Effervescent tablets containing magnetic ionic liquids as a non-conventional extraction and dispersive agent for speciation of arsenite and arsenate in vegetable samples

Fast sequential multi element analysis of lead and cadmium in canned food samples using effervescent tablet-assisted switchable solvent based liquid phase microextraction (EA-SS-LPME) coupled with high-resolution continuum source flame atomic absorption spectrometry (HR-CS-FAAS)

An effervescent tablet-assisted switchable solvent based liquid phase microextraction (EA-SS-LPME) was developed for multi-element determination of Pb and Cd in various samples using high-resolution continuum source flame atomic absorption spectrometry (HR-CS-FAAS). The effervescent tablets were used for improving the extraction efficiency. Triethylamine as a hydrophobic solvent was switched to protonated triethylamine carbonate by CO₂ and used to extract dithizone complexes from samples. Calibration linearities were obtained from 0.06 to 10.0 mg L^-1 (Pb) and 0.02 to 1.50 mg L^-1 (Cd). LODs of the proposed method were 0.0195 (Pb) and 0.0068 (Cd). LOQs were 0.0649 mg L^-1 (Pb) and 0.0228 mg L^-1 (Cd) with %RSDs of 1.25%-1.69% (Pb) and 1.07%-1.64% (Cd). The proposed method was applied for the determination of Pb and Cd in water and canned food samples. The spiked recoveries were 82.3-119.0% (Pb) and 81.7-120.0% (Cd). In addition, the PF was 3.3, with EF at 1.4 (Pb) and 2.6 (Cd) obtained after extraction for under 8 min.

Magnetic Ionic Liquids in Sample Preparation: Recent Advances and Future Trends

In the last decades, a myriad of materials has been synthesized and utilized for the development of sample preparation procedures. The use of their magnetic analogues has gained significant attention and many procedures have been developed using magnetic materials. In this context, the benefits of a new class of magnetic ionic liquids (MILs), as non-conventional solvents, have been reaped in sample preparation procedures. MILs combine the advantageous properties of ionic liquids along with the magnetic properties, creating an unsurpassed combination. Owing to their unique nature and inherent benefits, the number of published reports on sample preparation with MILs is increasing. This fact, along with the many different types of extraction procedures that are developed, suggests that this is a promising field of research. Advances in the field are achieved both by developing new MILs with better properties (showing either stronger response to external magnetic fields or tunable extractive properties) and by developing and/or combining methods, resulting in advanced ones. In this advancing field of research, a good understanding of the existing literature is needed. This review aims to provide a literature update on the current trends of MILs in different modes of sample preparation, along with the current limitations and the prospects of the field. The use of MILs in dispersive liquid–liquid microextraction, single drop microextraction, matrix solid-phase dispersion, etc., is discussed herein among others.

Ultra-sensitive Sb speciation analysis in water samples by magnetic ionic liquid dispersive liquid-liquid microextraction and multivariate optimization

Efficient separation and preconcentration of inorganic Sb species in different water samples were performed in this work by a novel dispersive liquid-liquid microextraction (DLLME) method based on the application of a magnetic ionic liquid (MIL) and electrothermal atomic absorption spectroscopy (ETAAS) detection. The Sb(iii) species was selectively extracted by complexation with ammonium diethyldithiophosphate (DDTP) and 45 μL of the MIL trihexyl(tetradecyl)phosphonium tetrachloroferrate ([P6,6,6,14]FeCl4) as extractant. Subsequently, a magnetic rod was applied for phase separation, introducing it directly into the sample solution, and the MIL phase was then diluted in chloroform. Afterwards, 15 μL of this solution was injected into the graphite furnace of ETAAS for Sb determination. A multivariate study was performed to obtain the optimal extraction conditions. Selective reduction of Sb(v) to Sb(iii) with 1% (w/v) KI before preconcentration was applied for total inorganic Sb determination and Sb(v) concentration was calculated by subtraction. The analytical performance of the method included extraction efficiencies of 98.0% for Sb(iii) and 92.6% for Sb(v), LOD of 0.02 μg L-1 for Sb(iii) and relative standard deviations of 3.1% for Sb(iii) and 3.5% for Sb(v) (at 6 μg L-1 Sb(iii) and Sb(v), n = 10). The calibration linear range was 0.08-20 μg L-1. The results showed that the proposed methodology was highly sensitive and selective for Sb speciation analysis in tap, dam, mineral, wetland, underground, rain and river water samples.

Multi-Interactions in Ionic Liquids for Natural Product Extraction

Natural products with a variety of pharmacological effects are important sources for commercial drugs, and it is very crucial to develop effective techniques to selectively extract and isolate bioactive natural components from the plants against the background of sustainable development. Ionic liquids (ILs) are a kind of designable material with unique physicochemical properties, including good thermal stability, negligible vapor pressure, good solvation ability, etc. ILs have already been used in pharmaceuticals for extraction, purification, drug delivery, etc. It has been reported that multi-interactions, like hydrogen bonding, hydrophobic interactions, play important roles in the extraction of bioactive components from the plants. In this review, recent progress in the understanding of scientific essence of hydrogen bonding, the special interaction, in ILs was summarized. The extraction of various natural products, one important area in pharmaceutical, by conventional and functional ILs as well as the specific roles of multi-interactions in this process were also reviewed. Moreover, problems existing in bioactive compound extraction by ILs and the future developing trends of this area are given, which might be helpful for scientists, especially beginners, in this field.

Effervescence-Assisted Microextraction-One Decade of Developments

Dispersive microextraction techniques are key in the analytical sample treatment context as they combine a favored thermodynamics and kinetics isolation of the target analytes from the sample matrix. The dispersion of the extractant in the form of tiny particles or drops, depending on the technique, into the sample enlarges the contact surface area between phases, thus enhancing the mass transference. This dispersion can be achieved by applying external energy sources, the use of chemicals, or the combination of both strategies. Effervescence-assisted microextraction emerged in 2011 as a new alternative in this context. The technique uses in situ-generated carbon dioxide as the disperser, and it has been successfully applied in the solid-phase and liquid-phase microextraction fields. This minireview explains the main fundamentals of the technique, its potential and the main developments reported.

The speciation of inorganic arsenic in soil and vegetables irrigated with treated municipal wastewater

An efficient method using vortex-assisted microextraction based on a deep eutectic solvent followed by graphite furnace atomic absorption spectrometry was developed for the determination of arsenic species in soil and vegetables irrigated with treated wastewater.

Designing a new type of magnetic ionic liquid: a strategy to improve the magnetic susceptibility

In order to improve the magnetic susceptibility, MILs were prepared by incorporating lanthanide ions in both the cation and anion.