Ionic liquids with two typical hydrophobic anions as acidic corrosion inhibitors

Zwitterion modified chitosan as a high-performance corrosion inhibitor for mild steel in hydrochloric acid solution

Herein, a novel chitosan Schiff base (CS-FGA) as a sustainable corrosion inhibitor has been successfully synthesized via a simple amidation reaction by using an imidazolium zwitterion and chitosan (CS). The corrosion inhibition property of CS-FGA for mild steel (MS) in a 1.0 M HCl solution was studied by various electrochemical tests and physical characterization methods. The findings indicate that the maximum inhibition efficiency of CS-FGA as a mixed-type inhibitor for MS in 1.0 M HCl solution with 400 mg L-1 reaches 97.6 %, much much higher than the CS and the recently reported chitosan-based inhibitors. Scanning electron microscopy (SEM), atomic force microscopy (AFM), and water contact angle (WCA) results reveal that the CS-FGA molecules firmly adsorb on the MS surface to form a protective layer. The adsorption of CS-FGA on the MS surface belongs to the Langmuir adsorption isotherm containing both the physisorption and chemisorption. According to the X-ray photoelectron spectroscopy (XPS) and UV-vis spectrum, FeN bonds presented on the MS surface further prove the chemisorption between CS-FGA and Fe to generate the stable protective layer. Additionally, theoretical calculations from quantum chemical calculation (DFT) and molecular simulations (MD) were performed to reveal the inhibition mechanism of CS-FGA.

Exploring the Efficacy of Benzimidazolone Derivative as Corrosion Inhibitors for Copper in a 3.5 wt.% NaCl Solution: A Comprehensive Experimental and Theoretical Investigation

This study focuses on the synthesis, theoretical analysis, and application of the corrosion inhibitor known as benzimidazolone, specifically 1-(cyclohex-1-enyl)-1,3-dihydro-2H-benzimiazol-2-one (CHBI). The structure of CHBI was determined by X-ray diffraction (XRD). The inhibitory properties of CHBI were investigated in a 3.5 wt.% NaCl solution on pure copper using various electrochemical techniques such as potentiodynamic polarization curves (PDPs) and electrochemical impedance spectroscopy (EIS), as well as scanning electron microscopy with energy dispersive X-ray spectroscopy (SEM-EDX), UV-visible spectroscopy, and theoretical calculations. The obtained results indicate that CHBI is an excellent inhibitor, exhibiting remarkable effectiveness with an inhibition rate of 86.49% at 10-3 M. To further confirm the extent of adsorption of the inhibitory molecule on the copper surface, density functional theory (DFT) and Monte Carlo (MC) simulation studies were conducted. The results of this study demonstrate the synthesis and characterization of CHBI as a corrosion inhibitor. The experimental and theoretical analyses provide valuable insights into the inhibitory performance of CHBI, indicating its strong adsorption on the copper surface.

Corrosion inhibition mechanism of imidazole ionic liquids with high temperature in 20% HCl solution

BACKGROUND

This paper focuses on the chemical and physical adsorption of 1-hexyl-2,3-dimethyl imidazolium bromide (HDMIMBr), 1-decyl-2,3-dimethyl imidazolium bromide (DDMIMBr), and 1-hexadecyl-2,3-dimethyl imidazolium bromide (C16DMIMBr) on the surface of mild steel at high temperature in order to explore the mechanism of a corrosion inhibitor in a complex environment.

METHODS

Gravimetric, scanning electron microscope, X-ray photoelectron spectroscopy, and electrochemical tests explored the corrosion inhibition performance from the experimental level. Quantum chemical calculations and molecular dynamics simulations reveal the corrosion inhibition mechanism from the molecular scale.

RESULTS

The results show that the longer the alkyl chain of the three corrosion inhibitors studied, the better the corrosion inhibition performance. This is due to the hydrophobic effect of the long alkyl chain, which has its own synergistic effect and then self-assembles to form an adsorption film with a multilayer structure.

CONCLUSION

This dense adsorption film makes corrosion inhibitors a good application prospect in complex corrosive environments.

Organic Compounds as Corrosion Inhibitors for Carbon Steel in HCl Solution: A Comprehensive Review

Most studies on the corrosion inhibition performance of organic molecules and (nano)materials were conducted within "carbon steel/1.0 M HCl" solution system using similar experimental and theoretical methods. As such, the numerous research findings in this system are sufficient to conduct comparative studies to select the best-suited inhibitor type that generally refers to a type of inhibitor with low concentration/high inhibition efficiency, nontoxic properties, and a simple and cost-economic synthesis process. Before data collection, to help readers have a clear understanding of some crucial elements for the evaluation of corrosion inhibition performance, we introduced the mainstay of corrosion inhibitors studies involved, including the corrosion and inhibition mechanism of carbon steel/HCl solution systems, evaluation methods of corrosion inhibition efficiency, adsorption isotherm models, adsorption thermodynamic parameters QC calculations, MD/MC simulations, and the main characterization techniques used. In the classification and statistical analysis section, organic compounds or (nano)materials as corrosion inhibitors were classified into six types according to their molecular structural characteristics, molecular size, and compound source, including drug molecules, ionic liquids, surfactants, plant extracts, polymers, and polymeric nanoparticles. We outlined the important conclusions obtained from recent literature and listed the evaluation methods, characterization techniques, and contrastable experimental data of these types of inhibitors when used for carbon steel corrosion in 1.0 M HCl solution. Finally, statistical analysis was only performed based on these data from carbon steel/1.0 M HCl solution system, from which some conclusions can contribute to reducing the workload of the acquisition of useful information and provide some reference directions for the development of new corrosion inhibitors.

Insight into the anti-corrosion performance of two food flavors as eco-friendly and ultra-high performance inhibitors for copper in sulfuric acid medium

2,5-dihydroxy-1,4-dithiane (DDD) and 2,5-dimethy- [1.4] dithiane-2,5-diol (DTDD) two food flavors as environmentally-friendly inhibitors for Cu in 0.5 mol/L H₂SO₄ media were researched via theoretical calculation and experimental ways. Electrochemical measurement data showed that DDD and DTDD can exhibit high level anti-corrosion feature. The anti-corrosion efficiency of DDD and DTDD were as high as 99.6% and 98.9%, respectively. The atomic force microscope (AFM) and scanning electron microscope (SEM) tests showed that the Cu specimens were immersed in the H₂SO₄ with 5 mM DDD and DTDD for 30 h at the 298 K, and the Cu specimen surface was still smooth. Besides, the adsorption of DDD and DTDD at the interface of Cu/solution was comply with Langmuir adsorption. Theoretical calculation data showed that DDD exhibit more ascendant anti-corrosion feature than DTDD.

Effect of Imidazole as Corrosion Inhibitor on Carbon Steel Weldment in District Heating Water

Many research studies have been conducted on the corrosion inhibition performance of imidazole in acidic environments such as in the piping of a petrochemical plant. However, there has been no study on the effect of imidazole in alkaline conditions such as a local district water heating environment. Therefore, in this study, the effect of imidazole as a corrosion inhibitor on carbon steel weldment was investigated in alkaline district heating water. Inhibition efficiency and electrochemical properties were investigated by potentiodynamic polarization test and electrochemical impedance spectroscopy. As the concentration of imidazole increased up to 500 ppm, inhibition efficiency increased up to 91.7%. At 1000 ppm, inhibition efficiency decreased. Atomic force microscopy showed that surface coverage of imidazole at 1000 ppm is lower than that of imidazole at 500 ppm. X-ray photoelectron spectroscopy showed that with 500 ppm of imidazole, the amount of pyrrole type interaction is 4.8 times larger than pyridine type interaction. At 1000 ppm of imidazole, the amount of pyridine type interaction is 3.49 times larger than pyrrole type interaction. Depending on the concentration of imidazole, the ratio of interaction between carbon steel and imidazole affected inhibition efficiency.

Hyperbranched molecules having multiple functional groups as effective corrosion inhibitors for Al alloys in aqueous NaCl

Hyperbranched molecules are a kind of promising materials due to their unique structures. In this work, two hyperbranched molecules (GON and GOH) are used as effective inhibitors for Al alloys in NaCl solution. Their inhibitive performances are evaluated by electrochemical measurements and surface characterization. The results indicate that inhibition performances of GON and GOH are closely related to the concentrations, influenced by the combination of steric hindrance and bonding effects. At relatively low concentrations (0.03-0.10 mM), GON displays a more pronounced ability to inhibit corrosion than GOH, owing to more anchoring functional groups. Oppositely, GOH has good inhibition performance at higher concentrations (0.50-1.00 mM). The interaction between the Al electrode and GOH results in the formation of a more condenser protective film than GON at high concentrations. In addition, the adsorption mechanism of two hyperbranched molecules is revealed by theoretical calculations.

Corrosion Inhibition Performances of Imidazole Derivatives-Based New Ionic Liquids on Carbon Steel in Brackish Water

In this study, imidazole derivative-based new ionic liquids were investigated as corrosion inhibitors. These new ionic liquids (ILs) are 1,3-dipropyl-2-(2-propoxyphenyl)-4,5-diphenylimidazole iodide (IL1) and 1,3-dibutyl-2-(2-butoxyphenyl)-4,5-diphenylimidazole iodide (IL2). The corrosion inhibition effects of two new ILs were observed on carbon steel in brackish water media (1% NaCl solution). Carbon steel coupons were exposed to 1% NaCl solution with various concentrations of ILs. Corrosion inhibition effects were tested by the electrochemical impedance spectroscopy (EIS) method and the Tafel method at various temperatures ranging from 25 °C to 55 °C. The results showed that ILs have potential as corrosion inhibitors and the adsorption mechanisms of IL1 and IL2 on carbon steel surfaces were also determined, which followed the Langmuir adsorption isotherm model. Acquisition of ∆Gads values of IL1 and IL2 were −35.04 and −34.04 kJ/mol, respectively. The thermodynamic data of the ILs show that semi-chemical and or physical adsorptions occurred on carbon steel surfaces.

Corrosion Inhibition Mechanism of Mild Steel by Amylose-Acetate/Carboxymethyl Chitosan Composites in Acidic Media

This article details an investigation on the mechanism of corrosion inhibition of mild steel using amylose-acetate-blended carboxymethyl chitosan (AA-CMCh) in acidic media in the context of kinetic and thermodynamic parameters. The surface of mild steel was exposed to test solutions and evaluated using scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDX). The activation energy (Ea), free energy of adsorption (ΔG), enthalpy of activation (ΔHads), and entropy of activation (ΔSads) were determined in order to elucidate the mechanism of corrosion inhibition. The results confirmed that AA could be improved using CMCh as a corrosion inhibitor. The corrosion rate decreased from 1109.00 to 229.70 mdd (79.29%), while corrosion inhibition increased from 35.13 to 89.72%. Sulfate acid (H2SO4) of 0.25 M also helped in decreasing the corrosion rate from 2664.4 to 1041.67 mdd (60.9%) while also in increasing corrosion inhibition from 56.94 to 68.31%. The calculated values for ΔG, ΔHads, and ΔSads were −33.22 kJ·mol−1, −48.56 kJ·mol−1, and 0.0495 kJ·mol−1·K−1, respectively. The mechanism of corrosion inhibition of mild steel in the acidic condition is dominated and precipitated by the formation of the Fe-chelate compound, which was confirmed by the SEM/EDS spectrum. The reactions were spontaneous, exothermic, and irregular and takes place on the surface of mild steel.