Application of new isonicotinamides as a corrosion inhibitor on mild steel in acidic medium: Electrochemical, SEM, EDX, AFM and DFT investigations

Novel synthesized triazole derivatives as effective corrosion inhibitors for carbon steel in 1M HCl solution: experimental and computational studies

This article outlines the synthesis of two derivatives of 4-amino-5-hydrazineyl-4H-1,2,4-triazole-3-thiol for the prevention of carbon steel corrosion in 1M HCl solution. These derivatives are (Z)-3-(1-(2-(4-amino-5-mercapto-4H-1,2,4-triazol-3-yl)hydrazono)ethyl)-2H-chromen-2-one (TZ1) and 5-(2-(9H-fluoren-9-ylidene)hydrazineyl)-4-amino-4H-1,2,4-triazole-3-thiol (TZ2). Weight loss, electrochemical experiments, surface examinations, and theoretical computation are used to evaluate the effectiveness of the two compounds to be used as corrosion inhibitors. Weight loss and electrochemical studies demonstrate that these derivatives reduce the corrosion rate of carbon steel. To examine the morphology and constitution of the carbon steel surface submerged in HCl solution as well as after adding inhibitors, surface examination tests are performed. Analysis of the test solution via UV-visible spectroscopy is employed to check the possibility of complex formation between inhibitor molecules and Fe2+ ions released during the corrosion process. In order to explore their biological activity, the antibacterial activity was investigated against (E. coli and Bacillus subtilis). Finally, theoretical confirmation of the experimental findings is provided by quantum chemical (DFT) and Monte Carlo (MC) simulation studies. More adsorption sites are present in the derivatives of 4-amino-5-hydrazineyl-4H-1,2,4-triazole-3-thiol, which offer a novel perspective for developing new classes of corrosion inhibitors with substantial protective efficacy, especially at high temperatures.

Experimental and computational chemical studies on the corrosion inhibition of new pyrimidinone derivatives for copper in nitric acid

Inhibition of copper corrosion by some pyrimidinone derivatives, namely; (E)-N-(3-((1,3-dimethyl-2,4,6-trioxohexahydropyrimidin-5-yl)diazenyl)-2,5-diethoxyphenyl)benzamide (MA-975) and(E)-6-(4-((4-chlorophenyl)diazenyl)-3-methyl-5-oxo-4,5-dihydro-1H-pyrazol-1-yl)-1,3 dimethylpyrimidine-2,4(1H,3H)-dione (MA-978C) in 1.0 M nitric acid (HNO₃) was studied using weight loss (WL), electrochemical impedance spectroscopy (EIS), and potentiodynamic polarization (PP) measurements. The efficiency of inhibition increases as the concentration of inhibitor increases, and it also increases as the temperature increases. With the addition of the examined inhibitors, significant corrosion protection was obtained, and (MA-975) showed a very promising % IE (89.59%) at 21 × 10⁻⁶ M using the (WL) method. The polarization data revealed that these compounds act as mixed-type compounds and are adsorbed on the copper surface following Langmuir adsorption isotherm forming a protective thin film protecting the metal in the corrosive media. Scanning electron microscopy (SEM) and Energy Dispersive X-ray were used to examine the surface morphology of copper samples. Quantum calculations and Monte Carlo simulation techniques were applied with informative yields and the results matched the experimental findings.

Novel pyrimidine-bichalcophene derivatives as corrosion inhibitors for copper in 1 M nitric acid solution

This study targets the investigation of three pyrimidine-bichalcophene derivatives (MA-1230, MA-1231, MA-1232) for the prevention of corrosion on copper in 1 M HNO₃ via weight loss (WL), potentiodynamic polarization (PDP), and electrochemical impedance spectroscopy (EIS) techniques. The surface morphology was also analyzed by different methods. It was found that the inhibition efficiency (% η) increased by increasing the doses of pyrimidine derivatives and the temperature of the medium. Weight loss data revealed the better adsorption of MA-1232 on the Cu surface at increased inhibitor dose, reaching a maximum efficiency of 99.14% at a dose of 21 μM at 45 °C. The best description of the adsorption of the investigated derivatives on the copper surface was given by the Langmuir isotherm. Some important thermodynamic parameters for the studied inhibitors were computed and are discussed herein. The polarization studies showed that the pyrimidine-bichalcophenes act as mixed inhibitors. Computational chemical approaches were used with informative yields, including quantum-chemical and molecular dynamics simulation techniques, which agree with the experimental results. The results obtained from all tested methods are strongly accepted.

Potential of dibenzo-18-crown-6-ether derivatives as a corrosion inhibitor on mild steel in HCl medium: electrochemical and computational approaches

The corrosion inhibition behaviour of the macrocyclic dibenzo-18-crown-6 derivatives BOH and OHB was investigated experimentally and theoretically on mild steel in a 15% hydrochloric acid medium.

Synthesis, Characterization, and Computational Chemical Study of Aliphatic Tricationic Surfactants as Corrosion Inhibitors for Metallic Equipment in Oil Fields

Aliphatic tricationic surfactants were prepared by the esterification reaction, followed by a quaternization reaction to protect oil well facilities from corrosion problems. Microelemental analysis and Fourier transform infrared and ¹H NMR spectroscopic techniques were performed to explore the obtained motifs. The performance of these amphiphiles as inhibitors for metallic S90 steel corrosion in formation water was investigated through electrochemical tests (potentiodynamic polarization and electrochemical impedance spectroscopy). The results revealed significant inhibition effectiveness improvement with increasing concentrations of these amphiphiles. Its maximum inhibition efficiency reaches 93.07% at 250 ppm for the compound (AED). Potentiodynamic polarization graphs demonstrated that tricationic amphiphiles behave as mixed-type inhibitors. In addition, the adsorption of the tricationic surfactant at the S90 steel surface followed Langmuir isotherm. Atomic force microscopy revealed that a protective layer formed at the surface of S90 steel caused the inhibition of corrosion. During the inhibition procedure of S90 steel corrosion, theoretical research has been performed to validate electrochemical experiments and to clearly demonstrate the mechanism of these amphiphiles. Finally, quantum chemical calculations were calculated to achieve the justification for the obtained empirical results.

Investigation of the inhibitory-bactericidal effect of amidoamine-based inorganic complexes against microbiological and atmospheric corrosion

In the process, inorganic complexes of amidoamines obtained from the interaction of natural petroleum acid and oleic acids with diethylenetriamine have been developed and their effectiveness as inhibitor-bactericides has been investigated. The effect of the synthesized reagents on the kinetics of the corrosion process of steel and the activity of sulphate-reducing bacteria in 3% NaCl solution saturated with CO2 and in the biphasic water–isopropyl alcohol medium with H2S dissolved has been analyzed. The thermodynamic and kinetic parameters of the corrosion process were calculated. The adsorption of the complexes was investigated using the Langmuir isotherm and the correlation constant was determined. State of the metal surface was investigated by SEM method in CO2 and H2S media, with and without inhibitors, and the metal surface contact of complexes was studied by computer molecular simulation.

AEO7 Surfactant as an Eco-Friendly Corrosion Inhibitor for Carbon Steel in HCl solution

The impact of AEO7 surfactant on the corrosion inhibition of carbon steel (C-steel) in 0.5 M HCl solution at temperatures between 20 °C and 50 °C was elucidated using weight loss and different electrochemical techniques. The kinetics and thermodynamic parameters of the corrosion and inhibition processes were reported. The corrosion inhibition efficiency (IE%) improved as the concentration of AEO7 increased. In addition, a synergistic effect was observed when a concentration of 1 × 10⁻³ mol L⁻¹ or higher of potassium iodide (KI) was added to 40 µmol L⁻¹ of the AEO7 inhibitor where the corrosion IE% increased from 87.4% to 99.2%. Also, it was found that the adsorption of AEO7 surfactant on C-steel surface followed the Freundlich isotherm. Furthermore, electrochemical impedance spectroscopy (EIS) and potentiodynamic polarization measurements indicated that AEO7 was physically adsorbed on the steel surface. The surface topography was examined using an optical profilometer, an atomic force microscope (AFM), and a scanning electron-microscope (SEM) coupled with an energy dispersion X-ray (EDX) unit. Quantum chemical calculations based on the density functional theory were performed to understand the relationship between the corrosion IE% and the molecular structure of the AEO7 molecule.

Evaluation of the corrosion inhibiting efficacy of a newly synthesized nitrone against St37 steel corrosion in acidic medium: Experimental and theoretical approaches

A novel amphiphilic nitrone, N-phenyl-1-(4-((11-(pyridin-1-ium-1yl) undecanoyl) oxy)phenyl)methanimine oxide bromide (NP-1-4-11-PUOPMOB) has been synthesized from a fatty acid derivative as a starting material. Structural characterization of the new compound has been realized by spectroscopic techniques (FTIR, ¹H NMR, and ¹³C NMR). The corrosion inhibition effect of the compound for St37 steel corrosion in 1 M HCl medium has been investigated using experimental (weight loss, electrochemical impedance spectroscopy, potentiodynamic polarization, dynamic electrochemical impedance spectroscopy) and theoretical approaches complemented by surface morphological examination using energy dispersive X-ray spectroscopy, scanning electron microscope, and atomic force spectroscopy. Results from both chemical and electrochemical techniques reveal that the presence of the nitrone in the acid solution impedes St37 steel corrosion. The inhibition efficiency obtained at 125 ppm and 150 ppm concentrations for all methods is found to be over 90%. NP-1-4-11-PUOPMOB behaves as a mixed type corrosion inhibitor according to the potentiodynamic polarization studies. The adsorption of NP-1-4-11-PUOPMOB molecules onto the metal surface follows Langmuir adsorption isotherm and the calculated K_ads (equilibrium constant of the adsorption process) value reflects strong interaction. There is evidence of NP-1-4-11-PUOPMOB adsorption on the metal surface from SEM, EDAX, and AFM studies. Experimental and theoretical results are in good agreement.

Experimental and theoretical studies on the corrosion inhibition of copper by two indazole derivatives in 3.0% NaCl solution

Corrosion experiments and theoretical calculations were performed to investigate the inhibition mechanism of indazole (IA) and 5-aminoindazole (AIA) for copper in NaCl solution. The results obtained from weight loss and electrochemical experiments are in good agreement, and reveal that these compounds are high-efficiency inhibitors with inhibition efficiency order: AIA>IA, which was further confirmed by field emission scanning electronic microscope (FESEM) observation. Besides, the quantum chemical calculations and molecular dynamics (MD) simulation showed that both studied inhibitors are adsorbed strongly on the copper surface in parallel mode. The adsorption of these molecules on copper substrate was found to obey Langmuir isotherm.

Corrosion inhibition of X70 sheets by a film-forming imidazole derivative at acidic pH

Chemisorbed IMPA film on X70 steel sheet has significantly reduced the corrosion rate of the metal substrate (up to 90%) in a chloride-enriched medium at pH 0.