Solvent free synthesized MnFe2O4@polyamid resin as a novel green nanohybrid for fast removing Congo red

Magnetization and ZIF-67 modification of Aspergillus flavus biomass for tetracycline removal from aqueous solutions: A stable and efficient composite

In the present work, the biomass of Aspergillus flavus (AF) was modified using magnetic nanoparticles MnFe2O4 and metal-organic framework of ZIF-67, and its ability to remove tetracycline antibiotic (TCH) was investigated. With the help of physicochemical tests, AF biomass modification with ZIF-67 and MnFe2O4 magnetic nanoparticles was confirmed. Based on the BET value, AF-MnFe2O4-ZIF-67 (139.83 m2/g) has a higher surface value than AF (0.786 m2/g) and AF/MnFe2O4 (17.504 m2/g). Also, the magnetic saturation value revealed that the modified biomass can be isolated from the treated solution using a simple magnetic field. Maximum TCH elimination (99.04%) using AF-MnFe2O4-ZIF-67 was obtained at pH 7, adsorber mass of 1 g/L, adsorption time of 40 min, and TCH content of 10 mg/L. The thermodynamic study indicated that the TCH abatement using the desired composite is spontaneous and exothermic. The experimental results showed that the adsorption process is compatible with the pseudo-second-order kinetic and Freundlich model. The maximum adsorption capacity for AF, AF-MnFe2O4, and AF-MnFe2O4-ZIF-67 was quantified to be 9.75 mg/g, 25.59 mg/g, and 43.87 mg/g, respectively. The reusability of the desired adsorbers was examined in up to 8 steps. The outcomes showed that the adsorbers can be used several times in TCH elimination. The provided composite can remove TCH from hospital wastewater, so it can be suggested for use in water and wastewater treatment works.

The Adsorption of CTC onto CFBs: A Study on Fabrication of Magnetic Cellulose/Fe3O4 Beads (CFBs) and Adsorption Kinetics

Magnetic cellulose/Fe₃O₄ beads (CFBs) were fabricated by dispersing Fe₃O₄ particles in a microcrystalline cellulose (MCC) matrix. The CFBs were characterized by X-ray diffraction (XRD), vibrating sample magnetometry (VSM), energy dispersive X-ray spectrometry (EDS), Brunauer-Emmett-Teller (BET) analysis and scanning electron microscopy (SEM). The adsorption behaviors of CFBs were studied by chlortetracycline hydrochloride (CTC) adsorption experiments. By means of adsorption kinetics and isotherms, the adsorption mechanisms were explored. The results show that quasi-spherical CFBs with a BET surface area as high as 119.63 m²/g were successfully tailored, with the high saturation magnetization (Ms > 40 emu/g) guaranteeing the magnetic separation of CFBs from wastewater. The process of adsorbing CTC onto CFBs involves monolayer chemical adsorption, and the maximum adsorption capacity for CTC estimated by the Langmuir model is 89.53 mg/g. The CFB product shows better adsorption performance in acidic solution than in basic solution.

Utilization of Sulfonated Waste Polystyrene-Based Cobalt Ferrite Magnetic Nanocomposites for Efficient Degradation of Calcon Dye

We presented a simple and efficient method for making a polymer–metal nanocomposite using various amounts of cobalt ferrite magnetic nanoparticles (CoFe₂O₄ MNp) with sulfonated waste polystyrene (SWPS) and utilized for Calcon dye degradation. The MNp was encapsulated with SWPS to avoid agglomeration and maintain its smaller size. ATR-FTIR, Raman spectroscopy, X-ray diffraction (XRD), thermogravimetric analysis (TGA), dynamic light scattering (DLS), field emission scanning electron microscopy (FESEM), high-resolution transmittance electron microscopy (HR-TEM), atomic force microscopy (AFM) and solid UV were used to analyze the produced polymeric magnetic nanoparticles (SWPS/MNp). As the MNp loading increases, the average particle size decreases. For Calcon dye degradation, SWPS/MNp (20 wt%) was utilized with a smaller average particle size, and the structural changes were detected using a UV-Vis spectrophotometer. As a result, the Calcon dye’s characteristic absorbance peak at 515 nm was red-shifted to 536 and 565 nm after 5 min, resulting in a color shift from dark brown to light blue that could be seen with the naked eye. A strong linear correlation was found between the red-shifted absorbance and the concentration of dye solution over the range of 10–100 ppm under optimal conditions. The proposed dye degradation process is simple, efficient, and environmentally friendly and has been successfully used to purify organic azo-dye-containing water.

Applications of Green Chemistry Approaches in Environmental Analysis

Background:

Green chemistry is the application of methodologies and techniques to reduce the use of hazardous substances, minimize waste generation and apply benign and cheap applications.

Methods:

In this article, the following issues were considered: greener solvents and reagents, miniaturization of analytical instrumentation, reagent-free methodologies, greening with automation, greener sample preparation methods, and greener detection systems. Moreover, the tables along with the investigated topics including environmental analysis were included. The future aspects and the challenges in green analytical chemistry were also discussed.

Results:

The prevention of waste generation, atomic economy, use of less hazardous materials for chemical synthesis and design, use of safer solvents, auxiliaries and renewable raw materials, reduction of unnecessary derivatization, design degradation products, prevention of accidents and development of real-time analytical methods are important for the development of greener methodologies.

Conclusion:

Efforts should also be given for the evaluation of novel solid phases, new solvents, and sustainable reagents to reduce the risks associated with the environment. Moreover, greener methodologies enable energy efficient, safe and faster that reduce the use of reagents, solvents and preservatives which are hazardous to both environment and human health.

Porous MnFe2O4@SiO2 magnetic glycopolymer: A multivalent nanostructure for efficient removal of bacteria from aqueous solution

The focuses of this research is to prepare an efficient magnetic glycopolymer for bacteria removal from aqueous solution. To perform this idea; porous MnFe₂O₄@SiO₂ was functionalized with glucose and or maltose as an anchors to adhere onto bacteria cell surface. Aminopropyltriethoxysilane was employed to link the saccharides on magnetic nanoparticle surface. The hybrid materials were characterized with XRD, VSM, FT-IR, FESEM, TEM, zeta potential measurement and elemental mapping. Microscopic image showed that MnFe₂O₄ is in cluster form composed from tiny nanoparticles. After saccharide functionalization hybrid composite generate hyper-crosslinked porous structure as a result of polysilicate formation due to hydrolysis of silica source. Escherichia coli and bacillus subtilis were selected as sample pathogens to evaluate the bacteria capturing ability of the magnetic glycopolymer. At the optimum conditions (pH = 6, time of 20 min, dosage of 15 mg) removal efficiency was more than 99% using both saccharide.

Effect of a pH-controlled co-precipitation process on rhodamine B adsorption of MnFe2O4 nanoparticles

We investigated the effect of a pH-controlled co-precipitation process on the adsorption behavior of manganese ferrite (MnFe₂O₄) nanoparticles as well as their structural and magnetic properties. The pH of prepared MnFe₂O₄ nanoparticles is typically an important factor affecting the adsorption capacity of an adsorbent. In this study, MnFe₂O₄ nanoparticles were prepared using a co-precipitation method at four different pH values of 9.0, 9.5, 10.0, and 10.5. The adsorption behaviors on rhodamine B (RhB) by MnFe₂O₄ nanoparticles prepared at different pH values were investigated. It was found that, via a pH-controlled process, MnFe₂O₄ nanoparticles prepared at pH 10.5 showed the highest RhB removal efficiency. The results indicated that the large pore size and surface charge of MnFe₂O₄ nanoparticles improved the adsorption capacities for RhB. Kinetic data were fitted to a pseudo-second order kinetic model and revealed that equilibrium was reached within 60 min. The isotherm data showed that the Langmuir maximum adsorption capacity of the MnFe₂O₄ nanoparticles prepared at pH 10.5 for RhB was 9.30 mg g⁻¹.

The MnFe₂O₄-pH 10.5 sample exhibited high adsorption capacity towards rhodamine B (RhB) solution. The high adsorption capacity towards RhB can be attributed to the large pore size and negative surface charge of MnFe₂O₄ nanoparticles.

Fabrication of Stable and Regenerable Amine Functionalized Magnetic Nanoparticles as a Potential Material for Pt(IV) Recovery from Acidic Solutions

MnFe₂O₄@SiO₂-NH₂ magnetic nanocomposite (AFMNC) adsorbent with a particle size of ∼50 nm was successfully synthesized using a facile approach. The as-prepared composite particles showed a fast binding of Pt(IV) with easy magnetic solid-liquid separation. The kinetic data were fitted to both pseudo-first and second-order rate models, indicating that AFMNC exhibited a much higher rate of Pt(IV) binding (0.125 g mg^-1 min^-1) compared to that of commercial ion-exchange resin Amberjet 4200 (0.0002 g mg^-1 min^-1). The equilibrium adsorption data were fitted to the Langmuir isotherm model with a relatively high sorption capacity of 380 mg/g. Scanning transmission electron microscopy analysis demonstrated the presence of platinum chloride after sorption on AFMNC, suggesting an adsorbate-adsorbent anion-exchange interaction. In addition, due to its magnetic characteristics, AFMNC can be easily separated from the aqueous medium after the sorption process. The novel nanocomposite may facilitate recovery of Pt(IV) from waste solutions.

Adsorption behavior and mechanism of heavy metal ions by chicken feather protein-based semi-interpenetrating polymer networks super absorbent resin

Preparation and metal ions adsorption of CFP-g-PKA/PVA semi-IPN super absorbent resin.