Facile fabrication of Zr2Ni1Cu7 trimetallic nano-alloy and its composite with Si3N4 for visible light assisted photodegradation of methylene blue

Coal fly ash supported CoFe2O4 nanocomposites: Synergetic Fenton-like and photocatalytic degradation of methylene blue

Rapid industrialization is causing a serious threat for the environment. Therefore, this research was aimed in developing ceramic cobalt ferrite (CoFe₂O₄) nanocomposite photocatalyst coated with coal fly ash (CFA-CoFe₂O₄) using facile hydrothermal synthesis route and their applications against methylene blue. The pristine cobalt ferrite photocatalyst was also prepared, characterized, and applied for efficiency comparison. Prepared photocatalyst were characterized by X-ray diffraction (XRD), fourier transformed infrared (FTIR) spectroscopy, X-ray photoelectron spectroscopy (XPS), and scanning electron microscopy with energy dispersive spectroscopy (SEM/EDS). Optical response of catalysts was check using photoluminescence spectroscopy (PL). pH drift method was used for the surface charge characteristics of the material under acidic and basic conditions of solution pH. The photocatalytic degradation potential of all the materials were determined under ultra-violet irradiations. The influencing reaction parameters like pH, catalyst dose, oxidant dose, dye concentration, and irradiation time, were sequentially optimized to obtain best suited conditions. The 99% degradation of 10 ppm methylene blue was achieved within 60 min of reaction time under pH = 5 and 7, catalyst dose = 10 and 12 mg/100 mL, oxidant = 12 mM and 5 mM for cobalt ferrite and CFA-CoFe₂O₄ photocatalysts, respectively. Afterwards, the radical scavenging experiments were conducted to find out the effective radical scavengers (˙OH, h⁺, and e^-) in photocatalytic degradation process. The kinetic study of the process was done by applying 1st order, 2nd order, and BMG models. Statistical assessment of interaction effect among experimental variables was achieved using response surface methodology (RSM).

Synthesis and potential applications of trimetallic nanostructures

The present review highlights the synthetic strategies and potential applications of TMNs for organic reactions, environmental remediation, and health-related activities.

Synthesis of the magnetic core-shell bi-metallic and tri-metallic metal-organic framework nanocomposites for dye adsorption

Bi-metallic and tri-metallic metal-organic frameworks (MOFs) supported on the magnetic activated carbon (MAC) were synthesized for the reduction of methylene blue (MB) concentration in the aqueous solutions. The adsorbent nanocomposites were characterized by applying the general tests including XRD, FTIR, FESEM, TEM, BET, and VSM. The XRD achievements demonstrated that crystalline structure of MOFs was derived on the MAC by the presented method. The core-shell morphology with nano-scale size of the magnetic carbonaceous MOFs was detected in TEM and FESEM micro-images. The acceptable magnetic strength of the prepared adsorbents was proved by using the VSM analysis. The important operating conditions including pH and temperature were also evaluated, while the other parameters were kept constant. The pseudo-second-order kinetic model was matched with the experimental data to show the kinetic behavior of the multi-component MOFs. The isotherm studies showed that the good agreement between the experimental data with both Langmuir model and the maximum capacities was calculated to be about 66.51 and 71.43 mg/g for the bi-metallic and tri-metallic nanocomposites, respectively. Regeneration experiments indicated that the fabricated adsorbents have an excellent reusing adsorption capacity which can be a proper selection for the industrial applications. PRACTITIONER POINTS: Bi-metallic and tri-metallic MOFs supported on the magnetic activated carbon were synthesized by the facile preparation method. Adsorption of methylene blue by using MOFs were successfully done. Nanocomposites were evaluated by XRD, FTIR, BET, FESEM, TEM, and VSM techniques. Maximum of adsorption capacity was observed for tri-metallic MOF as 71.43 mg/g.

Nickel and sulfur codoped TiO2 nanoparticles for efficient visible light photocatalytic activity

In this work, Nickel (Ni) and sulfur (S) codoped TiO2 nanoparticles were prepared by a sol-gel technique. The as-prepared catalyst was characterized using X-ray diffraction (XRD), Fourier transforms infrared spectroscopy (FTIR), FT-Raman spectroscopy, scanning electron microscopy (SEM), energy dispersive spectrometer (EDS), transmission electron microscopy (TEM), UV-Vis diffuse reflectance spectra (DRS) for investigating crystal structure, crystal phase, particle size and bandgap energy of these samples. The photocatalytic performances of all the prepared catalysts have been investigated for the degradation of methylene blue (MB) under visible light irradiation. It was noticed that Ni-S codoped TiO2(Ni-S/TiO2) nanoparticles exhibited much higher photocatalytic activity compared with pure, Ni and S doped TiO2 due to higher visible light absorption and probable decrease in the recombination of photo-generated charges. It was decided that the great visible light absorption was created for codoped TiO2 by the formation of impurity energy states near both the edges of the collection, which works as trapping sites for both the photogenerated charges to decrease the recombination process.

UV-Accelerated Photocatalytic Degradation of Pesticide over Magnetite and Cobalt Ferrite Decorated Graphene Oxide Composite

Pesticides are one of the main organic pollutants as they are highly toxic and extensively used worldwide. The reclamation of wastewater containing pesticides is of utmost importance. For this purpose, GO-doped metal ferrites (GO-Fe₃O₄ and GO-CoFe₂O₄) were prepared and characterized using scanning electron microscopy, X-ray diffraction and Fourier transform infrared spectroscopic techniques. Photocatalytic potentials of catalysts were investigated against acetamiprid’s degradation. A detailed review of the parametric study revealed that efficiency of overall Fenton’s process relies on the combined effects of contributing factors, i.e., pH, initial oxidant concentration, catalyst dose, contact time, and acetamiprid load. ~97 and ~90% degradation of the acetamiprid was achieved by GO-CoFe₂O₄ and GO-Fe₃O₄, respectively during the first hour under UV radiations at optimized reaction conditions. At optimized conditions (i.e., pH:3, [H₂O₂]: 14.5 mM (for Fe₃O₄, GO-Fe₃O_4, and GO-CoFe₂O₄) and 21.75 mM (for CoFe₂O₄), catalysts: 100 mgL⁻¹, time: 60min) the catalysts exhibited excellent performance, with high degradation rate, magnetic power, easy recovery at the end, and efficient reusability (up to 5 cycles without any considerable loss in catalytic activity). A high magnetic character offers its easy separation from aqueous systems using an external magnet. Moreover, the combined effects of experimental variables were assessed simultaneously and justified using response surface methodology (RSM).

Facile One-Pot Biogenic Synthesis of Cu-Co-Ni Trimetallic Nanoparticles for Enhanced Photocatalytic Dye Degradation

Biomolecules from plant extracts have gained significant interest in the synthesis of nanoparticles owing to their sustainable properties, cost efficiency, and environmental wellbeing. An eco-friendly and facile method has been developed to prepare Cu-Co-Ni trimetallic nanoparticles with simultaneous bio-reduction of Cu-Co-Ni metal precursors by aqueous extract of oregano (Origanum vulgare) leaves. Dramatic changes in physicochemical properties of trimetallic nanoparticles occur due to synergistic interactions between individual metal precursors, which in turn outclass the properties of corresponding monometallic nanoparticles in various aspects. The as biosynthesized Cu-Co-Ni trimetallic nanoparticles were initially analyzed using ultraviolet (UV)–visible spectroscopy. The morphology, structure, shape, and size of biosynthesized trimetallic nanoparticles were confirmed by transmission electron microscopy (TEM), scanning electron microscopy (SEM), and X-ray diffraction (XRD) spectroscopy. The elemental analysis was carried out by energy-dispersive X-ray (EDX) spectroscopy. Fourier transform infrared (FTIR) microscopy was carried out to explain the critical role of the biomolecules in the Origanum vulgare leaf extract as capping and stabilizing agents in the nanoparticle formation. Additionally, simultaneous thermogravimetric analysis (TGA) and differential thermogravimetry (DTG) analysis was also performed to estimate the mass evaluation and rate of the material weight changes. The photocatalytic activity of as biosynthesized trimetallic nanoparticles was investigated towards methylene blue (MB) dye degradation and was found to be an efficient photocatalyst for dye degradation. Kinetic experiments have shown that photocatalytic degradation of MB dye followed pseudo-first-order kinetics. The mechanism of the photodegradation process of biogenic Cu-Co-Ni trimetallic nanoparticles was also addressed.

Synthesis, Properties, and Biological Applications of Metallic Alloy Nanoparticles

Metallic alloy nanoparticles are synthesized by combining two or more different metals. Bimetallic or trimetallic nanoparticles are considered more effective than monometallic nanoparticles because of their synergistic characteristics. In this review, we outline the structure, synthesis method, properties, and biological applications of metallic alloy nanoparticles based on their plasmonic, catalytic, and magnetic characteristics.

The practical utility of the synthesis FeNi3@SiO2@TiO2 magnetic nanoparticles as an efficient photocatalyst for the humic acid degradation

Humic acid (HA) compounds in drinking water and wastewater disinfection processes are viewed as precursors of highly toxic, carcinogenic, and mutagenic disinfection by-product chemicals. In recent times, these compounds have gained considerable attention of scientists for their successful removal from aqueous solutions to permissible limits. To achieve this aim, the present study investigated, for the first time, the photocatalytical performance of the synthesis FeNi₃@SiO₂@TiO₂ nanoparticles for the HA degradation under different environmental conditions. The photocatalytic reactions were performed using ultraviolet (UV) radiation, whose intensity was fixed at 2500 μW/cm² throughout the experimental study. The characterization study performed, using specific diagnostic techniques, revealed the presence of several good morphological, magnetic, and catalytic specifications of the synthesized nanoparticles. The use of the simplified form of the Langmuir-Hinshelwood equation sufficiently describes the experimental data of the HA kinetic degradation, as it shows a high coefficient of regression values. Furthermore, the complete HA degradation was reached under conditions of pH = 3; initial HA concentration = 10 mg/L; FeNi₃@SiO₂@TiO₂ nanoparticles dosage = 0.01 g/L; and reaction time >30 min. Thus, the results obtained from this research suggested that the catalyst of FeNi₃@SiO₂@TiO₂ nanoparticles was an attractive, novel, and effective agent, which could be used for the degradation of HA in the photocatalytic processes.

Synthesis, characterization and photo-catalytic activity of guar-gum-g-aliginate@silver bionanocomposite material

The green mechanism for the synthesis of nanoparticles and their application to the wastewater treatment is of inordinate curiosity to the research community. Herein we outline a novel method for the synthesis of silver nanoparticles via a green route using alginate-guar gum blend (GG-Alg@Ag) and their application to degrade methylene blue (MB) dye. The synthesized material was characterized by FTIR, XRD, SEM-EDX, TEM, TGA-DTG, AFM, and UV-vis techniques. A combination of RSM and CCD was employed to compute the system and optimized values of various interacting parameters such as exposure time (120 min), pH (4.98), dye concentration (194 mg L⁻¹), and catalyst dose (0.07 g) with a photodegradation capacity of 92.33% and desirability 1.0. The mechanism of degradation reaction was best elucidated by the pseudo-second-order model suggesting chemical deposition of MB on the GG-Alg@Ag surface through followed by the reduction mechanism in the occupancy of visible light. The optical studies indicated a value of 2.5 eV by Tauc's plot for bandgap energy (E_g) for GG-Alg@Ag bionanocomposite.

The green mechanism for the synthesis of nanoparticles and their application to the wastewater treatment is of inordinate curiosity to the research community.