Corrosion inhibition effect of novel methyl benzimidazolium ionic liquid for carbon steel in HCl medium

Experimental and Theoretical Studies on Long Alkyl Chain-Bearing Dibenzotriazole Ionic Liquids as Eco-friendly Corrosion Inhibitors in Aqueous Hydrochloride Acid

Three long alkyl chain-bearing dibenzotriazole ionic liquids (BTA-R-BTA, R = 8, 12, and 16) were synthesized with high yield (>98%) through a simple and eco-friendly process. Their anticorrosion performance for Q235 carbon steel in 6 M hydrochloride acid was comprehensively evaluated by weight loss tests, electrochemical methods (potentiodynamic polarization and electrochemical impedance spectroscopy), and surface analysis techniques. As the length of the alkyl chain increased, the maximum corrosion inhibition efficiency enhanced from 55.02% (for BTA-8-BTA at 1.2 mM) to 97.10% (for BTA-12-BTA at 0.3 mM) and 98.84% (for BTA-16-BTA at 0.3 mM). Density functional theory calculation indicated that the alkyl chain length had little influence on the inhibitors' electronic structures, while molecular dynamics simulations revealed that the thickness, surface coverage, and compactness of adsorption films formed at the metal-electrolyte interface increased with the elongated alkyl chain. Corrosion inhibition efficiency is strongly correlated with the structures of the adsorption film.

Citrullus colocynthis fruit extract as effective eco-friendly corrosion inhibitor in a hydrochloric acid pickling medium for carbon steel by using both experimental and theoretical studies

The present study focuses on an environmental approach based on the use of an eco-friendly corrosion inhibitor from the Citrullus colocynthis fruit extract for enhancement corrosion resistance of carbon steel (C-S) in acid medium as an alternative to various organic and non-organic chemical inhibitors. The evaluation of the inhibition properties of the fruit methanolic extract of Citrullus colocynthis (CCE) were performed in molar hydrochloric acid (1 M HCl) medium using gravimetric and electrochemical (potentiodynamic polarization and AC impedance) techniques as well as surface analyses. CCE is rich in amino acids, mainly citrulline and β-(pyrazo-1-yl)-L-analine molecules. Based on the weight loss evaluation, the results demonstrated that this plant extract acts as an effective corrosion inhibitor and a protection level of 93.6% was attained at 500 ppm of CCE after 6 h of metal exposure at 303 K. According to polarization curves, CCE functions as a mixed-type inhibitor. In addition, AC impedance analyses have shown that the incorporation of CCE into the corrosive solution leads to a decrease in load capacity, while improving the charge/discharge function at the interface. This suggests the possibility of the formation of an adsorbed layer on the C-S surface. In addition, scanning electron microscope (SEM) observation, contact angle measurements, and Fourier-transform infrared spectroscopy (FTIR) analyses supported the development of a protective film over CS substrate surface afterwards addition of CCE. Langmuir and/or Temkin isotherms can be used to characterize the adsorption of this organic inhibitor on the C-S surface. X-ray photoelectron spectroscopy (XPS) has revealed that the inhibiting effect of CCE on the corrosion of C-S in 1 M HCl solution is mainly controlled by a chemisorption process and the inhibitive layer is composed of an iron oxide/hydroxide mixture where CCE molecules are incorporated. In order to understand the relationship between the molecular structure and anti-corrosion effectiveness of these inhibitor molecules, quantum chemical studies were carried out using density functional theory (DFT) and molecular dynamics (MD) simulation.

Electrochemical, surface analysis, computational and anticorrosive studies of novel di-imine Schiff base on X65 steel surface

The inhibitory effect of di-imine-SB namely ((N¹Z, N⁴E)-N¹, N⁴-bis (4 (dimethylamino) benzylidene) butane 1,4-diamine) on X65-steel in 1 M HCl has been investigated experimentally and theoretically. The electrochemical impedance spectroscopy (EIS), potentiodynamic polarization (PDP), and weight loss outcomes display the anticorrosion properties of "di-imine- SB". The inhibitory efficiency exceeds 90% at the optimal concentration of 1 × 10^-3 M "di-imine- SB". The metal surface was examined further using scanning electron microscope (SEM) and energy dispersive X-ray (EDX). The effectiveness of the di-imine-SB is returned into its adsorption on X65-steel surface and found in agreement with Langmuir adsorption isotherm. According to the standard Gibbs free energy of adsorption [Formula: see text], di-imine-SB adsorption tends to be chemical rather than physical, it increases the activation energy ([Formula: see text]) of metal dissolution reaction and makes it hard to occur. The PDP data suggested anodic and cathodic type of the di-imine-SB inhibitor. Meanwhile, increasing the resistance of X65-steel to 301 Ω cm² after adding 1 mM of di-imine-SB confirms its protective effect. Whereas, the positive value of the fraction of electron transference (ΔN, 0.746), confirms the affinity of di-imine-SB to share electrons to the partially filed 3d-orbital of Fe forming strong protective film over X65-steel surface. Aided by Monte Carlo (MC) simulation, the calculated adsorption energy (E_ads) suggests excessive adsorption affinity of di-imine-SB on metal surface over the corrosive chlorides and hydronium ions. A good correlation between the theoretical hypothesis and the experimental inhibition efficiency has been achieved. The comparative study showed the superior of the di-imine-SB as potential corrosion inhibitor compared with those reported before. Finally, global reactivity descriptors; electron affinity (A), ionization potential (I), electronegativity (χ), dipole moment (µ), global hardness ([Formula: see text]), electrophilicity index and, Fukui indices were also calculated and found well correlated to the reactivity of di-imine-SB.

Controlling the Hydrogen Generation Reaction from Waste Water in Oil Fields Using an Ionic Liquid

Hydrogen production technologies are attracting widespread interest in energy technologies. The conventional methods for hydrogen production suffer from high cost, restricting their production everywhere. Here, we use waste formation water from a petroleum field and carbon steel materials to produce hydrogen. The most suitable conditions have been investigated to maximize the hydrogen yield. In addition, an ionic liquid (i.e., tributylmethylammonium methyl carbonate, BMAMC) has been used to control the hydrogen generation reaction. We reveal that the amount of hydrogen release rapidly increases with decreasing pH of the solution from 6.7 to 2.5. A further increase in temperature resulted in more amount of hydrogen release. Our study investigates the influence of chloride ions on hydrogen generation activity. The results revealed that ionic liquid BMAMC remarkably decreases the amount of hydrogen release with an efficiency of 92% at 5.08 × 10^-4 M. The addition of ionic liquid BMAMC into waste formation water increases the activation energy of the hydrogen generation reaction. The Langmuir model is the best isotherm describing the adsorption of BMAMC on carbon steel. Finally, to confirm the adsorption of the ionic liquid BMAMC, scanning electron microscopy and Fourier-transform infrared spectroscopy analysis were conducted.

Corrosion Inhibition Studies of 8-Hydroxyquinoline Derivatives for N80 Steel in a 1.0 M HCl Solution: Experimental, Computational Chemistry, and Quantitative Structure-Activity Relationship Studies

Twelve kinds of 8-hydroxyquinoline derivatives were synthesized and characterized. The weight loss method was used to evaluate their inhibition efficiencies (IEs) in a 1.0 M HCl solution at 333 K. The results showed that the alkyl chain length, heteroatoms (S, N, and O), and number of benzene rings significantly affect the IE. Herein, the IE of 5-[(dodecylthio)methyl]-8-quinolinol reached 98.71%. Meanwhile, the potentiodynamic polarization results indicated that all 8-hydroxyquinoline derivatives were mixed-type inhibitors. Electrochemical impedance spectroscopy results revealed that 8-hydroxyquinoline derivatives can increase polarization resistance, supporting their adsorption on the N80 steel surface. Moreover, according to density functional theory (DFT), the frontier orbital distribution and quantum chemical parameters (E_HOMO, E_LUMO, dipole moment μ, etc.) were calculated, and the results confirmed that the substituents of protonated 8-hydroxyquinoline derivatives significantly influenced the frontier orbital distribution. Molecular dynamics simulation illustrated that all protonated 8-hydroxyquinoline derivatives were adsorbed parallel to the Fe(110) surface, and the interaction energy (E_int) evidenced that the molecular size would affect their strength of adsorption on the Fe(110) surface. The linear and nonlinear quantitative structure-activity relationship models were established by linear regression (LR) methods and BP neural networks (NN), respectively. The LR model was established by using E_int and μ, and the coefficient of determination (R²) was 0.934. In addition, the nonlinear NN model was obtained according to IE and all parameters (DFT parameters and E_int). Then, the two calculation inhibition efficiencies (IE_cal) were obtained from the LR and NN models, and the R² values of the linear correlation between the IE_cal and the experimental IE were 0.940 and 0.951, respectively. In addition, the IE of the tested inhibitor was 51.86% and the IE_cal values predicted by the LR and NN models were 52.68% and 53.06%, respectively. Our results demonstrate that both the LR and NN models have good fits and predictive ability.

Effectiveness of Some Novel Ionic Liquids on Mild Steel Corrosion Protection in Acidic Environment: Experimental and Theoretical Inspections

Three ionic liquids (ILs)-1-butyl-1-methyl-pyrrolidinium Imidazolate (BMPyrIM), 1-butyl-3-methyl-imidazolium Imidazolate (BMImIM), and bis(1-butyl-3-methyl-imidazolium Imidazolate) (BBMImIM)-were synthesized and examined experimentally and theoretically as potential inhibitors for mild steel corrosion in HCl (1.0 M) solution. To our knowledge, two of the ILs successfully synthesized in our laboratory named BMPyrIM and BBMImIM are novel. Different electrochemical (potentiodynamic polarization (PDP), electrochemical impedance spectroscopy (EIS)), surface and structural (scanning electron microscopy (SEM), Energy-dispersive X-ray spectroscopy (EDS), Atomic force microscopy (AFM) and Fourier Transform Infrared Spectroscopy (FTIR)) and theoretical (Density functional theory (DFT)) techniques were utilized to confirm their use as efficient environmentally safe inhibitors. These ionic liquids were designed to study the cation effect (imidazolium and pyrrolidinium) and the dimeric effect of the imidazolium-based IL. A pronounced inhibiting effect was recorded using the optimum concentration (5 × 10^-3 M) of BBMImIM with protection efficiency of 98.6% compared to 94.3% and 92.4% for BMImIM and BMPyrIM, respectively. The investigated ILs act as a mixed-type corrosion inhibitors and their protection obeys Langmuir adsorption isotherm. The results obtained by SEM, EDS and AFM confirmed the mild steel protection by the formation of protective film of the ILs on the steel surface resulted in less damaged surfaces compared with the blank solution. Furthermore, quantum chemical calculations illustrated the electronic structure of the investigated ILs and their optimized adsorptiοn configurations on mild steel surface. The findings from the different techniques helped to provide a supported interpretation of the inhibition mechanism.

Organic Compounds as Corrosion Inhibitors for Carbon Steel in HCl Solution: A Comprehensive Review

Most studies on the corrosion inhibition performance of organic molecules and (nano)materials were conducted within “carbon steel/1.0 M HCl” solution system using similar experimental and theoretical methods. As such, the numerous research findings in this system are sufficient to conduct comparative studies to select the best-suited inhibitor type that generally refers to a type of inhibitor with low concentration/high inhibition efficiency, nontoxic properties, and a simple and cost-economic synthesis process. Before data collection, to help readers have a clear understanding of some crucial elements for the evaluation of corrosion inhibition performance, we introduced the mainstay of corrosion inhibitors studies involved, including the corrosion and inhibition mechanism of carbon steel/HCl solution systems, evaluation methods of corrosion inhibition efficiency, adsorption isotherm models, adsorption thermodynamic parameters QC calculations, MD/MC simulations, and the main characterization techniques used. In the classification and statistical analysis section, organic compounds or (nano)materials as corrosion inhibitors were classified into six types according to their molecular structural characteristics, molecular size, and compound source, including drug molecules, ionic liquids, surfactants, plant extracts, polymers, and polymeric nanoparticles. We outlined the important conclusions obtained from recent literature and listed the evaluation methods, characterization techniques, and contrastable experimental data of these types of inhibitors when used for carbon steel corrosion in 1.0 M HCl solution. Finally, statistical analysis was only performed based on these data from carbon steel/1.0 M HCl solution system, from which some conclusions can contribute to reducing the workload of the acquisition of useful information and provide some reference directions for the development of new corrosion inhibitors.

Application of surfactants as anticorrosive materials: A comprehensive review

Corrosion is the degradation of a metal due to its reaction with the environment. One of the most efficient ways of securing metal surfaces from corrosion is the use of corrosion inhibitors. Their efficacy is connected to their chemical composition, their molecular structures, and their adsorption affinities on the metal surface. This review article focuses on the prospects of different types of monomeric and gemini surfactants, mixed surfactants systems, surfactants- additives mixed systems, inhibitors-surfactants (as additives) mixed systems, and ionic liquid based surfactants as promising corrosion-inhibiting formulations in the aqueous phase and the role of surfactants in developing protective coatings. The analysis starts with an accurate overview of the characteristics, types, and structure-property-performance relationship of anti-corrosion formulations of such inhibitors.

Adsorption and inhibition behavior of imidazolium tetrafluoroborate derivatives as green corrosion inhibitors for carbon steel

The adsorption and inhibition mechanism of chain length increase and group substitution of imidazole tetrafluoroborate derivatives for the corrosion inhibition of carbon steel in HCl solution was revealed in detail via the density functional theory, molecular dynamics (MD) simulation, and quantitative structure-activity relationship (QSAR) methods. The main reactive site of an ionic liquid is located on its imidazolium ring. With alkyl chain lengthening or the introduction of methyl groups onto the imidazolium ring, its molecular reactivity and electron-donating ability increase the interaction between the ionic liquid and the Fe (110) surface. Therefore, the imidazolium rings of four IL inhibitors are more likely to lie on the Fe (110) surface in parallel through chemical adsorption. The interactions between N atoms in ionic liquids and the Fe (110) surface are stronger than those between the C atoms on the imidazolium rings of the four ionic liquid, and coordination bonds can be formed between N atoms and the Fe (110) surface. Therefore, ionic liquids can hinder the interaction between corrosion particles and the Fe (110) surface, hinder the diffusion of corrosion particles, and effectively reduce the number density of corrosion particles on the Fe (110) surface. A methyl substituent on the C2 atom of the imidazolium ring can enhance the electron-donating ability and adsorption tendency much more than an increase in the alkyl chain on the N3 atom. The four inhibitors are ordered in terms of corrosion inhibition efficiency as [C₁₂DMIM]BF₄ > [C₁₀DMIM]BF₄ > [C₁₂MIM]BF₄ > [C₁₀MIM]BF₄, which agrees well with the experimental results. A good correlation between experimental inhibition efficiency, concentration and microscopic structures parameters of ILs such as energy gap ΔE, polarizability P, electronegativity χ, hardness η, softness σ, number of electrons transferred ΔN, and electrophilicity ω was achieved.

The effect of regional selectivity on the corrosion inhibition properties of synthetic ionic liquid via the synergistic action of the cation and anion

By adding different proportions of N-butylimidazole and carboxyethylthiosuccinic acid (CETSA), three hybrid systems of ionic liquids were synthesized and named ILHS1, ILHS2 and ILHS3.

Zirconium based porous coordination polymer (PCP) bearing organocatalytic ligand: A promising dual catalytic center for ultrasonic heterocycle synthesis

Herein, the efficient role of ultrasonic irradiation both in synthesis of Zr based porous coordination polymer (Zr-PCP) nanoparticles and boosting its catalytic activity, towards the benzimidazoles synthesis is represented. We use an amine based ligand (amino-terephthalate) for PCP and we exhibit that it can have a synergistic catalytic activity. In this work, a unique nano-engineering of cooperative and synergistic catalytic activity of zirconium, as a Lewis acid, and aminophenylene, as an organocatalyst, in the synthesis of heterocycles is presented for the synthesis of benzimidazole from cascade reaction of phenylene diamine with aldehyde at ambient temperature. Zr and amine groups of the Zr-PCP are active catalytic sites which in combination with the ultrasonic irradiation leads to a high selectivity and rapid catalytic production of benzylimidazoles. N₂ adsorption-desorption along with BJH analyses confirm the microporosity of the catalyst and recyclability shows that the catalyst is green and sustainable heterogeneous microporous catalyst.

The synthesis and characterization of benzotriazole-based cationic surfactants and the evaluation of their corrosion inhibition efficiency on copper in seawater

This study aims at preparing three cationic surfactants based on benzotriazole and evaluating their efficiencies as corrosion inhibitors for copper electrodes in seawater using different electrochemical techniques (potentiodynamic polarization, electrochemical impedance spectroscopy (EIS) and atomic force microscopy (AFM)). FTIR and ¹H NMR spectroscopic techniques confirmed the chemical structures of the as-prepared cationic compounds. The inhibition efficiency increased with the increase the concentration of the as-prepared compounds in the solution. The curves of the potentiodynamic polarization and the plots of EIS techniques show that the performance of all investigated compounds as mixed type. The standard free energy values imply that the three as-prepared compounds show physicochemical adsorption and obey the Langmuir adsorption model. AFM technique observed the reduction in the surface roughness due to the protective film formed on the copper surface. Finally, computational calculations show a great correlation with the experimental results due to the electron-donating effect.

Three cationic surfactants based on benzotriazole were prepared and their efficiencies as corrosion inhibitors for copper electrodes in seawater were evaluated using different electrochemical techniques (polarization methods, EIS techniques and atomic force microscopy).