer from their own unique problems. In this review, we will compare and contrast both types of receptor, with a focus on the area of environmental monitoring. Firstly, we will discuss the strategies and challenges involved in their development. We will also discuss the challenges that are involved in interfacing them with the biosensors. We will then compare and contrast their performance with a focus on their use in the detection of environmental contaminants, namely, antibiotics, pesticides, heavy metals, and pathogens detection. Finally, we will discuss the future direction of these two technologies.

Colorimetric and naked eye detection of trace Hg2+ ions in the environmental water samples based on plasmonic response of sodium alginate impregnated by silver nanoparticles

Water pollution with mercury is a global concern. Therefore, establishing a rapid and accurate detection method is urgently required. Nanosensors can be a perfect alternative to instrument detection. In order to overcome low sustainability of sensors, a new composite nanosensor of sodium alginate- silver nanoparticles (SA-AgNPs) was synthesized by solvent casting method and used in colorimetric and naked eye detection of trace Hg²⁺ ions in water samples. The structural features of the produced nanosensor were characterized by instrumental techniques. The obtained results confirmed the formation of AgNPs with an average size of 13.34 nm. The colorimetric sensing of Hg²⁺ was carried out under specific conditions (pH = 6 and reaction time of 7 min) with a linear correlation obtained between the absorbance at 402 nm and different Hg²⁺ ion concentrations within the range of 0.025 μM-60 μM. The synthesized composite nanosensor of SA-AgNPs detected Hg²⁺ ions with a detection limit (LOD) of 5.29 nM. In addition, this sensor was successfully applied to detect Hg²⁺ ions in the environmental water samples with recoveries within the range of 81.58% to 114.73%. The produced nanosensor exhibited good selectivity toward Hg²⁺ ions in the presence of several competing ions.

An electrochemical sensor for attomolar determination of mercury(II) using DNA/poly-L-methionine-gold nanoparticles/pencil graphite electrode

The present work describes an ultrasensitive electrochemical sensor for determination of mercury(II) using deoxyribonucleic acid/poly-L-methionine-gold nanoparticles/pencil graphite electrode (DNA/PMET-AuNPs/PGE). To fabricate this biosensor, L-methionine (L-MET) was electropolymerized on the PGE surface followed by simultaneous electrochemical entrapment of AuNPs. Next, DNA was immobilized on the PMET-AuNPs/PGE by applying a 0.5 V potential. The surface area of modified and unmodified electrodes was determined by chronocoulometric technique. Hg²⁺ was detected in the linear dynamic range of 0.1 aM to 0.1 nM, and the detection limit was determined as 0.004 aM using square wave anodic stripping voltammetry (SWASV) under optimized conditions. The DNA/PMET-AuNPs/PGE demonstrated good selectivity toward Hg²⁺ against other metal ions such as V⁴⁺, Pb²⁺, Cr³⁺, Cd²⁺, Cu²⁺, Zn²⁺, Sn²⁺, In³⁺, Ge⁴⁺, and Fe³⁺. Real samples studies were carried out in sea water and fish samples.

Solid Contact Potentiometric Sensors Based on a New Class of Ionic Liquids on Thiacalixarene Platform

New solid-contact potentiometric sensors have been developed for hydrogen phosphate recognition on the basis of ionic liquids containing tetrasubstituted derivatives of thiacalix[4]arene in cone and 1,3-alternate conformations with trimethyl- and triethylammonium fragments at the lower rim substituents. The recognition of selected anions including carbonate, hydrogen phosphate, perchlorate, oxalate, picrate, and EDTA was conducted using electrochemical impedance spectroscopy with ferricyanide redox probe. For the potentiometric sensor assembling, the ionic liquids were stabilized by multiwalled carbon nanotubes and carbon black deposited on the glassy carbon electrode. The influence of support, steric factors and modification conditions on the sensor performance has been investigated. As was shown, potentiometric sensors developed make it possible to selectively determine hydrogen phosphate anion within the concentration range from 1 × 10⁻² to 1 × 10⁻⁶ M and limit of detection of 2 × 10⁻⁷−1 × 10⁻⁶ M with unbiased selectivity coefficients varied from 1.2 × 10⁻¹ to 1.0 × 10⁻⁸ (carbonate, acetate, oxalate, succinate, glutharate, glycolate, and malonate anions).

Analysis of mercury adsorption at the gibbsite-water interface using the CD-MUSIC model

Mercury (Hg), one of the most toxic substances in nature, has long been released during the anthropogenic activity. A correct description of the adsorptive behavior of mercury is important to gain a better insight into its fate and transport in natural mineral surfaces, which will be a prerequisite for the development of surface complexation model for the adsorption processes. In the present study, simulation experiments on macroscopic Hg(II) sorption by gibbsite (α-Al(OH)₃), a representative aluminum (hydr)oxide mineral, were performed using the charge distribution and multi-site complexation (CD-MUSIC) approach with 1-pK triple plane model (TPM). For this purpose, several data sets which had already been reported in the literature were employed to analyze the effect of pH, ionic strength, and co-exisiting ions (NO₃^- and Cl^-) on the Hg(II) adsorption onto gibbsite. Sequential optimization approach was used to determine the acidity and asymmetric binding constants for electrolyte ions and the affinity constants of the surface species through the model simulation using FITEQLC (a modified code of FITEQL 4.0). The model successfully incorporated the presence of inorganic ligands at the dominant edge (100) face of gibbsite with consistent surface species, which was evidenced by molecular scale analysis. The model was verified with an independent set of Hg(II) adsorption data incorporating carbonate binding species in an open gibbsite-water system.

Recent Studies on the Speciation and Determination of Mercury in Different Environmental Matrices Using Various Analytical Techniques

This paper reviews the current research on the speciation and determination of mercury by various analytical techniques, including the atomic absorption spectrometry (AAS), voltammetry, inductively coupled plasma optical emission spectrometry (ICP-OES), ICP-mass spectrometry (MS), atomic fluorescence spectrometry (AFS), spectrophotometry, spectrofluorometry, and high performance liquid chromatography (HPLC). Approximately 96 research papers on the speciation and determination of mercury by various analytical instruments published in international journals since 2015 were reviewed. All analytical parameters, including the limits of detection, linearity range, quality assurance and control, applicability, and interfering ions, evaluated in the reviewed articles were tabulated. In this review, we found a lack of information in speciation studies of mercury in recent years. Another important conclusion from this review was that there were few studies regarding the concentration of mercury in the atmosphere.

Introduction of selectivity and specificity to graphene using an inimitable combination of molecular imprinting and nanotechnology

Recently, the nanostructured modified molecularly imprinting polymer has created a great attention in research field due to its excellent properties such as high surface to volume ratio, low cost, and easy preparation/handling. Among the nanostructured materials, the carbonaceous material such as 'graphene' has attracted the tremendous attention of researchers owing to their fascinating electrical, thermal and physical properties. In this review article, we have tried to explore as well as compile the role of graphene-based nanomaterials in the fabrication of imprinted polymers. In other words, herein the recent efforts made to introduce selectivity in graphene-based nanomaterials were tried collected together. The major concern of this review article is focused on the sensing devices fabricated via a combination of graphene, graphene@nanoparticles, graphene@carbon nanotubes and molecularly imprinted polymers. Additionally, the combination of graphene and quantum dots was also included to explore the fluorescence properties of zero-band-gap graphene.