Sonochemical preparation and photocatalytic application of Ag-ZnS-MWCNTs composite for the degradation of Rhodamine B under visible light: Experimental design and kinetics modeling

Sulfidogenic Bioreactor-Mediated Formation of ZnS Nanoparticles with Antimicrobial and Photocatalytic Activity

The use of sulfidogenic bioreactors is a biotechnology trend to recover valuable metals such as copper and zinc as sulfide biominerals from mine-impacted waters. In the present work, ZnS nanoparticles were produced using "green" H₂S gas generated by a sulfidogenic bioreactor. ZnS nanoparticles were physico-chemically characterized by UV-vis and fluorescence spectroscopy, TEM, XRD and XPS. The experimental results showed spherical-like shape nanoparticles with principal zinc-blende crystalline structure, a semiconductor character with an optical band gap around 3.73 eV, and fluorescence emission in the UV-visible range. In addition, the photocatalytic activity on the degradation of organic dyes in water, as well as bactericidal properties against several bacterial strains, were studied. ZnS nanoparticles were able to degrade methylene blue and rhodamine in water under UV radiation, and also showed high antibacterial activity against different bacterial strains including Escherichia coli and Staphylococcus aureus. The results open the way to obtain valorous ZnS nanoparticles from the use of dissimilatory reduction of sulfate using a sulfidogenic bioreactor.

Waste-Coffee-Derived Activated Carbon as Efficient Adsorbent for Water Treatment

Activated carbon prepared from waste coffee was utilized as a potential low-cost adsorbent to remove Rhodamine B from aqueous solution. A series of physical characterizations verify that the obtained activated carbon possesses a layered and ordered hexagonal structure with a wrinkled and rough surface. In addition, high specific surface area, appropriate pore distribution, and desired surface functional groups are revealed, which promote the adsorption properties. Various adsorption experiments were conducted to investigate the effect on the absorption capacity (e.g., of initial dye concentration, temperature and solution pH) of the material. The results showed that the waste-coffee-derived activated carbon with a large surface area of approximately 952.7 m² g^-1 showed a maximum uptake capacity of 83.4 mg g^-1 at the pH of 7 with the initial dye concentration of 100 mg L^-1 under 50°C. The higher adsorption capacity can be attributed to the strong electrostatic attraction between the negatively charged functional groups in activated carbon and the positively charged functional groups in RB. The kinetic data and the corresponding kinetic parameters were simulated to evaluate the mechanism of the adsorption process, which can fit well with the highest R². The adsorption results confirmed the promising potential of the as-prepared waste-coffee-derived activated carbon as a dye adsorbent.

Light driven Aspergillus niger-ZnS nanobiohybrids for degradation of methyl orange

Inorganic-microbial hybrid systems have potential to be sustainable, efficient and versatile chemical synthesis platforms by integrating the light-harvesting properties of semiconductors with microbial cells. Here, we demonstrate light-driven photocatalytic semiconducting Aspergillus niger cells-ZnS nanoparticles for enhanced removal of the dye methyl orange. Chemically synthesized ZnS nanoparticles exhibited a zinc blende pattern in X-ray diffraction, had a dimension of 20-90 nm with a band gap (E_bg) of 3.4 eV at 1.83 × 10¹⁸ photons/second. Biologically synthesized ZnS nanoparticles of 40-90 nm showed a hexagonal pattern in the X-ray powder diffraction spectra with an E_bg 3.7 eV at 1.68 × 10¹⁸ photons/second. At a methyl orange (MO) concentration of 100 mg/L, dosage of 0.5 × 10⁵ mol catalyst and pH 4, a 97.5% and 98% removal efficiency of MO was achieved in 90 min and 60 min for, respectively, chemically and biologically synthesized ZnS nanobiohybrids in the presence of UV-A light. The major degradation products of photocatalysis for chemically synthesized ZnS nanobiohybrids were naphtholate (C₁₀H₇O m/z 143) and hydroquinone (C₉H₅m/z 113). For the biologically synthesized ZnS nanobiohybrids, the degradation products were hydroquinone (C₉H₅m/z 113) and 2-phenylphenol (C₁₂H₁₀O m/z 170).

Two-Dimensional ZnS/SnS2 Heterojunction as a Direct Z-Scheme Photocatalyst for Overall Water Splitting: A DFT Study

Direct Z-scheme photocatalysts have attracted extensive attention due to their strong redox ability and efficient separation of photogenerated electron-hole pairs. In this study, we constructed two types of ZnS/SnS₂ heterojunctions with different stacking models of ZnS and SnS₂ layers, and investigated their structures, stabilities, and electronic and optical properties. Both types of heterojunctions are stable and are direct Z-scheme photocatalysts with band gaps of 1.87 eV and 1.79 eV, respectively. Furthermore, their oxidation and reduction potentials straddle the redox potentials of water, which makes them suitable as photocatalysts for water splitting. The built-in electric field at the heterojunction interface improves the separation of photogenerated electron-hole pairs, thus enhancing their photocatalytic efficiency. In addition, ZnS/SnS₂ heterojunctions have higher carrier mobilities and light absorption intensities than ZnS and SnS₂ monolayers. Therefore, the ZnS/SnS₂ heterojunction has a broad application prospect as a direct Z-scheme visible-light-driven photocatalyst for overall water splitting.

Modeling the degradation and disinfection of water pollutants by photocatalysts and composites: A critical review

Recently, a series of new photocatalysts have been developed for to combat diverse bio-recalcitrant contaminants and the inactivation of bacteria. Modeling photocatalytic processes is important to assess these materials, and to understand and optimize their performance. In this study, the recent literature is critically reviewed and analyzed to identify and compare methods of modeling photocatalytic performance. The Langmuir-Hinshelwood model (L-H) has been used in many studies to rationalize the degradation kinetics of single contaminants because it is the simplest model including both the adsorption equilibrium and degradation rates. Other studies report the development of more sophisticated variants of the L-H model that include the rates of catalyst excitation, recombination of electron-hole pairs, production of reactive oxygen species (ROS), and formation of by-products. Modified Chick-Watson (CW) and Hom models have been used by many researchers to include lag phases of bacteria in the description of disinfection kinetics. Artificial neural networks (ANNs) have been used to analyze the effects of operational conditions on photocatalyst performance. Moreover, response surface methodology (RSM) has been employed for experimental design, and optimization of operational conditions. We have reviewed and analyzed all available articles that model photocatalytic activity towards water pollution, summarized and put them in context, and recommended future research directions.

Ultrasound-assisted Synthesis of Ag-ZnS/rGO and its Utilization in Photocatalytic Degradation of Tetracycline Under Visible Light Irradiation

Recent improvements based on heterojunction nanocomposites have opened new possibilities in photocatalysis. In this research, an ultrasound-assisted coprecipitation method was used to fabricate silver, zinc sulfide and reduced graphene oxide (Ag-ZnS/rGO) nanocomposite, and characterization results indicated that 3% Ag-ZnS spherical nanoparticles are successfully embedded in rGO matrix. The potential of the Ag-ZnS/rGO, as a visible light active photocatalyst, was assessed through optimizing degradation of Tetracycline (TC) by response surface methodology. It was found that the photocatalytic degradation of TC increased with an increase in the amount of nanocomposite and irradiation time, whereas it decreased with increasing the initial TC concentration. Under the optimal conditions (10 mg L^-1 of TC, 1.25 g L^-1 of Ag-ZnS/rGO, at pH = 7, and irradiation duration 110 min), more than 90% of the TC was degraded. The study of the mechanism of the photocatalytic process disclosed that the synergistic role of surface plasmon resonance (SPR) induced by Ag nanoparticles and p-type semiconductor feature of rGO leads to ZnS semiconductor stimulation in the visible light region. Eventually, a pseudo-first order kinetics model was developed based on the proposed mechanism. The obtained results highlight the role of Ag-ZnS/rGO nanophotocatalyst toward degradation of some antibiotics under visible light.