Computational optimization of bioadsorbents for the removal of pharmaceuticals from water

Integrated full-scale solar CPC/UV-LED–filtration system as a tertiary treatment in a conventional WWTP for agricultural reuse purposes

Today, the emergence of increasingly restrictive treatment and reuse policies make the implementation of full-scale tertiary treatment, capable of improving the quality of water, a priority. Full-scale TiO2 photocatalysis systems are resulting in a promising option, since TiO2 is commercially available. However, questions such as how to work continuously during day/night irradiation cycle, or the removing of TiO2 in outlet flow are still unresolved. In this work, a full-scale system integrating a solar CPC/UV-LED step combined with commercial microfiltration membranes was installed in a conventional WWTP for agricultural reuse purposes. After optimization, 0.5 g/L of catalyst and combined SOLAR + UV-LED showing the highest pharmaceutical removal percentages, while a self-designed UV-LED included in the own reaction tank resulting in higher efficiencies compared with commercial lamps. Longer membrane surface area decreased fouling problems in the system. However, 60 min of irradiation time was necessary to reach the most restrictive water quality values according with (EU 2020/741). After optimization step, total costs were reduced by 45%. However, it was shown that a reduction in operating and maintenance costs, along with the development of more effective and economical commercial filtration membranes is a key factor; therefore, working on these aspects is essential in the treated water cost reduction.

Graphical abstract

Optimizing microwave-assisted production of waste-based activated carbons for the removal of antibiotics from water

This work aimed at the microwave-assisted production of activated carbon (AC) from primary paper mill sludge (PS) for the adsorption of antibiotics from water. Production conditions, namely pyrolysis temperature, pyrolysis time and activating agent (KOH):PS ratio, were optimized as a function of product yield, specific surface area (S_BET), total organic carbon (TOC) content and adsorptive removal percentage of two target antibiotics (amoxicillin (AMX) and sulfamethoxazole (SMX)). Under the optimized conditions (pyrolysis at 800 °C during 20 min and a KOH:PS ratio of 1:5), a microporous AC (MW800-20-1:5, with S_BET = 1196 m² g^-1, TOC = 56.2% and removal of AMX and SMX = 85% and 72%, respectively) was produced and selected for further kinetic and equilibrium adsorption studies. The obtained results were properly described by the Elovich reaction-based kinetic model and the Langmuir equilibrium isotherm, with maximum adsorption capacities of 204 ± 5 mg g^-1 and 217 ± 8 mg g^-1 for AMX and SMX, respectively. Considering the satisfactory comparison of these results with the performance of commercial and alternative AC produced by conventional pyrolysis, this work demonstrated the feasibility of the microwave-assisted production of environmentally and energetically sustainable waste-based AC to be applied in the efficient removal of antibiotics from water.

Efficient solar heterogeneous photocatalytic degradation of metronidazole using heterojunction semiconductors hybrid nanocomposite, layered double hydroxides

This study focuses on the synthesis of various nanocomposites with heterojunction structures, MgAl-LDH (LDH = layered double hydroxides) hybrid with semiconductor such as MoO₃ and CuO. These solids were synthesized by co-precipitation method at constant pH and have been characterized extensively using atomic absorption spectroscopy (AAS), X-ray diffraction (XRD), Fourier transform infrared (FTIR) and transmission electron microscopy-energy dispersive X-ray (TEM-EDX) methods. The catalytic activity of nanocomposites was tested in the photocatalytic degradation under solar irradiation of emerging pollutants as the pharmaceutical metronidazole (MNZ). The experimental parameters, including initial MNZ concentration, the nature of oxide incorporate in the photocatalyst, catalyst loading were explored. All the synthesized samples showed high photocatalytic performances; the highest photocatalysis efficiency was achieved with the photocatalyst dose 1.5 g/L and initial MNZ concentration of 10 mg/L at neutral pH. The photocatalytic experimental results were fitted very well to the Langmuir-Hinshelwood model. From the obtained results the calcined LDH/semiconductors could be efficient for the photocatalytic process under solar irradiation of pharmaceuticals and may contribute in environmental remediation.