Solubilization of polycyclic aromatic hydrocarbons in structurally different gemini and monomeric surfactants: A comparative study

Effect of in situ mixed micellization of ester-functionalized gemini surfactant at different pHs on solubilization and cosolubilization of various polycyclic aromatic hydrocarbons of varying hydrophobicities

A pH controlled cleavability unfolds the 3-in-1 surfactant feature of an ester-bonded gemini surfactant, 2, 2'-[(oxybis (ethane-1,2-diyl))bis (oxy)]bis (N-hexadecyl-N,Ndimethyl-2-oxoethanaminium) dichloride (C16-C4O2-C16), by reinforcing in-situ mixed micellization between cleaved components at non-neutral pH (pH 3,12). The triplicity is assigned to two mixed-micelle variants at pH 3 and pH 12 besides the unhydrolyzed C16-C4O2-C16 at pH 7. The pH-controlled aggregation of such trichotomic surfactant dramatically enhances the micellar solubilization/cosolubilization of PAHs viz. naphthalene (Np), phenanthrene (Ph), pyrene (Py), perylene (Pe). The cosolubilization of binary/ternary PAH mixtures in such remarkable micellar assemblies at pH 3, 7 and 12 yields intriguing synergistic or antagonistic solubility outcomes correlated to PAH-PAH and PAH-micelle interactions. This study provides valuable insights into the potential applications of the ester-bonded gemini surfactant for the cosolubilization of undesirable hydrophobic compounds at natural sites having variable pH.

Synthesis and Surface Properties of Photoresponsive Gemini Surfactants: Implication for Remediating PAHs-Contaminated Groundwater

The efficient utility of surfactants remains a daunting task for groundwater remediation. In this study, we have synthesized a conventional photoresponsive surfactant 4-[4-[(4-butylphenyl)azo]phenoxy]butyldimethylethylammonium bromide (AzoPB) and a gemini photoresponsive surfactant N¹,N²-bis[4-[4-[(4-butylphenyl)azo]phenoxy]butyl]-N¹,N²-tetramethylethane-1,2-diammonium bromide (AzoPBT) for solubilizing PAHs in groundwater. The two surfactants' photosensitivity, surface properties, and solubilization/release ability for phenanthrene (Phe) and acenaphthylene (Ace) were studied in detail. Under UV-light irradiation for 15-20 s, the two surfactants can be converted from trans to cis, while cis-to-trans isomerization can be achieved under visible-light irradiation for 1 min. Compared to AzoPB, AzoPBT exhibited strong surface properties such as lower critical micelle concentration (0.52 mM), surface tension (γ, 28.94 mN·m^-1), minimum area (A_min, 1.72 × 10^-8 nm²), and higher maximum adsorption (Γ_max, 96.55 mol·m^-2). The solubility of Phe and Ace in the AzoPBT aqueous solution (12.84 and 14.27 mg/L) was much higher than that in the AzoPB aqueous solution (7.51 and 8.77 mg/L) and gradually increased as the surfactant concentration increased in both aqueous solutions. Compared to AzoPB, gemini surfactant AzoPBT exhibited stronger solubilization ability. After four cycles of cis-trans isomerization conversion, AzoPBT could still reduce the hydrophobicity of Phe in natural groundwater, although the solubility of Phe decreased slightly. Additionally, the release capacity of AzoPBT was significantly higher than that of AzoPB during the cyclic solubilization-release process. The results indicated that gemini photoresponsive surfactants should be preferable to conventional photoresponsive surfactants for groundwater remediation due to their higher solubilization and release efficiency for Phe in the cyclic solubilization and release process, which can improve repair efficiency, minimize secondary pollution, and reduce remediation costs.

Desorption process and morphological analysis of real polycyclic aromatic hydrocarbons contaminated soil by the heterogemini surfactant and its mixed systems

Surfactant-enhanced remediation (SER) is an efficient and low-cost technology for polycyclic aromatic hydrocarbons (PAHs) contaminated sites. This study assessed the desorption processes and effects of Heterogemini surfactant (Dodecyldimethylammonium bromide/tetradecyldimethylammonium bromide, DBTB), two traditional surfactants (Hexadecyl trimethyl ammonium bromide, CTAB; Sorbitan monolaurate, Span 20) and their mixed systems on the real PAHs-contaminated soil from an abandoned coking plant, as well they were analyzed micro morphologically. DBTB had greater desorption capability for PAHs and favorable interaction with the traditional surfactants confirmed by reaction parameters β^m and Gibbs. Whether for total PAHs (TPAHs) or different molecular weight PAHs, the mixed system Span 20/DBTB had larger molar solubilization ratio (MSR) and partition coefficient (K_m) than CTAB/DBTB, the highest desorption rate for TPAHs reaching 68.83%. Additionally, microscopic morphology showed micelles of Span 20/DBTB were more dispersed and formed strings easily, explaining its good desorption capability. What resulted demonstrated the feasibility of DBTB, a novel Heterogemini surfactant, and its mixed systems remediating PAHs-contaminated soil of abandoned industrial site.

Micellization Behavior of Conventional Cationic Surfactants within Glycerol-Based Deep Eutectic Solvent

The aggregation behavior of two cationic surfactants, i.e., cetyldimethylethanolammonium bromide (CDMEAB) and cetyltributylphosphonium bromide (CTBPB), within an aqueous deep eutectic solvent (DES) is studied. The synthesized DES is composed of 1:2 mole ratio of choline chloride and glycerol and is further characterized by Fourier transform infrared (FTIR) and 1H NMR spectroscopy techniques. The critical micellar concentration (CMC), micellar size, and intermolecular interaction in surfactants within Gly-based DES solutions are investigated by various techniques including surface tension, conductivity, fluorescence, dynamic light scattering (DLS), FTIR, 1H NMR, and two-dimensional (2D) nuclear Overhauser effect spectroscopy (NOESY). The various interfacial properties and thermodynamic parameters are determined in the presence of 5 wt % glyceline (Gly)-based DES in an aqueous solution. The CMC, aggregation number (N agg), and Stern-Volmer constant (K sv) have also been determined by a steady-state fluorescence method. DLS is used to obtain information regarding the size of the aggregates formed by the cationic surfactants in DES solutions. FTIR spectroscopy is used to study the surfactant-DES interactions that tune the micellar structure of the surfactants within the Gly-based DES solution. The functional groups involved in the interactions (H-bonding and electrostatic) are the head groups (HO-CH2-CH2-N+ ion for CDMEAB and quaternary phosphonium (P+) ion for CTBPB) of the surfactants with the -OH-containing Gly DES. The hydrophobic moieties are involved in the hydrophobic interactions. The 1H NMR data show that differences in chemical shifts can provide significant information about the interactions taking place within the system. 1H NMR and NOESY techniques are further employed to strengthen our claim on the feasible structural arrangements within the aqueous surfactant-DES self-assembled structures. It is observed that both the cationic surfactants, i.e., CDMEAB and CTBPB, form self-assembled nanostructures in the Gly-based DES solutions. The present results are expected to be useful for colloidal solutions of DES and their mixtures with water.

Co-solubilization of polycyclic aromatic hydrocarbon mixtures in aqueous micellar systems and its correlation with FRET for enhanced remediation processes

Surfactant enhanced remediation (SER) is an effective approach for decontaminating the PAH polluted soils. Solubilization and Cosolubilization of Phenanthrene (Ph), Pyrene (Py) and Perylene (Pe) as single, binary and ternary mixtures have been studied employing cationic (CTAB), anionic (SDS), non-ionic surfactant (Brij 30) and block copolymer (P123) micelles. In the single solute solubilization studies, solubility of Pe follows the order Brij 30 > CTAB > SDS whereas Ph or Py followed the order of CTAB > Brij 30 > SDS. In the cosolubilization studies, an increase, decrease or no change in the mutual solubility of PAHs was observed. Synergism in solubilization was observed most in P123 in both binary and ternary PAH mixture where more PAHs could get solubilized in the dense micellar shell region, thereby enhancing the micellar core volume leading to enhanced solubilization of PAHs. The solubilizates as pairs (Ph-Pe and Py-Pe) were further tested for any possible energy transfer in presence of surfactant based restricted host environments using spectrofluorometry and spectrophotometry. Based on the solubilization and cosolubilization an efficient non-radiative energy transfer (FRET) was observed between Ph/Py (donor) and Pe (acceptor) in the non-ionic surfactant system as well as in CTAB-Brij 58 mixed system. The results of this work may improve the effective utilization of surfactants in their correct evaluation for the removal of PAHs from contaminated soils or aquifers treated with SER technology.

Solubility Enhancement of Polycyclic Aromatic Hydrocarbons by an Eco-Friendly Ester-Linked Gemini Surfactant and its Mixtures with Conventional Surfactants

The present study deals with the solubility enhancement of the two polycyclic aromatic hydrocarbons (PAHs) anthracene and pyrene in the aqueous micellar system of the cationic ester-containing cleavable gemini surfactant ethane-1,2-diyl-bis(N,N-dimethyl-N-tetradecylammoniumacetoxy) dichloride (14-E2-14 = C14H29(CH3)2N+(CH2COOCH2)2N+(CH3)2C14H29 · 2Cl−)), and its equimolar binary mixtures with some typical conventional cationic, anionic and non-ionic surfactants. The surface tension and conductivity measurements were used to evaluate the physicochemical parameters such as the critical micelle concentration (CMC), the interaction parameter (βm) and Gibbs excess free energy of micellization (ΔGexm) of the systems. The extent of solubilization of the micellar systems towards PAHs has been quantified in terms of molar solublization ratio (MSR), micellar/water partition coefficient (ln Km) and the standard Gibbs free energy of solubilization (ΔGs0). Above the CMC, all studied single as well as binary gemini-conventional surfactant systems show an increase in solubilization of the PAHs. For pure systems, the MSR value of Brij 58 was found to be significantly higher than that of the other amphiphiles. Amongst the mixed surfactant systems, the solubility enhancement of anthracene is found to be maximum in the 14-E2-14 + SDS/SDBS system whereas the system14-E2-14 + Brij 58 shows a higher solubility for pyrene.

Surfactant-enhanced remediation of polycyclic aromatic hydrocarbons: A review

Polycyclic aromatic hydrocarbons (PAHs) are toxic, mutagenic and carcinogenic organic compounds that are widely present in the environment. The bioremediation of PAHs is an economical and environmentally friendly remediation technique, but it is limited because PAHs have low water solubility and fewer bioavailable properties. The solubility and bioavailability of PAHs can be increased by using surfactants to reduce surface tension and interfacial tension; this method is called surfactant-enhanced remediation (SER). The SER of PAHs is influenced by many factors such as the type and concentration of surfactants, PAH hydrophobicity, temperature, pH, salinity, dissolved organic matter and microbial community. Furthermore, as mixed micelles have a synergistic effect on PAH solubilisation, selecting the optimum ratio of mixed surfactants leads to effective PAH remediation. Although the use of surfactants inhibits microbial activities in some cases, this could be avoided by choosing an optimum combination of surfactants and a proper microbial community for the targeted PAH(s), resulting in up to 99.99% PAH removal. This article reviews the literature on SER of PAHs, including surfactant types, the synergistic effect of mixed micelles on PAH removal, the impact of surfactants on the PAH biodegradation process, factors affecting the SER process, and the mechanisms of surfactant-enhanced solubilisation of PAHs.

Drivers and applications of integrated clean-up technologies for surfactant-enhanced remediation of environments contaminated with polycyclic aromatic hydrocarbons (PAHs)

Surfactant-enhanced remediation (SER) is considered as a promising and efficient remediation approach. This review summarizes and discusses main drivers on the application of SER in removing polycyclic aromatic hydrocarbons (PAHs) from contaminated soil and water. The effect of PAH-PAH interactions on SER efficiency is, for the first time, illustrated in an SER review. Interactions between mixed PAHs could enhance, decrease, or have no impact on surfactants' solubilization power towards PAHs, thus affecting the optimal usage of surfactants for SER. Although SER can transfer PAHs from soil/non-aqueous phase liquids to the aqueous phase, the harmful impact of PAHs still exists. To decrease the level of PAHs in SER solutions, a series of SER-based integrated cleanup technologies have been developed including surfactant-enhanced bioremediation (SEBR), surfactant-enhanced phytoremediation (SEPR) and SER-advanced oxidation processes (SER-AOPs). In this review, the general considerations and corresponding applications of the integrated cleanup technologies are summarized and discussed. Compared with SER-AOPs, SEBR and SEPR need less operation cost, yet require more treatment time. To successfully achieve the field application of surfactant-based technologies, massive production of the cost-effective green surfactants (i.e. biosurfactants) and comprehensive evaluation of the drivers and the global cost of SER-based cleanup technologies need to be performed in the future.